I tried to load truly epic 1.5 rom to device. All goes well and then "android" flashes in the swirly samsung s during boot up and then it becomes unresponsive and I have to remove the battery and start all over. I am using cw3 and had truly epic 1.2 working on it earlier.
However,
when I was loading 1.5 I may have pressed "update zip" option in cw and since then not even 1.2 will work again. I have not tried any other roms either.
Any suggestions are appreciated and Thank You in advance...
Thank you for your response. I did this several times and it is this is the result that I get. I even downloaded a different truly epic file from another source, flashed it, and same stuff.
Thats why its so frustrating. What else could it be? Again thanks for the any and all help..
Odin'ed to DI18 - success
Odin'ed to DK28 - success
Rooted and booted into 2.2 - success
Booted into Recovery - success
Flashed Truly Epic 1.5 - Result (success until the device reboots it has that strange "android" graphic that pops up in the middle of the "s". It it a horizontally placed graphic in the upright "s" during boot up.
Again the only thing that I did different was selecting that "update zip" from cw but if I odin'd everything back and started from scratch (6x at least) it should have wiped everything anyway right?
The device runs just fine on stock 2.2 but I really really enjoy the true epic rom. Im really baffled. So is my neighbor who is running 1.5 just fine. Cant be an equipment issue can it?
Thanks for the advice. Whew... I sure appreciate you sharing this info with me. I will give it a try and will post results. Thanks again. Hope this works....
Many thanks to newalker91. You helped out bigtime and all is well and working. Thanks a million for the info & step by step....
Related
Wellp. I win.
I win a no expenses paid trip to my nearest Sprint dealer.
Ever since I used unrevoked to root my phone in November, I've been voraciously digging through these forums for tasty roms. I've been snorting lines of Cyanogen, MIUI, and a myriad of other, well-designed roms.
Using a on older version of hboot (pre 1 methinks) I was able to avoid the latest hassles with ClockworkMod (plus, I down(up?)graded to 2.6 via RomManager).
Tonight, as I was enjoying some tasty foodstuffs at my local foodstuff vendor, my phone rebooted. Then, it rebooted again. Then again. I once made the folly of flashing a new rom without running the appropriate wipes, and was no stranger to the bootloop. I patiently fired up hboot (my poor volume rocker is all but wore out) and ordered up the trusty recovery mode.
...then it rebooted again... and again... and again.
PusSidiasus: ONOES! I HAVE THE WTFBBRICKED MY PRECIOUS!
SmartAsSidiasus: Hang on for a second, let's check the internet. Try this link: tinyurl.com/4vgeyeg
PusSidiasus: ...
Unfortunately, my internal dialogues are not nearly as witty. Also, my best attempts to de-brick-ify were for naught. Fastboot gave some wacky error message when I tried to flash a new recovery, and installing via PC36IMG.zip did nothing to improve the situation. I even went so far as to install a stock image someone pulled from an RUU (with a 2.02hboot, so as to avoid wimax woes)...
Still, a whole lotta nothing. I can't do anything beyond hboot, and whatever recovery image I install (Clockworkmod, AmanRa) the machine still bootloops.
At this juncture, I've resigned to taking the phone into the sprint store and playing dumb. It is a stock rom, though I hope the attendant misses the S-OFF bit at boot. Which brings me to my proper question:
1) Has anyone run aground a similar issue and found a way out?
OR...
2) Anyone know how to turn S-(back)ON in my current situation?
Any insight would be greatly appreciated. Also, you can rest assured that I'll be rooting again whatever phone I walk away with, and the work that is exhibited in these forums is amazing. Keep churning out wonderful roms and guides.
Sidiasus
(Currently, Sadiasus... )
First...... Wrong subforum. Try Q and A.
Second, in all your rom flashing, did you maybe forget to wipe, and re-wipe before your rom install?
Ah piss. I'll move subforums. Also, the last flash I ran (from Evervolv Gingerbread -> MIUI 1.1.07) I am quite certain I wiped. I may be mistaken, but non-wiped user data shouldn't bork recovery.
Happened to me when trying to root my brothers Evo. (Already had mine rooted). I thought the phone was bricked because there was no recovery installed and all that worked was hboot. I tried several different versions of PC36IMG.zip until 1 finally worked.
Cheers
Yes! try updating with PCM36IMG.zip ROm that should help you out, ex "Sprint lovers". Good luck.
sidiasus said:
Ah piss. I'll move subforums. Also, the last flash I ran (from Evervolv Gingerbread -> MIUI 1.1.07) I am quite certain I wiped. I may be mistaken, but non-wiped user data shouldn't bork recovery.
Click to expand...
Click to collapse
Recovery thing confused me a little bit. I didnt get in your post where that became a problem. If a phone bootloops all on its own, its usually due to wiping either not being done, or a certain recovery not wiping it correctly. At least that's what ive seen in all my reading. Hope you get this ironed out.
Mikedick said:
Recovery thing confused me a little bit. I didnt get in your post where that became a problem. If a phone bootloops all on its own, its usually due to wiping either not being done, or a certain recovery not wiping it correctly. At least that's what ive seen in all my reading. Hope you get this ironed out.
Click to expand...
Click to collapse
No problem, I tried to write in a more humorous style than the other "HALP" threads, and my ability to clearly relate the important details suffered. Thanks for the good wishes!
Etiquette question: I've duplicated this thread in Q & A, should I just delete this one?
Also, thanks to all for the lightning fast responses, trying more PC36IMG'ses.
Nah, just let it die.
Found like you're radio fried, it's a well known defect on some evos and incredibles. Try to put it in the fridge while turned off and afterward it may run for long enough to turn s-on.
Sent from my PC36100 using XDA App
Thanks for taking your time and helping me, I saw you guys(and girls) have done some pretty amazing things here at XDA. I just need some help with getting this Gingerbread ROM to work.
I'm using Supersonic 2.2.1 first off, and using the alter. recovery rom from Rom Manager.
Ok, so I rooted my phone using rEVOked and chose a ROM called Bc-Gingerbread-beta4. I'm not sure of the eact title used, but if anyones faimilar with Gingerbread ROMS, they should know what that is... It was on the EVO ROM page.
So at first, I was using ClockWorkMod Recovery (2.6.*) to try and install the ROM. I eneded up with status 7 ever time, so I tried to upgrade to 3.0.* (newest one) and recieved a error about not being able to flash. No details were given.
I tried flashing to the alternate recovery, and it worked. From their, i (un?)successfully installed the ROM according to the recovery application.
The status bar didn't move past the halfway mark, but i figured it was just how it worked..
Then, I tried to boot into the new ROM. I was on the HTC screen for about 3~5 minutes, then it showed me the android load screen instead of the usual Sprint/4G screen. From their, it was in a constant loop because every 3 to 4 seconds, it would take off the android logo, then place it back. I waited approx. 10 minutes... Nothing. Unfortunetly, the alternate screen doesn't have the option to browse for your nandroid back ups (mine aren't in /android) So i'm left with a relativly bricked phone until I can find a working ROM.
I have a microsd card reader.. so I'm not too terribly screwed, I just need help on what I did wrong, how can I fix it (if im able to), and what Gingerbread ROM I should use. It needs to be relativly stable. I don't care about 4G support, even though its almost everywhere in Atlanta. I'd like to have video rec. if possible. and 8MP support.
If it fits those standards, please, I'd like to hear what the community thinks is a great Ginger ROM.
Also, I'm using Windows. I have the adb shell installed, and im familair with basic-medium level terminal commands.
Edit: I'm going to flash again, using cm_supersonic_18.zip. It says installing update, but it says flash zip from sdcard in the main menu...
Edit #2: apparently it's a Cyanogen mod (#7)
Just keeps looping the android on the skateboard screen... I'm going to figure out how to get back to the clockwork recovery console and -hopefully- get this thing working.
Heres the main question at hand before you read my large summary.
1) Why is my ROM's boot image looping constantly?
2) Do I have to NAND again if I revert to a nandroid backup that was made before I nand'ed my phone?
Time for the long, and mostly pointless, summary:
I'm pretty desperate to get things running on a Gingerbread ROM, if you didn't notice in my last topic 2 hours ago.
Anyways, I'm trying to get cyanogenmod7, Stock Gingerbread 2.3.1, or heck, even eVOKINGS-gingerbread ROM to work.
So far, i've tried Cyanogenmod7 and Stock Gingerbread 2.3.1 on my evo; none of which have worked past the boot screen.
Lets take stock gingerbread for example:
I downloaded the new cyanclockwork recovery rom off of rom manager and flashed it after a *long* process of nand'ing and rooting again.
Then, I powered down, booted up, and went straight into recovery in the bootloader. I went to install ROM from SD->chose the .zip .
after waiting for awhile, it said the upgrade was complete (upgrade?)
*notice: the installation bar didn't move at all durring the installation process, if that makes a difference
I rebooted, and was greeted by the HTC screen while it spelt out q-u-i-e-t-l-y-b-e-a-u-t-f-u-l
Nothing happens after that.
It just shows the HTC screen again, getting stuck at the B in beautiful. Pretty much just looping over-and-over again.
Same thing happened for Cyanogenmod7, I was constantly being looped through the skateboarding-droid figure.
I'm doing something wrong here obviously, because all these ROM's have screen captures from a EVO 4G.
Does it make a difference if I use Clockwork recovery 3.0.0.7/6/5? or 2.6.7?
Please help.
I know all my questions are rather long and complicated, but im sick of being ignored at every forum (ubuntu forums, black ops, etc.)
Or I'm impatent and overestimated your forums activenes. No disrespect to the forums or devs (I thought your forum was really active)
Edit: If I for some reason can't get a 2.3.1 ROM to work, would someone kindly point me to a stable Froyo ROM they think is the best?
Have you use amo-ra?
Sent from my evil evo!!
rsjc741 said:
Heres the main question at hand before you read my large summary.
1) Why is my ROM's boot image looping constantly?
2) Do I have to NAND again if I revert to a nandroid backup that was made before I nand'ed my phone?
Time for the long, and mostly pointless, summary:
I'm pretty desperate to get things running on a Gingerbread ROM, if you didn't notice in my last topic 2 hours ago.
Anyways, I'm trying to get cyanogenmod7, Stock Gingerbread 2.3.1, or heck, even eVOKINGS-gingerbread ROM to work.
So far, i've tried Cyanogenmod7 and Stock Gingerbread 2.3.1 on my evo; none of which have worked past the boot screen.
Lets take stock gingerbread for example:
I downloaded the new cyanclockwork recovery rom off of rom manager and flashed it after a *long* process of nand'ing and rooting again.
Then, I powered down, booted up, and went straight into recovery in the bootloader. I went to install ROM from SD->chose the .zip .
after waiting for awhile, it said the upgrade was complete (upgrade?)
*notice: the installation bar didn't move at all durring the installation process, if that makes a difference
I rebooted, and was greeted by the HTC screen while it spelt out q-u-i-e-t-l-y-b-e-a-u-t-f-u-l
Nothing happens after that.
It just shows the HTC screen again, getting stuck at the B in beautiful. Pretty much just looping over-and-over again.
Same thing happened for Cyanogenmod7, I was constantly being looped through the skateboarding-droid figure.
I'm doing something wrong here obviously, because all these ROM's have screen captures from a EVO 4G.
Does it make a difference if I use Clockwork recovery 3.0.0.7/6/5? or 2.6.7?
Please help.
I know all my questions are rather long and complicated, but im sick of being ignored at every forum (ubuntu forums, black ops, etc.)
Or I'm impatent and overestimated your forums activenes. No disrespect to the forums or devs (I thought your forum was really active)
Edit: If I for some reason can't get a 2.3.1 ROM to work, would someone kindly point me to a stable Froyo ROM they think is the best?
Click to expand...
Click to collapse
I'm pretty sure you will still have nand unlocked. The only way you wouldn't is if you unroot.
Sent using my EVO running AZRAL X V 3.1
klquicksall said:
I'm pretty sure you will still have nand unlocked. The only way you wouldn't is if you unroot.
Sent using my EVO running AZRAL X V 3.1
Click to expand...
Click to collapse
Thanks
I should face-palm myself. I just read the sticked post and I'm going to try some of his suggestions. He pointed out why cyanogenmod wouldn't work.
My whole consept of the framework went out of the window, and now I think of it more like a standard linux distro, in terms of kernel->ROM relationship.
I don't think I need to have a custom kernel for the Gingerbread beta-4, but i'll look it up just in case... Though I don't have a clear idea on how to flash that.
And to the person 2 above, im using Cyanclockwork. For whatever reason, I like its design verse RA recovery. I might try RA recovery just to see if it works better, as everyone has said it does.
I think i needed to clear all my caches and then load the ROM.
So I did a wipe of everything (data, darvik, cache) and trying to install the GB ROM. My boot screen is *still* looping. Do I need to get another kernel? Is it like flashing a ROM? Where are they at? I didn't see any in the software section...
Hello,
Last night I rooted my device using this (http://forum.xda-developers.com/showthread.php?t=1265429) method and file from zedomax and everything worked great except when I booted my device there was a yellow triangle with a black “!” in it. I figured that just indicated the device was rooted or running a 3rd party kernel so I didn’t worry about it.
Today I launched my camera app and it failed to load the interface but showed the image from the camera momentary then crashed back to the home screen. I restarted my device and when the device restarted it was very slow and unresponsive and after unlocking it my live wallpaper was gone replaced with the last background I used before selecting a live background a couple weeks back. No icons or widgets loaded and I am unable to open the settings tray. The only things I am able to do with the phone is pull down the notification bar, respond to text messages, adjust the volume and hold power to restart the phone. All of which are very slow and delayed.
When I connect the device to my computer windows is no longer able to load the drivers and Kies is unable to connect with the device. I am not sure what caused this or how to resolve this issue so any advice or known fixes would be fantastic! I am unable to get to clockwork mod to restore my backup and I am unable to get to Kies or the phone settings to do a factory reset so I really don’t know what to do they were supposed to be a last resort and now I don’t even think I can do them. I am an experienced techie but I am new to android and this is the first device I have rooted so any advice would be great no matter how basic it may be.
UPDATE: I just connected the phone via USB to my laptop at work and it was able to discover and install everything it needed to connect with the phone. I am installing Kies now so at least there is hope of a factory restore, although I really hope it doesn't come to that!
Boot into download mode and flash the stock eg30 tar file from crawrj.
Sent From My Evo Killer!!!
Thanks Already started doing that waiting for it to download now
Still no touchwiz... great!
Try flashing a stock rom via clockworkmod.
efarley said:
Still no touchwiz... great!
Click to expand...
Click to collapse
You can root again and restore your backup, or go to this website www.lostandtired.com (midnight roms blog) click on android development and download and flash the sprint bloat and TW restore zip. Hope that helps.
I flashed the stock rom which didn't change anything so then I used clockworkMod to do a factory reset which ended up trapping me into a boot loop. I could use Odin to flash new roms but the device would never go past the 4G logo
I ended up taking the device back to Best Buy and since the loading screen showed the stock rom and they couldn't get past the 4G logo I just had to say it wasn't rooted and they gave me a new one.
I would love to know if anyone has any idea of what went wrong here so that I can feel comfortable rooting again. Also if anyone has some basic articles handy that teach basics of rooting that would be great, I didn't even know about clockwork mod until after I had this problem so knowing things like that earlier would have helped a lot I think. I'll be spending the weekend looking up everything I can find on the subject so any reading you guys can suggest would be fantastic.
efarley said:
I flashed the stock rom which didn't change anything so then I used clockworkMod to do a factory reset which ended up trapping me into a boot loop. I could use Odin to flash new roms but the device would never go past the 4G logo
I ended up taking the device back to Best Buy and since the loading screen showed the stock rom and they couldn't get past the 4G logo I just had to say it wasn't rooted and they gave me a new one.
I would love to know if anyone has any idea of what went wrong here so that I can feel comfortable rooting again. Also if anyone has some basic articles handy that teach basics of rooting that would be great, I didn't even know about clockwork mod until after I had this problem so knowing things like that earlier would have helped a lot I think. I'll be spending the weekend looking up everything I can find on the subject so any reading you guys can suggest would be fantastic.
Click to expand...
Click to collapse
If you a clockwork and "stock rom" you were still rooted...Doing a factory reset will send you into bootloop when rooted. Trying to flash other roms on a bootloop is not going to work. You need to have grabbed a backup such as Zedo has on his post and put the backup in clockwork folder on your phone. Then flash that in CWM. Would of brought you out of bootloop to a stock rom with his kernal. Now you can flash Roms and kernals or could of flashed crawf or anyone else FULL stock rom and been back to stock kernel and rom and not rooted.
dallastx said:
If you a clockwork and "stock rom" you were still rooted...Doing a factory reset will send you into bootloop when rooted. Trying to flash other roms on a bootloop is not going to work. You need to have grabbed a backup such as Zedo has on his post and put the backup in clockwork folder on your phone. Then flash that in CWM. Would of brought you out of bootloop to a stock rom with his kernal. Now you can flash Roms and kernals or could of flashed crawf or anyone else FULL stock rom and been back to stock kernel and rom and not rooted.
Click to expand...
Click to collapse
Ohhhh that's what happened! Awesome thanks. I will be much better prepared with backups out the wazoo this time haha.
Now if only I could figure out why Touchwiz died in the first place hmmm....
I hope you can figure it out, just postin here to say that when I saw this thread, it reminded me of the thread over in the EVO forums about the guy who claimed that sprint removed his Sense from his phone.
Khilbron said:
I hope you can figure it out, just postin here to say that when I saw this thread, it reminded me of the thread over in the EVO forums about the guy who claimed that sprint removed his Sense from his phone.
Click to expand...
Click to collapse
haha SPRINT removed it?! So that person thinks sprint monitors every device and has a team of techies on staff to hack your phone and brick it if you break their rules?... yeah that totally makes more sense than a file got corrupted when you were messing with the kernel.. some people maybe shouldn't be rooting their devices in the first place haha
So I I've had 2 different recoveries so far that have worked fine.. both came from Rogue though. One was from the 1.5 kernel (Hitman) which installed CWM Touch recovery, the other came with the normal recoveries based off CW 5.0.2.7. They were working fine until I installed Calkulin's Rom(2.8.1). Not sure if they're just incompatible or what, but when I go to recovery it shows the background image of the recovery but none of the options show up. It shows for about half a second and then it goes back to the original boot screen, then to the 2nd screen and turns on. So it basically skips right through the recovery and reboots. Do I need a new Rom or can I fix this? I really like the battery life and visuals of Calkulin's Rom and would love to be able to keep it.
EDIT: One more thing.. Since I installed the ROM, I've been getting market error 492. It doesn't allow me to install anything in the market..
I haven't tried a full wipe yet, so I guess I'll try that and then see how that works with the recovery and Rom..
I did the same thing to my phone this week, and I'm running Blazer, so i'm sure it has nothing to do with either ROM.
Not sure how I caused it but with so many folks running both without this error, I'm guessing that your issue (like mine was) was probably some how self induced.
I flashed back to stock and started over, and things have been working great. Might be worth a shot flashing back, or restore a backup and start fresh.
Haven't seen the market error before. I'm sure someone here has
Good Luck
If you got it off here, could you show me which stock you flashed..?
Everything you need is in the Epic 4G Touch Android Development section
Here is the post I used from Sfhub
http://forum.xda-developers.com/showthread.php?t=1433101
Watch the videos by Qbking77 They walk you thru everything step by step. (I hear his video intro rif every time I close my eyes now so you've been warned) Makes it super easy.
I would read everything you can and watch the videos before you get in too deep. I've had this phone since December, and just flashed my 1st ROM this week cause I've been reading up, and learning all I could before I jumped in the pool.
Well I've done all this with 2 phones before but I've never had this happen.. normally I just get the Rom and I'm good to go..
I think I must've gone wrong somewhere when I originally rooted through a stock rom.. It already seems to be more respondful.
premo1 said:
I think I must've gone wrong somewhere when I originally rooted through a stock rom.. It already seems to be more respondful.
Click to expand...
Click to collapse
Try booting while holding the volume up and power button.
If that does not work, flash recovery from rom manager, and that should get you into recovery to flash whatever kernel/recovery u want.
I've done all that.. None of it works.. I'm currently ODIN'ing Factory Stock Rom with root. Hopefully after that I can redo all of these and eventually end up with a working, corresponding Rom and kernel..
premo1 said:
I've done all that.. None of it works.. I'm currently ODIN'ing Factory Stock Rom with root. Hopefully after that I can redo all of these and eventually end up with a working, corresponding Rom and kernel..
Click to expand...
Click to collapse
Good Luck.
Recovery and market are now working Thank you Adanorm!
Glad your back up and running