Develop Bugs

[Q] I'm Convinced my phone is Bricked

I just purchased this phone (i9100) last night after a long travel to track it down. today I simply wanted to update the firmware on it and I was using Odin3 v1.85 to do it but It failed and stayed like that for an hr with the phone in the download mode. I finally disconnected the phone and started it back up and it said " firmware upgrade encountered" with the phone on icon on the left a yellow triangles in the middle and a computer on the right side. Almost looks as though the symbols and words are cutting off the screen.
I can boot into the Download mode but the computer does not recognize the phone anymore nor does Odin or Kies. So I cant even attempt to re-flash the damn thing... I'm so upset right now and feel like taking a hammer to this damn phone...
Any help would be greatly appreciated. I've don't everything when it comes to drivers uninstalling Kies, using other computers without Kies installed, different ports and cables. I've done it all as far as i can see.... also I cant return the damn thing as i didn't buy it from a store. so im **** out of luck if i cant get this working.... PLS HELP!

Are you sure you are downloading the right version of the drivers? I ask because it sounds like you bought the international galaxy s II and not the Epic 4G Touch but you asking the question in the E4GT forums.

The phone is Sprint branded and so is the box.

jettienne12 said:
The phone is Sprint branded and so is the box.
Click to expand...
Click to collapse
Okay, so for future reference... you have the D710, NOT the i9100. (The i9100 is the international SGS2, different enough from the Epic Touch that you can't flash i9100 firmware.)
That said, if you can get into download mode then all is not lost!!
Restart your computer. Also, when you use odin, be sure to go into your Windows task manager and close any Kies tasks/processes that may be running in background. You only need Kies for the drivers it provided when you installed it onto your pc.
Suggest you put your phone into download mode, and follow the instructions in the 1st post in this thread:
http://forum.xda-developers.com/showthread.php?t=1282420

I tried the instructions in the link. however, the problem seems to that the phone is not being detected by the computer or the drivers dont seem to be working. I tried this on my other computer and while the phone is in download mode it is still not being detected by the computer or odin.... what can be causing this as before the firmware update that failed it was being detected perfectly fine.

I pretty much have the exact same problem as posted here.
http://forum.xda-developers.com/showthread.php?p=18176145#post18176145

jettienne12 said:
I pretty much have the exact same problem as posted here.
http://forum.xda-developers.com/showthread.php?p=18176145#post18176145
Click to expand...
Click to collapse
Sorry to be the bearer of bad news, but I was never able to get any computer to recognize the phone in that state. I was able to take it to the Sprint store and they ended up giving me a new one for a small service charge. Since you didn't get it at a store I would contact Samsung and give them the story that cooza suggests in the thread you linked. Good luck and post back if you ever get it working, I am still curious as to what was wrong.

The only thing that might be hampering your effort is Kies might be still active. I overlooked this instruction (as was mentioned in a previous post). Before starting Odin or connecting your phone go into Windows task manager (ctrl/alt/del) and click on processes. Scroll down and you'll probably see a Kies process running. End that process, then try it again.
.....

Sorry but Kies has been completely uninstalled from this computer and the other computer.

are you plugging the phone before or after entering download mode?

I did both before and after to see if that would make a difference, but no go.

jettienne12 said:
Sorry but Kies has been completely uninstalled from this computer and the other computer.
Click to expand...
Click to collapse
I thought you needed the drivers from Kies?
.....

I installed the drivers without it, I downloaded the drivers for my model phone from another member who suggested it.

Try deleting the drivers that u have and reinstalling kies. Use different usb ports.
Sent From My Evo Killer!!!

i would reinstall kies..... or if you have a linux box maybe try heimdall > http://forum.xda-developers.com/showthread.php?t=755265 to flash

Guys, I tried Ubuntu but with no luck. The computer simply will not detect the phone. At this point I believe only Samsung can fix or replace this. I will contact them tomorrow and see. Maybe they will do it for free or maybe they will charge a small fee (small I hope if any) but thank you all for the help.

phone not showing in odin

i'm running aokp build 30. i'm wanting to flash a new rom but all of a sudden my phone is not being recognized by my PC. can't mount storage and its not showing up even in odin. never had problems till now. i've tried different cables and usb slots but no matter what i do its not being recognized. any ideas? plz help? thx in advance.
also, the phone will charge plugged into pc but wont do anything else.

mcniglet said:
i'm running aokp build 30. i'm wanting to flash a new rom but all of a sudden my phone is not being recognized by my PC. can't mount storage and its not showing up even in odin. never had problems till now. i've tried different cables and usb slots but no matter what i do its not being recognized. any ideas? plz help? thx in advance.
also, the phone will charge plugged into pc but wont do anything else.
Click to expand...
Click to collapse
Have you rebooted your computer? Reinstall driver? Perhaps try another USB port...

ndmoh1 said:
Have you rebooted your computer? Reinstall driver? Perhaps try another USB port...
Click to expand...
Click to collapse
tried all of those.

Are you using Kies for the drivers? I thought Kies interfered somehow and it was recommended to just install the full driver setup standalone.
Also, have you tried a different pc yet?

Also make sure you have USB Debugging enabled.

tdunham said:
Are you using Kies for the drivers? I thought Kies interfered somehow and it was recommended to just install the full driver setup standalone.
Also, have you tried a different pc yet?
Click to expand...
Click to collapse
havent tried a diff pc yet, however i can get into recovery but it wont format anything nor can i do a factory reset, it just sits there until i pull the battery "formating system/data/etc"
just tried new pc. it showed up on it but when i odin anything it hangs on "data.img". bricked?

mcniglet said:
havent tried a diff pc yet, however i can get into recovery but it wont format anything nor can i do a factory reset, it just sits there until i pull the battery "formating system/data/etc"
just tried new pc. it showed up on it but when i odin anything it hangs on "data.img". bricked?
Click to expand...
Click to collapse
Possibly. Have you tried to odin the one-click-root back to stock rooted yet?
First thing I would do personally. Also, swap cables again and try a different usb port. I would plug into the rear usb if possible too. Front usb ports are prone to interference since they're wired via a cable from the motherboard. And do not use a usb extension cable (found this out the hard way too). Good luck.

mcniglet said:
havent tried a diff pc yet, however i can get into recovery but it wont format anything nor can i do a factory reset, it just sits there until i pull the battery "formating system/data/etc"
just tried new pc. it showed up on it but when i odin anything it hangs on "data.img". bricked?
Click to expand...
Click to collapse
Agreed with previous poster - you may be bricked, seems oddly familiar to this issue:
Stuck at "Data.img" thru Odin
As sfhub has mentioned you can and should try the Odin OC again to confirm. But if it says the same it's fairly certain that the eMMC is damaged and the phone is bricked.
If you try again and it has the same results you may want to post more details on that thread. It's been a good attempt to try and document each person's case and try to find what is causing this to happen. The more info the better to troubleshoot, such as what you tried to flash and how you were flashing (were you going back to GB + CWM to flash ICS, for example)

All of a sudden phone will not connect to pc.

Alright I am running cm9 and have been for weeks with no issues. I got the new galaxy s3 and installed the drivers on my pc to root it and all that. I want to change roms on my E4GT though so I go to plug it in and it charges but will not connect so I figured I had to reinstall the usb drivers for my e4gt so I did and still nothing. I am in no way a newb i have flashed tons of roms and I know I did not do anything wrong. I believe I am just missing a driver. Can someone point me in the right direction? I have the latest version of kies installed and the drivers straight from samsungs website.

Made a little progress but not much. I realized I didnt have usb debugging enabled so I enabled that but now when I plug it in it just says usb debugging enabled instead of asking if I want to mount as storage device I have tried rebooting phone and pc several times. I am running out of ideas.

Did you get the drivers by installing Samsung Kies?
I ran into a similar issue once. I removed all Samsung software with all devices disconnected, did a reboot, re-installed a new copy of Kies, and when I plugged in the device, I opened the notification and told it to skip searching Windows Update.
Also, make sure you are plugging it into a powered USB port, so one on the back of your computer. Sometimes laptops don;t provide enough power either. My girlfriend's OG Epic refused to flash on my MacBook Pro, but worked fine on a desktop.
Latest version of Samsung Kies: http://org.downloadcenter.samsung.com/content/SW/201105/20110512115717796/Kies_2.3.2.12054_20_1.exe

Thank you very much i will give it a try and report back.
Sent from my SPH-D710 using XDA

Mattheyu said:
Did you get the drivers by installing Samsung Kies?
I ran into a similar issue once. I removed all Samsung software with all devices disconnected, did a reboot, re-installed a new copy of Kies, and when I plugged in the device, I opened the notification and told it to skip searching Windows Update.
Also, make sure you are plugging it into a powered USB port, so one on the back of your computer. Sometimes laptops don;t provide enough power either. My girlfriend's OG Epic refused to flash on my MacBook Pro, but worked fine on a desktop.
Latest version of Samsung Kies: http://org.downloadcenter.samsung.com/content/SW/201105/20110512115717796/Kies_2.3.2.12054_20_1.exe
Click to expand...
Click to collapse
Actually no i did not get the drivers by installing kies because I already had it i got the sprint sph d710 usb drivers. Should I uninstall those and just install kies?

Well this is a rediculus problem that I am having now.. I cant install kies because it is saying I am not connected to the internet and I clearly am as I am posting this on the same pc that I am trying to install on.. I have tried rebooting the pc that does nothing.

Alright I got kies to install but still the same thing when I plug the phone in it says usb debugging enabled i really have no idea what is going on.

have you tried different ports on your computer, also have you maybe tried a different computer. If not it could be phone issue I fried my usb board on mine. best bet to try that is to flash another rom if possible and see if it you can connect to computer

scud626 said:
have you tried different ports on your computer, also have you maybe tried a different computer. If not it could be phone issue I fried my usb board on mine. best bet to try that is to flash another rom if possible and see if it you can connect to computer
Click to expand...
Click to collapse
I have tried different ports but not a different comp. Ya I am gonna flash a new rom and see if that helps. How could I have fried the usb board though? I havent touched the phone in days since I got the gs3.

Yup Just flashed the new Super Nova rom and now everything is working again, thank you very much for all the help and if anyone hasnt checked out that rom yet they need to its awesome!

[Q] USB/Computer connection issue

Hello XDA!
I don't want to post a wall of text (not that tall of a wall, at least), so, I'll try to get to the point quickly. And yes, I have done a lot of searching, both on XDA and Google, and that will be proved soon enough with the solutions that I've tried so far.
The problem I'm currently experiencing is when I connect my phone to my computer, it charges but it isn't recognized. There is no USB notifications, no phone in My Computer, and no Windows pop up, whether it's a pop up asking me to install drivers or an unknown device has been connected, nothing. Mind you, everything has been working flawlessly, this just randomly, and I really do mean randomly, started happening. The phone has never been dropped and there is no water damage. I'm still using the USB cable that came with the phone. And, if it matters, I'm rooted, running the leaked LI8 JB ROM, stock kernel, and UVLEM baseband.
Here's a list of said solutions that I've tried so far:
Using a thin paint brush, wet the tip a little with alcohol and tried cleaning out the USB port
Connecting to a different computer, connecting with a different cable, connecting to any other USB ports on the computer
After making Nandroid backup: Data wipe/factory reset, flashing a different ROM
Remove Samsung USB drivers and reinstalling, also tried installing Samsung Kies
Uncheck USB debugging and restarting, checking USB debugging and restarting
Dialled *#7284#, select Modem, then reselect PDA, changing Qualcomm USB settings and changing it back to MTP + ADB
Turn off phone, remove battery for 30 sec, reinsert and boot up (soft reset to reset internal circuitry as described by a Samsung live chat service tech)
I might've left out a couple, but please do enlighten me of methods that you might know, I'll be sure to try it or let you know if it's already been attempted.
..also, when connected to my PC, under Settings > Battery, it shows "Charging (AC)" IIRC, this should be showing "Charging (USB)".
This next attempt stood out to me. I decided I would try and go back to the stock firmware, one where I would have to use Odin3. So, I put the phone in Download Mode, open up Odin3, connect the phone, and I get a pop up in Windows! It's trying to install drivers, and fails. I can't flash the stock Samsung firmware if I wanted to, even for warranty purposes. I do currently have the USB drivers installed, but my PC hasn't gone through the driver installation for when the phone is connected to the computer. So, I'm assuming that is why this is failing? I'm not entirely sure. But, when I saw this, I unplug the phone and plug it back in numerous times, to rule out that this might be a hardware problem. And, every time I plug it back in, it tries to install the drivers but fails. So, it's detecting my phone in Download Mode. I reboot and hope that it will detect normally, but no, it doesn't...
As a last resort, I went to Samsung.com and chatted with a service tech, he runs me through two procedures that I haven't done, the 'soft reset' and a 'master reset', which is done through Settings > Back up and Reset > Factory Data Reset. Neither worked, so, he then checks my IMEI and finds that I am still under the 1 year warranty and files a ticket for repair service. I asked him if there is a replacement warranty and he says that is done through my service provider (T-Mobile) with the Premium Handset Protection service, which I didn't add. Not because I didn't want to, but I can explain in later posts if someone is interested in why it wasn't added. So, now I have the return label in my inbox ready to be printed, taped onto a box containing my phone, and sent out. But, I can't go through with this because I have a custom ROM on the phone. There is no counter because I've already used Triangle Away, AFTER this started happening.
I am completely stumped... Any information is greatly appreciated!
EDIT: Also, I've disassembled the phone to check the MicroUSB port to see if any pins or prongs might've came loose. Everything is in tact.. I also wanted to see if the MicroUSB port was replaceable because I was able to find a spare MicroUSB ports on a website. But, it seems that the port isn't easily replaceable. It doesn't look removable, and I'm uncertain if it can be de-soldered to solder a replacement one on. Also, some thing caught my eye when I had it disassembled. There were two components of the phone that had SGH-I747 imprinted on them. I wasn't able to take pictures as I was in a rush to get it put back together, but thought it was of interest to bring up.

How do you have a custom ROM if you flashed the stock one? I'm confused..
Try installing drivers through the toolkit.

If windows recognized it in Download Mode, keep trying to unplug and replug the cable in the same and different ports until it installs?
This happened once on my Galaxy S 4G.

Uninstall all related drivers, kies, etc. Restart pc and download and install these drivers. (Should be latest)
http://d-h.st/zya
Or download and install latest version of kies. Drivers included.
Try connecting again.
Sent from my SGH-T999 using xda app-developers app

psykhotic said:
How do you have a custom ROM if you flashed the stock one? I'm confused..
Try installing drivers through the toolkit.
Click to expand...
Click to collapse
I was never able to flash the stock firmware because my computer fails to install drivers for it. I've also tried using the drivers from the toolkit and it gave me no results.
theexel said:
If windows recognized it in Download Mode, keep trying to unplug and replug the cable in the same and different ports until it installs?
This happened once on my Galaxy S 4G.
Click to expand...
Click to collapse
I just hopped on right now after trying the different USB ports on my computer while in Download Mode. Same deal, it detects, tries to install drivers, then fails. It's coming up as an Unknown Device.
DocHoliday77 said:
Uninstall all related drivers, kies, etc. Restart pc and download and install these drivers. (Should be latest)
Or download and install latest version of kies. Drivers included.
Try connecting again.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
I currently have the latest Kies installed. I'm going to uninstall and give that link a shot, though. Hopefully, Odin3 will be able to detect it, at least, so I can get the stock firmware back on this thing...

DocHoliday77 said:
Uninstall all related drivers, kies, etc. Restart pc and download and install these drivers. (Should be latest)
Or download and install latest version of kies. Drivers included.
Try connecting again.
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
No luck with those drivers neither..... =/

What version of Windows are you running?

Aerowinder said:
What version of Windows are you running?
Click to expand...
Click to collapse
Windows 7 x64

I had the same problem. Tried uninstalling and and reinstalling drivers. Only thing that worked was restoring my pc to factory condition and starting over. Sucked but it worked
Sent from my SGH-T999 using xda premium

jasonpantuliano said:
I had the same problem. Tried uninstalling and and reinstalling drivers. Only thing that worked was restoring my pc to factory condition and starting over. Sucked but it worked
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Thank you for your input, but I doubt this would work in my situation. Ive tried connecting it to my laptop and another computer in the house and they both do not detect the phone. However, i would consider going that route as a last resort if there arent any other ideas.. i just need Odin3 to recognize it so i can revert and send it back in..
Any other suggestions, XDA? And thank you to those that responded!

johnx818 said:
Thank you for your input, but I doubt this would work in my situation. Ive tried connecting it to my laptop and another computer in the house and they both do not detect the phone. However, i would consider going that route as a last resort if there arent any other ideas.. i just need Odin3 to recognize it so i can revert and send it back in..
Any other suggestions, XDA? And thank you to those that responded!
Click to expand...
Click to collapse
I had the same issue. Got my phone replaced and it worked fine.

eldgrim said:
I had the same issue. Got my phone replaced and it worked fine.
Click to expand...
Click to collapse
And that is exactly what im trying to do..

SAMSUNG epic 4g stuck on boot screen after trying to restore Stock Rom

I was running CM10 but I got a message whenever I got into the Camera App that said "Unfortunately, Gallery has stopped working", after a research in here I found that I wouldn't get that msg again if I installed this "gapps-jb-picasa-20121011-signed" thing.
I did, but when I got into my Camera App, I didn't have the other options like "Image Effects" and all that stuff.
So, what I did was to Restore my phone from my BackUp folder that I've created before installing CM10, but for my surprise I got a msg saying "VolumeError" or something like that and other things that I can't really remember... and as a good Mexican that I am, I ignored it and hit the Reboot System Now..
What happened next almost made me cry...
I was expecting to get in my stock rom without any problems and yadda yadda but... OH SURPRISE!
I got stuck on the boot screen, where it says "Samsung" and the website of it and I didn't freak out... I waited like 5-6 mins and took the battery out. When I turned again, I tried to get in Recovery Mode but the screen just kept turning off and on and saying the exact same thing, the "Samsung" logo and it's website.
I hope you can help me and please answer me. I don't know if I'm 1000000% screwed but I will only wait for the worst. Sorry for my bad english and don't hate me for being mexican
I don't know if I can get into my phone from my PC but whenever I plug my phone in, it just loads it as if it was in Charging Mode
PLEASE HELP ME!
I BEG YOU!

Flash again CM10 with wipe data, cache, dalvik
If still stuck
Odin to stock ROM, you can search on google to odin the epic
Sent from my JellyBeer v.4.14 epicmtd (b3)

Questions go in Q&A
Thread moved
Friendly Neighborhood Moderator

Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21

AndyYan said:
Like @dropple said, it seems you stuck "SAMSUNG" and in this case you can't get into recovery so you can't flash CM10 as of now. Go find some tutorials and Odin back to stock via download mode. Then install CWM recovery if you want and do whatever you like. Should get you outta trouble.
Sent from HTC Incredible S @ PACman v21
Click to expand...
Click to collapse
Thanks to Everyone!
I solved this like 2 hrs after all this happened.
I got it by Odin. I couldn't go into Recovery Mode, but I got in Download Mode and do it by Odin.
Sorry, I'm a n00b to all this.
Greetings from México and thanks for all your support.

Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?

To the OP:
I would follow the instructions in this video from the part where qbking77 talks about putting the phone in download mode, as you presumably did when you first rooted your phone. Download all the files linked/referenced on the site, especially the Samsung mobile drivers, Odinv3 1.87, CWMRecovery, and the deOxed versions of the stock ROM. In sum:
1) get into recovery mode by holding onto the volume down, camera buttons, and then without letting either of those go, press and hold the power button.
if you get into recovery mode, skip to step 4
2) while your phone is completely off, hold onto the "1" button on the slide out keyboard first, then without letting the 1 button go, press and hold the power button until you're in download mode.
3) flash the version of Clockworkmod
4) once in recovery mode, wipe your phone, clear the cache, and dalvik cache, and then flash the deOxed version of the stock ROM
niteNarmor said:
Here's a weird one for you,
Same thing as OP stated. Device is stuck on logo. Can't get into CWM. Was on People's Rom. Device was lagging really bad. Then the system requested superuser permissions. Yes the system requested. Being as I did not request it, I declined. Shut the device down to see if that would help with the extremely bad lag (i mean BAD lag. Like..........................ok it does something then.......................................................................ok it does something else. 10-20 seconds lag)
Connect device to computer to Odin back to Stock or whatever ROM would have worked, computer recognizes device..... wait for it.......
But in download mode Odin does not see it. Com Port will not illuminate. Tried 3 different cables. Tried 6 different USB ports on computer. Still nothing.
Any ideas, because I'm all out?!?
Click to expand...
Click to collapse
Do you have the mobile drivers installed on the computer you're trying to connect your phone to?

Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".

niteNarmor said:
Yes. The drivers have been installed previously. The computer will see the device as "Samsung SPH-D700 Card USB Device". But Odin3 1.85 will not see it.
EDIT: When I put device into download mode and connect to computer, the computer only sees it as "Gadget Serial".
Click to expand...
Click to collapse
Uninstall and reinstall drivers.
Sent from my SPH-D700 using Tapatalk 2

Have already done that. But just for laughs, I did do it again with no change.

can you get your D700 into download mode as described above?

Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.

niteNarmor said:
Yes I can get into download mode but without Odin recognizing the device (not computer. The computer recognizes the device) there is not much I can do.
Click to expand...
Click to collapse
Try to install another version of Odin or getting Odin from a different server.
My phone is fully recovered and now I'm only SuperUser 'cause I don't want any CM by now.
Greetings from Mexico!

I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
EDIT: I have now downloaded and tried 4 different Odin programs with no avail. Again, that makes 6 Odin programs, 6 different USB ports, 3 different cables with the same exact results. The computer recognizes device but Odin will not.

niteNarmor said:
I'm using the same version of Odin I used to root the device. Would a different version really help and if so, what version to use?
I actually have a different version of Odin I used for another device and tried that one as well, with no luck.
Click to expand...
Click to collapse
Had a simular issue when I had two odins on the same computer, for a lark and as I had nothing better to do, tried installing drivers and one version of odin to a vertual machine running vista and checked to see if my computer's vertual machine would reconize and it did, I took it as a sine that at one point I had done something to my computer's main os sometime between rooting my epic 4g and frying it (recovering from a backup from a different parition layout I think, bad times with bootloops and seeing way to much of the samsung logo.) So as I'm not brave enough to run odin on vm I instead removed all of odin from my main os and all of the samsung drivers, then reinstalled rebooted and repluged my epic in, got reconition and reflashed with plesure.
The other issue might be that your computer is reconizing the device and try/failing/hanging and not allowing odin in. Had an issue when my computer was failing to pop up a 'what do I do with this' window and hanging round in the system. A reboot with the internet unpluged strangely solved that for some reason, might be the reboot might be the combo, but I find better connection reconition with my computer when I've fewer things connected.
Don't mind the spelling to much I clean up with my other device.
Sent from my T-Mobile myTouch 3G Slide using xda app-developers app

One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2

jeffreyjicha said:
One question I noticed that hasn't been asked is when you plug the phone into the computer while the phone is on, is usb debugging checked? If not, check it, and reinstall drivers again.
Sent from my SPH-D700 using Tapatalk 2
Click to expand...
Click to collapse
Phone does not boot past the "Samsung - www.samsung.com" logo. Plus, as with all of my devices, USB debugging is always checked.
Thanks for the suggestion though. Always helps to double check things.
I believe I am going to take it to Sprint tomorrow.
If I can't get into it, they should not be able to get into to it either. If they can't get into it, HELLO WARRANTY....

Perhaps before doing the whole getting found out thing with the return center, perhaps they do know what they're doing, try rolling this link past your eyes?
http://forum.xda-developers.com/showthread.php?t=773032
I know I've been in your boot problem situation and recovered, it just took persistence and eyenumbing amounts of reading.
Note On the multiple Odin, USB, and driver installation: if you've access to another computer it could be worth wile to run once though on a previously virgin computer, meaning your phone and computers' USB's have never touched. Just do the installation, rebooting, and plugging in exasperatingly meticulous order.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"

Yep tried the "virgin computer" computer as well. The computer sees the device but Odin does not. Com light will not illuminate.

Sounds grim.
So to rap up all the cables, plugs, computer, and software with odin is out of the debug process.
So I did some digging into the past and if your computer is reconizing and odin is not then ADB (android debug bridge) and the sdk are the other option
http://forums.androidcentral.com/epic-4g-rooting-roms-hacks/33427-how-access-your-adb-shell.html
Ran across this and it might just be what you need. Its not quick but it has worked for me in the past.
The other thing that may work is ejecting the sd card and battery before doing anything. Though its likely something you've already tried.
Sent from either my SPH-D700 or myTouch3Gs using XDA app
"it never hurts to help"