I don't get any of the mount notifications I used to. No icons or ability to mount my card via USB. Either with internal storage or my SD card. Anyone having this issue or have a fix. Using nightly 40 of cm7 and used stock and invisiblek 37 kernels.
Yes, running CM7 EX v10, upgraded to CM7-GX4 for the WiMax support and just started having this problem. Mounts fine from the Clockwork Mod recovery menu, but not within the ROM.
am having the same problem i have just flashed my phone from cm7 without wimax to cm7 gb6 with wimax but use to be able to mount sd card but now i cant evertime i try to it reboots but get stuck at boot screen
Related
in clockworkmod, im trying todo a backup and i get:
can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk 1)
no such file or directory
cant mount /sdcard
i did the unrevoked3 flash method.
FYI: I can mount in usb mode as hard drive and load mp3s.
i installed cwm rom manager and it cant mount sdcard. is my sdcard bad?
binaryhat said:
in clockworkmod, im trying todo a backup and i get:
can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk 1)
no such file or directory
cant mount /sdcard
i did the unrevoked3 flash method.
FYI: I can mount in usb mode as hard drive and load mp3s.
i installed cwm rom manager and it cant mount sdcard. is my sdcard bad?
Click to expand...
Click to collapse
BUMP: I'm having the same problem, used gparted to repartition sdcard which allowed me to Mount USB storage. When i try to mount /sdcard card i receive
Code:
E:Can't mount /dev/block/mmcblk1p1 (or /dev/block/mmcblk1)
(Invalid argument)
Error mounting SDCARD:!
Are you using setcpu? I had same message the other day when in clockwork. I had an idea to try to set speed back to stock and unchecked set on boot, rebooted in to clockwork and all was well. Not sure if the clockspeed and and set on boot has anything to do with it, but I had a feeling that it messed with backup/restore when writing/reading a custom speed specified to boot with. Anyway it worked for me on virtuous with 7.28 radio and kings bfs 5
Had the same issue... Formatted the SD card (using the phone, under settings/sd card) and it never happened again.
vangorder said:
Had the same issue... Formatted the SD card (using the phone, under settings/sd card) and it never happened again.
Click to expand...
Click to collapse
to follow this up, i was experiancing similar problems
like an idiot i ejected the SD card with the power on (bad idea) and had to format it
the card worked fine under my rom (miui) but when i booted into clockwork mod v4.something
i unmounted the SD card in the phone options and formatted it, after re mounting it the phone gave me a notification that the SD card was an unsupported format
so what i did was click that notification and format the card again
i booted into recovery and it worked, i hope this helps someone in the future
edit: my phone is the samsung fascinate using the glitch kernel v11
koszor said:
edit: my phone is the samsung fascinate using the glitch kernel v11
Click to expand...
Click to collapse
So why are you posting in a Forum devoted to the HTC Droid Incredible?
Can't mount /dev/block/mmcblk error
I received a replacement Dinc from Verizon under the extended warranty. My problem is that the new phone won't backup or restore under CWM. I get a notice that "E: Can't mount /dev/block/mmcblkp1p (or mmcblk)
My old phone was rooted with the 2.3.4 version 4.06 GB stock rooted ROM. I made a nandroid backup with CWM recovery 5.0.0.6. So far all is good. The replacement phone with amoled screen came with GB 2.3.4. (unrooted and s-on.) Following the directions in Droid Forums I downgraded to 2.2, rooted using unrevoked3, turned s-off with unrevoked forever and reinstalled 2.3.4 version 4.06. All files found from links of XDA. (THANKS to all for the great instructions and files.)
But now on the new phone the nandroid backup and recovery from CWM won't work as I get the above error. II read that the sd card needs to be reformatted but when I put it back in the old phone, CWM works well without the error. Any suggestions?
fns001 said:
I received a replacement Dinc from Verizon under the extended warranty. My problem is that the new phone won't backup or restore under CWM. I get a notice that "E: Can't mount /dev/block/mmcblkp1p (or mmcblk)
My old phone was rooted with the 2.3.4 version 4.06 GB stock rooted ROM. I made a nandroid backup with CWM recovery 5.0.0.6. So far all is good. The replacement phone with amoled screen came with GB 2.3.4. (unrooted and s-on.) Following the directions in Droid Forums I downgraded to 2.2, rooted using unrevoked3, turned s-off with unrevoked forever and reinstalled 2.3.4 version 4.06. All files found from links of XDA. (THANKS to all for the great instructions and files.)
But now on the new phone the nandroid backup and recovery from CWM won't work as I get the above error. II read that the sd card needs to be reformatted but when I put it back in the old phone, CWM works well without the error. Any suggestions?
Click to expand...
Click to collapse
I would first try to format your sdcard fat32, but dont put any of the old files back on yet. Then with the blank sdcard inserted try to run a backup and see if it works. If not try reflashing cwm thru hboot. Also make sure you have superuser and busybox installed. mmcbkk0p1 is the data partition, see if you can manually mount it thru recovery in the mounts and storage menu.
cmlusco said:
I would first try to format your sdcard fat32, but dont put any of the old files back on yet. Then with the blank sdcard inserted try to run a backup and see if it works. If not try reflashing cwm thru hboot. Also make sure you have superuser and busybox installed. mmcbkk0p1 is the data partition, see if you can manually mount it thru recovery in the mounts and storage menu.
Click to expand...
Click to collapse
Its mmcblk1p1 he said. That isn't the data partition . I think it is sdcard. I think an sdcard format will do the trick.
Sent from my Galaxy Nexus using Tapatalk
very wierd
Just ran into the weirdest of problems. I had a rooted desire with Latest Clockworkmod Recovery and Villainrom. I saw some roms that required i had AmonRa so i flashed that using unrevoked. I did'nt like amonra's recovery so i used rom manager to flash clockworkmod back. It wouldn't stick permenantly, i.e. on a hard boot it'd revert back to amon ra.
Today i did the same, then asked rom manager to backup the current rom. It rebooted, amonra applied the clockwordmod update... then clockworkmod recovery started.. then started backing up the rom, upon completion it just rebooted without asking and kept on rebooting on the HTC logo, did'nt go ahead from that. I took the battery out and then re inserted it.
What happened next is weird. I user wiped the phone (using amonra) it gave me an error
Formattting SDCARD:.android_secure...
E:Cant mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(no such file or directory)
Error mounting /sdcard/.android_secure!
Skipping format...
Formatting CACHE:...
Skipping format of sd-ext
After this when the rom booted, the phone refused to recognise the sd card, and the charging light wouldn't turn on when i connected a usb cable OR the charger. I tried replacing another sd card that was working on my htc hero and it wasn't recognized either. I tried my orignal HTC Desire SD card (16 gb) in the hero and it showed a 14 gb unformatted partition on linux. when i tried mounting it , it mounted correctly. I immediately copied my data off the sdcard.
Please note that i had a 512 + 32 mb ext4/swap partition besides the rest of the fat32 partition which wasn't recognized in linux. After repartitioning the sd card i tried the sd card in the desire again but it's not working. Right now i can't mount or access any sd card in the desire, nor can i use adb to connect to the desire. I tried unrevoked to patch the clockworkmod recovery again but it doesn't recognise the phone at all. I'm thinking the rom is screwed up and i'm trying to patch another rom again on the phone but i can't since i can't access the sd card.
I'd also like to mention that using the amonra i tried repartitioning the sd card after this whole mess and it did'nt give me any error, so i'm thinking it did get to access the sd card.
Please any help would be appreaciated.
ok i just figured out that it's s-on on my phone now. So now i have a htc desire with amonRA recovery and S-on with Villainrom 1.0 installed on it. It's not showing usb debugging mode when i connect the data cable, nor is it accepting any sd card.
If possible can anyone tell me how i can :
1. Turn S-on without using usb debugging etc ?
2. Use unrevoked some other way
3. Unroot the phone to root it totally over again.
i had this problem the other day.
Check out this thread. worked for me. Read it through first so you know what your going to be doing.
http://forum.xda-developers.com/showthread.php?p=7616115#post7616115
THANKS ! I've finally got the sd card to be read but i'm wondering that post is for the legend, will that work on my desire ? i mean those image files etc ?
Thanks for the tip man, i googled the words (which i couldn't find to express my problem) i.e. bricked usb and found my solution for the desire here http://android.modaco.com/content/h...com/309939/usb-brick-rickrolled-b0rked-fixed/
SD Card Problems With Clockwork Recovery
Hi there XDA, basically everytime I have an SD-EXT partition on my phone (i always, always make them using Linux manually) if I format my SD-Card (which should only format the Fat32 partition, I run into a big issue. My SD-Card will un-mount, possibly format i don't know, then it won't remount. If I connect my phone to windows the SD-Card has all its partitions removed. Very strange?
Anyway I decided to switch to Oxygen 2.0.1 this morning, as it's a much more stable rom, and anyway I performed what I said above on Froyo 2.1 (DeFrost) and the SD-Card wouldn't mount, when I noticed that the SD-Card didn't have any partitions I formatted it using Windows. I then placed the update.zip file of Oxygen onto the root of my SD-Card.
I proceeded to Clockwork Recovery and selected the option 'Select .Zip from SD Card' and I was shocked to see something saying No Files Found. We I have tried everything to sort this out, and absolutely nothing seems to be working? I have used a Ubuntu Live CD to try and completely wipe and re-format my SD-Card which completed sucessfully, but no joy, i've tried all the options on Clockwork Recovery, nothing works, I used a 2GB SD-Card to install Oxygen and this worked fine, once the phone was booted everything would work including the 8GB Card if I switched them. I know I should just put up with this, but I need to fix this.
Does anyone know how I can get my card to work again thanks.
I have recently had issues with mounting in Windows 7. I can mount fine from recovery, however, I seem to have issues mounting from within CM7. Have tried default kernel, incredikernel, and tiamat. The sd card seems to mount for about 10sec then unmounts itself. I have uninstalled and reinstalled drivers with no improvement. Any advice? I am running nightly 31 currently and have had the issue since v29 at least. I was originally able to mount without issues. I have no idea what I have changed. If you think it is a rom issue and would benefit from a logcat let me know. Thanks.
Hello,
I've tried messing up a bit with my HTC Desire, too much apparently...
Right now, I'm running Revolutionary recovery, and a custom rom that refuses to load and stuck in reboot loop. I tried reflashing another rom and even going back to stock, but in the recovery screen each time I try mounting any kind of sd-card I get "E:Unable to write to ums lunfile (No such file or directory)"...
I tried using AndroidFlasher, but the program crashes...
Any ideas? someone?
Thanks!
I had the same problem, I needed to install another recovery then it worked
Sent from my HTC Desire using xda premium
I flashed new recovery, ClockWorkMod 5.0.2.0, and now when I click "mount USB storage" it actually works, but the sdcard still refuses to be mounted so all I get in the PC is nothing.
Am I getting close to the solution?...
Try AmonRA 2.0.1.
Also, can your read your card via other devices/card reader?
Possible USB brick, if the above mentioned 2 things won't work - fix in Devellopement section.
Search for desire usb brick fix. That should sort it out.
Sent from my Motorola Startac running Atari 2600 software!
Ok, problem solved, here's what I did:
1. Flash a new recovery, Amon Ra 2.0.0 to be exact.
2. Since the sdcard seemed to be bricked I flashed CyanogenMod 7 using the AndroidSDK (just search Google for "flashing rom without sd card").
3. CyanogenMod 7 actually worked, so I booted it up, formatted my sdacrd, and now it's working flawlessly.
Thank you guys for helping
Try the SD in another device like a card reader as said above....Could be a problem with it, I had the same issue until I fixed the errors on Windows.
Please stop writing your posts in bold, just a little advice.