TG 2.0 is probably my final Gingerbread build for Hero. I think it's pretty complete, stable enough for daily use and fast, much faster than 1.x.
Screenshots and more info in post #2
IMPORTANT NOTES:
1. Don't use any other OC app, please only use the included one.
2. On the first boot many internal tweaks that require a restart are set up, so please do so before setting up stuff, this is pretty critical.
3. Wipe absolutely everything, even if you come from TastyGinger 1.1.
Changelog:
- updated to latest sources
- fixed text rendering
- added power widget in notification bar AND their settings in settings/display
- much faster(as in snappiness, dunno about benchmarks &co)
- EXT-A2SD - moves apps and dalvik cache to SD works now, I've tested it again and again
- added LWP
... and other minor stuff too
Features:
- RaKern 200 kernel @614MHz default
- new CPU governor, MOBILE GOVERNOR, written from scratch, based on the ondemand governor's behavior, with some tweaks -> limited frequency when CPU is idle, optimized frequency stepping based on CPU load and others too *** at the moment the governor comes as a module, and I'm not going to release the source code until I make it a perfect option for mobile, battery-powered devices; I still have to test it on other types of CPUs to see what can be done to improve.
- default Gingerbread launcher, with a few tweaks to make it faster
- built-in low-DPI
- built-in overclocking app, very basic and straight forward, but with a very nice way of doing things(see post #2 for more info)
- no ads in browser and apps
- compatibility mode disabled by default
... and many others
DOWNLOAD TastyGinger 2.0 for HTC Hero(mdpi)
MD5: 3ad7c8523b75f371ae99b5fdbd05a376 (please check if your installation is not working according to changelog/feature list)
Alternative
Reserved for screenshots and more info
downloading...
Sent from my Hero using XDA App
Downloading now... Thanks
being a bit of a noob, but how does a2sd work? i know the option on recovery, what should swap be? i know aaaages ago i used 512mb for apps, so how do i do this??? lol
Swap is useless with this ROM.
is this right? swap is 0mb, change ext2 to ext3 and when the option on flashing, male ext2 as 512mb??? all done???
Leave it as EXT2. And yes, but do this BEFORE flashing the rom.
Games?
Does Homerunbattle 3d and Backbreaker work on this build? In other (1.1) doesn't work.
Do you think a 8GB Class 2 would be sufficient for Apps2SD?
Any SD Card will do the job
holyshit1 said:
Does Homerunbattle 3d and Backbreaker work on this build? In other (1.1) doesn't work.
Click to expand...
Click to collapse
Hey, Radug can you answer on my question?
I don't have the apps installed so I don't know
ETA on screenshots?
See the TG1.1 screenshots... the default wallpaper is different and that's about it... and yeah the text rndering is better.
I'll try to post them later today.
Nice rom! Any idea on how to add dictionaries to the stock keyboard?
RaduG is there any possibility to change screens to only 3?
Not with the default launcher.
Umm, any way to get "Friendstream" or something? Basically I want a widget, that shows latest messages on facebook/twitter and lets me respond to them
Mirrored version 2 on my server . here
Related
Hi this is not my rom i just took parts out and added parts im not a developer i just like playing with roms so dont thank me if its wonderful =) i will try my best to fix some stuff but atm i just added some sense stuff
Mod Edit: Link to rom has been removed as it is using Feeyos kernel which does not comply with the GNU GPL and has been a subject of great debate recently.
OP, please pm a mod about this.
EDGE Hero 1.2.1
What's in?:
Root.
Superuser.apk nicer (see screenshots).
Apps2SD.
Dalvik2Cache
Autokill.
Busybox.
Own theme.
Kernel overclock up 768 MHz, Higher values make the phone totally unstable.
CPU usage optimizations.
PNGs optimized to load faster and save space.
3D Gallery running like an angel.
Wifi working.
Linpack \u003d> 2.2-2.3 MFLOPS without OC, OC to 3.1 with 768. 5 MFLOPS with JIT.
Market ALL apps running.
Deodexada ROM
JIT Patch, The phone becomes unstable, use with caution - Nandra backup.
Livewallpapers with launchers - with Sense will not, you could modify a little Rosie.apk that appeared on the forums of Villain and allows the LWP, but it would be foolish because at the end stop working after some time.
New kernel # 40 of Feeyo, with 2 new CPU governors, conservative and userspace.
Friendstream, and HTC NewsReader Mail with 3 widgets - thanks to Team Villain.
Instructions:
Do you come from another ROM?
-Make three wipes of rigor (or 5 as you give).
-Flashing the ROM.
-Restart.
"Upgrading from an older version? *
-Wipe the Dalvik-cache.
-Falsheo
nice one looking forward to try this one.
asad510 said:
New kernel # 40 of Feeyo..
Click to expand...
Click to collapse
uh-oh. you're going to get Dr Kelly'd.
Hi people. This kernel aims to be fast, compatible, stable, and have good battery life. It makes our Galaxy S run the way it should.
This kernel is for the International Galaxy S (I9000) and Bell Mobility Vibrant (I9000M)
The SpeedMod kernel for the AT&T Captivate is available here: http://forum.xda-developers.com/showthread.php?t=893880
Note: Only lagfixes using EXT4 are robust. Other lagfixes run the risk of data loss on freezing, hard-reboots, or sudden power loss.
WARNING: Before you try any lagfix, make sure that you have enough free space on your Internal SD. You should have at least more free space than data+dbdata+cache combined.
Latest K13E (12-Apr) - Voodoo Sound v7. Lowmemorykiller fixes. Improved display sharpness using AMOLED processing mode in MDNIE. Support for voice calls through headphones. Check here for more info and downloads.
>>> Click here for the installation procedure using Odin.
>>> If you have questions, please read the FAQ: Frequently Asked Questions first!
>>> What is the SpeedMod kernel?
Latest features:
- Compiled using codesourcery 2010.09: Faster and more battery efficient
- The only properly working Tiny RCU implementation, thanks to Paul McKenney
- More efficient: Removed debug logging from kernel and Android
- Most updated version of my Enhanced Universal Lagfix fork with improved stability
- Full Android 2.2.1 ROM compatibility
This kernel has:
- Based on JPX Android 2.2.1 kernel source
- Works on all stock Froyo 2.2 and 2.2.1 ROMs and popular custom ROMs
- 340MB RAM
- Enhanced version of sztupy's Universal Lagfix
- Includes neldar's BackLightNotification 2.3 from https://github.com/project-voodoo/backlightnotification/tree/master/kernel_patches/
- Sharpness (AMOLED mode) & color fixes for the screen
- SpeedMod: Replaced kernel jhash2 with jhash3
- Includes my Startup Tweaks from http://forum.xda-developers.com/showthread.php?t=813309
- Adjusted kernel HZ value to improve smoothness
- Uses BFQ IO scheduler by default, from http://algo.ing.unimo.it/people/paolo/disk_sched/sources.php
- Updated ext4 code in kernel from http://www2.kernel.org/pub/linux/kernel/people/tytso/ext4-patches/
- Properly working Tiny RCU for better speed and efficiency from http://android.git.kernel.org/?p=ke...it;h=9b1d82fa1611706fa7ee1505f290160a18caf95d
- Patched lowmemorykiller for compatibility with Tiny RCU from http://android.git.kernel.org/?p=ke...ff;h=5545554aac04918ece318270d63cbfcb015577a9
- Optimized compiler flags: -mcpu=cortex-a8 -mfpu=neon -mfloat-abi=softfp
--------------------------------
FOR BEGINNERS:
This kernel is based on sztupy's Universal Lagfix: Lagfix and root options are accessible by booting into the Recovery Menu.
To get the best speed, it is recommended that you enable all Tweaks from the Recovery Menu. Tweaks are under SpeedMod features. Info on Tweaks: http://forum.xda-developers.com/showthread.php?t=813309
How to root: http://forum.xda-developers.com/showpost.php?p=8896862&postcount=90
Kernel HZ value: HZ=500 is smoother, HZ=256 is Samsung default.
--------------------------------
Memory configs (K10J and later):
CONFIG_ANDROID_PMEM_MEMSIZE_PMEM=2048
CONFIG_ANDROID_PMEM_MEMSIZE_PMEM_GPU1=4096
CONFIG_ANDROID_PMEM_MEMSIZE_PMEM_ADSP=1500
CONFIG_WLAN_SAMSUNG_MEMSIZE_BCM=256
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC0=12288
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC1=1024
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC2=12288
CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC0=32768
CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC1=32768
CONFIG_VIDEO_SAMSUNG_MEMSIZE_TEXSTREAM=10240
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMD=3072
Memory configs (K10I and earlier):
CONFIG_ANDROID_PMEM_MEMSIZE_PMEM=4096 *#
CONFIG_ANDROID_PMEM_MEMSIZE_PMEM_GPU1=8192 *#
CONFIG_ANDROID_PMEM_MEMSIZE_PMEM_ADSP=1500
CONFIG_WLAN_SAMSUNG_MEMSIZE_BCM=256
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC0=11264 **
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC1=1024
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMC2=11264 **
CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC0=30720 ##
CONFIG_VIDEO_SAMSUNG_MEMSIZE_MFC1=30720 ##
CONFIG_VIDEO_SAMSUNG_MEMSIZE_JPEG=1024 *#
CONFIG_VIDEO_SAMSUNG_MEMSIZE_TEXSTREAM=6144 ^^
CONFIG_VIDEO_SAMSUNG_MEMSIZE_FIMD=3072
** FIMC0/2 = Below this and 720P video recording won't work
## MFC0/1 = Below this and 720P video playback won't work
*# PMEM/PMEM_GPU1/JPEG = Taken from default values for Galaxy Tab
^^ TEXTREAM = Too low and 3G video call stops working
THANKS: Big thanks to sztupy for his kernel compiler VM and ULFK, lastufo for testing compiler optimizations, ykk_five for testing memory configs, and others who gave ideas or helped.
--------------------------------
WARNING: If you use a custom boot animation, apps like One Click Lag Fix will not work because it disables the playlogos1 script hack.
The files with ending with -CWM are for flashing using Clockwork Recovery.
These other zip files are for flashing with ODIN.
--------------------------------
About USB Mounts:
>>> Click here to download the USB mount fixes. Latest SpeedMod versions do not need this fix. The fix is for using K12E or older with 2.2 ROMs. It fixes the problem where Internal SD mounts as a read-only drive on the PC, or if the External SD does not get mounted.
>>> If you have questions, please read the FAQ: Frequently Asked Questions first!
>>> CLICK HERE to DOWNLOAD the kernels.
Thank you! very useful..
Sounds good!
Could it be used in conjunction with Doc's ROM?
Implementing this in my next "Darky's Raw Steel Edition v3.1"
Cant wait. How about version A3 - O3, standart HZ (or 200, which ever you think is better) and OC (sources are already out)?
For now this is the ultimate kernel, without a doubt.
Btw, tried out HZ 100 quite extensively last night (plus ext4-ext2 and all tweaks). It is indeed not as smooth (with 6 pages of widgets in launcherpro, maximum memory consumption with 100 HZ - when you go to screen previews first drawing is slightly laggy. Without 100 - it is smooth on first attempt).
Battery life.. Well, subjectively - better, I would even say much better. But it needs more testing.
Startup script speed tweaks
# Tweak cfq io scheduler
Tweaked settings of the disk io scheduler more for flash memory. Defaults are optimized for spinning harddisks. Lowered the idle wait, re-enable the low latency mode of cfq, removed the penalty for back-seeks and explicitly tell the kernel the storage is not a spinning disk.
# Tweak kernel VM management
Set tendency of kernel to swap to minimum, since we don't use swap anyway.
Lower the amount of unwritten write cache to reduce lags when a huge write is required.
Increase tendency of kernel to keep block-cache to help with slower RFS filesystem.
Increase minimum free memory, in theory this should make the kernel less likely to suddenly run out of memory.
# Tweak kernel scheduler
Make the task scheduler more 'fair' when multiple tasks are running. This has a huge effect on UI and App responsiveness. These values (less aggressive settings) are 20% of the Linux defaults, and about half of the Android defaults.
# Miscellaneous tweaks
Manually set the starting dalvik heap size.
Increase wifi scanning gap to reduce battery usage.
@ Hardcore can you paste your Startup Reference, on your post too for a quick Faq for ppl here, looking for details on the tweaks.
Thanks
Ferdimage said:
Startup script speed tweaks
# Tweak cfq io scheduler
Tweaked settings of the disk io scheduler more for flash memory. Defaults are optimized for spinning harddisks. Lowered the idle wait, re-enable the low latency mode of cfq, removed the penalty for back-seeks and explicitly tell the kernel the storage is not a spinning disk.
# Tweak kernel VM management
Set tendency of kernel to swap to minimum, since we don't use swap anyway.
Lower the amount of unwritten write cache to reduce lags when a huge write is required.
Increase tendency of kernel to keep block-cache to help with slower RFS filesystem.
Increase minimum free memory, in theory this should make the kernel less likely to suddenly run out of memory.
# Tweak kernel scheduler
Make the task scheduler more 'fair' when multiple tasks are running. This has a huge effect on UI and App responsiveness. These values (less aggressive settings) are 20% of the Linux defaults, and about half of the Android defaults.
# Miscellaneous tweaks
Manually set the starting dalvik heap size.
Increase wifi scanning gap to reduce battery usage.
@ Hardcore can you paster this Ref on your post too for a quick Faq for ppl here, looking for details.
Thanks
Credit: Extralife (for pasting on another thread)
Click to expand...
Click to collapse
Thanks mate, very informative.
Ferdimage said:
Credit: Extralife (for pasting on another thread)
Click to expand...
Click to collapse
These tweaks are actually by hardcore, and his explanation =))
Any chance of incorporating the 1.2Ghz overclock?
Very interested in A1 gonna try it out when im home. I preffer speed over battery ^^
You actually changed any code in the source. Or just in config and compile flags? Want to compile kernel (voodoo sources) with this.
Sent from my GT-I9000 using XDA App
dereknas said:
Any chance of incorporating the 1.2Ghz overclock?
Click to expand...
Click to collapse
+1
Hope you could compile with the latest alpha OC using http://forum.xda-developers.com/showthread.php?t=822027
EDIT: Seems raspdeep already has this on his OC kernel, trying
Will this work on stock JP6?
_Rayearth said:
Will this work on stock JP6?
Click to expand...
Click to collapse
yes
10 char
dupel said:
yes
10 char
Click to expand...
Click to collapse
Kewl!
Looking forward to it
mms will fc when I receive or send mms. I think it has to do with the jpg memory size?
zenkinz said:
mms will fc when I receive or send mms. I think it has to do with the jpg memory size?
Click to expand...
Click to collapse
Thanks for the feedback. I'll test it. UPDATE: Just tested sending MMS with Image. It works for me.
BTW, files uploaded!
Can you post some details about jhash3? What's the gain?
First Impression with O2 and HZ=500. It is just me or it is waaay much smoooother the user interface? The scrolling and even opening applications experience feels closer my old HTC Desire.
Let's see battery life, but something changed with this latest kernel (Have been using your ones from the other thread).
Hi! Who can explain to me what is the difference miz these compilations nucleus.
Phone now works flawlessly. It should change or not???
http://forum.xda-developers.com/showthread.php?t=811660
I have been sharing my CM7/CM9 builds for some time in several thread, which culminated in the MackayROM. I picked up with jellybean where I stopped with ICS. MackayROM is based on CyanogenMod sources, with several performance enhancements.
About Cyanogen: CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (JellyBean), which is designed to increase performance and reliability over stock Android for your device.
Disclaimer: I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
If you run into errors, I may not be able to solve it!
If you know a solution to a problem, either upload it yourself to Gerrit Code Review or contact me through pm.
The ROM is based on CM10 with the following changes:
-Mackay Kernel: http://forum.xda-developers.com/showthread.php?t=1842324
-Set of cherries picked from gerrit (differing by the day)
-Some handmade patches I did myself to the source code
Feature request are OK, but remember:
1. I try to stay close to stock
2. I will not include additional apps, unless they can be build from source
3. The time I spend on features depends on how much I like them myself
Changelog of 1.9.0 compared 1.8.5:
CM10 sources of 16-Feb-2013
Kernel:
-Updated to linux kernel 3.0.64
-Ported all new features of the JB4.2 kernel (improvements to ROW (default) & BFQ + Interactive (default), added 1100/1300MHz steps)
Full changelog of 1.9.0 compared to stock CM10:
CM10 sources of 16-Feb-2013
Mackay kernel 0.190: http://forum.xda-developers.com/showthread.php?t=1842324
-updated to linux kernel version 3.0.64
-396MB RAM
-SIO scheduler
-Deadline tuning (thanks to DerTeufel)
-BFQv5 scheduler (with upstream improvements)
-ROW scheduler (tweaked, default scheduler)
-many improvements to IO schedulers in general
-SmartassV2 governor
-Wheatley governor
-Conservative tuned
-Interactive governor (default - updated to android 3.4 code + fixes)
-Call volume hack (using “Settings>Advanced Settings”* to set volumes)
-Reduced battery polling interval
-Fast charge (activate through “Settings>Advanced Settings”* or the QuickCharge toggle in MackayROM)
-WiFi PM_FAST mode selection (activate using “Settings>Advanced Settings”*)
-Battery life extender (set through “Settings>Advanced Settings”*)
-CustomVoltage (set using NSTools)
-1100-1400MHz OC steps
-Custom kernel splash (Thanks to Malcho)
-Updated charging logo to match open charger
-Disabled swap & zram
-Improve memcopy/memmove
-Improve the performance of memcpy and memmove
-Kill task closest in size to memory needed to free
-LOAD_FREQ (4*HZ+61) avoids loadavg Moire
-Entropy tweaks: http://lwn.net/Articles/489734/
-backport CPUIDLE from 3.5
-arm/crypto: Add optimized AES and SHA1 routines
ROM comes with stock colour & stock LED. Version with voodoo colour, BLN, and VC+BLN can be downloaded from:
http://rootaxbox.no-ip.org/kasper_h/kernels/JB/
*“Settings>Advanced Settings” only available with Mackay ROM 1.8.5+
*also available through the Galaxy S & Mackay app in the launcher
AriesParts (App name “Galaxy S & Mackay) – now also shown in launcher:
Add mackay kernel settings options:
>WiFi PM mode selection
>Fast Charge
>BLX settings
>Processor settings (governor/frequencies)
>IO scheduler
bootable/recovery:
Mackay recovery (based on CWM 6.0.2.7)
Clear NSTools settings
Clear init.d settings
Remove wipe battery function
Add reboot menu
fix default backup format selection menu
Show battery status in recovery
Aroma FileManager
Include using soft keys to navigate the menu (thanks fishears for the idea)
Added apps:
-Gapps (121011)
-AngryGPS
-YouTube HD (wifi, 3G, also with screen off, normal colour scheme)
-Asus email widget
vendor/cm:
Adapt for custom MackayROM building (bootanimation, ROM&file name)
Custom bootanimation (Thanks to Malcho)
device/samsung/aries-common:
Sets app-close to 1000 ms
Set default to ondemand governor
external/wpa_supplicant_8:
Save frequency to network config
hardware/samsung:
F4k 720p patch for bigmem kernels
frameworks/base:
Cid icon when USB connected
Changed USB page icon from beandroid to USB logo
Option to enable gfx effects
Right/center clock
Monitor device storage directly in /data/data
Navigation bar
Add an "Automatically Connect" option for WiFi networks
Allow purging of assets
Add option to enable/disable Electron Beam Animation
frameworks/native:
surfacetexture: Select texture target based on pixel format
Calculator:
Calculator feature degrees/radians in SIN/COS/TAN
DeskClock:
DeskClock: Fix the build
DSPManager:
Move DSP Manager into settings
Email:
download ZIP (and many other filetypes) files attached to emails
Exchange:
Exchange: calendar sync window linked to email sync window
Settings:
Option to enable gfx effects
Change Profiles to use the default header
Move DSP Manager into settings
Right/center clock
Removed user stats
Navigation bar
Change behavior when back pressed in PerformanceSettings
Fix issue with Portuguese translations
Add an "Automatically Connect" option for WiFi networks
Add option to enable/disable Electron Beam Animation
Trebuchet:
Add 2 Hotseat preferences
providers/MediaProvider:
Make sure to always release the wake lock
Coming from stock Samsung ROM/CM7:
-The safest way is to flash CM9 first and then flash Mackay ROM. Going directly from Samsung ROM/CM7 to Mackay ROM may lead to loosing IMEI.
Can be flashed on top of any CM9/CM10 build:
-Coming from CM9 or CM10-builds with an old/different partition layout (older than 0817, helly bean): your phone will be wiped (except SD card)
-Coming from a recent CM10 build (0817 or later): this is a non-wipe update
>Gapps is included in the zip since 1.2.0, so separate flashing of gapps is not needed!
-Custom kernels can be used only if patched for the new partition layout
Credits:
-teamhacksung/pawitp for making CyanogenMod work on our ancient phone
-stratosk/DerTeufel/Mialwe for the inspiration I got from their kernels
-theos0o for creating such a nice YouTube HD app
-rootax &xdafileserver for providing a high-speed server for high quality downloads
-Malcho for his bootanimation & kernel splash
Downloads:
https://s.basketbuild.com/devs/kasperhettinga/sgs/rom/pre-KK/
Eh, Eh, Eh. Another JB ROm! Nice! Thank you .
thanks a lot
Thanks friend :good:
What a fast update?!
Gesendet von meinem GT-I9000 mit Tapatalk 2
UltrasFrankfurt said:
What a fast update?!
Gesendet von meinem GT-I9000 mit Tapatalk 2
Click to expand...
Click to collapse
No no, it`s first version of ROM (not kernel)
Moin, mein Freund ...noch unterwegs so spät?
@kasper_h: very cool to see you finally made it to jellybean-country with your rom and kernel! i always liked the idea of your work and will now gladly test the jellybean-builds you produce.
thx again and keep up your good work!
greetz,
sUsH
tried most of the jb's on here and was looking for a change. Downloaded and flashed. So far so good. Feels snappy, my tomb runner is smooth. no FCs yet. quite impressed so far.
Sent from my GT-I9000 using xda premium
Can i used this rom for a daily use ?
Also how can i put low vibration
Haw sh*t,dropbox fact : generating too much traffic...
I got a wifi issue. It will stop downloading after a few seconds. Wifi indicator still shows full bars just dies. 3g working ok i think...
Sent from my GT-I9000 using xda premium
Bejda said:
Haw sh*t,dropbox fact : generating too much traffic...
Click to expand...
Click to collapse
yep, seems like there's some serious downloading going on...
maybe kasper_h or somebody else can do a mirror?
greetz n thx,
sUsH
RuffBuster said:
I got a wifi issue. It will stop downloading after a few seconds. Wifi indicator still shows full bars just dies. 3g working ok i think...
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
I have no idea what the problem can be, new problem to me. Can you provide a logcat?
sUsH667 said:
yep, seems like there's some serious downloading going on...
maybe kasper_h or somebody else can do a mirror?
greetz n thx,
sUsH
Click to expand...
Click to collapse
Uploaded to mediafire: http://www.mediafire.com/?mgwdnls5hhrbsnw
This includes the new partitions, yes?
AlexsamaM said:
This includes the new partitions, yes?
Click to expand...
Click to collapse
First post, last couple of lines. If you already have new partitions, you're set. If you don't have them, the installer creates them.
Benjamin
Downloading the ROM right now. I haven't tried your earlier ROMs and kernels but I have heard a lot of good things about them. I wish you all the very best.
PS: What's the hoopla about the new partition layout? I'm sorry to be stupid but I have tried reading posts and it just doesn't seem to get into my head. If someone can explain the differences between the older and the newer layout or even give me a link to read, I'd be very grateful
Thx for this rom. I see your default governor is smartassv2, do you prefer it over wheatly? And how does the new bfq scheduler differ from sio?
dherre65 said:
Thx for this rom. I see your default governor is smartassv2, do you prefer it over wheatly? And how does the new bfq scheduler differ from sio?
Click to expand...
Click to collapse
http://lmgtfy.com/?q=wheatley+governor
http://forum.xda-developers.com/showthread.php?p=19846297
dherre65 said:
Thx for this rom. I see your default governor is smartassv2, do you prefer it over wheatly? And how does the new bfq scheduler differ from sio?
Click to expand...
Click to collapse
SmartassV2 and SIO have always worked very well for me and other, so that's why I set them as default. Wheatley & BFQ v4 are both still in testing, so others can choose them as well, but I don't want to make them the default just yet.
BTW, for me, wheatley & bfq work very well.
adityak28 said:
Downloading the ROM right now. I haven't tried your earlier ROMs and kernels but I have heard a lot of good things about them. I wish you all the very best.
PS: What's the hoopla about the new partition layout? I'm sorry to be stupid but I have tried reading posts and it just doesn't seem to get into my head. If someone can explain the differences between the older and the newer layout or even give me a link to read, I'd be very grateful
Click to expand...
Click to collapse
The idea is simple, /system & /data have been swapped. Now /data is on the faster part of the internal memory (which is beneficial because there is lots of writing on /data) and /system (which is only read) is on the slower part of the internal memory. Disadvantage is that /data is now limited to 422MB, so people with lots of apps complain (although the solution here is to move apps to SD to save space on the smaller /data).
Welcome to Lightning ROM
MAJOR UPDATE, REV3, CHANG LOG IN SECOND POST**********
The goal when creating this today has been simple. Squeezing the most performance out of the T-Mobile Galaxy S III as I possibly could, without destroying your battery. This ROM was build with two things in mind - optimization and speed. Nuff said. It is based off the official Jelly Bean leak as of late last night and wild child's deodexed version he was kind enough to throw down. It will probably impregnate you, with twins, then not pay you child support. If you are ready to propel your device to levels above 9 thousand, you should probably keep reading. You have been warned. IT IS FAST! ..... yet... friendly...
Like myself, in the spirit of android, I am sure you all love customization. I am doing something a little different with this. Rather than add all the toggles, mods, themes, etc, I focused today on the performance aspect and will leave the theming up to you, and after you get it set up the way you want (as there will soon be and already is tons of pretty extras for this build) revert to post 2 of this thread for a nice little guide to odex this bad boy straight from Android UI via terminal emulator. I'll take care of the tweaking, you theme it the way you want, then wrap it up with some memory optimization of your own, or don't. Sound good? Thought so
Getting right down to it - a quick list of things modified here, and I know I am missing some things:
-Init.d support
-Busybox
-Deodexed (until you odex - see post 2)
-Rooted - duh
-CIQ removed***
-Debloated: removed a lot of stuff, but it is all avail' in the market, youtube, etc, you would have had to update it anyways -__-
-File system and SD read optimized for speed
-added freeza's custom CPU script to init.d ***see changelog in post 2
-Build.prop has been modified.
*added the 0 ring delay script
*wifi scan adjusted to 600
*media streaming optimized
*media recording optimized (video and image)
*data speeds optimized
-Database df on each boot / sql support - totally kanged this from somewhere else it was kanged... all credits due
-Memory optimizations
-Default IO scheduler optimized for flash-type disks (android devices)
-Carefully modified CPU parameters with performance in mind. Tweaked values to optimize IO throughput during heavy workload and multi-tasking, yet on the other end, CPU cycles are greatly reduced when system is not under heavy load. You will see this in performance :highfive:
INSTALLATION - follow this to the T, or I will ignore you. And keep in mind you might still have issues. Not every device is the same.
1. download ROM, put it on your external SD card, and verify it is good with an MD5 check
2. once all is well, boot to recovery
3. do a factory reset/data wipe (I have always been in the habit of being thorough and formatting anything 3 times)
4. format/wipe system (3 times recommended)
5. flash ROM
6. reboot (it will take a couple minutes)
7. once the device boots, let it stand alone for about a minute or so (i typically wait until it shuts off the display on its own) and ENJOY
NOTE: DO NOT TRY TO SIGN IN TO DROP BOX. I REMOVED IT. DL FROM MARKET!!
Also, some other things removed: browser, YouTube, calculator, some other stuff. I didn't remove anything that was not available in the play store. Wanted to keep it light weight. Do not try to sign in to anything other than your google account when you boot. Again, enjoy.
thanks to wild child, freeza, virus, steelH, dj, luke, ktoonz, and many others. mad respect to you all. i have implemented things that are either your direct work or things i have learned from you. so here is my humble shout out. if there is something i left out, somebody i didn't mention, please forgive me and post in this thread and call me out, i will happily update the OP with thanks. respect to you all
REV_3 - ready, set.. ok click now!
With morfic's kernel..... clocked at 1.83
ok... so if you are like me, and you REALLY wanna get intense with this, and just make it as bad A as you possibly can, keep reading....
This will essentially odex all files in your /system/framework and it will do it straight from the Android UI via my personal favorite app ... this is good because it frees up mem, and reduces DVM size. OPTIMALLL
1. download the odex.zip here --> PURPLE
2. extract all files with a file explorer, i prefer root explorer or fx file explorer
3. place the extracted folder and all of it's contents in /data/local/tmp ... so you should have /data/local/tmp/odex/+(misc files in new odex directory)
4. give the new directory and ALL contents FULL permissions. full read, write, and execute perms. your file explorer, if it has taken you this far, should be able to accomplish this
5. download this app TERMINAL EMULATOR dont worry it is free. open the app
Type the following commands - each new line should be executed with the enter key:
su (hit enter, it will ask for root)
/data/local/tmp/odex/odex (hit enter, you will see
you will see a bunch of outputs. there will be a message when it is done (honestly, like 10 seconds if that) saying something like "enjoy your hybrid ROM"
type "reboot recovery" (without the quotes)
device will boot into recovery immediately after you hit enter...
wipe cache and dalvik cache once more each, and reboot your device.
viola <--- this was spelled wrong. but i am going to leave it. because i can. rofl
THANKS*** freeza for sending me the the odex script, and you're welcome, for the bootclasspath for the script.. lulz. and thanks freeza for convincing me to download titanium backup again... and you're welcome for giving you the peace of mind that you can odex framework from android. el o el
****change log*****
rev3-December 1st, 2012 -uploading
-added morfic's alpha 23 kernel. OC'able to 1.83, no UV, L2 cache tables optimized, CPU hot plugged (for now, panel of=cpu1 off), pretty much an overhaul here. performance is ridiculous.
-removed CPU tweak by freeza (i still love you tho)
-optimized IO, AGAIN. adjusted ondemand parameters for a little bit better performance
-removed unneeded scripts from init.qcom.post_boot.sh file - positive effect on IO
-cleaned up build prop, added scripts for TCP windows, added network hack by... somebody... can't remember. File is in /etc/init.d/ "internet"
-optimized BT audio streaming
-added properties for optimal accessibility of T-Mos spectrum/towers
-disabled unneeded logging - save CPU cycles and power
-debloated some more. lightweight. DO NOT... try to sign in to dropbox upon first boot (if it even gives you the option) download the latest version of the app on the play store.
rev2-NOVEMBER 19, 2012
-removed some UI audio sounds (charger connection [for those that listen to music], lowbattery sound, volume toggle sounds, other annoying useless sounds such as boot up and power off)
implemented freeza's CPU control script for some amazing performance and battery life. thanks bud, as always, great work. i have been running this since he was finished with it, and it is absolutely amazing. your device with tons of unique and user friendly, editable scripts.
-freeza's CPU script adjusts CPU parameters for both cores based upon whether your device is charging, and how much battery you have left. it is a performance and battery friendly script that is power efficient and editable depending on what YOU want your device to do.
beta1-
initial release
all the things...
In rev 2, with freeza's CPU mod, you can navigate to init.d and you will see a "70cputweak" file. if you open that up, you can adjust CPU values and parameters of governors to your liking. for now, i left them as is - the way they were when freeza gave them to me. edit them with a file explorer and reboot and you are now adjusting your OWN values based on the performance and battery YOU desire. follow instruction in OP to flash
Thanks will try this later today
Sent from my SGH-T999 using xda app-developers app
Does teathering work on this?
ScottBroker said:
Does teathering work on this?
Click to expand...
Click to collapse
wireless/native? no. but my easy tether app works perfectly. i'll implement it, if i have time, in beta2... i haven't slept in two days lol
OP updated
Will the odex.me app work with this rom? I'm not lazy, just curious if there's an easier way to odex..tia
Sent from my SGH-T999 using Xparent Blue Tapatalk 2
Yeah does the odex me app work the same way than doing all that other stuff?
Sent from my SGH-T999
which tether app you using ?
Thanks
Odex me app will not work
great Rom thanks
Is this still running Touchwiz? How much RAM available? Other then your optimizations for speed what has been added or removed? Are animations gone due to the optimizations?
EGBTMagus said:
Is this still running Touchwiz? How much RAM available? Other then your optimizations for speed what has been added or removed? Are animations gone due to the optimizations?
Click to expand...
Click to collapse
All I have done is tweak properties listed. Didn't mess with animations, or anything. You guys can do all that with a theme, kitchen, etc... I would recommend wild child's work. It's great stuff. Like I said the reason for this is because after you get it the way you want, you can go in and odex it and finalize your OWN build the way you want it to look. I'm not too big on aesthetics. But I can make your device run better
And to answer your question, yes, it is still running touchwiz launcher by default. Again I would recommend apex or nova. touchwiz is awful IMO. nothing unique about it.
Rom looks great will be testing it tonight!
Can anyone confirm wildchilds kitchen is working?
Sent from my SGH-T999 using xda app-developers app
Liking the rom so far, only issue I have come across is that I can't get App2ExtSD2 working.
Can we use your Odex wizardry in any deodexed TW Rom?
SiNJiN76 said:
Can we use your Odex wizardry in any deodexed TW Rom?
Click to expand...
Click to collapse
yeah
http://forum.xda-developers.com/showthread.php?t=1994048
Thanks...didn't know he created a separate thread.
Anyway, the first thing I noticed was that when I try to sign into Drop Box from the initial boot sequence, it FCs... I also got nowhere near the Quad score the OP got. Mine was in the 3Ks. Just my experience.
CIQ?
SiNJiN76 said:
Thanks...didn't know he created a separate thread.
Anyway, the first thing I noticed was that when I try to sign into Drop Box from the initial boot sequence, it FCs... I also got nowhere near the Quad score the OP got. Mine was in the 3Ks. Just my experience.
Click to expand...
Click to collapse
I got over 5K in Quadrant, but I also came from a 100% stock phone (reset it to make sure there were no issues). DropBox fails intially because he removed dropbox from the rom.
EDIT:
I can't seem to find the stock web browser... has it been removed?
Tweaked CM10.1+PA3.0+AOPKmr1=ParanoidKangDroid V2.03 JB 4.2.2 ROM(03.01.13)
This really isn't ParanoidAndroid, AOKP, or CyanogenMod anymore. When you put them all together you have something totally new. With this ROM you can do interesting things like having new rows of toggles and many other things that you'll have to find on your own. However keep in mind that on some occasions different settings can cause conflicts with others considering they're not supposed to be together in the first place, so just be smart about what you do.
the customization is endless to create the L00K you like!
3/01
Serious tweaking for battery stability and performance
signal and data tweaks
build.prop Modifications
custom kernel is included, it contains the following:
Linux 3.0.66
Compiled with GCC 4.7
O3 optimization flags
Overclocking to 1.836 Ghz
Underclocking to 96 Mhz
Voltage Control
Fast Charge
Plenty of performance tweaks for optimal speed and battery life
added PIMP MY ROM app for some more tweaking that will make you phone MORE STABLE!
info below about app
Pimp my Rom is an app for rooted users that will allow you to choose between a plethora of tweaks, mods, hacks, apps and features to your current ROM.
This app has been proven to improve the performance of your device on many points.
Pimp my Rom can be used on ANY Android Device, running ANY Rom
Some of the features include :
>> Build.prop Tweaks <<
- Better jpg image quality
- Better camera recording quality
- Lock launcher in memory
- Battery savings
- Disable kernel error checking
- Dalvik VM tweaks
- Faster scrolling
- Better touch responsiveness
- Faster browsing and download speed
- Allow purgeable assets
- Reduce dialing time
- Misc 3G tweaks
- Deeper sleep
- Reduce black-screen time of the proximity sensor after a call
- Smoother video streaming
- Faster wifi connect/disconnect
- Overall smoothness improvements
- Increase the size of VM heap
>> Enable/Disable Android Features <<
- Enable hardware video acceleration
- Disable Android logger
- Enable Android logger
- Enable gpu UI rendering
- Enable HSUPA
- Enable JIT (Just In Time) Compiler for Dalvik vm
- Disable Normalized Sleeper
- Disable Gentle Fair Sleepers
- Disable New Fair Sleepers
- Enable surface dithering
- Disable Boot-Animation (doesn't work on ics and +)
- Disable usage-data sending
- Disable volume buttons wake
- Disable adb notification icon
- Buttons backlight always enabled when screen on
- 16bit Transparency
>> Multitasking <<
- Choose between 4 levels of OOM (Out Of Memory) Groupings : Low/Mid/High/Very High
- Choose between 4 levels of Minfree Low Memory Killer settings : Low/Mid/High/Very High
- Choose between 2 levels of ZRAM Compression : 64mb/128mb
- Tweak your kernel to be adapted and stable on high multitasking conditions
- Tweak your Dalvik Virtual Machine to be adapted and stable on high multitasking conditions
>> Add Features & Mods <<
- Add support for OpenVPN connections
- Install Beats Audio binaries & dsp manager for a greater sound experience
- Install Adrenaline Boost Script
- Install Sony Walkman suite : Music Player & Visualizer, Clearbass soundfx and Image Gallery & Editor
- Install Bravia Engine
- Install xLoud
- Install Touchwiz Launcher
>> GPS Configuration <<
- Choose between 79 countries + 5 continents of gps.conf files
(Having the right gps.conf file for your country is esssential for the accuracy and lock-speed of your GPS)
>> Internet Security & Stability <<
Security :
- Protect yourself against SYN attacks and the DoS (Denial of Service) they cause by reinforcing your tcp/ip stacks
- Block redirects
- Block source-routing : source-routing allows one to fully trace the packets he sends, thus it can be used by blackhats to hack into your device
Stability and Speed :
-Increase queue and buffer size of all tcp sockets to make it more stable in high broadband consumption conditions
- Avoid TIME-WAIT state by re-using the Sockets in time-wait state. Reduces network memory-loading
- Various IPv4 speed improvements
- DNS tweaks for faster name resolution, thus faster connection to websites
- ppp0 interface speed tweaks
2/22
Changed "System"to"Interface"Removed duplicate Notification Drawer settingsNow compiled with GCC 4.7 toolchainAdded 96 Mhz clock speedAdded voltage controlAdded fast charge
To enable fast charge or to undervolt, just go into Performance Control
2/21
Updated to Android 4.2.2
Updated to CM 10.1
Updated to ParanoidAndroid 3.00
Updated to AOKP mr1.1 build 1
Added Update Center under Settings
Updated bootanimation
I added my own custom kernel that contains the following:
Overclocking to 1.836 Ghz
Underclocking to 192 Mhz
Plenty of performance tweaks
Linux 3.0.65
11 /27 Changelog
Merged CM10 Stable
Merged AOKP Milestone 1
Merged ParanoidAndroid 2.55
Kernel is default clocked at 1.512 Ghz (overclockable to 1.836 Ghz)
Added Animation Manager
Reorganized some stuff in Settings
Updated 4.2 Keyboard
Updated MMS app
Added more AOKP toggles
Fix volume rocker when screen off
New AOKP circle mod battery
Add alpha settings to circles lockscreen
Added Circles unlock screen (Under CM+ Settings)
Updated SuperSU
Updated CM File Manager
Fixed bootloop when changing UI
Added Sound tab under Advanced Device Settings
please check out screenies http://forum.xda-developers.com/showthread.php?t=1944523
Donations to Romcrazguy
Big thanks to thebz1
Instructions:
CWM: Install Rom: Download Mirrorhttps://www.dropbox.com/s/fa7n22vl1g7fuqd/PK-2.03-TWEAKEDd2tmo.zip Thanks to Lokichim!!
MD5: 68e6c3561a6d2b4c78ad4ced36c84a91
PLEASE DO FULL WIPE & Make sure the file you download is
CWM: Install Zip: please flash 12/12 this was confirmed to work[/B]:http://goo.im/gapps/
CWM: Wipe Data/Factory Reset
CWM: Advanced/Wipe Dalvik Cache
Reboot and edit your Apps Dpi & Layout under Settings/Paranoid Settings
If you want to explore the various phone modes, tap "Configuration," chose an option, wait for it to finish, then do a manual reboot
ParanoidAndroid's webpage: http://www.paranoid-rom.com/
AOKP's webpage: aokp.co/
Themes and other goodies you can find here: http://forum.xda-developers.com/show....php?t=1646034
Check "Auto Hide" in Settings, System, Statusbar, to finally get Fullscreen
If you have an issue and you want to call my attention, here's what you do:
1. Try everything you can, find solutions for yourself. Wipe caches, revert all your settings you have made, go back to your stock Kernel, factory reset if you have to or reflash the rom. Assume that the issue is on your side and try your best to isolate it.
2. Search this thread, Cyanogenmod's, ParanoidAndroid's, and AOKP's as well for possible reoccurences of your issue and hopefully solutions that may have come up.
3. If you think the issue is important enough that we should cease our work and look into it, post your issue, BUT ...
... stay friendly, do not demand anything, do not threaten
... explain your issue as precise as you can, name the exact apps and conditions that cause trouble, help us to replicate the issue right away. If we can't there's no way we can fix it and your post will simply clutter the thread
... collect evidence, keep in mind this is a developer thread so even if you are not one, do us the favor and research how to record logcat. logcat is the single most important help you can give us to resolve your issue.
Pebble Blue Samsung Galaxy S III running THE BEST JellyBean ParanoidKANGdroid!
Reserved
Reserved ..sorry
first...
This is what I have been waiting for!
I love both AOKP and PA. I can't wait to give this ROM a spin
Are there any videos showing off all the features and settings?
Sent from my SGH-T999 using xda app-developers app
No not the yet because its still a pretty new ROM if you have questions feel free to ask anytime I will try to help you as much as I could
My ParanoidKang Android Tmo S3
Rock and Roll... I'll give it a run this afternoon and she rolls! Thanks man!
Ive tried flashing the AT&T version numerous times with no luck. I asked for it over on the other thread and my wish has been granted. Thank you kind sirs. :thumbup:
Sent from my SGH-T999 using xda premium
Im currently playing with I love the customization on this rom. Though ive had couple of random reboots.
Fresh installed it ffrom PA, do you think my backed up nandroid from original PA here the data can be advanced restored to this rom?
Sent from my SAMSUNG-SGH-t999 using xda app-developers app
---------- Post added at 08:03 AM ---------- Previous post was at 08:02 AM ----------
jhenderson81 said:
Ive tried flashing the AT&T version numerous times with no luck. I asked for it over on the other thread and my wish has been granted. Thank you kind sirs. :thumbup:
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Well it was for ATT. LOL
Sent from my SAMSUNG-SGH-t999 using xda app-developers app
No I tried doing that as well however restoring data from your backup will end you up in a bootloop . In terms of reboots I have experienced none try downloading lean kernel the latest and you should be good to go!!
My ParanoidKang Android Tmo S3
I installed it myself to give it a go, but IMO, it seems to be capable of a lot, but the UI just doesn't feel as good as the PA one. I've only played around with it in Tablet UI, but a few things I've noticed is that the navigation bar buttons are too far apart and that the app switcher UI isn't as refined. It is nice having all the toggles work, though. I'll be switching back to PA once the next release comes out.
The recent task manager actually is more advanced than you think (layout is a lil off but if you play with it im sure it could be fixed) what i like about it though is that it actually identifies know much ram your using (see screenshot)Anyhow When you setup tablet mode did you set it up via pa settings or ROM control because it does make a difference
My ParanoidKang Android Tmo S3
Guys here are a few screenshots of My ParanoidKang Android Tmo S3
I'm getting a lot of fc's...example:Google search...gallery...settings...And the stock browser isn't even working...it won't open...
Sent from my SGH-T999 using xda premium
did you wipe fully? make sure you clear cache and dalvik as well as fixing permission. if that doesn't work try reflashing again could be a bad flash .
phordych05 said:
I'm getting a lot of fc's...example:Google search...gallery...settings...And the stock browser isn't even working...it won't open...
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Romcrazguy said:
The recent task manager actually is more advanced than you think (layout is a lil off but if you play with it im sure it could be fixed) what i like about it though is that it actually identifies know much ram your using (see screenshot)Anyhow When you setup tablet mode did you set it up via pa settings or ROM control because it does make a difference
My ParanoidKang Android Tmo S3
Click to expand...
Click to collapse
I set it up through PAPrefs. I don't really care much for the total free RAM since I'm pretty sure we never run out of RAM lol.
FRIGGEN AWESOME! Downloading now.
Guys, for some reason my home button doesn't work anymore... any ideas why? It stopped working right after I flashed this rom, I was on PA before. I can get into recovery tho while the phone is off, so I know its not psychically broken. Any help is appreciated