I just bought T MOBILE Touch Pro2
Whenever i speak people are telling thet the volume is too low and feeble
Is there are any work around for that mic fix
Thanks!
Any fix please!!
There is a fix to enlarge the incall volume, but no fix to enlarge the voice(as I know).
Just try another Radio or ROM. The offical ROM really sucks!
Related
Problem: volume level in MDA III
Hello,
Description of the problem:
During the phone conversation when using the loudspeaking mode, the volume of the sound is considerably lower than while using the same speaker by other applications (tom-Tom or Destinator). It forces me to use headphones while driving a car. But the experience with other aplications shows than it could be heard louder: both amplifier and speaker have such a possibility.
Has anybody faced such a problem. If yes, what is the solution?
Regards
Zdzich
Wow, good point. I never thought of that but you are right.
Did you try pushing up the volume slider whilst in a call? I know it may sound sily, but I have to ask.
Sure.
Definitely a bug with 1.40 ROM and speakerphone...
so far I have yet to see or find a solution...
I did not have this problem with the 1.33 ROM on my SX66.
Is there a way of lowering the speaker volume?
When I am on a call, despite having the volume set to the minimum, it is still too loud.
Anything I can do?
Same for me here. If anyone knows a way please let us know
Have you guys actually lowered the phone volume to minimum, or the PDA volume by mistake, there are two sliders, if I set the phone to minimum you cannot hear a thing! - or when answering a call are you holding the answer button too long causing the phone to use Speaker phone volume - Mike
My Orbit is the same,
Same Problem here.
I set the speaker volume while talking to minimum and it stays too loud.
Hi!
I have the same problem.... unfortunately it can not be solve, with the volume level setting..
I have the HTC P3300 and have no problem with the volume however would love to increase it a bit louder. Is there a tweak for this?
Thanks,
In call speaker volume is to loud also
I've got the same problem. Eventhough I set call volume to minimum the speaker is much to load. Any of you found a solution to this problem?
Same here....volume way to amplified
I have the same problem,
One minute my phone was fine - sounded great, 5 minutes later when I used it again the "In-Call" volume and "Speaker" volume are WAY to loud.
Anybody got a clue as to why this is happening and how to fix it, its driving me mad!
(I hope this is a software fault and not hardware)
Thanks,
Fakiee
RMAd
Ok so the phone was still in warrenty. T-mobile sent an RMA bag (RM special delivery) for me to send the phone to their repairs:
http://www.sbe-ltd.co.uk/
I sent the phone and reported the problem as "in-call speaker distorted". The repair was made and completed the next day (yesterday) then sent back via special delivery so my phone should arrive back today.
I doubt SBE have fixed the problem. They most likely watched the phone turn on then sent it back. But we will see. If they have not fixed it I will be replacing the "in-call" speaker myself. I will post the guide here if it solves the problem.
MDa II "in-call" speaker FIXED
SBE returned the phone and completed the repair. Im assuming all they did is replace the "in call" speaker. For those who cannot RMA the phone I suggest a search for MDA III internal speaker on the bay then follow the dissasembly guide and replace.
Hope this helps!
Volume still too loud
UPDATE
After the unit was RMA'd i realised that infact they had not fixed the problem. The ring and incall volume is still WAY to loud.
When I recieve a call i have the incall speaker (when you have the handset next to your head/ear) set to the lowest setting and the sound is almost defening, if i have it on the highest setting it distorts the speaker and is inaudiable.
This is a problem with the phones hardware or software and not the wrong settings. Can anyone please help, is their a registry setting for general volume settings that can be adjusted?
Thanks for your help,
Andy.
I had the same issue, but this was after i had tampered with the registry settings to increase the volume on the wired earphones. It is a fine balance! Suggest re-installing the OS to get back to deault settings if you have been in the registry
Running Shaps 4.31 ROM, after I installed the driver to get sound from the E100 headset (Remote_controller_Y-cable_T1_070316.CAB) the screen stoped rotating when I slide the keyboard. I asume this is controlled by a registry key, anyone know how to change it back?
Also wondering if there is a way to get the buttons the E100 to work with Hermes, the only thing I've found in the forum is the above mentiones cab to get sound but not the rest.
Hello,
I get the same problem after installing the cab Remote_controller_Y-cable_T1_070316. No more automatic screen rotation...
Anyone get an idea how to fix it?
fortunately, the rotate screen icon is still working but I miss the automatic flip.
Thxxx
ps : I'm using PDACornerPro.V10
I found another but more annoying problem after Remote_controller_Y-cable_T1_070316.CAB.
After a few minutes of conversation, the micro and speaker are down, at the moment of the screen is becoming black, due to energy saving.
I have to tap the screen to relight it et after to select speaker to be able to hear and speak with my correspondant again...
Anyone an idea how to fix this?
Or does anyone knows another solution to use the RC E100/W100 headset than installing the remotecontroller cab?
thxxx
I have a TP2 unbranded phone I bought of off ebay when it first came out. I have had no problems with it till two days ago. Now when I use Microsoft Voice commands I have to speak really loud into the mic for it to hear me or when I call someone I have to speak really loud before they hear me because my normal voice isn't being picked up by the phone. Its also the same if I use speakerphone. I was wondering if the audiopara3 file can be changed to fix this or if there was a registry hack or cab file to increase mic sensitivity. I have wrote other threads regarding this but not much help. So now I am offering 45 dollars to whoever fixes my problem.
Thanks.
Install this app and reboot
This should fix your prob
what app my phone has no mic right now.
try a hard reset ...
or try a different rom ...
Could be just the mic went bad
Have you tried toggling the auto volume control? (settings, all settings, system, auto volume control)
Hi, I didn't found any similar problems, so I start new thread.
I have LG KS20 and changed some ROMs on it, but the problem remains the same.
When I call somebody or somebody calls me, he hears strange sounds similar to if I'd be near some big speakers, not echo, but you know, when you put the phone near audio speaker, you hear these sounds. After about 10 seconds it becomes silent and almost gone. I think it has something to do with inner microphone and speaker, I should say the microphone is overboosted, so when I get in call, it after 10 seconds automatically controls itself quiet, but when a new call, it starts over again. However I didn't find in registry anything related with mic gain control, I should try to minimize it's boost at first.
Do you have any thoughts how to fix that strange sound?
I have the same problem,
Does someone know a solution
And I have that problem, did anyone tried with handsfree is it same or is it better?
I should try that soon, also I will maybe try to clean mic somehow...
Anyone help?