Hey so I've tried searching other threads for my specific challenge and none of them seem to really touch on this so here goes.
I have a Samsung Fascinate, I'm rooted and I've flashed a bunch of kernels and ROMs no problem and as far as I can tell my Bluetooth works fine and audio works fine.
My issue is this: My car supports hands free calling via bluetooth and i've paired them with no issues and have made/received calls no problem. I've also used my phone to play music through the AUX cable no problem. I know that my car STEREO does not support Bluetooth and here is where i run into a problem.
I have my phone plugged in on my way to work singin along to my favorite tune when a call comes through. But (I think) when the AUX is plugged in, it interferes with the audio when connected to the bluetooth. Basically i can hear a call coming through on my car stereo and i can push the buttons on my steering wheel for functions on the phone but i can't hear and the other end can't hear me. So i have to end up unplugging the AUX cable out then the audio returns.
First off... is it just me? did I do something wrong along my journey of flashing all sorts of stuff? cuz i could've sworn at one point (i think before i went voodoo) it was all working fine together, but i could be wrong.
So if it's not something I did, is there a headset adapter out there with controls and possibly some kinda screen for like caller id or at least current track? like something that can connect to regular earphones that has an inline mic and controls.
Unless you fine folks have a better idea I would love to hear them. (I don't have a budget for this... just want to get it working... unless it's cheaper to buy a new car that can support it all)
Thanks
I think this is a fascinate specific or limited problem
http://forum.xda-developers.com/showthread.php?t=894452
Related
I searched around, but I didn't find an answer to this specific question. I have an HTC Evo, and a regular Bluetooth headset. I'd like to be able to play music/podcasts/whatnot through the headset.
It works great for phone calls, but once the call is over, it goes back to using the speaker. I'm assuming this has something to do with Bluetooth profiles since I was actually able to play music through Bluetooth in a car I rented a few weeks ago. I had to change the audio setting on the car, so it seems like the Evo can send audio through Bluetooth if it detects a certain profile (A2DP?).
Is there an app that allows me to choose to reroute my audio from the speaker to a regular bluetooth headset that only supports the headset and hands-free profiles? If not, I may need to see how feasible it would be for me to make one.
I have been searching in vane for Android software that would play regular audio through a regular bluetooth ear piece (that is normally used for a phone) rather than the external speaker or audio jack.
If anyone knows of such an animal, please let us know.
I realize what you're asking for, and I'm just going to tell you, odds are it's not going to happen. From what I've heard, the Bluetooth API's are fairly limited, and telling the system to use a BT Profile for something it wasn't meant for (and will sound horrible on, nevermind kill the battery life of your headset) won't be easy.
I'm not saying it's impossible, just not very likely to happen at this time. You'd probably be better off getting a decent pair of BT headphones instead. Sorry.
It won't work. Different protocols. If you get a bluetooth stereo headset that has a mic then it will work with both protocols.
This has been on the top of my list (along with a widget for enabling/disabling background data) since I got my Evo. I used this feature a lot on my Moto Q9C.
But I hadn't been able to find anything until now.
The audio quality isn't great but so far "Super BT Mono Froyo Free" is working well enough. I haven't disconnected my headset yet, so I don't know if it will reboot the phone. But the comments in the marketplace say to use a task killer if it happens.
I'm actually considering getting the full $6 version after the 5 days are up.
I just wish there was a way to make the call button function with the media player instead of starting the voice dialer.
Edit:
Have to change the media volume via settings or when the screen is off to increase music volume.
My jabra bluetooth headset allows this to happen but that bluetooth is meant to stream music through it also.
Sent from my GirLiE Evo with Tapatalk
what about these: http://cgi.ebay.com/New-Black-Motorola-S9-HD-S9HD-Wireless-Stereo-Headphone-/260631900070?pt=Bluetooth_Wireless_Products&hash=item3caedf2fa6
granted, they ship from Hong Kong so you're looking at a good 1-3 weeks for delivery (i got mine in about a week and a half)
But anyways, they work great for me. they answer calls, control track skipping, play/pause and volume. i love 'em.
App Work Around
I had the same issue with my headset. I went to the Android Market and searched. There are multiple apps out there. I got BTmono Free which allows you to play audio over your bluetooth if you pay for the $1 version you get more options. There are a few more other programs out there that do the same thing.
Good luck.
Thanks for the find Abini. d/l'd BTmono and it works like a champ for playing both music and for Netflix on my rooted EVO 2.2
I am pretty new to Android and still trying to get all the grips on I need. As of now, there is one thing that really bugs me badly.
I use the device for Sat-Nav driving a lot, I have a semipermanent installetion in my car from my previous smartphones. Basically just a power feed and a 3,5mm Jack that come out of the dash panel where the device holder is mounted. I recharge plug in for recharge as needed. The audio jack goes into the device, from there to a so-called Fastmute box behind the dash which is connected to the stereo head unit (the loudspeaker output cables running away from the head unit to be specific. The Speaker lines are interrupted by the box and just pass through whatever audio is being played back by the stereo. However, once there is current on the 3,5 audio jack (i.e. speech from the SatNav) the music immediately goes mute and you can hear the turn instructions in perfect quality through the car speakers. Once the signal fromthe satnav dies down stereo music comes back.
For my taste this beats most commercial, fixed systems.
Now, since I am on Android weird stuff happens.
On a first testrun shortly after I gut the Desire (which was o2 branded stock 2.1 at that point) I noticed that I do not get any announcements through the fastmute. Checked the jack, opened the dash to check internal wiring, retried a mp3 player. It's all good on that side. The accouncements come through the device speaker, hard to hear, easy to miss a turn etc. I do not why or how, but it seems that the audio routing takes a route different from other audio. This had me pretty much meh!
Well few days later, now with a ModaCo R8 custom ROM and Froyo I was hoping for good luck and gave it another whirl. Of course, no dice. When I plug in the jack of the supplied headset (which I assume doubles as a handsfree) I get the symbol for that in the upper symbol bar. When I exchange that headset jack with the regular 3,5mm jack the symbol looks different, but still vaguel like a set of speakers.
But now here comes the completion of the mindfaq... I had the SatNav volume at about medium (so barely hearble with driving ambient noise) when the phone went and I took the call through the Bluetooth Handsfree instaalled in my car and was distracted by the call (the car came euipped with the BT Handsfree from factory, so the stereo goes to "pause" and the conversation is routed into the vehicle speakers.. A few minutes into the call I suddenly hear a perfectly well understandable, clear turn instruction hopping into the phone conservation. I was extremely intrigued and was hoping that I discovered that CoPilot can route instructions either into A2DP or more likely emulate a "call event" that results in routing the audio into the according BT profile.
However, after that singularity I tried reproducing this for a god part of an hour, driving a route that forces many instructions from the SatNav, all the while calling my own answering machine fo have an connection established.
Sorry for the lengty explanation. Questions:
1 Has anyone ran into this before? What was your solution? Bear with it, switch SatNav software, avoid listening to music in oder to not miss any turn directions?
2. Is there a hack, hidden configuration that would enable me to _force_ this audio routint into the direction of the BT Handsfree, making it think it is an incoming call?
As a fellow co-pilot user I share your frustration.
You will probably find that it's nothing as technical as it not routing to bluetooth or whatever.
Co-pilot has a nasty habit of messing with it's own volume setting when a headset is plugged in. It tends to reduce itself down to zero without notification or cause. You would try to reset the volume, but firstly, it wont go more than a third of the way up, and secondly, it will simply jump back down to zero again on it's own.
They know about this issue and their response is not to use it with a headphone jack!
It is rather annoying!!
I have an Acura, and every bluetooth phone I have had in the past I could pair with the car, and plug in an Aux line to the headphone jack to listen to music, then if a call came in, it would come through my spearkers.
Now with the EP4g, it comes through the speakers, but no one can hear me, and I can't hear them until I unplug the aux line.
Anyone else have a problem?
i had a conference call on my phone in the car via my AUX input today. The parties were heard through the speakers of the car and they were able to hear me, but complained about a really bad echo and that I was VERY hard to hear. These in car conference calls were fine on my EVO with the same setup. I have not tried the in car bluetooth yet as I didn't think I would need it. Will be trying that next.
Just did a test with my Nissan and had to pull out the AUX cable before I could hear the other end on my speakers. The other end said they could hear me the entire time.
Something is going on with the aux cable. I really like the phone, but I don't like trying to figure **** out.
http://forum.xda-developers.com/showthread.php?t=1291889
I was under the impression that the mic becomes disabled when the AUX cable is in. Had similar behavior on my old Palm Centro. It went into "headset" mode and the mic turned off. In my thread, someone said that it is working fine. Perhaps there is something else causing it?
Do you use or does the Samsung voice dial app automatically launch when you put your aux cable in? Mine does. The mic does not work for it either. Maybe its the culprit?
***** My issue was fixed by changing the TTY settings *****
Settings>Call Settings>TTY mode>TTY VCO
Its just an aux cable, no mic to it. I plug it in and dont see anything in the status bar and no apps launch.
Right, but when the AUX cable is put in, the Microphone on the epic is disabled, at least that's my working theory. IDK, maybe its just something with mine, but at the moment, no-one can hear me when the aux cable is installed, and i cannot use the voice search applications
***** My issue was fixed by changing the TTY settings *****
Settings>Call Settings>TTY mode>TTY VCO
I will give that a try, any idea what that mode does? Manual doesn't really help.
Bielinsk said:
I will give that a try, any idea what that mode does? Manual doesn't really help.
Click to expand...
Click to collapse
VCO stands for Voice carry over. I could be wrong on the exact purpose, but i understand that it is designed to allow those with hearing impediments but capable of speaking to use their own voice while their speaker is hooked up to another device to assist in hearing.
Basically, it keeps the microphone on the device "ON" while the audio is outputted to another device. In our case, the car speakers.
Otherwise, when the device is outputting audio, it is looking for another source of voice input. If you car had a hands-free option built in, it would work just fine without changing the setting as the voice input would be coming from the hands free option.
Just a guess really. Glad its working for me, hope it works for you!
Yes it wierd, My car does have bluetooth built in, but when the aux cable is plugged in it doesn't send sound to the handsfree. Not sure what the issue is.
mrloserpunk said:
***** My issue was fixed by changing the TTY settings *****
Settings>Call Settings>TTY mode>TTY VCO
Click to expand...
Click to collapse
Can anyone also confirm that this works?
I have an iphone 4s right now, but I really want to go back to android and get a GSII, but that bluetooth problem was a big hassle when I had the Epic 4G. However, with the Epic 4G, someone wrote an app that would allow you to reroute sound through bluetooth with the aux was plugged in. I'm hoping there's a fix out there...
Anyone have a solution for this one?
I have a 2008 car with factory installed Bluetooth phone interface. The Bluetooth is ONLY for the phone, not music. The car also has an aux in jack for the stereo. (Know where I'm going with this yet)?
Yesterday I was listening to music using the 3.5 mm jack on the phone, and it was also connected by Bluetooth to the car's phone interface. A call came in. The stereo automatically muted like it should but when I answered the phone I couldn't hear anybody there. After 30 seconds or so I hung up.
Then it dawned on me, with something plugged into the 3.5 mm jack, the phone audio may have been routed through that jack instead of Bluetooth. BUT the car assumes that when a call comes in you want the stereo muted so it kills audio from everywhere except Bluetooth. I suppose I could have reached over and unplugged the 3.5 mm jack, but that's inconvenient when I'm driving.
So, the question is, is there any way to set up the phone to always route phone call audio through Bluetooth when Bluetooth is connected?
I have the same issue.
I listen to music in my car via a cable from the headphone jack to my car stereo's aux in. If I get a call over bluetooth, I can't hear anything. If I unplug the cable on the phone side, I can hear the person on my car speakers, and the caller can hear me via the car's mic.
Are you using the stock firmware or a custom ROM? If it isn't a problem on a custom ROM then perhaps it can be fixed. It's very annoying -- my 3-year-old HTC Hero could do this, why can't the S3?
I was told by someone with a different version of the S3 (an international one) that this isn't an issue on their phone.
I'd love to find this out while I still have time to return the phone.
I'm going to try building a "car adapter cable" that feeds audio out the USB port to see if that works, Instructions are in this thread:
http://forum.xda-developers.com/showthread.php?t=1395173
That could be one option. Still seems pretty lame that we have to come up with workarounds for this pretty basic problem.
And I'd love to hear from someone running a custom ROM to try and figure out if it's a hardware or a software issue.
so whenever i use my phone in my car, i have it plugged into an auxilary port on my car stereo. problem is that with this phone (never did this on my old phones) whoever i'm talking to can hear them selves echo. i'm pretty sure the problem is the mic volume of the galaxy s3. is there a way to adjust this so that it won't pick up the other persons voice coming thru my car stereo? of course i could always turn down my car stereo (which i haven't actually tested but i'm assuming it would work) but i'd rather just have a permanent fix if possible.
thanks