Related
It us up and downloadable direct from Samsung (find links in the development threds).
I haven't seen if it was one-click-rootable.
If not, don't flash it. Wait for a pre-rooted repack.
-Roger
I havnt tried it but I was looking in the dev section and many confirmed the one click root 2.5.5 works.
Sent from my SPH-D700 using XDA App
Yes, I can confirm it is working.
CWM too?
10char
Yes. There weren't major changes since dk28 to break the one-click or cwm. I'm guessing z4root is still a no go since eb13 is still 2.2.1.
One Click Root 2.5.5 is working great. Phone rooted in less than 2 minutes
My brother just got a sprint epic. He wants me to root it and flash a custom rom for him. I have been reading as much as I can and I have downloaded the oneclick root version 3. I have also downloaded the midnight rom 4.0 and 4.1 update. I have a quick question before I start. Does the epic modem need to be flashed with an update before flashing this rom?
Yes, either update it with Odin or the EB13 modem. Zip
What if the Epic I bought is already rooted and I want a different rom or stock? Same thing?
Sent from my SPH-D700 using XDA App
judoka209 said:
What if the Epic I bought is already rooted and I want a different rom or stock? Same thing?
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Before you do this, You may want to learn the following terms from the Development area...
Odexed/Deodexed
RFS/EXT4
CWM 3/CWM 2.0.5/6
Reading about these will lead to to a lot of the answers you need to successfully flash a ROM to your brothers Epic.
what version firmware do you have....check in the about phone category on it.
i didnt use odin...i used the samsumg update which was very simple and worked well for me...had no problems updating my phone.
you need froyo to use the 1click root method with clockworkmod3 thats why im mentioning it.
the 1 click method was easy...just make sure you have the rom on your sd card so you can flash it....with that rom you get the kernel whic hyou need as well - it makes it easier since it does it in one step.
make sure you dont reboot the phone after you root but flash the rom first, otehrwise your phone iwl lget stuck and you will have to revert it.
I will wait to do anything until I get some details like what the phone currently has on it.
Here is the phone info:
FW 2.1-update 1
Baseband dk28
kernel 2.6.29
build number sph-d700 eclair di18
hw version d700.0.5
So it would be best to update to EB13 and then download the one click method for eb13 found here:
http://forum.xda-developers.com/showthread.php?t=897612
Then flash the midnight rom?
MrNybble said:
Before you do this, You may want to learn the following terms from the Development area...
Odexed/Deodexed
RFS/EXT4
CWM 3/CWM 2.0.5/6
Reading about these will lead to to a lot of the answers you need to successfully flash a ROM to your brothers Epic.
Click to expand...
Click to collapse
You do know the person you replied to wasn't the OP, and may not even have a brother at all?
Hi all, first.. I appreciate any help from this posting. Seriously!!
I've done rooting, s-off, roms, etc.. i'm pretty familiar with it all, just on another device (glacier)..
I'm a little lost when it comes to the epic and just need some direction so I can help my friend without bricking his phone..
What I want:
* root
* s-off
* clockwork
* custom rom
I found a rooting thread here: http://forum.xda-developers.com/showthread.php?t=770388. However I'm not sure if its the 'latest' method as I experienced the "phone not connected" problem. I plan on bypassing my usb hub tomorrow and try again.
Does this turn s-off? is s=on on this device? (i haven't looked yet).
Lastly, please recommend a rom! I'm running royalginger on my glacier and love it! (thanks faux!!)
This is a newly ordered device, appears to be running froyo? (2.2.1)
Once again, thanks for the shortcuts!
(yes, i did search.. still uncertain of appropriate steps)
http://www.youtube.com/watch?v=Wy2Et6qVGdo&feature=channel_video_title
Watch that. Teaches you about the Samsung Drivers you will need to install, how to root, and flash a SyndicateROM Frozen (great ROM)
Not sure about the s-off thing.
Hope this helps!
Bunch of other helpful videos and comments here too:
http://forum.xda-developers.com/showthread.php?t=1009997
There is no need for S-off on epic, I believe he is referring to Nand Unlock which you find on a lot of the HTC and some other devices.
Awesome! This appears to be exactly what I needed! Very much appreciated.
glad I also now understand the epic (or samsung in general?) does not used nand, and no need for s-off.
Thanks again! Ill get this buttoned up for my buddy tomorrow.
Sent from my HTC Glacier using XDA App
nicholasb said:
Awesome! This appears to be exactly what I needed! Very much appreciated.
glad I also now understand the epic (or samsung in general?) does not used nand, and no need for s-off.
Thanks again! Ill get this buttoned up for my buddy tomorrow.
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Are phone are not nandlocked line htc devices
Sent from my SPH-D700 using Tapatalk
Success!
I managed to screw it up and resolve it.. Here is the process i followed and problems i encountered with solutions.
i 1-click rooted based on the forum post and video after downloading all the necessary files...
Copied the rom over to the sdcard, booted into recovery and flashed the rom.
boned.. now it only boots into recovery.
Downloaded ODIN and updated rom (sorry, can't find the post.. it listed a replacement step 5 found here: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SPH-D700#Odin_Stock_Flashing)
Attempted to flash ODIN, which resulted in several failures and an issue where I couldn't actually connect to the device. I HAD to swap USB ports, this time to the front of the machine.
After flashing ODIN, it would still boot directly into recovery. So i decided to flash the rom found within the thread (http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SPH-D700#Odin_Stock_Flashing).
Success! Stock rom.. rooted, this time with clockworkmod 3 (this was a separate download, sorry.. lost the thread. file was cwm3.zip. Also contained the 1-click root process).
Booted into recovery, and successfully flashed the rom after wiping cache/davlik.
Once again, thanks everyone!
Glad those videos helped
Glad you for it man. Ues you need cwm3 for most of the roms now cause there are mostly ext4 rom/kernels and not rfs
Sent From My Evo Killer!
Samsung epic S-OFF?
I have a Sprint Samsung Epic 4g rooted. When I rename or delete stock apps they are instantly replaced. If the Epic doesn't need S-OFF (security off) as Onyoursix says, then how do I delete or rename stock apps and keep them off?
carrmic said:
I have a Sprint Samsung Epic 4g rooted. When I rename or delete stock apps they are instantly replaced. If the Epic doesn't need S-OFF (security off) as Onyoursix says, then how do I delete or rename stock apps and keep them off?
Click to expand...
Click to collapse
You need sdx app removal tool or root explorer, or mount the system directory as writeable in terminal. System is read only as default. You just need to be rooted and root explorer is great.
Sent from my SPH-D700 using XDA App
I have an unrooted Samsung Galaxy S2 Sprint version that I never rooted, and I just updated to ICS stock (over the air update). While I had rooted another, this is my wife's phone and I want to root it to get better control over the battery issues. I read the wiki, but it all was dated to before the update.
Do any of the rooting methods work once you have already upgraded to the latest ICS update that came from Sprint?
johnpent said:
I have an unrooted Samsung Galaxy S2 Sprint version that I never rooted, and I just updated to ICS stock (over the air update). While I had rooted another, this is my wife's phone and I want to root it to get better control over the battery issues. I read the wiki, but it all was dated to before the update.
Do any of the rooting methods work once you have already upgraded to the latest ICS update that came from Sprint?
Click to expand...
Click to collapse
I am unsure of the rooting methods at this point. Did you check the one click rooting sticky? I would put the phone in download mode and odin a rom of your choosing (like el29 from sfhub) then one click root, recovery and flash a rom of your choosing. This process is of course only if the existing methods don't work with the OTA.
Sent from my SPH-D710 using xda premium
Disregard the previous.
http://forum.xda-developers.com/showthread.php?t=1721229
Do this
Sent from my SPH-D710 using xda premium
EmperorX said:
Disregard the previous.
http://forum.xda-developers.com/showthread.php?t=1721229
Do this
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Thanks for this. Will give it a shot tonight. While I am new at posting here, I have used this forum many times. I appreciate everyone doing all of this hard work!
Root
Use the preserve data version and you won't lose anything like contacts, files etc.
Will this work on a Sprint Samsung S2 running...
All,
I'm a total noob to rooting etc. A few questions to those who have done this. I have a Sprint Galaxy SII (model SPH-D710) running 4.0.4 w/Kernel ver. 3.0.15-SPH-D710.FH13-CL663858 [email protected] #3 - First can this be rooted? Are there any drawbacks or issues doing so (things not working etc.)? What is the best process and can anyone direct me to the best method to date?
Thanks,
First:
http://forum.xda-developers.com/showthread.php?p=28507701
Second:
http://forum.xda-developers.com/showthread.php?p=31961585
Read the stickies. You'll gain allot from them.
Sent from my SPH-D710 using Xparent SkyBlue Tapatalk 2
Thanks for the info... Still looking to see if anyone can answer my other questions about rooting the ver, I have and if it's worth doing or if it's going to create more problems. Really just need to be able to use WiFi hotspot without getting jacked by Sprint.
Thanks..
gohuge said:
Thanks for the info... Still looking to see if anyone can answer my other questions about rooting the ver, I have and if it's worth doing or if it's going to create more problems. Really just need to be able to use WiFi hotspot without getting jacked by Sprint.
Thanks..
Click to expand...
Click to collapse
The second link in the post above yours answers the question.
Once rooted you can use wifi tether from play store.
Sent from my SPH-D710 using xda app-developers app
You can also take a look in my signature. I have a guide to manually rooting if not all, most ICS powered devices on the sgs2 epic 4g touch.
Here is my little guide: http://tinyurl.com/icsroot
gohuge said:
Thanks for the info... Still looking to see if anyone can answer my other questions about rooting the ver, I have and if it's worth doing or if it's going to create more problems. Really just need to be able to use WiFi hotspot without getting jacked by Sprint.
Thanks..
Click to expand...
Click to collapse
You have to remember that even though you are saying you are a noob it does not mean that you should not read, read, read and then read some more. Honestly I have no problem with your questions but if you took some time to read stickies and info in the forum you would have found the answers to your questions. Also a Google search referencing Wifi Hotspot and not being rooted would of taken you to FoxFi. I suggest you give that a try prior to rooting if thats all you really need.
Remember either xda or Google is there to help you but they can not if you do not ever use them properly.My last piece of advice if you are not one to do reading or not one to really want to take risk. DONT ROOT try FoxFi or the host of other tether options that dont require root
I second using Febby's method - that's how I would do it. Its the scalpel vs. ax analogy - Febby uses a scalpel, those who re-flash an entire rom use an ax. Both work if you follow directions.
Only down side to febby's method is yellow triangle. It is easy to get rid of any way.
Sent from my SPH-D710 using xda app-developers app
Alternatively if you want Superuser, busybox and su instead of Supersu I have this .ZIP file here:
http://garwynn.rainmotorsports.net/subusybox.zip
It's the same one that I use for the rooted packages.
How about JB?
My question is similar, only my phone (a Sprint Galaxy S2 [SPH-D710]) is already updated OTA to Jelly Bean. I'm looking to root only (keeping the stock ROM). Can someone point me to the correct guide for this?
Do I just use the GB27 One-Click from here?: http://forum.xda-developers.com/showthread.php?p=31961585
With that One-Click, are these the correct instructions?: http://www.rwilco12.com/Files/Devic...Sprint) (SPH-D710)/Tutorials/SPHD710-Root.php
In the above instructions is mentions flashing a stock kernel to remove the Yellow Triangle and reset the Odin count, but if a stock kernel is what I am going for in the first place, is there a way to save a step?
Are these instructions a better way to go?: http://www.android.gs/root-galaxy-s2-official-jelly-bean-4-1-2-xwlsn/
Or how about these instructions?: http://www.sxtpdevelopers.com/showthread.php?t=166
This is my first android phone, so I am completely new to this. Can someone please set me straight? You guys are awesome!
Ace_7 said:
My question is similar, only my phone (a Sprint Galaxy S2 [SPH-D710]) is already updated OTA to Jelly Bean. I'm looking to root only (keeping the stock ROM). Can someone point me to the correct guide for this?
Do I just use the GB27 One-Click from here?: http://forum.xda-developers.com/showthread.php?p=31961585
With that One-Click, are these the correct instructions?: http://www.rwilco12.com/Files/Devic...Sprint) (SPH-D710)/Tutorials/SPHD710-Root.php
In the above instructions is mentions flashing a stock kernel to remove the Yellow Triangle and reset the Odin count, but if a stock kernel is what I am going for in the first place, is there a way to save a step?
Are these instructions a better way to go?: http://www.android.gs/root-galaxy-s2-official-jelly-bean-4-1-2-xwlsn/
Or how about these instructions?: http://www.sxtpdevelopers.com/showthread.php?t=166
This is my first android phone, so I am completely new to this. Can someone please set me straight? You guys are awesome!
Click to expand...
Click to collapse
OK,
You are another admited nooby, and that is OK.
However please, please take some time and read throught the stickies, how tos and follow up posts to the Original Posts.
You WILL save yourself a whole lot of time, frustration and possible flaming.
If you want the latest JellyBean Stock follow the insturctions here. They are detailed and precise.
It is the one-click root method that will give you the ernel, ROM and Modem in one shot.
You will NOT have a custom recovery (with CWM) and will NOT have the yellow triangle.
Not that you must run the one-click 'as administrator' first AND put your phone into download mode before before plugging it into the PC.
If you want a custom recovery (Garwynn's or Agat's) then you can keep the yellow triangle away by using Mobile Odin Pro. BUY it in the Play Store. Download the custome recovery of your choice and open Mobile Odin, Select Kernel, navigate to the .tar file you've transfered to your SD card and 'flash firmware'.
Really though please take some time, don't be impatient. It can save you making an expensive paperweight and have a taste of sh%t in your mouth.
Good luck.
Thanks!
leaderbuilder said:
OK,
You are another admited nooby, and that is OK.
However please, please take some time and read throught the stickies, how tos and follow up posts to the Original Posts.
You WILL save yourself a whole lot of time, frustration and possible flaming.
If you want the latest JellyBean Stock follow the insturctions here. They are detailed and precise.
It is the one-click root method that will give you the ernel, ROM and Modem in one shot.
You will NOT have a custom recovery (with CWM) and will NOT have the yellow triangle.
Not that you must run the one-click 'as administrator' first AND put your phone into download mode before before plugging it into the PC.
If you want a custom recovery (Garwynn's or Agat's) then you can keep the yellow triangle away by using Mobile Odin Pro. BUY it in the Play Store. Download the custome recovery of your choice and open Mobile Odin, Select Kernel, navigate to the .tar file you've transfered to your SD card and 'flash firmware'.
Really though please take some time, don't be impatient. It can save you making an expensive paperweight and have a taste of sh%t in your mouth.
Good luck.
Click to expand...
Click to collapse
Thanks. Your link is the link that I list at #5, above. I took the time to read through many many threads on this, but with so many unfamiliar terms and procedures, I wanted to make sure that I was following the method that will get me the results that I am after. Thanks so much for the confirmation!
I was recently asked to post some threads here on XDA with the tutorials I have on my site. As time permits I will be posting a series of threads here to the Q&A section that will hopefully answer most questions that might come up.
If you can't find your answer in one of my threads I would highly recommend BluesRulez One Stop FAQ Thread. It is an awesome resource and has answers to just about every question I've seen come up!
__________________
This thread details the process of how to root your device without having to flash a full stock ROM. This method works for the Sprint, Boost and Virgin Samsung Galaxy S2 (SPH-D710, SPH-D710BST and SPH-D710VMUB).
This method uses an Odin One-Click Kernel to install a kernel that includes a Custom Recovery. Once booted into the Custom Recovery you can then flash Superuser which will root your phone and give you Superuser access.
Prerequisites:
A PC running Windows with the Samsung Mobile Drivers Installed. The Samsung Mobile Drivers are available here.
Any One-Click Kernel (preferably from the Android version you will be using, i.e. GB, ICS or JB).
All Sprint One-Click Recovery kernels can be found here.
For this particular tutorial I used the following kernels:
Gingerbread: Chris41g's EL26 Stock CWM5 Repack
Ice Cream Sandwich: Agat63's tFI27 Stock Recovery Repack (rev 2)
Jelly Bean: Agat63's Source-Built GB27 Recovery
Superuser (or SuperSU, MIUI Security, and etc) in a flashable zip, saved on your Internal or External SD Card. For this method I used SuperSU v1.25 (but any SU in a flashable ZIP should work). You can download several different versions here.
Although not required it is recommended that you have Samsung Kies installed on your PC as well. You can download Samsung Kies here.
Side-Effects:
This method will trigger the Yellow Triangle upon start-up and will increase your Odin count.
It will also change your startup screen to look like the International GS2 startup screen.
Both of these side-effects are very easy to overcome due to the hard work of Chainfire and Garwynn. You can get TriangleAway from Chainfire's thread here.
For the rest of the tutorial please visit my site: www.rwilco12.com
Enjoy!
Reserved.
First..well 2nd to you!! Awesome work RW ..your time and dedication is GREATLY appreciated my friend!
Will any of these methods work with FL24? I'm new to rooting Samsungs and am used to simply rooting via exploits through ADB. I have the phone rooted (temp rooted?) via the exploit in Framaroot and am trying to get a custom recovery installed next to flash a ROM. Thanks!
DevonL said:
Will any of these methods work with FL24? I'm new to rooting Samsungs and am used to simply rooting via exploits through ADB. I have the phone rooted (temp rooted?) via the exploit in Framaroot and am trying to get a custom recovery installed next to flash a ROM. Thanks!
Click to expand...
Click to collapse
Yes it works.
Sent from my SPH-D710 using xda app-developers app
Does this exe. push the kernel/rom for me to flash automatically, or do I add that to the sdcard before I start?
KitWasHere said:
Does this exe. push the kernel/rom for me to flash automatically, or do I add that to the sdcard before I start?
Click to expand...
Click to collapse
The Kernel One-Click flashes the kernel and recovery together. They are combined on the E4GT.
hey first of thank you for your great work. but Im having issues. Once I reboot ,i had superuser app but nothing has root access. Im wondering what i did wrong. i have sph-d710vmub. Im trying to flash in recovery mode and nothing is working for me. I was told to flash a rooted rom but still anything that i try doing says installation aborted.. Please help;
yogurts said:
hey first of thank you for your great work. but Im having issues. Once I reboot ,i had superuser app but nothing has root access. Im wondering what i did wrong. i have sph-d710vmub. Im trying to flash in recovery mode and nothing is working for me. I was told to flash a rooted rom but still anything that i try doing says installation aborted.. Please help;
Click to expand...
Click to collapse
You might have to turn SU on depending on which version you flashed. Open the app and see if under settings you see something like "Enable SuperUser" and make sure it's enabled.
If that doesn't fix it we may need to try another zip with a different set of symlinks. Either way, we're here for you and will get you squared away.
rwilco12 said:
You might have to turn SU on depending on which version you flashed. Open the app and see if under settings you see something like "Enable SuperUser" and make sure it's enabled.
If that doesn't fix it we may need to try another zip with a different set of symlinks. Either way, we're here for you and will get you squared away.
Click to expand...
Click to collapse
what if flash the rooted stock rom that you have for sph-d710vmub on your website. will that help?. because i am about to flash it.
Ok i installed the rooted stock rom fj12 now i have rooted access. But my phone is asking me for an update. Cam i go ahead and update yes or no.?
Ok nevermind i updated to see what happend and it got me to fl26. No root access again. So im learning the hardway.
yogurts said:
what if flash the rooted stock rom that you have for sph-d710vmub on your website. will that help?. because i am about to flash it.
Click to expand...
Click to collapse
That'd do it too.
rwilco12 said:
That'd do it too.
Click to expand...
Click to collapse
Worked like charm. Now I need one piece of advice from you. Can i flash any sph-d710 to vmub?
yogurts said:
Worked like charm. Now I need one piece of advice from you. Can i flash any sph-d710 to vmub?
Click to expand...
Click to collapse
In theory yes. I'd recommend backing up your NV data just in case.
no
gfunk0311 said:
no
Click to expand...
Click to collapse
No?
yogurts said:
Worked like charm. Now I need one piece of advice from you. Can i flash any sph-d710 to vmub?
Click to expand...
Click to collapse
If you're asking - Can I flash VM builds on the Sprint D710, the answer is - yes. Did it when I tested the builds and everything worked properly.
If you're asking - Can I flash a VM build and be on VM service? Obviously you'll need to be activated to their service and provisioned properly. That's when you'd need to make sure that mmsc/apn/nv data is captured. I don't know if VM is a byod provider. (write that shiz down)
rwilco12 said:
In theory yes. I'd recommend backing up your NV data just in case.
Click to expand...
Click to collapse
gfunk0311 said:
no
Click to expand...
Click to collapse
rwilco12 said:
No?
Click to expand...
Click to collapse
Maybe??..
Couple Q's
Has anyone done this yet and how is it working out?
I am already rooted but on the stock FL24 and stock kernel, is that a problem?
Thanks for all this, I have been searching for 2 days and pulling my hair out to get this done. :good:
EVObastard said:
Couple Q's
Has anyone done this yet and how is it working out?
I am already rooted but on the stock FL24 and stock kernel, is that a problem?
Thanks for all this, I have been searching for 2 days and pulling my hair out to get this done. :good:
Click to expand...
Click to collapse
Yes. Many, many people have used this method successfully.
There's nothing wrong with a stock kernel, it just doesn't have a custom recovery packed into it or any kernel tweaks.
But I am confused... If you're already rooted why are you pulling your hair out?
rwilco12 said:
Yes. Many, many people have used this method successfully.
There's nothing wrong with a stock kernel, it just doesn't have a custom recovery packed into it or any kernel tweaks.
But I am confused... If you're already rooted why are you pulling your hair out?
Click to expand...
Click to collapse
Well mostly because I'm a noob lol. I heard also that if you do a factory reset with stock kernel you will brick it. But I want the extra options anyway. and really want to flash aJB ROM. Thank you very much for quick response, I shall give this a go in the morning.:thumbup:
Sprint GS3 Rooted, DaRTHSTAULKER X
EVObastard said:
Well mostly because I'm a noob lol. I heard also that if you do a factory reset with stock kernel you will brick it. But I want the extra options anyway. and really want to flash aJB ROM. Thank you very much for quick response, I shall give this a go in the morning.:thumbup:
Sprint GS3 Rooted, DaRTHSTAULKER X
Click to expand...
Click to collapse
K. Before you dive in too much further I would recommend doing a little more research. This device had had issues in the past that have made it very easy to brick. You should be very careful.
As a side note - This thread is a how to root thread but it sounds like you're already rooted. I don't know that there's any reason to reroot your device. You don't actually have to be rooted to get on JB either. You could just flash a one-click of a JB ROM.