Develop Bugs

[GUIDE] How to configure VoIP/SIP client in WM6.

Here is an example of VoIP provisioning for WM6.
Claims that it does not work have been greatly exaggerated.
Actually, it works quite well for me (test done a Wizard based on a modified Orwell ROM).
Check if the VoIP is support is present in your ROM, as some cooks have removed them from the ROM.
so look for the Internet Calling today item as well as for the following files from the packages VoIP and VoIPOS in the \Windows directory:
[*]ipdialplan.xml
[*]dnsapi.dll
[*]voipphonecanvas.dll
[*]rtcdll.dll
If you don't have Internet Calling support in your ROM, complain to your favorite cook, not me.
Internet Calling is an integral part of WM6 and should not be removed.
For the HTC Wizard, the Orwell1984, the PDAViet ROMs, MB ROM and mUn_aRTM_10_2_0_8_WWE have the necessary modules.
For other devices, try it for yourself, as I don't know the specifics of the ROMs..
Ok. Let' go to the setup on how to do it.
Simple: 1-2-3 steps.
you will have to create a _setup.xml file with your provisioning information, any text editor will do, use the attached sample as a baseline.
run the following command: cabarc N myVoIPsettings.cab _setup.xml
get your newly created .cab file on the WM6 PPC and run it.
Note: if you don't have cabarc, you can get it from http://support.microsoft.com/kb/198038
Voilà! You might have to turn on your Wifi (it does not work over GPRS/EDGE)
and select "Whenever Available" as an option in Phone/Menu/Options/Internet or Settings/Phone/Internet.
Soon, you will be connected to your preferred VoIP provider...
As sample of the _setup.xml file is attached as _setup.xml.txt.
You can also see its content in the following section.
Code:
<wap-provisioningdoc>
<characteristic type="VoIP">
<parm name="SIPSettings"
value="<provision key='1232ab01' name='_sip_provider_name_'>
<provider name='_sip_provider_name_' />
<user account='_account_' password='_password_'
uri='sip:[email protected]_host.com_'
allowedauth='digest'/>
<sipsrv addr='_sip_proxy.com_' protocol='UDP' role='proxy'>
<session party='First' type='pc2pc' />
<session party='First' type='pc2ph' />
</sipsrv>
<sipsrv addr='_sip_registrar.com_' protocol='UDP' role='registrar'/>
</provision>" />
</characteristic>
</wap-provisioningdoc>
So get the attached _setup.xml.txt and do the following modifications:
rename _setup.xml.txt to _setup.txt (not obvious to every one according to the comments in this thread),
replace _sip_provider_name_ by your provider name,
_account_ and _password_ by your user name and password,
sip:[email protected]_host.com_ should be your SIP address,
_sip_proxy.com_ and _sip_registrar.com_ are your SIP proxy and registrar,
sometimes it's the same thing as your sip_host.com.
Sometimes not. It depends on your provider.
save the file as _setup.xml and run the cabarc N voip.cab _setup.xml
transfer the cab on the PPC and run it!
How to check your installation?
-
If the provisioning worked you should find a Prov0SIPSettings under the directory \Windows\System\VoIP.
Creation date and time should match the instant when you ran your .cab file.
If you don't find one, that means that you have a syntax error in your _setup.xml file.
To demonstrate the process, you can use my attached file without any modification.
It will create Prov0SIPSettings file, but nothing will work with the dummy settings of my sample file, of course .
To activate Internet Calling over 3G (thanks Sleuth255 & Golfman),
go to the HKLM\Comm\RTC\AdapterTypes with a registry editor (like Total Commander),
now delete both the "1" and the "2" values that are here,
next reset your device and Internet calling will connect over the data connection for your phoneservice.
If you need to re-apply different settings (if you changed your .xml file and .cab),
you will have to delete first the Prov0SIPSettings file under \Windows\System\VoIP
prior re-applying your new .CAB file. Otherwise, your new settings will be ignored.
Let me know how you do on this.
Enjoy!
--eluth, the comparison Guy.

One additional information, if you start dialing.
You probably will have to customize the ipdialplan.xml based on your region & VoIP provider requirements, in order to have the proper phone numbers dials.
The default one assumes a US SIP proxy in 425...
Cheers.
--eluth.

incase those files you have listed doesnot exist, what is the way of getting them. Can you arrange a cab or something?

I'm missing the files too and which program do i need to run the "cabarc" command?

I amended the post to point to where to download cabarc.
The link is http://support.microsoft.com/kb/198038
You can also just google for cabarc and you will find it.
As far as the ROM itself is concerned, if you don't have "Internet Calling" on your today screen and cannot enable it, I'm sorry. Please complain to your cook or use another ROM that has it. See my amended initial post for details.
Regards,
--eluth.

Wow I have been waiting for ages for this! We use an Asterisk SIP at work and would love to do away with my other softphones... A few (maybe) silly questions:
1) edited replied above
2) ipdialplan, can you include an example?
3)When you say "if you start dialing" do you mean just dialing with the standard Phone application?

Nearly there.......
I followed eluth's instructions and I'm nearly there..... I need a SIP server now
I installed the cab I created with some dummy settings and I can see the Wizard attempt to register with the SIP server address I have added to the _setup.xml file. The 'Internet Calling' today plugin now says 'Searching...' whilst it attempts to register with the SIP server, after it times out it now says 'No Service'.
Excellent. I will take a look at what files and registry settings are created so I can include this in my own ROM
Andy

I've installed the WM6 SIP Cab from the FTP (ftp://xda:[email protected]/Hermes/WMXL_Support_Files/WM6VoIP.CAB)
but the files in the windows dir are still missing.

Eluth you rock!
Have it working on mu Universal with Helmi rom + VOIP cab file. If I am on WiFi with Voip set to whenever available, my phone provider is no longer Orange but my SIP server! I think there might be some pissed off telcos soon!
It seems the calls are "forced" through speakerphone but works fine with a bt headset.
Connected and making calls through our Asterisk SIP (although only through my shortcut numbers, I expect I need to work on the dialplan file).
Anyone out there capable of making a document on how the dialplan file should be generated?
Once again eluth, well done! This is the main reason I moved to WM6 and now I have what I wanted!

raix said:
I've installed the WM6 SIP Cab from the FTP (ftp://xda:[email protected]/Hermes/WMXL_Support_Files/WM6VoIP.CAB)
but the files in the windows dir are still missing.
Click to expand...
Click to collapse
you need show all files on

So i have to install another CAB?

This is EXCELLENT news !!!!! Good work !
Could the leadspeaker only problem be caused by the Radio Rom not supporting SIP?
(Sorry for the Newbeeee question) ?
I was just wondering whether WM6 devices will support SIP just like a normal GSM call in terms of using the handset speaker ?
(Im dying to try this out, unfortunately my Universal has a very bad case of alignment issues, and I cant get pas the screen alignment screen... Sigh.....)
Anyway thats excellent news !
Please keep the information coming for us poor plebs with non working bricks

How to with WinCECab
How do I creat the .cab with wincecabmanager and in what directory to install??

I followed your guide, and made the cab file (i had to do that a few times to get the correct sip sittings)
I have an asterisk network, and this connects perfectly over wifi, calls are clear and FAST! (i am not sure which codec the MS sip stuff uses though)
i am using the 3DES rom.
I was suprised that the sip dialing is using the normal EAR speaker, not the one on the back of the phone! so thats very cool!
When dialing numbers i am having to type in 00countrycode (eg. 0044) instead of using the numbers from my address book +countrycode (eg. +44), it just wont dial with +countrycode, i think this is due to the regional settings maybe.
thanks for the guide, very cool stuff!

nicely done eluth! You beat me to this one I was missing the cabarc piece of this for doing the WM provisioning.... (put off till MEDC actually).

papamopps said:
How do I creat the .cab with wincecabmanager and in what directory to install??
Click to expand...
Click to collapse
Hello papmopps,
... Actually you don't. WinCeCabManager is for creating CABs with files inside (software install).
What we are doing here is to create a cab for XML provisioning.
You do that with cabarc or makecab (Microsoft free tools), not WinCeManager.
Look for XML Provisioning with Cab files in msdn for more info.
Regards,
--eluth.

raix said:
So i have to install another CAB?
Click to expand...
Click to collapse
Raix,
Which device/ROM are you using?
--eluth.

Ok, vonage soft phone is working perfectly. Calls to my softphone use regular headset speaker and transfer to BT if my headset is active. In fact, when active I can make calls to my softphone and my regular cellphone number.
WM6VoIP.cab is mine btw and will enable VoIP fully on WM6. Here are the Vonage settings:
_put_account_here_ = your 11 digit softphone number
_put_password_here_ = the password assigned to it (combination of 10 random numbers/letters)
Here's the provisioning:
Code:
<wap-provisioningdoc>
<characteristic type="VoIP">
<parm name="SIPSettings"
value="<provision key='1232ab01' name='Vonage'>
<provider name='Vonage' />
<user account='_put_account_here_' password='_put_password_here_'
uri='sip:[email protected]'
allowedauth='digest'/>
<sipsrv addr='sphone.vopr.vonage.net:5061' protocol='UDP' role='proxy'>
<session party='First' type='pc2pc' />
<session party='First' type='pc2ph' />
</sipsrv>
<sipsrv addr='sphone.vopr.vonage.net:5061' protocol='UDP' role='registrar'/>
</provision>" />
</characteristic>
</wap-provisioningdoc>
note: if no joy, try making the following registry setting change:
HKLM\System\VoIP\SIP
EnablePort5060 = 1
edit: note, I didn't have to make this registry change to enable my softphone account.

bummer.... while calls transfer to my BT headset, there's no sound at all.... This will take a bit of troubleshooting I'm afraid.

eluth said:
Raix,
Which device/ROM are you using?
--eluth.
Click to expand...
Click to collapse
Sorry i forgot to mention that.
I'm using a Hermes with Kyphurs XDA Live 0.2 Rom.
After the Installation of the WM6VoIP.cab the needed Files in the windows dir are still missing.
Nevertheless i created a cab with my settings and installed it but that didn't work, because there are no entries in the Windows\Voip Dir.
But i'm sure this whole thing will be fixed
EDIT:
Damnit i forgot to check "Show all Files". All neede Files are there! Even a settings file after installing my cab. But the SIP Client can't connect to sipgate right now (still says "not available"). I'm going to check and test my settings now!
EDIT2:
I just forgot the Port after the SIP Server.
with sipgate.de:5060 everything works fine!
Great work!

Samsung SGH-i600 Home Screen Carousel/Card Wheel Plug-In

Hello,
has someone tried to use the Samsung SGH-i600 Home Screen Carousel/Card Wheel Plug-In on a HTC Excalibur ?
Or does someone know a download link ?
Thanks

I'm sure once its released we'll be able to find it and the version of flash required to run it. As far as I know its only on the European i600 which isn't out yet.

Hi,
in Germany you can buy the i600 for a few weeks.
I hope that someone will extract the files from his i600.

I switched from a S620 to a i600 2 weeks ago because I wanted a UMTS Smartphone. The i600 caroussel software is nice to look at but generally the i600 is not as stable as the S620 was, there are frequent lockups for no apparent reason. It also feels slower and that may be caused by the caroussel software.

Hello Flavio,
is it possible to extract the caroussell files and the xml from the i600 ?
Thanks

Newchurch said:
Hello Flavio,
is it possible to extract the caroussell files and the xml from the i600 ?
Thanks
Click to expand...
Click to collapse
Indeed, if we can get our hands on that it should be real nice.
I know the Moto Q community is looking to grab it as well. Seeing as it's just a plugin/.xml it shouldn't be too hard I would suspect and if it can be coupled with a .cab installation it'd be fantastic.

It supposedly doesn't have a recently used applications card on the wheel and it doesnt support other home screen plugins.

indiekiduk said:
It supposedly doesn't have a recently used applications card on the wheel and it doesnt support other home screen plugins.
Click to expand...
Click to collapse
Yes, but it's still worth trying out in my opinion.

This is the home xml for the Carousel theme.
Still need to find the DLL...
Anyone?
PHP:
<?xml version="1.0"?>
<home>
<author>Microsoft Corporation</author>
<contacturl>http://www.microsoft.com/</contacturl>
<title lang="0x0409">Card Wheel</title>
<version>1.0</version>
<default target-width="240" target-height="320" font-face="Segoe Condensed" font-size="14" font-weight="bold" padding-left="4" padding-right="4" bgcolor="transparent" fgcolor="COLOR_HOMETEXT" padding-top="2" b-border-color="COLOR_HOMERULE" b-border-width="1">
<format state="selected" fgcolor="COLOR_HOMEHIGHLIGHTTEXT"/>
</default>
<scheme>
<color name="COLOR_TRAYGRADLEFT" value="#000000" />
<color name="COLOR_TRAYGRADRIGHT" value="#000000" />
<color name="COLOR_TRAYBKGND" value="#000000" />
</scheme>
<plugin clsid="{837FC251-FE69-43ad-84E0-EBCEDEBA0884}" name="iconbar" height="20">
<iconbar fgcolor="COLOR_TRAYTEXT"/>
<background bgcolor="COLOR_TRAYGRADLEFT" b-border-color="COLOR_WINDOWFRAME"/>
</plugin>
<plugin clsid="{6BC0CE3D-42F7-44be-A02D-C0253F86D879}" name="Carousel Homescreen" height="266">
</plugin>
</home>

doedoe said:
This is the home xml for the Carousel theme.
Still need to find the DLL...
Anyone?
Click to expand...
Click to collapse
Cool! We have a way in...
Okay, using something Resco Explorer or some explorer/search utility, look under \Windows on your for a .dll probably with "Carousel" as the key word. You should find something like "CarouselHomePlugin.dll" or "Carousel Homescreen.dll" or something similar.
I'm not sure if we need more than that as I don't see a background image listed and I guess the .dll is all we need along with the clsid? Anyways just upload them here and we can find out ;-) Basically attach anything with the word "carousel" in it.
(on a side note, I had no idea that MS evidently made this plugin and homescreen? Guess it really is a brief glimpse into "Photon")

We've got the best people working on getting this(some of my buds from TC). I am looking so forward to this, keep up the great work!!!

wrong thread

The posted XML code for the homescreen (page 1 of this thread) shows 2 class names:
{837FC251-FE69-43ad-84E0-EBCEDEBA0884}
{6BC0CE3D-42F7-44be-A02D-C0253F86D879}
Maybe you can search for this values with a registry editor on an i600 device. There should be keys with the appropriate names under "classes". The subkeys maybe contain information concerning the DLL name. At least this is what I suppose.

Well
I cannot copy the dll, my device should already be application unlocked...
Anyone know why I have:
- a samsung sgh-i600
- all file installed in my device
but this home screen doesn't show up in the selection under settings menu?

You most likely need to dump the rom to retrieve the homescreen dll. We also need Flash to run this homescreen. Have you dumped a rom before?

stepir said:
Well
I cannot copy the dll, my device should already be application unlocked...
Anyone know why I have:
- a samsung sgh-i600
- all file installed in my device
but this home screen doesn't show up in the selection under settings menu?
Click to expand...
Click to collapse
It's in Settings->Display->Home Screen->Home Screen layout->Card Wheel

Newchurch said:
Hello Flavio,
is it possible to extract the caroussell files and the xml from the i600 ?
Thanks
Click to expand...
Click to collapse
I found the carousel.dll and carousel.xml in \Windows but cannot copy it with Resco Explorer. Any tips how to get it to a Storage Card?

Flavio said:
I found the carousel.dll and carousel.xml in \Windows but cannot copy it with Resco Explorer. Any tips how to get it to a Storage Card?
Click to expand...
Click to collapse
can you do it through activesync?

try changing the attributes ,the dll might have the read only attribute selected so try and unchecking this ?

I'm pretty sure you'll need to dump the ROM to get a copy of these files. Its quite easy. Follow post #11 here
http://discussion.treocentral.com/showthread.php?p=1203197

How to customize the Chome WM 6.5 ROM

Here is a little tutorial to customize the Chome WM 6.5 ROM , this discovery is credited to sebastien13.
First go to Xda and download this tool:
http://forum.xda-developers.com/showthread.php?t=497232
It will enable / disable the tables and put in the order that suits you.
Then download it here:
http://www.mediafire.com/?sharekey=5330c72c2c98e20d8c9e7c56ba37815f9a999fb92eb8f0ee
By RayFiles :
FRA : http://www.rayfile.com/files/c61370e3-2a62-11de-9a58-0019d11a795f/
WWE : http://www.rayfile.com/files/1424a33d-2a63-11de-a68b-0019d11a795f/
Disable Chome Today the once unzip the folder, copy "cmhomeres.dll.0409.mui" in Windows and "mxip_WWE_CHome_Programs.provxml" in My Documents. Launch "AdvancedConfig" Menu-Import. Provisioning XML, then click My Documents, the box at the bottom click mxip_WWE_CHome_Programs.provxml, wait 5 seconds and then "OK" and "Completed."
Today's Chome reactivate, you will have a "Programs" and in addition by dragging right or left 9 programs will appear.
You can also change the programs and the order among 9.
This example is for the left softkey:
<characteristic type="HKLM\Software\Microsoft\CHome" translation="filesystem">
<parm name="SK1TEXT" datatype="string" value="Calculatrice"/>
<parm name="SK1URL" datatype="string" value="\Windows\MobileCalculator.exe"/>
</ characteristic>
SK1TEXT is the text of the left softkey in all tables
SK1URL is the way to the program.
For 9 programs:
<characteristic type="HKLM\Security\CHome\DefaultSettings\CWelcomeCenter\Page1" translation="filesystem">
<parm name="ACTIONURL" datatype="string" value="\Windows\Hibernate.exe"/>
<parm name="TEXT2" datatype="string" value="Récupération of RAM"/>
<parm name="TITLETEXT" datatype="string" value="Mise in route"/>
<parm name="TEXT1" datatype="string" value="Hibernate"/>
<parm name="SK2TEXT" datatype="string" value="Hibernate"/>
<parm name="SK2URL" datatype="string" value="\Windows\Hibernate.exe"/>
</ characteristic>
ACTIONURL AND TEXT1, TEXT2 : command Tab
SK2URL AND SK2TEXT : command right softkey
So, I count on you a little to further improve ease of use of this new interface. Post your experience and if you find something else do not hesitate to share it.

Reserved for update

Oh, thanks a million. Very usefull guide.

Thanx chanvi 4 this tutorial.
It works perfect!

Thanks again Chanvi!
This is exactly what was missing for me with CHome ... and I had been trying very hard to do this with the launcher panel in TitanWeather but with little success.
Quick word of warning to other users though -> Edit the Provisioning XML before you go and import it!
(lol, at least read the thing before you import it and then come one here posting complaints )
In it's current state it is a great example of how to customise your "Programs" panel but I imagine most people are going to prefer to keep "Contacts" as their SK1 key (whereas this xml will change that to be Calculator ... on every panel)

Thanks the.decoy for the warning
A little change in 1rst post :
ACTIONURL AND TEXT1, TEXT2 : command Tab
SK2URL AND SK2TEXT : command right softkey
So you can have until 18 programs .

Works like a chrm for me.
3 quick questions :
> how to show on the picture panel, the photo in \storage card\my documents\my pictures ? by defaut it uses My picture in my device ...
> how to add a favourite contacts tab (that would be very useful and could make CHome at the level of M2D....) ?
> is it possible to add more than 9 favourite programs in such tab ?

Test 3
Accidental Post, Removed

Then download it here:
http://www.mediafire.com/?sharekey=5330c72c2c98e20d8c9e7c56ba37815f9a999fb92eb8f0ee
Hi,
could someone upload in other mirrors than mediafire?
it doesnt work in China.
thanks a lot
ciao

I have been setting up the Programs panel, and I am trying to work out 2 things:
- What is the "ADC" page for? (i.e. why "ADC", not "page10"? can I just use any name? etc)
- Why is my "Page2" page no showing up?
I noticed that in the registry all of the other (visible) pages have two things under their reg entry:
(1) These two keys (although the PICTURES value ranges from 2500-2509)
"PICTURES"="2501"
"GUID"="{2F710F22-9F19-43fa-8F35-9927D246B078}"
Click to expand...
Click to collapse
(2) A sub folder called "0409" which seem to be remnants of the original WelcomeCenter panel. eg:
[HKEY_LOCAL_MACHINE\Software\Microsoft\CHome\CWelcomeCenter\Page1\0409]
"TEXT2"="Set date and time"
"TITLETEXT"="Getting Started"
"TEXT1"="Clock"
"SK2TEXT"="View All"
"ACTIONURL"=":MSWelcomeCenter;\\Windows\\wc_setdatetime.0409.wcml"
Click to expand...
Click to collapse
...
Actually, nevermind about "Page2", I just fixed that by manually creating the GUID and PICTURES keys myself (GUID is the same for all of them and I just gave it the PICTURES value of 2502).
Still curious what the deal is with "ADC" ...
Also trying to find if there is a way to set specific icon pics for each Page (instead that default one from the original WelcomeCenter pages).

hi
i first post there is a program that I can't find it. " Launch "AdvancedConfig" Menu-Import "
plz help

darvish_boy said:
hi
i first post there is a program that I can't find it. " Launch "AdvancedConfig" Menu-Import "
plz help
Click to expand...
Click to collapse
Advanced Configuration Tool by Julien Schapman

pisdu said:
Advanced Configuration Tool by Julien Schapman
Click to expand...
Click to collapse
Thanks pisdu , i would like just to precise if your rom has NetCF 3.5 you can install version AdvancedConfig 3.3 , with NetCF2 advancedConfig 2.2
I'm with my PPC can you provide a link PL ?

"Re-import" mxip_WWE_CHome_Programs
Hi all.
One question:
After i import it once (the mxip_WWE_CHome_Programs file), i've made changes to the file (like switching some of the programs and the text that appears) and wanted to import the file a second time, but it gave me some error about the NETCFv35 (something like it had an error message avaiable for this exception but it was not possible to show).
My question is: How can i import the file, every time i make a change?
Thanks in advance.

NoTeu said:
Hi all.
One question:
After i import it once (the mxip_WWE_CHome_Programs file), i've made changes to the file (like switching some of the programs and the text that appears) and wanted to import the file a second time, but it gave me some error about the NETCFv35 (something like it had an error message avaiable for this exception but it was not possible to show).
My question is: How can i import the file, every time i make a change?
Thanks in advance.
Click to expand...
Click to collapse
I found that you can keep importing the provxml into AdvancedConfig over and over (whenever you make changes). No problems.

the.decoy said:
I found that you can keep importing the provxml into AdvancedConfig over and over (whenever you make changes). No problems.
Click to expand...
Click to collapse
I agree with the.decoy

CHome & Tasks
Hello
First of all Great Job for this Chome's customiser.
Do you know if there is a way to have also the tasks showing on the main screen of Chome or at least in your programs link of chome. I've tried 'poutlook tasks' in your xml file but without result. Any ideas ?
Thanks in advance

I have a problem i have xda2 6.5 on my wizard ,and i installed Chome configurator and titanium customizer , and pretty much messed up the things is there a way different than a hard reset that i can restore my chome default settings and try again thanks !

"Re-import" mxip_WWE_CHome_Programs
NoTeu said:
Hi all.
One question:
After i import it once (the mxip_WWE_CHome_Programs file), i've made changes to the file (like switching some of the programs and the text that appears) and wanted to import the file a second time, but it gave me some error about the NETCFv35 (something like it had an error message avaiable for this exception but it was not possible to show).
My question is: How can i import the file, every time i make a change?
Thanks in advance.
Click to expand...
Click to collapse
the.decoy said:
I found that you can keep importing the provxml into AdvancedConfig over and over (whenever you make changes). No problems.
Click to expand...
Click to collapse
Well, i can't seem to import it for the second time... keeps popping the message...
Did you soft/hard reseted?
Nor reseting or disabling CHome works for me...

NoTeu said:
Well, i can't seem to import it for the second time... keeps popping the message...
Did you soft/hard reseted?
Nor reseting or disabling CHome works for me...
Click to expand...
Click to collapse
Have you disable CHome be fore importing xml file ?

[6.5] Titanium plugins - overview for wvga users

A couple of weeks ago I made the switch from 6.1 to 6.5...because imo Winmo 6.5 is definitely an improvement over 6.1. The new today screen - also known as Titanium - is truly a joy to work with.
I know there's a thread for titanium plugins at the dev section of xda, but I had to go through a lot of trouble before getting them to work. So..I'm starting this thread where you can easily get the plugins.
For ease of use, you can download the files in this thread..Or you can go to the specific thread for further notice.
Here we go
1. First things first
When installing plugins, ALWAYS disable titanium.
Install MortScript on your device.
Install Chome Editor by showaco
2. The plugins
Artesea Twitter - Update and keep track of twitter!
Install by opening the 'Install.mscr' in the zip
CommManager - Turn on/off phone signal // wifi // bluetooth // data connection
Install the cab. When running titanium you can setup this plugin.
Titanium Weather - Lets you keep track of the weather
Extract the rar and install cab. C/P the 'TitaniumWeather.mscr' over the original at Program Files\TitaniumWeather (may be different). To change the location, visit accuweather and enter your respective location.
e.g. Haarlemmermeer, Netherlands --> EUR|NL|NL008|HAARLEMMERMEER
CLauncher // CSettings // CGames - Let's you launch applications in titanium
I've customized these 3 plugins to my own needs. It has 3 launchers with each 9 pages.
You can change the settings of these with Chome Editor.
e.g. You can change the condensed page - plugin label with this. Thus making it possible to enter a category of apps to your own needs.
Don't forget to enable the page 6 to 9 with Chome.
--> Install the 3 cabs and play with it in Chome!
Taskanium - The plugin I use the most on a daily base. Lets you view or add tasks in titanium.
Extract the rar. C/P Taskanium folder in your Program Files folder. Run 'TaskaniumInstall' on your device.
JMLStocks - Let's you view stocks in Titanium.
Extract the rar and C/P to your device or storage card. Run 'JMLStocksInstall.mscr'
Favorite People Plugin - The name speaks for itself
Install the cab.
Windows Live - Standard Live bar for titanium, which ofcourse is already included in wm6.5
I didn't get this one to work at first. But after playing with Chome Editor I've found a solution to get it work. Change the value for 'DISABLED' to '0'.
Ofc there are other plugins available for titanium, but I don't use them :x
I would like to thank those people who made these plugins available for us...THANK YOU!
ps. If there are other plugins you would like to add here, you can pm me so I can add it to the list.

Since I reached the max of 8 files per upload..
Here is the last one...so far
-edit-
Post #10 has another couple of plugins added to this list by GutsyTripod.
These plugins are:
CNitrogen
COffice
CFacebook
TitaniumNotification
JMLToday
Further info about these plugins can be found in that specific post.
Thanks GutsyTripod!
For the facebook icon, you should edit your Titanium_480x800.cpr file, which can be found in the Windows folder of your device. Replace the facebook part with this piece of code overhere.
Code:
<!-- CFacebook layout templates -->
<Layer ID="CFacebookExpanded" Visible="False" Width="480" Height="164" Clip="False">
<Layer ID="Page" Clip="False">
<!-- Large icon in upper right -->
<Image ID="PICTURES" Left="376" Top="-26" Width="86" Height="86" ScaleStyle="Stretch" />
<Text ID="TEXT1" Left="40" Top="45" Width="340" Height="42" FontFamily="Century Gothic" FontSize="10" FontStyle="Regular" Wrap="False" VerticalAlignment="Top" Trimming="EllipsisCharacter">
<TextStage TextOffsetType="TextOffsetDropBottomRight" Color="#00000000" TextOffset="1" BlurFactor="3" Alpha="1.0" />
<TextStage TextOffsetType="TextOffsetNone" Color="#FFFFFFFF" />
</Text>
<Text ID="TEXT2" Left="40" Top="80" Width="430" Height="60" FontFamily="Century Gothic" FontSize="8" FontStyle="Regular" Wrap="True" VerticalAlignment="Top" Trimming="EllipsisCharacter">
<TextStage TextOffsetType="TextOffsetDropBottomRight" Color="#00000000" TextOffset="1" BlurFactor="3" Alpha="1.0" />
<TextStage TextOffsetType="TextOffsetNone" Color="#FFFFFFFF" />
</Text>
Ofcourse you should change the font (in my case Century Gothic) to the font of your choice. Default is Tahoma I Guess. Remember that this is only for portrait mode!

Many thanks ive been trawling the forums for a couple of days looking for Titanium plugins and the best way to install them, and here it is ....sorted! Many thanks

excellnt titanium looks good now, but i cant get the location to work for basildon in the UK any ideas???

iamdarren said:
excellnt titanium looks good now, but i cant get the location to work for basildon in the UK any ideas???
Click to expand...
Click to collapse
Here you go mate
Basildon (essex) - EUR|UK|UK141|Basildon
Basildon (Thurrock) - EUR|UK|UK229|Basildon
Basildon (West Berkshire) - EUR|UK|UK239|Basildon

thanks but its not working?? :-S says its updated each time but theres no actual weather showing ??? i have set the code, as youve said, i managed to find the codes earlier.
I have no idea why this doesnt work? can you see if the location works on yours??
thanks

iamdarren said:
thanks but its not working?? :-S says its updated each time but theres no actual weather showing ??? i have set the code, as youve said, i managed to find the codes earlier.
I have no idea why this doesnt work? can you see if the location works on yours??
thanks
Click to expand...
Click to collapse
For the essex place, it's working (lovely 21 degrees )
Did you overwrite the TitaniumWeather.mscr' from the zip over the one at your program files/titaniumweather folder? (or where ever you've installed titanium weather)
That should fix it normally

It´s allways nice to see a thread like this. Very handy!

i didnt copy to mscr, works fine now!! thanks veruy much so helpful

More Cabs !
Here is a list of cabs that also work on the HD.
Plugins for Nitrogen Player, Microsoft Office, Facebook and text/email Notifications.
The jml today plugin is a replacement to the simple clock. probably best to disable it if using jml instead.
The cHome Editor is a must. It allows you to reorganise which order you want your items to appear. you can also disable/enable panels.
All tested and working. (except facebook doesn't seem to load on Miri's Roms for some reason.

taskanium does not install for me :[ when i trie to install it, it gets an error :[ im running dutty's 6.5 r9 rom. and yes my titanium is off and i have mortscript, etc. just this plugin doesnt work for me :[

crazililazn said:
taskanium does not install for me :[ when i trie to install it, it gets an error :[ im running dutty's 6.5 r9 rom. and yes my titanium is off and i have mortscript, etc. just this plugin doesnt work for me :[
Click to expand...
Click to collapse
Did you copy the taskanium folder into your programfiles folder?
From there you should run the taskaniuminstall file in that folder.
Should run properly since I'm also running Dutty 6.5 r9

my titanium weather doesn't connect to the internet by using the 3g connection.
if i try to update the following error msg appears
Couldn't establish internet interpreter.connection
Line 1
(\Programme\TitaniumWeather\TitaniumWeater.mscr): connect("The Internet")
Click to expand...
Click to collapse
i tried o rename "the internet" to "drei.at" with or without the queotes - it makes no difference
i even tried to replace instPath% with Programme - no difference

Even More Cabs !
Here is some cabs to change the icons of your titanium weather, all by Showaco.
just install, then when you go to settings in titanium weather go to "display options" at the bottom left corner to change the icon style.
If anyone has problems with weather not updating or they just get red x's instead of weather then you might need to add in the below mortscript file.
I dont have a cab but you just need to unzip it with your file explorer into Program Files\TitaniumWeather
Chocolate, Battenberg, Tiramisu (piece of cake!)

bamserl said:
my titanium weather doesn't connect to the internet by using the 3g connection.
if i try to update the following error msg appears
i tried o rename "the internet" to "drei.at" with or without the queotes - it makes no difference
i even tried to replace instPath% with Programme - no difference
Click to expand...
Click to collapse
Try only "Internet"

iamdarren said:
thanks but its not working?? :-S says its updated each time but theres no actual weather showing ??? i have set the code, as youve said, i managed to find the codes earlier.
I have no idea why this doesnt work? can you see if the location works on yours??
thanks
Click to expand...
Click to collapse
use the mortscript file i have just uploaded to post #14
this should solve your problem

GutsyTripod said:
Here is a list of cabs that also work on the HD.
Plugins for Nitrogen Player, Microsoft Office, Facebook and text/email Notifications.
The jml today plugin is a replacement to the simple clock. probably best to disable it if using jml instead.
The cHome Editor is a must. It allows you to reorganise which order you want your items to appear. you can also disable/enable panels.
All tested and working. (except facebook doesn't seem to load on Miri's Roms for some reason.
Click to expand...
Click to collapse
Ehm - why don't you refer to the JMLToday-Thread? The current version is 5.3 - and with much more WVGA-Skins (.plg-Converter makes it possible )
and JMLStocks - you can use the cab from the post - so you don't need a zip.
If I can help, please tell me
Greetz
Micha

MichelDiamond said:
Try only "Internet"
Click to expand...
Click to collapse
thx, update is working now.
but, another two problem appeared...
if i open the chmenu editor i can modify the path to the icons
somehow everywhere is writen "Program File" instead of "Programme". seems the plugin doesn't recognize my german wm6.5 correctly.
i corrected that so far, but then i get another problem
if i update, i have no icones. only the X - icon not found
if i open the editor again the path to the icons is shown as
"\Programme\Titanium Weather\\Programme\Titanium Weather\plgFiles\Spil\03.png"
the fat marked is too much. why? any ideas?

i think i solved the problem. i edited every single reg entry manually. now i have the symbols.
it appears that the tool doesn't work with a german wm6.5 100%.
a) everytime the path should contain "programme" there is a "program file"
b) init string für "internet" is called "the internet" > no connection
c) the path to the images is \Programme\Titanium Weather\plgFiles\Spil\03.png altough the images are stored in \Programme\Titanium Weather\Spil\03.png >> no images. i simply copied them to the "wrong" folder, instead of editing all reg entries.
d) somehow a part of the path is duplicated (see post #18)
e) i tried to modify the registry with the chome editor 1.6b > doesn't work for all settings, some have to be done with a normal reg editor.

You will find a German Version of Titanium Weather in htc-developers.de.
And yes - it's a problem with the icons in a ROM, which is not WWE. Needs double installation

Remove Software with CAB File

We would like to remove software from Windows Mobile Devices using a CAB-file, Can someone help with a step by step manual? Which files must the CAB-File contain, how is the naming, ,,, ?

on microsoft developer network I found the following example but don't how use it
Uninstalling an Application Example
<wap-provisioningdoc>
<characteristic type="UnInstall">
<characteristic type="My Application">
<parm name="uninstall" value="1"/>
</characteristic>
</characteristic>
</wap-provisioningdoc>

I wonder if this works with a cab, but you can use it in cpf (just rename the cab file to cpf and run it in device).

Are you wanting to remove software that is built into the rom?
If so, it may be a daunting task. Files that are "cooked" into the rom stay after being deleed.
It may be an easier task to cook a new rom for the devices (at least it would be for me), and leave out the programs you want removed.
As for making a simple cab file, it appears that is one of the things I lost when upgrading to windows 7! I had a bunch of notes on how to do it.
You can search the forums to find how to make a cab from an xml (the format you posted)