Develop Bugs

Brand New Rooted Evo With AOSP Rom Now No 3G Help!!

Alright I just rooted my bros brand new evo right out of the box
for some reason when i install an AOSP Rom I keep getting a 1x connection no 3g.
if anybody could help that would be great
His has the 2.10 hboot
everything works on a sense rom but when i install a AOSP rom (CM or MIUI) no 3g
please get back to me asap

Toggle airplane mode. Does it come on and then switch to 1X? Make a nandroid backup and switch to a sense rom if you have a backup. Once in the sense rom update prl and profile.
Sent from my PC36100 using XDA App

im having the same problem on MIUI, 3g doesnt come on at all after toggling airplane mode, i even went to a sense rom and updated profile and prl. as well as completely reactivating the phone, the 3g just wont stay on, and ive yet to find a fix for it.

It is possible that you've never had 3G. On the stock rom, the EVO always shows the 3G icon even if you aren't connected to 3G.

Stuke00 said:
It is possible that you've never had 3G. On the stock rom, the EVO always shows the 3G icon even if you aren't connected to 3G.
Click to expand...
Click to collapse
+1. On sense ROMS, it always shows 3g, if the data connection is turned on. It is only capable of showing 3g, even if you aren't actually connected to it. In the newer AOSP ROMs, they have the capability to show what you are ACTUALLY connected to at the time, so the AOSP rom is showing you the truth, what you're actually connected to, while the Sense ROM is lying to you, showing that you're always connected to 3g, when in fact, you're not. Flash the sense ROM that shows you're on 3g. Run a speedtest a few times, see what your avg download and upload speed are. Flash over to the AOSP rom, and repeat the same test. I bet they are the same or extremely similar, even though one shows you're on 3g, and the other shows 1x.

No, what is happening is that the AOSP roms DO NOT have the kernel for the new hardware, this is why you are getting no 3g. Go back to the latest sense and wait.

sesgv13 said:
Alright I just rooted my bros brand new evo right out of the box
for some reason when i install an AOSP Rom I keep getting a 1x connection no 3g.
if anybody could help that would be great
His has the 2.10 hboot
everything works on a sense rom but when i install a AOSP rom (CM or MIUI) no 3g
please get back to me asap
Click to expand...
Click to collapse
Like the guys said above is because of sense only showing 3G which is really dumb, like at my house I get 4 out of 6 bars in sense and only 2 out 4 in aosp roms and still has the same speed and not problem with phone calls , go out and check if 3G ever comes on and make sure your are is cover by 3G coverage
Sent from my PC36100 using Tapatalk

im on older hardware and the 3g turns on, but when i switch to wifi or turn of the 3g the 3g wont turn back on. ive read all about how the 3g icon and all that is different than on a sense rom but im literally not getting any 3g connection.

I've been running CM7 since it was being compiled by lithid. At some point my 3G broke and I tried to ask for help but never could find a complete answer. At some point someone said the words "##data#" and "call sprint." Below is a step by step guide to what I did to fix 3G and it's been working through numerous wipe/flashes since. If someone already posted this information I apologize. This has worked for me and at least one other person that I know of, so hopefully it doesn't ruin anyone's phone.
1. Download MSL Reader from market, run it and write down results.
2. Nandroid current rom.
3. Flash cauklins format all
4. Flash latest rooted OTA (I found one in the wiki)
5. Boot OTA (I skipped all of the google login/set up stuff)
6. Enter ##3282# (##data#) in to the dialer.
7. Menu will popup select "Edit Mode"
8. Enter MSL when it asks for password.
9. Tap "Data Profiles"
10. Tap Menu button, then "Restore"
11. Phone will reboot in 10 seconds or you can click ok.
12. Hands free activation will come up shortly after phone reboots, then PRL update and Firmware update. (It found no frimware updates I think because I used the latest OTA) Let it process all.
13. Power phone off.
14. Boot to bootloader (hold power + vol down)
15. Select recovery.
16. Flash format all again.
17. Nand restore.
18. Enjoy working 3g.
I did all this the first time on the phone with sprint. As soon as I booted the OTA I had 3g again, I just told them it was broken and they gave me the steps. I just did it all again while typing this to verify that it works rather than try to rely on my memory of what i did.
Hope this helps. I also did the ##gpsclrx# while I had that sprint garbage installed.
If these are instructions to seriously break your phone, can someone who knows better than me please correct me. So far I've had no problems, other than fixed 3G

SgtUSMC method worked for me. Great stuff man, thanks!

No 3G or 4G - 1x only - No Nandroid Backup HELP!

So my friend rooted his Evo with Unrevoked. I verified s-off.
He copied a PC36IMG onto his SD which turns out was some 2.1 rooted stock ROM. After doing that his phone could not make/receive calls/text or connect to 1x/3G/4G. Basically an expensive phone that has no phone functions. Everything else works (WiFi included). He flashed http://link.geekfor.me/rootedromzip onto his phone from http://forum.androidcentral.com/htc...vo-install-clockwork-recovery.html#post165998.
When I looked at it, he still did not have a custom recovery so I flashed Amon RA PC36IMG. Full factory wiped data/cache/dvalik. Flashed Synergy RC1. Phone still could not make/receive calls and was getting Error 16 when trying to call. Called Sprint and they reprovisioned phone and fixed calls and texting. Noticed his phone is stuck on 1x and cannot connect to 3G when my phone next to his works fine. Did not test 4G yet since I have poor 4G coverage in my area. Cannot update his profile - just sits there like something is happening but it never completes.
What are his options here? Is it a bad radio or something that we can fix? Can we flash a stock rooted ROM and regain 3G? Remember, no nandroid was made unfortunately.

I would try flashing the latest radios just to be sure. And tell your friend to always make a nandroid backup to avoid this problem in the future.

Well his first time flashing. I think he mistakenly thought the PC36IMG as a custom recovery but it was actually an entire ROM.
Didn't have a chance to nandroid. I'm instructing him how to update newest radio combo and seeing what happens.
Update: Flashed latest combo radio. Updated profile and PRL. Still stuck on 1x even after reboot. Is he hosed? Does Sprint have to do something on their end to fix his EVDO? 4G isn't working either by the way.
Update 2: Wimax Keys Checker - https://market.android.com/details?id=com.joeykrim.wimaxkeys says that RSA Key is present. Relieved that he didn't lose his RSA key. Just can't figure for the life of me why he can't connect to 3G or 4G. Not sure where to go from here? Maybe trying to flashing latest stock rooted RUU? http://forum.xda-developers.com/showthread.php?t=1110733

Bumping for some attention.

Hey, happened to me a couple of times, it will come back. Maybe wipe everything again, have you tried ##data# and entering msl key, wait... Have you updated his data profile in settings
Sent from my PC36100 using XDA Premium App

Hello.....did that work for ya?
Sent from my PC36100 using XDA Premium App

Ok, was on the road when I had wife reply...lol.. When you rebooted the phone,did you wipe cache,and dalvik. Then try updating profile? It sounds weird,but has worked for me,without even updating profile. I have had no coverage before after flashing a Rom,also,did just that,and it came back. If rsa keys are present,that is good. If you would be kind enough to reply,whether fixed or not,would appreciate it,anyway,gonna move on...
Sent from my PC36100 using XDA Premium App

Cares said:
So my friend rooted his Evo with Unrevoked. I verified s-off.
What are his options here? Is it a bad radio or something that we can fix? Can we flash a stock rooted ROM and regain 3G? Remember, no nandroid was made unfortunately.
Click to expand...
Click to collapse
Did he try updating his profile & prl
Sent from my criffvo

Updating profile and PRL doesn't work. It keeps attempting to update but it is never successful.
I haven't had a chance to get his phone to just try reflashing a new ROM or stock ROM to see what will happen though.
He says using ##data# and entering his MSL code and changing EVDO to automatic doesn't work either.

Cares said:
Updating profile and PRL doesn't work. It keeps attempting to update but it is never successful.
I haven't had a chance to get his phone to just try reflashing a new ROM or stock ROM to see what will happen though.
He says using ##data# and entering his MSL code and changing EVDO to automatic doesn't work either.
Click to expand...
Click to collapse
I would start over again ... wipe completely with Calkulin's "fomat all" zip and flash a rooted stock rom like xhausx. Once the phone boots up, call Sprint and have them walk you through provisioning everything. Once all is well, then move into whatever custom stuff he wants.

wmdunn said:
I would start over again ... wipe completely with Calkulin's "fomat all" zip and flash a rooted stock rom like xhausx. Once the phone boots up, call Sprint and have them walk you through provisioning everything. Once all is well, then move into whatever custom stuff he wants.
Click to expand...
Click to collapse
You took the words from my mouth!
Is he Flashing the RUU's or just running them through the computer? Normally, you sync your phone or through hBoot and then start the program, try flashing stock Froyo and then factory reset once flashed, it helps clear out traces of old roms etc. If you need anymore help feel free to ask, I would be more than happy!

I don't think it worked.
Calkulin's Format, flashed Odexed http://forum.xda-developers.com/showthread.php?t=1133379.
It showed 3G but I think it was misleading. Wiped and flashed to evodeck and it went back to showing 1x. My phone has 3G showing on evodeck next to his so he definitely has 3G coverage.
I guess it's just time to call Sprint for a re-provision? Does it have to be on a Sense ROM for them to reprovision?

Cares said:
I don't think it worked.
Calkulin's Format, flashed Odexed http://forum.xda-developers.com/showthread.php?t=1133379.
It showed 3G but I think it was misleading. Wiped and flashed to evodeck and it went back to showing 1x. My phone has 3G showing on evodeck next to his so he definitely has 3G coverage.
I guess it's just time to call Sprint for a re-provision? Does it have to be on a Sense ROM for them to reprovision?
Click to expand...
Click to collapse
you dont need Sprint to provision, just get your MSL code and do it your self plus I would do a search for people who may of had similar issues and see what they did. Now if that does not work then why dont you check what your network settings are.. See if its set to CDMA(Auto) I remember my Touch Pro I could of set it to 1x maybe something is getting stuck. I think its in ##3282 you check it and I also remember an app on the market called network that did it for you as well.
If that does not work then flash 3.70 radios and then a 3.70RUU and start from scratch.

He already tried ##data#. He can change his EVDO to automatic but it doesn't stay that way.

Alright I don't know how I fixed it but it's fixed.
Just cannot get 4G now. Wimax keys are present. It keeps scanning and cannot get connect. Previously could get 4G at these locations.

I am running EVO as donor/target phone, my is only 1x speed, no matter which rom I try
Synergery, Mik, Stock-Rooted, differ kernal, different PRL, check the data profile Automatic, Try restore but can not cat automatically update, still need to go qpst to update my profile. I have been working on this for two weeks. I went back to my orig phone, it show ev most of time, the speed is must faster than my evo. Searc all over from goole, still no luck, Anyone any idea to try

sitlet said:
I would try flashing the latest radios just to be sure. And tell your friend to always make a nandroid backup to avoid this problem in the future.
Click to expand...
Click to collapse
+1
i know this post is somewhat old. but Making a back up wont take hardly and extra time! always always make one unless you have 100% reliable roms already backed up.

[Q] [SOLVED] Stuck on 1x

Hey, I'm running cm7 and I've been stuck on 1x for only god knows how long. I know there is 3g around because when I first got the phone it worked. After flashing different roms it seems to not want to connect to 3g anymore at all. Why is this?
Sent from my PC36100 using Tapatalk

call sprint and see if there is an outage

Are you somehow stuck on roam only?
You might need to reset your phone through obtaining your MSL code. I flashed my friend's phone incorrectly in the past before lost his 3G.

Cares said:
Are you somehow stuck on roam only?
You might need to reset your phone through obtaining your MSL code. I flashed my friend's phone incorrectly in the past before lost his 3G.
Click to expand...
Click to collapse
I think this may be my problem. I do roam sometimes when I never had before. What should I do in order to fix this?

I am pretty sure there isn't an outage because my friend on sprint has been tooling around on 3g.
I'm able to toggle between the 1x and 4g, but I can't connect to 3g. :-/
Sent from my PC36100 using Tapatalk

Bump.
I'm still having the same issue. Can anybody guide me through getting back to 3G? Would be much appreciated.
Sent from my PC36100 using Tapatalk

+1 .

If I just switched to the stock kernel and then back to the savaged zen one I'm using now, could this fix my error? Just a thought.

Seandeezy said:
If I just switched to the stock kernel and then back to the savaged zen one I'm using now, could this fix my error? Just a thought.
Click to expand...
Click to collapse
I had this exact sh_t happen to me after a flight from Portland to Boston. What I had to do was flash Sense, wipe, then re-flash CM7 (I think it was Deck's ROM).
See if that helps

swagstr said:
I had this exact sh_t happen to me after a flight from Portland to Boston. What I had to do was flash Sense, wipe, then re-flash CM7 (I think it was Deck's ROM).
See if that helps
Click to expand...
Click to collapse
Stock kernel as well?
Sent from my PC36100 using Tapatalk

Seandeezy said:
Stock kernel as well?
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
Eh.. I mighta been usin' Tiamat (this was like 4 mos ago).

This really works!
I had the same exact problem and this worked for me. I found it on goodandevo.net
After following these directions I upgraded to the latest prl and maintain 3g.
'Turn off your GPS. Dial ##3282#, and select Edit. Enter your MSL, then go to Data Profile. Push the menu button, then tap on Restore. Push OK to reboot. Allow the phone to go through hands-free activation, but WATCH YOUR PHONE CAREFULLY AND PRESS CANCEL WHEN IT BEGINS TO UPDATE PRL.'
Found this in the comments here: http://www.goodandevo.net/2011/09/stuck-at-1xrtt-on-your-htc-evo-3d-heres-how-to-get-3g-back.html
Obviously, first you will have to flash a ROM that has working EPST, after restoring 3g, it should hold thru all following flashes.

I have this problem occur on CM7 randomly as well. I just turn off mobile data for about 5 mins then turn it back on and it seems to fix the problem. Least till the next time.

mchristian said:
I had the same exact problem and this worked for me. I found it on goodandevo.net
After following these directions I upgraded to the latest prl and maintain 3g.
'Turn off your GPS. Dial ##3282#, and select Edit. Enter your MSL, then go to Data Profile. Push the menu button, then tap on Restore. Push OK to reboot. Allow the phone to go through hands-free activation, but WATCH YOUR PHONE CAREFULLY AND PRESS CANCEL WHEN IT BEGINS TO UPDATE PRL.'
Found this in the comments here: http://www.goodandevo.net/2011/09/stuck-at-1xrtt-on-your-htc-evo-3d-heres-how-to-get-3g-back.html
Obviously, first you will have to flash a ROM that has working EPST, after restoring 3g, it should hold thru all following flashes.
Click to expand...
Click to collapse
I've followed your instructions and I read up on that website. I've dragged the two files on to my SDcard and placed the one it told me to in system/app. Rebooted my phone and tried to type in ##3282# and nothing happens. It just dials the number. There isn't an option for me to press edit and type in a MSL code. I press menu and there isn't even an option similar to that. I read up that it's probably due to me using a third party dialer. I am using cm7, so is there a way for me to just show the stock dialer for a second to do this and then go back to the dialer that is set for cm7?

Seandeezy said:
I've followed your instructions and I read up on that website. I've dragged the two files on to my SDcard and placed the one it told me to in system/app. Rebooted my phone and tried to type in ##3282# and nothing happens. It just dials the number. There isn't an option for me to press edit and type in a MSL code. I press menu and there isn't even an option similar to that. I read up that it's probably due to me using a third party dialer. I am using cm7, so is there a way for me to just show the stock dialer for a second to do this and then go back to the dialer that is set for cm7?
Click to expand...
Click to collapse
I think the simpliest thing to do would be to flash a stock rom and make your changes and then flash back to your prefered rom. Thats what I did. Flash the stock rom, use EPST and then flash back to CM7. You should have working 3g.

mchristian said:
I think the simpliest thing to do would be to flash a stock rom and make your changes and then flash back to your prefered rom. Thats what I did. Flash the stock rom, use EPST and then flash back to CM7. You should have working 3g.
Click to expand...
Click to collapse
Thanks man! I have obtained 3g and it held through the flash of cm7. For all others who have this problem, just do as his said. The rom I used to flash to properly obtain the correct PRL is located here. So glad I have my 3g back, that 1x speed **** was pissing me off.

Seandeezy said:
Thanks man! I have obtained 3g and it held through the flash of cm7. For all others who have this problem, just do as his said. The rom I used to flash to properly obtain the correct PRL is located here. So glad I have my 3g back, that 1x speed **** was pissing me off.
Click to expand...
Click to collapse
Yeah, I was pulling my hair out too. Happy it worked for you.

3G/H/H+

Ok so I have a Telus model and this started a few days ago when I flashed an AOKP rom...
So, I don't get LTE in my area and have always had 4G (or whatever they say it is).. Ive flashed many TW roms and ALL the roms have displayed 4g...and for not having lte, ive been very impressed with the speeds.
However, since this AOKP rom I installed (which was awesome, just wanted to go back to TW), it displayed H+...
Now, I know what h/h+ is and all that jazz about the carriers.. My issue is, can't flash any TW rom now without getting 3g/h/h+ toggling back and forth nonstop and the speeds are horrible!!! Can barely download in the store and loading a page takes a while.....and yes, I realize that its supposed to help with battery and whatnot but I don't like it and just want 4G back!!! lol
So far, I can only get 4g back when I unroot and do a hard factory reset...
And even then, it still shows h/H+ until I go through all the system updates.... then, I go to install another TW rom and I'm back with the h/h+ again...
I have tried the att fix, installing latest modem and still no luck.
I even asked to do a factory reset on my fathers phone (we are on the same family plan) and his shows 4g even when installing any TW rom...
Does anyone out there know what I did wrong?? also, my imei number is fine..
Thanks in advance to any advice or help

spenny88 said:
Ok so I have a Telus model and this started a few days ago when I flashed an AOKP rom...
So, I don't get LTE in my area and have always had 4G (or whatever they say it is).. Ive flashed many TW roms and ALL the roms have displayed 4g...and for not having lte, ive been very impressed with the speeds.
However, since this AOKP rom I installed (which was awesome, just wanted to go back to TW), it displayed H+...
Now, I know what h/h+ is and all that jazz about the carriers.. My issue is, can't flash any TW rom now without getting 3g/h/h+ toggling back and forth nonstop and the speeds are horrible!!! Can barely download in the store and loading a page takes a while.....and yes, I realize that its supposed to help with battery and whatnot but I don't like it and just want 4G back!!! lol
So far, I can only get 4g back when I unroot and do a hard factory reset...
And even then, it still shows h/H+ until I go through all the system updates.... then, I go to install another TW rom and I'm back with the h/h+ again...
I have tried the att fix, installing latest modem and still no luck.
I even asked to do a factory reset on my fathers phone (we are on the same family plan) and his shows 4g even when installing any TW rom...
Does anyone out there know what I did wrong?? also, my imei number is fine..
Thanks in advance to any advice or help
Click to expand...
Click to collapse
Verified the APN settings, and the Network Mode is LTE / GSM / WCDMA?

Craptain Krunch said:
Verified the APN settings, and the Network Mode is LTE / GSM / WCDMA?
Click to expand...
Click to collapse
Yes apn checks out just and on LTE/GSM/WCDMA.
Its weird becase my father has the exact same settings. And again, showing his 4g.
As I type this, im on 3g and when I send, it will turn to h+. Speed is horrible

spenny88 said:
Yes apn checks out just and on LTE/GSM/WCDMA.
Its weird becase my father has the exact same settings. And again, showing his 4g.
As I type this, im on 3g and when I send, it will turn to h+. Speed is horrible
Click to expand...
Click to collapse
So it constantly switches between 3g, H, and H+ ? Have you downloaded a network signal app to see what kind of signal you are getting and strong it really is ?
When you say you have done a complete unroot and factory reset, what method are you using ? Is this where to flash an unrooted stock firmware from lets say Sam Mobile and then done a factory reset ? Or are you just doing another type of unroot ? When you root what method are you using ?
You stated you are on a Telus model but flashed an at&t modem ? Are you on AT&T service ?

hednik said:
So it constantly switches between 3g, H, and H+ ? Have you downloaded a network signal app to see what kind of signal you are getting and strong it really is ?
When you say you have done a complete unroot and factory reset, what method are you using ? Is this where to flash an unrooted stock firmware from lets say Sam Mobile and then done a factory reset ? Or are you just doing another type of unroot ? When you root what method are you using ?
You stated you are on a Telus model but flashed an at&t modem ? Are you on AT&T service ?
Click to expand...
Click to collapse
Getting 5753kbps download and 905kbps upload .
Whereas before my kbps were always around 11-12000kbps for the download speeds.
I always flash back to stock rom using odin and then factory reset.
Oh sorry if I stated that wrong. I tried an att fix as well as flashing the most recent modem for my telus device but both fixes did nothing.
Again tho, ive done this so many times with TW roms and cant figure it out..
Im currently trying to go back to stock and use the most recent CWM to flash and see if that helps

spenny88 said:
Getting 5753kbps download and 905kbps upload .
Whereas before my kbps were always around 11-12000kbps for the download speeds.
I always flash back to stock rom using odin and then factory reset.
Oh sorry if I stated that wrong. I tried an att fix as well as flashing the most recent modem for my telus device but both fixes did nothing.
Again tho, ive done this so many times with TW roms and cant figure it out..
Im currently trying to go back to stock and use the most recent CWM to flash and see if that helps
Click to expand...
Click to collapse
It doesn't seem to make sense that even after going back to stock unrooted 4.0.4 (or what ever it cmae with from the factory) you still have signal problems as the odin packages would flash the correct modem once you install.

Sounds like network issues.

Speeds of ~9000kb are actually pretty standard for actual usage with H+/H/3G. Don't worry about speed too much. And for future reference 4G is H+, its just another name for it. The common misconception is that 4G is LTE which it is not.

aeppacher said:
Speeds of ~9000kb are actually pretty standard for actual usage with H+/H/3G. Don't worry about speed too much. And for future reference 4G is H+, its just another name for it. The common misconception is that 4G is LTE which it is not.
Click to expand...
Click to collapse
Thank you for your reply.. yes I know what it means and its pretty cool. But again, my father and I are on the same plan, with telus with same phones. Going back to stock rom with odin still shows h/h+ when it should show 4g. I kniw they are the same, but the fast dormacy is a pain in the rear. My father and I are currently running the same rom with the same service getting 4g on his and h/h+ on mine

hednik said:
It doesn't seem to make sense that even after going back to stock unrooted 4.0.4 (or what ever it cmae with from the factory) you still have signal problems as the odin packages would flash the correct modem once you install.
Click to expand...
Click to collapse
No kidding!! Ive done this a thousand times and have never seen it before..so starting to grt frustrated when told that its normal lol..
So when I get to 4.0.4 its still h/h+, but when I update the first time from samsung, it then shows 4g and my speeds are back to normal. But then as soon as I flash afyer rooting, it gies right back to h/h+ fast dormacy with no way of going back unless i do a hard factory reset again.

spenny88 said:
Thank you for your reply.. yes I know what it means and its pretty cool. But again, my father and I are on the same plan, with telus with same phones. Going back to stock rom with odin still shows h/h+ when it should show 4g. I kniw they are the same, but the fast dormacy is a pain in the rear. My father and I are currently running the same rom with the same service getting 4g on his and h/h+ on mine
Click to expand...
Click to collapse
Are you sure it is the exact same version that you are running? He didn't update at all, no matter how small the update? If you flash from odin, everything that you did in the past should be overwritten. Go to settings->about phone and tell me what both of your baseband/build versions are

aeppacher said:
Are you sure it is the exact same version that you are running? He didn't update at all, no matter how small the update? If you flash from odin, everything that you did in the past should be overwritten. Go to settings->about phone and tell me what both of your baseband/build versions are
Click to expand...
Click to collapse
Ok so the baseband is I747MVLDLK4 and build version is 2.4? lol
I will unroot and flash back to 4.0.4 with a factory reset and then update this post.
Really appreciate ur help
Btw.. I downloaded the whole odin/telus stock tar md5 and recovery about a year ago and have been using that for both of our phones. I will update in a coupke of hours
Also, when I flash back to stock and get the 4g back is there a way to save the modem and/or other files needed to bring over to another rom?
Ok so here is the image I took of my phone info..
I would have to put my fathers back to stock to see if there are the same... but Im now on 4.0.4 with h/h+ still present. Im gonna do a hard factory reset to get the 4G back and then see about trying other things.

spenny88 said:
Ok so the baseband is I747MVLDLK4 and build version is 2.4? lol
I will unroot and flash back to 4.0.4 with a factory reset and then update this post.
Really appreciate ur help
Btw.. I downloaded the whole odin/telus stock tar md5 and recovery about a year ago and have been using that for both of our phones. I will update in a coupke of hours
Also, when I flash back to stock and get the 4g back is there a way to save the modem and/or other files needed to bring over to another rom?
Click to expand...
Click to collapse
TW ROMs display H+ as 4g, and LTE as 4g LTE
AOSP ROMS display H+ as H+ and LTE as 4g

Craptain Krunch said:
TW ROMs display H+ as 4g, and LTE as 4g LTE
AOSP ROMS display H+ as H+ and LTE as 4g
Click to expand...
Click to collapse
Yes, this I understand... but with the 4G displaying, I get NO fast dormancy causing download issues and on top of that, my download speeds are 11-12000kbps.. when showing h/h+, Im getting half the speeds and constant toggling from 3g/h/h+ is driving me up the wall!!
again, Ive never seen this on my Telus TW roms..
I will be unrooting and going back to stock with odin...then doing a factory reset..it will still show the h/h+ unless I do 1 of 2 things....either do a hard factory reset using *2767*3855#, or by simply doing a Samsung update...then after one of those, 4G will be back and so will my speeds.

spenny88 said:
Yes, this I understand... but with the 4G displaying, I get NO fast dormancy causing download issues and on top of that, my download speeds are 11-12000kbps.. when showing h/h+, Im getting half the speeds and constant toggling from 3g/h/h+ is driving me up the wall!!
again, Ive never seen this on my Telus TW roms..
I will be unrooting and going back to stock with odin...then doing a factory reset..it will still show the h/h+ unless I do 1 of 2 things....either do a hard factory reset using *2767*3855#, or by simply doing a Samsung update...then after one of those, 4G will be back and so will my speeds.
Click to expand...
Click to collapse
general rule of thumb, touchwiz roms cannot be built from source. The only way to mess with these roms is with winzipping and adding apps (i call it bloatware) to be honest, if you want customization go to AOSP. Every single time I use a touchwiz rom no matter how smooth its says it is, I get crashes, bugs, irreversible issues like you have, loss of connectivity, the list goes on. Thats all because of the limitations of not having source code, I would recommend you drop the touchjizz and find an AOSP rom you like, if not, stock rom is the way to go.

aeppacher said:
general rule of thumb, touchwiz roms cannot be built from source. The only way to mess with these roms is with winzipping and adding apps (i call it bloatware) to be honest, if you want customization go to AOSP. Every single time I use a touchwiz rom no matter how smooth its says it is, I get crashes, bugs, irreversible issues like you have, loss of connectivity, the list goes on. Thats all because of the limitations of not having source code, I would recommend you drop the touchjizz and find an AOSP rom you like, if not, stock rom is the way to go.
Click to expand...
Click to collapse
Its cool to prefer something but spouting BS doesn't really make your case convincing.
Sent from my SAMSUNG-SGH-I747 using xda premium

hednik said:
Its cool to prefer something but spouting BS doesn't really make your case convincing.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
I agree.. I'm under the impression its the other way around.

Hey just curious.. I was reading about going back to stock and making a copy of the qcn??
Can anyone confirm that copying this and then injecting it after a flash would work?

hednik said:
Its cool to prefer something but spouting BS doesn't really make your case convincing.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
what did I say that is a spout of BS?

spenny88 said:
Hey just curious.. I was reading about going back to stock and making a copy of the qcn??
Can anyone confirm that copying this and then injecting it after a flash would work?
Click to expand...
Click to collapse
Unless your imei is lost I wouldn't mess with anything involving it unless you have to.
aeppacher said:
what did I say that is a spout of BS?
Click to expand...
Click to collapse
That your opinion is somehow fact. That somehow using a TW rom will just give you bugs and ruin your phone, as if a custom rom doesn't have glaring bugs as well. It's quite awesome the amount of customization that the dev's on the touchwiz rom's are able to inject into their rom's. Anyonr who thinks it's just unzipping files and adding apk's is uninformed. Is it on the level of PA or AOKP of course not but with more customization you add the possibility and almost the certainty that you have bugs and instability. We are quite spoiled on the i747 that we have kt and Task developing rock solid custom rom's. Most out there don't have that pleasure. If a TW rom on here is unstable it's because the dev has fallen short some where. I'd say I fall in this category and I am certainly no dev, just a noob cook. Equating TW rom's from 2.2 to the ones we have now is just fallacy. I do agree not having the source code put's dev's on the
In general I have had to deal with more bugs and instability with custom rom's than I have with a stock based rom (stock meaning what came on the phone). Yet that is not a gripe but merely the fact that I don't like to deal with the little things that pop up on custom rom's, and I prefer the aesthetics of TW. Crazy I know as many find it ugly.

[Q] Sprint Note 2 LTE Issue

Hello there, I have been in the search for a perfect 4.4 ROM to work, I seem to be at an impass..
The 2 that I have tried, and Quite enjoyed so far are the Omni ROM and the Cyanogenmod 11
Both roms have the same issue, I cannot connect to a 4g LTE Sprint tower. I know the LTE Towers are working, My mom has the same phone, Sprint Note 2 and I have Mac's Rom on it and is picking up a very strong 4g Signal, yet my phone which sits literly right next to it, Refuses to get any 4g.. I drove around, went to known working areas, Never once did I snatch a 4g signal.
I played with the settings, it is set to LTE mode, I even tried Flashing as a fresh Install..
I tried flashing a Stock rom, but for some reason after it installs, and on boot up the phone does not work. I get a blank screen and literly nothing. I have to pull the battery to get it to turn back on. At that point I have to either Re-flash or restore a backup through CWM.
Any help would be appreciated, I miss my LTE Thanks

Same issue here. Not sprint though...

In cm11 set your mobile network type to cdma+lte/evdo or global. See if that works.
Next you can try to flash a touch wiz rom and do a hands free activation, verify lte works on the touch wiz rom, then flash to CM11 and see if you can connect to lte.

DarkManX4lf said:
In cm11 set your mobile network type to cdma+lte/evdo or global. See if that works.
Next you can try to flash a touch wiz rom and do a hands free activation, verify lte works on the touch wiz rom, then flash to CM11 and see if you can connect to lte.
Click to expand...
Click to collapse
I have tried setting it to both. Global shows no signel what so ever on anything, I currently have it on cdma=lte/evdo and I just get a good 3g signal..
I might try that one out, Which is a good touch wiz rom to try and do that with ? I dont think I even tried a touch wiz rom yet

scorpnet said:
Hello there, I have been in the search for a perfect 4.4 ROM to work, I seem to be at an impass..
The 2 that I have tried, and Quite enjoyed so far are the Omni ROM and the Cyanogenmod 11
Both roms have the same issue, I cannot connect to a 4g LTE Sprint tower. I know the LTE Towers are working, My mom has the same phone, Sprint Note 2 and I have Mac's Rom on it and is picking up a very strong 4g Signal, yet my phone which sits literly right next to it, Refuses to get any 4g.. I drove around, went to known working areas, Never once did I snatch a 4g signal.
I played with the settings, it is set to LTE mode, I even tried Flashing as a fresh Install..
I tried flashing a Stock rom, but for some reason after it installs, and on boot up the phone does not work. I get a blank screen and literly nothing. I have to pull the battery to get it to turn back on. At that point I have to either Re-flash or restore a backup through CWM.
Any help would be appreciated, I miss my LTE Thanks
Click to expand...
Click to collapse
Personally I would recommend doing this:
Backup everything to your PC (both internal and external)
Delete the contents of the "0" folder on your internal card. If you use ES File Explorer, you'll need to enable root access, and then while in the app hit the menu button. The left menu will slide open and you'll see "Local".... underneath that you'll find the "0" folder. The problem is the way CM and Touchwiz mount the file system - they don't do it the same way. So when you do a factory reset in CWM, it doesn't clear out one of those folders. (I found this thread helpful - especially posts 2 & 4) I had major data problems on CM10 for 2-3 months, then I found this out.
After you do that go back to stock. Make sure you download the keep root file as well.
To play it safe, once stock, I highly recommend entering ##72786# in your dialer. The phone will grab the latest prl and update your profile. Whether or not you want to update the software (incl modem) is up to you, but I'd rather not get into the knox world.
Verify working gps. (I prefer "GPS Status")
Then go back to CM11.

I will try that out thanks
Sent from my SPH-L900 using XDA Premium 4 mobile app

scorpnet said:
I will try that out thanks
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Update us on your progress.
If it works, consider hitting the thanks button - at the very least the guy in that other thread - I know I thanked him - his info saved me from going crazy!!!
I had working data (3g/LTE) on any touchwiz, but not on CM. It turned out that I had some corrupted data that wasn't getting deleted upon a factory reset. After I cleared out that data, everything was fine.
Hope your phone is back to normal!

Finally was able to download everything and run the tip, Thanks a lot dude! That helped and that did it ! I got 4g Back and everything is all peachy!!! Thanks again!