ok..
so im stuck.. tried to reflash the stock DL17, using the downloads provided, including PIT (repartition checked).. via ODIN 1.3 to clear back to stock..
after flashing, the phone booted to DL17 - sort of.. no data was gone, all the wife's programs were there, and i got into a FC hell during setup. ACORE, GAPPS, pretty much every program.
then re-odined the DL17 by itself, no repartition, no pit..
now i cant get anything to flash...ODIN tells me it flashes fine, normal on there.. the phone does not hit the samsung logo.. goes straight to the android system recovery and i have NO hotkeys to select anything..
it says at the bottom..
"e:can't mount /dev/block/st111" (twice)
then under that it says
"update.zip gone"
ive tried every combo from the dev tools thread, and all flash fine via ODIN but go straight back to the android recovery, and i cant select anything..
anyone have any creative ideas?
First, "bricked" is used for when your phone does nothing.
Second, this isn't a development post. And read through stickies in general forum. This problem has been solved. Mostly from Irc.
Sent from my SCH-I400 using xda premium
geez im just going to leave this one alone lol
completly correct..my fault..i wasnt paying attention to where i was posting because of my frustration level..
and for the record i tried the heimdall magic fix in general section and it didnt work. phone starts to boot then shuts off. have to pull battery to get power. 3 finger recovery does not work either..just flashes the screen with samsung and dies again.
ciscogee said:
First, "bricked" is used for when your phone does nothing.
Second, this isn't a development post. And read through stickies in general forum. This problem has been solved. Mostly from Irc.
Sent from my SCH-I400 using xda premium
Click to expand...
Click to collapse
MIUI 1.12.9 RickS :: Glitch V13 :: ED05 Radio
Not sure txwolf and tb101 are resident fixers on that. Try to make Irc apmt. Good luck.
Moderator. Can you move post to general?
Sent from my SCH-I400 using xda premium
The fact that no data was gone the first time interests me.... Was it definitely a full system/data/cache/everything else tar?
I would download the EC07 full package, repartition, then try my magic fix....
Sent from my SCH-I400 using xda premium
trailblazer101 said:
The fact that no data was gone the first time interests me.... Was it definitely a full system/data/cache/everything else tar?
I would download the EC07 full package, repartition, then try my magic fix....
Sent from my SCH-I400 using xda premium
Click to expand...
Click to collapse
if i remember correctly, on irc, he said he flashed a rom that wasn't meant for the continuum, rather another galexy device..
well you surely are not bricked. but the cache partition is in deed messed up. (stl11 refers to the cache partition) unfortunatly, it seams as though you have done just about everything.
Try loading up heimdall and load only the pit, the kernel(imnuts hacked kernel is what i recomend using), and the modem/radio(ec07).
This should fix any partition issues. It will format the partitions in place where they should be but it will not write to the partitions. What i recommend next is different from most other things.
Hopefully if all is well, when you install the kernel it should fix the issues with the boot loader. boot into CWM if possible. Now try and flash a version of ec07.
If you are only receiving the stl11 issue all other partitions should be good. once the kernel and everything else is in place and you flash the system it should be good and boot up... hopefully
mrjake1970 said:
completly correct..my fault..i wasnt paying attention to where i was posting because of my frustration level..
and for the record i tried the heimdall magic fix in general section and it didnt work. phone starts to boot then shuts off. have to pull battery to get power. 3 finger recovery does not work either..just flashes the screen with samsung and dies again.
MIUI 1.12.9 RickS :: Glitch V13 :: ED05 Radio
Click to expand...
Click to collapse
Starts to boot? Where does it get to? Do you get into recovery, at all? Also, do you get samsung logo? Before you said it was booting straight into recovery. Has that changed after magic fix? I'd recommend doing a full ec07 stock with repartition in heimdall.
Thank you all..
I havent been to the IRC yet. Been trying everything else.
Here is the full story of the phone...
1. When the first ROM came out for this, I flashed it. Something (no idea what) borked it during the flash, and the phone wouldn't turn on. I could only get to CWM. I would try and wipe data, nothing would happen. I got a walk through from someone here on other stuff to try, which included mounting all the drives, and wiping them. I have never been able to mount (manually) any drive since - but it got me running again.
I was getting errors in CWM constantly.
2. No matter what i flash, or what (or how many times) i wipe data, datadata, system, ect.. whenever i flash anything the data from the old ROM remains on the phone and i end up in force close hell on the new ROM..
3. i probably the most stable ROM was EC03.. it worked but after a while would start random rebooting 4-5 times a day. ..so then wife wanted to try MIUINA.. we had her on V4 for a while. Then with upgrade to V5, things went bad again. I couldn't wipe data, ODIN the stock EC07 worked once, but the old data remained (all her settings/programs were force closing and old wallpaper remained.) then after that, I tried to ODIN MIUINA v5 again, ODIN said it worked, phone bootlooped into "stock" recovery, but gave the errors i posted above. no keypresses avail. t
tried heimdall fix all solution, now it boots to the SAMSUNG screen and hangs then shuts off, and wont turn on until a battery pull.
i cant 3 finger to recovery (wont let me, just hangs at samsung screen and then dies after about 2 minutes)
right now, i can get ODIN to work about half the time with the phone "taking" the flash, will get to the verizon logo and while building the dalvik, it dies, shuts off and then wont boot past samsung logo.
im going to try and see if i can get ODIN to let me flash CWM and get to cyan recovery and try a nandroid restore if it will let me.
can i use the DL17 stock MD5 file in heimdall? this is my first time using heimdall.. dont i need other files?
mrjake1970 said:
Thank you all..
I havent been to the IRC yet. Been trying everything else.
Here is the full story of the phone...
1. When the first ROM came out for this, I flashed it. Something (no idea what) borked it during the flash, and the phone wouldn't turn on. I could only get to CWM. I would try and wipe data, nothing would happen. I got a walk through from someone here on other stuff to try, which included mounting all the drives, and wiping them. I have never been able to mount (manually) any drive since - but it got me running again.
I was getting errors in CWM constantly.
2. No matter what i flash, or what (or how many times) i wipe data, datadata, system, ect.. whenever i flash anything the data from the old ROM remains on the phone and i end up in force close hell on the new ROM..
3. i probably the most stable ROM was EC03.. it worked but after a while would start random rebooting 4-5 times a day. ..so then wife wanted to try MIUINA.. we had her on V4 for a while. Then with upgrade to V5, things went bad again. I couldn't wipe data, ODIN the stock EC07 worked once, but the old data remained (all her settings/programs were force closing and old wallpaper remained.) then after that, I tried to ODIN MIUINA v5 again, ODIN said it worked, phone bootlooped into "stock" recovery, but gave the errors i posted above. no keypresses avail. t
tried heimdall fix all solution, now it boots to the SAMSUNG screen and hangs then shuts off, and wont turn on until a battery pull.
i cant 3 finger to recovery (wont let me, just hangs at samsung screen and then dies after about 2 minutes)
right now, i can get ODIN to work about half the time with the phone "taking" the flash, will get to the verizon logo and while building the dalvik, it dies, shuts off and then wont boot past samsung logo.
im going to try and see if i can get ODIN to let me flash CWM and get to cyan recovery and try a nandroid restore if it will let me.
can i use the DL17 stock MD5 file in heimdall? this is my first time using heimdall.. dont i need other files?
Click to expand...
Click to collapse
You will need the dl17 pit file. And to use heimdall, you need to break the tar down to its component files. I use 7zip for that, but winrar works too. I'll be in irc in 30 minutes, if you want to run through it.
thank you Txwolf1980 for the offer of an IRC chat, seriously..i just got this late this afternoon..i had to leave friday evening, and didnt get back until late.
i finally got the thing to boot..but it was out of total desperation, i started (logically, yet with reckless abandon, since I had nothing to lose at this point) flashing crap..
here is what i did to get this puppy running again..
ODIN, heimdall and CWM were doing nothing for me..no boot, no recovery, no 3 finger..nothing... still couldnt even boot into original system recovery..
since i have a fascinate, i had a few beers and decided to flash cwm4 (for the MTD ROMS) just to see what would happen...tried a 3 finger and it flickered the screen as if it *wanted* to go to recovery but didnt go into recovery, just kicked me back to the samsung screen..however i took the flicker as a good sign, maybe that jogged something somewhere..
i immediately reflashed the CWM adryn that is used for the continuum.. and 3 fingered after ODIN rebooted..
PROFIT! i now had the softkeys back to select the update zip for cyan recovery..
got into cyan recovery and went to mounts and storage, and mounted everything, wiped them (except for sd card) then unmounted them all and wiped them all again..
it took the commands.. i wiped the snot out of everything i could find to wipe.. i went back to install zip from SD card and flashed stock EC03 that i put on there months ago.. and hit reboot..
PROFIT! it booted.. it was all FUBAR, had screen flickering funny, and key presses were delayed by 3-4 seconds.. the phone was functional, calls, text, market all worked.. however, when the phone was powered off, it returned to stock (like a data wipe) upon restart. which was really weird..
f-it, i was booted.. and it was functional.. now to fix this for good...
i then did some research here, and found i was using the wrong PIT and EC07 ODIN files when flashing in ODIN.. found the right ones...and pulled battery, went to download mode, and flashed EC07 leak (production) with the I500 PIT, repartition checked..and ODIN immediately applied the PIT and flashed EC07...
the wifes phone is now running like a champ.. its not rooted, and is binged and bloated, but its looking like its completely fixed.. time will tell, but its been running for the last 6 hours now perfectly. I even rebooted 2x to make sure the changes/data/downloads stuck this time, and they did.
the wife threatened to snip off my giblets if i attempted to root it or mess with it anymore i tried to remind her that she is the one who liked the "cool other rom-thingies" but that didnt fly.. so i handed her the phone and said have fun....
sincere and heartfelt thanks to all who pitched in to the conversation to help... i hope that this post will help others who think their continuum is completely fubar..
im done messing with her phone. ill head back to flopping between ICS and MIUI on my fascinate where i know more abotu what im doing.. i haven't turned my fassy into a door stop in almost a year of HEAVY flashing..
So, to start off, I had CM7.2 on my epic 4g touch. It was working great but than I dont know why, I decided to upgrade it to CM9 just to get ICS taste. But than I went to system and did full system wipe and thats where it all started. It restarted and got stuck at big android guy logo with some square rotating on his tummy. It was there for good 10 mins when I decided to restart. Didnt work and kept going back there. I went to CMW and tried reflashing it didnt work. I tried different roms and than got stuck in boot loop. Than I went to download mode and tried to flash stockcmw_EL26.tar.md5 and I got cmw 5.0 something running. I than tried do clean wipe and install different roms. it will either get stuck at erasing /data or will not install roms at all. So now three days later. I am still stuck with a bootloop phone with nothing able to install.... PLEASE HELP ME!!! Its driving me insane. Also, I do have it flashed to boost which I really dont wanna loose. I also have nandroid backups which I tried to restore but they all fail to restore /data and restores everything else but ultimately, it wont still get the phone outta bootloop.
Your bricked. When it didnt boot up right the first time you should have odin'd back to EL29, or whatever.
Your data partition is jacked and you will need a replacement.
You should have installed it exactly like the instructions said.
Also you could not find an answer in the other 100 bricked threads in here... You are not the only one with this issue. Take a moment and read the results of others which may of saved you from the Brickhouse. Sorry not trying to flame you just this stuff has been all over the forum for days and days.. Oh yea using Touch CWM tisk tisk tisk....
Playya out!
@I_NOS,
Please consider moving further discussion here so others following can help in one thread instead of many:
http://forum.xda-developers.com/showthread.php?t=1504808
Ok, so I flashed a MIUI port for the AT&T Note 2, and it was disgusting...it crashed everything, and needless to say I ended up stuck at the boot logo for a long time. FINALLY managed to get it to flash via Odin...so I flashed Stock Rom...and now it's stuck on Samsung logo...Ok..so I go flash CWM...do a wipe and everything, and install CM10.1 via that...stuck at CM logo. I've left each ROM plugged in, stuck on boot screen for over 20-30 minutes each. I'm at a loss of what to do. Could I need to flash a kernel? or am I missing something obvious? The good news, I guess, is with a few steps, I can get into DL mode and use Odin, and I can flash CWM and get into that..but I can't inject anything into my phone so CWM can use it, I only have what's there now, which is CM10.1. I'm so mad...I've never had too many issues with ROMs but this one jacked things up badly...guess that's what I get for using a port even though it noted that everything was working now. Anyway...does anyone have any advice?
Edit: I flashed CWM, and tried to clear cache/dalvik then factory reset...the first two worked...as soon as I hit factory reset, that's where the screen goes black and it resets...it's like it just refuses to do it. I'm seriously at a loss here. Is it toast?
Edit again: sorry but I'm trying more to give more info. I went into CWM and went to advanced and started formatting one by one...it's when you hit format /data that it immediately dies and restarts. So..something weird is going on there. Can I use a PIT file for this phone, if it exists, to reformat and just get it going? I'm desperate...
Us this http://forum.xda-developers.com/showthread.php?t=2052779 on a PC.
Follow directions and Odin back to stock.
Sent from my SAMSUNG-SGH-I317 using xda premium
I have been using the i747z ROMs for quite some time and after trying a bunch of other ROMs I always reverted back to theirs. So when their 3.0 version came out with Android 4.3 I installed it, using ClockWorkMod recovery. Right after it installed, CWM displayed a message about the boot loader and to fix it. So I went ahead and did that (Don't really remember what the message was) What I know is that I lost root. Also the phone could not connect to the mobile network, only on Wifi. So this morning, I factory reset the phone again, and attempted to root the phone with Odin with CF-Auto-Root-d2att-d2uc-samsungsghi747 (which I had used when I first rooted the phone). Now the phone doesn't boot past the 2nd samsung logo, it starts out with the Samsung logo with the blue circle around it, then the AT&T Rethink Possible and then the plain white Samsung logo. Also, the LED has a slow blue flicker.
I can get the phone into download mode and I have used Odin to attempt to load the stock firmware and the stock bootloader. But after restarting the phone I can't get past the same screen described above.
I am pretty sure this is not related to the i747z v3.0 ROM but rather something a miss with the order in which things need to start in Android. I have done some reading on that but I am not sure what I need to do to correct this soft brick situation. ( I have googled "soft brick" as well)
Any thoughts would be greatly appreciated!
mozphoto said:
I have been using the i747z ROMs for quite some time and after trying a bunch of other ROMs I always reverted back to theirs. So when their 3.0 version came out with Android 4.3 I installed it, using ClockWorkMod recovery. Right after it installed, CWM displayed a message about the boot loader and to fix it. So I went ahead and did that (Don't really remember what the message was) What I know is that I lost root. Also the phone could not connect to the mobile network, only on Wifi. So this morning, I factory reset the phone again, and attempted to root the phone with Odin with CF-Auto-Root-d2att-d2uc-samsungsghi747 (which I had used when I first rooted the phone). Now the phone doesn't boot past the 2nd samsung logo, it starts out with the Samsung logo with the blue circle around it, then the AT&T Rethink Possible and then the plain white Samsung logo. Also, the LED has a slow blue flicker.
I can get the phone into download mode and I have used Odin to attempt to load the stock firmware and the stock bootloader. But after restarting the phone I can't get past the same screen described above.
I am pretty sure this is not related to the i747z v3.0 ROM but rather something a miss with the order in which things need to start in Android. I have done some reading on that but I am not sure what I need to do to correct this soft brick situation. ( I have googled "soft brick" as well)
Any thoughts would be greatly appreciated!
Click to expand...
Click to collapse
After flashing through odin did you format data?If not try it.
Go into recovery and wipe data.
**SOLVED**
Thanks xXFl4sh, I had tried that.
Solved!
Alright where do I start? How about RTFM Some how I had missed the part about flashing a bootloader and a modem after the ROM. Not recalling having to do that before, I skipped right over it. Once the recovery CWM 6.0.3.1 was finally loaded, getting the flashing the ROM, the bootloader and the modem was easy as usual.
The key was having to use Odin to install a recovery in .tar or .tar.md5 format since I could not access a Recovery Mode on the GS3, as well as a rooted stock image (I used root66_ATT_I747UCDLK3.tar.md5 which is a rooted Android 4.1.1 for AT&T) For the recovery, I couldnt' find a .tar or .tar.md5 for ClockWorkMod (did find a utility to convert it, but didn't want to introduce another variable into the mix) so I used one from Team Win Recovery (v2.6.3.0) and with that I loaded the CWM recovery. Once all of that was in place, I proceed to factory reset, clear data, cache, system and then flash the new ROM, bootloader and modem.
In all of this I learned quite a bit about the whole process and how to narrow down possible resolutions. I still see the "Rom may flash stock recovery on boot" message after flashing either a ROM, bootloader or modem, but just backing out without answering Yes or No seems to work. Also (and this may be related, I don't see the option to restart in recovery from shutdown menu). Don't really know what that's all about for now, and honestly don't want to mess around (at least for a while)
I know the steps are general, but I hope this can help some else if they get their devices in a soft brick situation. As for the i747z v3 ROM with 4.3, I really like it, everything works (Wifi,Blutooth,tethering) and the battery seems good as well.
Thanks!
So here's the back story. I'm usually good with roms/recovery/flashing. Even did some custom rom work on my old Galaxy S 4G, so not a noob. I have a Wind T999V.
Had Touch-CWM installed, ran a few 4.4 ROM's for a while, tried LP, Liquid smooth. Liked it ok, but wanted to try OctoROM LP. It needs TWRP. Had a few problems with TWRP before on my phone, the Wind variant seems somewhat different in small ways, but figured I'd give it a try again to flash OctoROM since it needs TWRP. Thought maybe the TWRP has improved since I tried last, so installed TWRP, tried to flash Octo, but TWRP wouldn't see my internal SD card at all. The same problem I had before. I didn't feel like digging out a SD card from my camera to put Octo on, so rebooted the phone, installed CWM back, rebooted again, got a bootloop somewhere along the way.
Figured I'd go with Odin back to stock and start over. Grabbed odin (hard now, lots of spam/scam copies) and my stock firmware for the Wind version from Doc's thread. Flash the tar, which took forever (used a sort of crappy cable) and it auto rebooted after like 20 mins of flashing, just stuck at the sammy logo for like 20 mins. Too long, still looped I think.
Grabbed a different cable and a newer version of a good odin I know from my network I had laying around, 3.09, and tried again. At the pulsing samsung logo again, going to wait, but if I did softbrick it, do I need to repartition and a pit file to get the FS back to something different than any of the KK or LP rom's I ran?
EDIT:
Read some threads and took doc's advice and booted into stock recovery and wiped data and cache, and it finally booted. Phew.