Related
UPDATE:
Here are some crap videos that show this working using both csip and sipdroid thru bt
BT CALLS
CALL & RECEIVE
SGT Call & Receive
this is directed at the poor souls that had to get cdma sprint tab and wanted phone function...i got phone working on viewsonic gtab easily with no radio,however gtab sucks compared to SGT imho. so i t n e'd much until i found a proper method of execution for cdma sprint SGT.
YOU WILL NEED THE FOLLOWING:
google voice number(free)
ipkall number(free)
gv apk(free)
sipdroid-also sets up pbx for you(free)
FYI
(in order to setup your free ipkall it will ask for a #;this is not a standard #. it will vary depending on service...eg. magnus-200.use sipdroid to autmagically set up for you then just transplant the info properly)
1.)google voice+number and setup account
2.)grab free number from ipkall and reg it with gv
3.)grab sipdroid and let it setup a new pbx for you
4.)set this devce to ring thru gv
5.)open sipdroid app and make dial call...
test on wifi and data
when dialing a number hit enter on kb instead of the #5 for sipdroid dialer, or you will get the "this device cannot make calls error"...i will figure this out and eliminate it, however i dont see it anymore but i need to break thru it.
i have been messing with csip cus i like the dialer alot, however i cant get it to setup right anymore. i can get it to register, but not to call right...but sipdroid works great and i cant complain about free calling from my tab using my gv number
please post finding and results....
thanks
if you are having issues or need more help, pm me or check some of my most useful REFS below:
Reference 1
(gurnted blog about sipdroid/sipgate/ipkall/sipsourcery setups)
Reference 2
(big part of setup procedure)
Reference 3
(public stun servers list)
I keep getting could not call. I have the GV app setup to use my SIP account and can see the outbound call attempting to go out.
Ikyo said:
I keep getting could not call. I have the GV app setup to use my SIP account and can see the outbound call attempting to go out.
Click to expand...
Click to collapse
make sure that:
you are dialing with sip app not gv
(i prefer csipsimple dialer)
ipkall number is registered with google voice
that sipdroid setup ur pbxes proper
after sipdroid sets up ur pbx for you try csisimple as well
(make sure to setup as international carrier/pbxes in account setup and same credentials as sipdroid used for setup)
test using your primary line. since i set this up i do not use my evo very much since the tab is better in every way.phone is not as good of course but tab is not meant to be a phone here so i am happy with what i have accomplished for free. also you will have to adjust latency in settings to improve sound quality to your liking.
Sadly, there is no support for the Bluetooth Headset (with mic) profile on the CDMA GalaxyTab. This will work but you will have to use the built-in mic on the GT for your calls until someone either patches the BT stack or builds a custom rom with full BT profiles.
This is the exact reason I can't wait for custom rom development to begin on the CDMA versions.
dougvan said:
Sadly, there is no support for the Bluetooth Headset (with mic) profile on the CDMA GalaxyTab. This will work but you will have to use the built-in mic on the GT for your calls until someone either patches the BT stack or builds a custom rom with full BT profiles.
This is the exact reason I can't wait for custom rom development to begin on the CDMA versions.
Click to expand...
Click to collapse
i use my moto bt headphones i listen to music with to make and receive calls just fine...not sure what youre referring to. only sipdroid supports bt. must select the experimental settings box. And try it. it works. not sure why you would say it doesnt w/o trying it yourself...if you had you would know it works...
once i can make nans i will begin sharing my roms. honesly the only thing i miss is my 100 battery and i will incorporate that and my fave framework anims when i begin...courtesy of fightspit and m4xLOL
MagnusRagnarok said:
i use my moto bt headphones i listen to music with to make and receive calls just fine...not sure what youre referring to. only sipdroid supports bt. must select the experimental settings box. And try it. it works. not sure why you would say it doesnt w/o trying it yourself...if you had you would know it works...
once i can make nans i will begin sharing my roms. honesly the only thing i miss is my 100 battery and i will incorporate that and my fave framework anims when i begin...courtesy of fightspit and m4xLOL
Click to expand...
Click to collapse
Which moto bt headset are you using?
2kmy477 said:
Which moto bt headset are you using?
Click to expand...
Click to collapse
MOTO S-9, the newer all black version works too please post results for others.
This works great!!!!!!!~
Care to help me out and get it setup? Once I have an understand of the right way, I could put a guide with pictures to help people.
I've tried this but unfortunately every ipkall phone number i get assigned is apparently already in use in someone elses google voice.
tried call the area codes ipkall provides and repeatedly cancelling and re-creating ipkall accounts in hopes of getting a previously unused number
I am wondering if you could just use a Sipgate number.
I'll try to help with his tomorrow. Magnus walked me though this this afternoon and there were a few hiccups but it's working flawlessly now.
Sent from my SPH-P100 using XDA App
Ikyo said:
I am wondering if you could just use a Sipgate number.
Click to expand...
Click to collapse
Yep you can...but you only have 60 free mins with sipgate.
Sent from my Samsung Galaxy Tab
I can make calls but when I call my google voice number back all it does is ring 6-7 times and the go to VM
[email protected] thank you for that. I am guessing the hiccups that you had are the same issues that I had.
jkhouw1 said:
I've tried this but unfortunately every ipkall phone number i get assigned is apparently already in use in someone elses google voice.
tried call the area codes ipkall provides and repeatedly cancelling and re-creating ipkall accounts in hopes of getting a previously unused number
Click to expand...
Click to collapse
getting the same issue.
There is another way to do this, but it isn't as clean. You need to obtain a Sipgate account or any SIP provider that allows free incoming calls. Once you have that, you register it with your google voice account. Then you will need to configure Sipgate with either sipdroid or csip.
To make outbound calls:
On the tab, log into your google voice account. You will then be presented with a web dialer and can select the sipgate account to have the call sent to
Inbound:
will ring your sipgate account
Ikyo said:
There is another way to do this, but it isn't as clean. You need to obtain a Sipgate account or any SIP provider that allows free incoming calls. Once you have that, you register it with your google voice account. Then you will need to configure Sipgate with either sipdroid or csip.
To make outbound calls:
On the tab, log into your google voice account. You will then be presented with a web dialer and can select the sipgate account to have the call sent to
Inbound:
will ring your sipgate account
Click to expand...
Click to collapse
This man knows what he's doing.
Sent from my SPH-P100 using XDA App
I found out what I was doing incorrectly. Here is a run down that will hopefully help everyone on a way to do this.
Step 1: Download SIPDroid from the Market Place
Step 2: Obtain a google voice account
Step 3: Launch SIPDroid and instruct it to create a PBXes.com account for you with your google voice account information
Step 4: Go to IPKall
Step 5: Go to the settings of SIPDroid and write down the first account information (should be [email protected])
Step 6: On IPKall, put in the XXXX-200 for the sip # and pbxes.com for the sip proxy
Step 7: Register your IPKall number with Google Voice (if gives an error ask it to Verify the information. It will then dial your SIPDroid software and ask for a 2 digit number. It might take a couple of times before it recognizes it.)
Step 8: You are now ready to make calls and receive calls.
There are a couple other options that remove the need for the IPKall, but it requires having multiple SIP accounts setup. I currently have 3 setup on my Tab.
Is there an advantage of using three sip accounts?
Sent from my SPH-P100 using XDA App
Has anybody, running Gingerbread / CyanogenMod 7, tried using the built-in SIP stack?
I'm able to connect to my Aretta VOIP account successfully over wifi, and I can receive incoming calls on my Evo. But when I try to place an outgoing call, nothing happens.
I select the SIP adddress in the call log (say [email protected]), and instead of going to the call screen, it just flashes back to the call log.
Anybody else try this? I'm wondering if anybody has successfully made outgoing calls using their SIP account in 2.3.
Thanks!
I've been able to make sip calls using sipgate plus Gvoice callback
Sent from my CM7 Powered device
imekul said:
Has anybody, running Gingerbread / CyanogenMod 7, tried using the built-in SIP stack?
I'm able to connect to my Aretta VOIP account successfully over wifi, and I can receive incoming calls on my Evo. But when I try to place an outgoing call, nothing happens.
I select the SIP adddress in the call log (say [email protected]), and instead of going to the call screen, it just flashes back to the call log.
Anybody else try this? I'm wondering if anybody has successfully made outgoing calls using their SIP account in 2.3.
Thanks!
Click to expand...
Click to collapse
I have an account setup with Pbxes.org to make calls using my google number, and it works great, better than Sipdroid on froyo i gotta say.... i have sucessfully received and made calls. not sure what your problem might be
Hmm...
Well, that's encouraging.
Do you guys change any of the options under "Optional settings"? I have tried leaving the outbound proxy address blank, and have also used my server address there. Neither seemed to make a difference.
If either of you guys want to share your settings (minus sensitive info), that might help.
Thanks!
imekul said:
Hmm...
Well, that's encouraging.
Do you guys change any of the options under "Optional settings"? I have tried leaving the outbound proxy address blank, and have also used my server address there. Neither seemed to make a difference.
If either of you guys want to share your settings (minus sensitive info), that might help.
Thanks!
Click to expand...
Click to collapse
well i didnt really change any settings tho... just used my username password and server, and i checked the box to make it my primary account.
Huh... I wonder what gives.
I'm able to place calls just fine using CSipSimple.
I'm updating to #5 build of CM7, so maybe that will help.
Worked for me, though the sound volume is far too quiet in SIP calls.
It also doesn't work for me (HTC Desire, Oxygen RC7).
same for me
I can recieve calls.
I can use fring, 3cx or sipdroid correctly.
But each time i use the built in app of gingerbread it says "Numero indisponible" which is unready number. If someone has a fix
thanx
I'm having the same issue on a Nexus One running CM7 build 30. Inbound works fine, SIP account is registered. But outbound fails without a message. The screen just goes to the call-log with no sign of an error. I'm trying to enter a regular phone number, ie: +1-212-555-1212 because that's what I do from my other registered SIP phones. My provider is voip.ms
One thing that struck me, where is the dial-plan? And if there is none, what is the proper format for dialing numbers?
I'm having the same issue as mentioned in the OP...Incoming calls work fine, but outgoing calls do nothing. (SIPdroid works fine)
Has anyone been able to find a solution for outgoing calls?
CM7 sip
EVO runing cm7 can recive called just fine, just can not make any calls. No error just closes the dialer when you try to place a internet call.
However the Desire CDMA running CM7 can make and recive internet calls just fine.
Is anyone working on a fix for the evo sip problem?
CM7 sip dial
OK I got the built in dialer to let me make internet calls, if you leave the secret blank on the sip server you are connecting to it will let you make and recive calls with the CM7 gingerbread SIP
Any ideas how to make android 2.3 work correctly with a SIP secret?
In sipdroid and other similar apps, I have the option to set a STUN server, which is needed to make calls if you are behind a NAT. There's no option in the gingerbread's sip settings to set a STUN address. There's an Outgoing proxy option but if I set that as my STUN server adress, the account won't register.
Any help would be appreciated.
Edit:
I manged to make it work. I've set the address for Outgoing proxy the same as the server address. No I can make and recieve calls over the native android SIP client
Not connecting because there's no internet connection
I'm having issues (release and #38) with the integrated SIP not registering because it believes there's no internet connection when in fact there's an active 4G connection. SIP works fine (obviously with MUCH worse quality) over 3G so it seems there's some bug with 4G either dropping actually, reporting that it's dropped when it isn't or blocking SIP. I don't think it's the latter since CSIPsimple works in similar circumstances over 4G. Overall since 3G works perfectly most of the time it seems to be a 4G issue. I am also having problems with the mobile data connection dropping despite the integrated and CSIPSimple being set to receive calls and thus presumably always keeping the data connect live.
Hi,
I have an evo with DeckRom on it (gingerbread). I'm trying to get skype to be my default dialer, or even better to have it prompt me for what I'd like to use as a dialer (phone or skype).
I can't for the life of me figure this out. Phone doesn't show up under settings-applications-manage-all. I've cleared defaults from gocontacts.
I've tried uninstalling skype, then rebooting the phone and redownloading the app.
Still nothing.
Other thing I might like is the ability to choose google voice to make outgoing calls if that is available.
Thanks in advance.
Bump for this. I'm having the exact same issue on my thunderbolt running stock/rooted debloat. Any help would be great as I'm retiring the thunderbolt and basically turning it intoca glorified pda/voip phone.
Google voice can be set as a default dialer/SMS/voicemail app but Skype I don't believe will set as a default however on decks gb rom in settings under calls you can set up a SIP account for voip calling with no added apps it will use the default dialer to call over ip
When I first installed skype, android gave me the option to choose how to complete the call. I no longer receive that option.
Sent from my ADR6400L using Tapatalk
My goal is to either:
1. have the option of using skype, google voice or T mobile when initiating a call from my contacts list
or
2. be able to access and successfully choose a contact from my list when I'm on skype
At some point (I don't know why) my phone stopped giving the choice of using Skype, google voice or TMobile for an outgoing call. I would love to get that back since Skype doesn't allow me to use my phone contact list to make calls. Any ideas on how to achieve my goal?
Please tell me how to have a notification on my email when someone responds to my question.
Thanks
francabernal said:
My goal is to either:
1. have the option of using skype, google voice or T mobile when initiating a call from my contacts list
or
2. be able to access and successfully choose a contact from my list when I'm on skype
At some point (I don't know why) my phone stopped giving the choice of using Skype, google voice or TMobile for an outgoing call. I would love to get that back since Skype doesn't allow me to use my phone contact list to make calls. Any ideas on how to achieve my goal?
Please tell me how to have a notification on my email when someone responds to my question.
Thanks
Click to expand...
Click to collapse
You're in the evo4g forum no one here has tmo as the evo is a cdma phone not gsm
Same problem here since upgrading to latest Android. Did you find a solution yet?
bzzz
Did you manage to find the solution to this?
So I have been looking around here, searching (unsuccessfully) on how to setup Google Voice (GV) to use only data on 3g and wifi. I see no settings in GV or ICS for this. How do I set this up using GV to dial only data and no voice?
Can I simply go to:
Phone (stock app) >Settings > Use Internet Calling > For all calls when data is available
And then:
Google Voice (downloaded App) > Settings > Making Calls > Use Google Voice to Make all calls
Will these settings work successfully or do I need to purchase an app like Groove IP to get the result I am looking for?
I also signed up for an SIP account at sip2sip and tried to configure a SIP account in the phone, but the account wont configure properly on the phone.
Anyways I am all over the place here, some guidance from someone with more knowledge than myself would be great
Thanks!
There's a misconception that Google Voice is a VOIP service. It is not, it is simply a call forwarding service. When someone dials your GV# it simply forwards to one or more other numbers. Downloading the GV app doesn't enable or allow native VOIP calls on the phone.
The only way to get a VOIP solution going with Google Voice is to have it forward calls to Google Talk (what you'd usually do to make and receive calls in GMail), and use an app like GrooVe IP or Talkatone to intercept those and relay them to your phone.
These basic VOIP service layers for GV aren't as good as they sound. They can work quite well when configured properly on WiFi, but don't expect to make quality calls walking down the street on 3G. The codecs they use just require too much consistent bandwidth and don't work well on mobile networks.
There are other more complex SIP systems that you can pay for and have your GV# forward to, but for that I recommend you head to general and read the VOIP thread.
Sent from my Galaxy Nexus i9250
Appreciate it, will take a gander over to the voip.
I get fairly consistent 8down and 2up using tmo here so Id like to at least try!
Worst comes to worst I can put my old work sim in for service
Hi Quarkboy!
I am using T-mobile $30 plan, grooveip, google voice to do exactly what you describe. I used it this past week in both Boston and Chicago. I have a new to me used not yet unrooted HTC sensation, DL speeds I get 2mbs to 4 mbs. Calls are "clear", I don't and listeners don't hear static, but, everything sounds a little "thin" and "tinny". I plan to try talkatone next.
IMO, the sound quality is not poor enough to abandon grooveip for most calls, but, for an important call I'd probably use plan minutes.
GL!
Yes. If you want it to make all calls, just set it to that. I have used it and confirmed on my bill that it works
Sent from my ADR6425LVW using Tapatalk 2
Ive got nothing but good things to say about talkatone.
Easy setup...good options...great app!
Try itZ!
Sent from my LG-P999 using XDA
Yup. Talkatone is the way to go.
Sent from my Galaxy Nexus using Tapatalk
You don't have to set up third party programs anymore. You can just set it up though gvoice itself. I'll send screen shots when I get home. I've made two outgoing calls at the same time with it before. The other parties caller I'd shows my gv number. And. It didn't ever charge my minutes. Long story as to why I did it, but I do use gv all the time for visual voice mail. And texting.
Sent from my ADR6425LVW using Tapatalk 2
To use the native internet calling, you need to download sipdroid from the market temporarily. Through sipdroid, you can create a free account with pbxes.org with a google voice trunk (not available for free if you directly sign up at pbxes.org).
I'm about to investigate further (just got the $30 100min/5gb plan myself today), but if pbxes.org supports call forwarding if there's no active sip session (or less good, forward after x rings/seconds), you should be able to sign up for another GV/pbxes pair and use that to ring your real phone number. That way, you can have people call one number and always be reachable, and have voip preference to not eat your minutes.
It's a shame you can't do prioritized ringing natively with GV.
Yea. I downloaded Talkatone and I'm glad I did. I'm definitely going to buy the addless license after a week of use. Just have to make sure that I havent missed any problems before purchasing.
1454 said:
You don't have to set up third party programs anymore. You can just set it up though gvoice itself. I'll send screen shots when I get home. I've made two outgoing calls at the same time with it before. The other parties caller I'd shows my gv number. And. It didn't ever charge my minutes. Long story as to why I did it, but I do use gv all the time for visual voice mail. And texting.
Sent from my ADR6425LVW using Tapatalk 2
Click to expand...
Click to collapse
Also, I wondered this...
I made an accidental call using Google Voice while using my cell network (not wireless internet) and it rang! So not sure if you get charged using minutes or if its only taken from your data. I wonder if you can receive calls as well.
pinoyplaya4life said:
Yea. I downloaded Talkatone and I'm glad I did. I'm definitely going to buy the addless license after a week of use. Just have to make sure that I havent missed any problems before purchasing.
Also, I wondered this...
I made an accidental call using Google Voice while using my cell network (not wireless internet) and it rang! So not sure if you get charged using minutes or if its only taken from your data. I wonder if you can receive calls as well.
Click to expand...
Click to collapse
Yes you do get charged minutes with just gv. Use talkatone to call without minutes. Play around in the settings to get it just right. You know it's right when you can make and receive calls on airplane mode our without the Sim in the phone. Additionally, most importantly make sure to log into the desktop version of gv and forward all calls to google talk.
ziddey said:
To use the native internet calling, you need to download sipdroid from the market temporarily. Through sipdroid, you can create a free account with pbxes.org with a google voice trunk (not available for free if you directly sign up at pbxes.org).
I'm about to investigate further (just got the $30 100min/5gb plan myself today), but if pbxes.org supports call forwarding if there's no active sip session (or less good, forward after x rings/seconds), you should be able to sign up for another GV/pbxes pair and use that to ring your real phone number. That way, you can have people call one number and always be reachable, and have voip preference to not eat your minutes.
It's a shame you can't do prioritized ringing natively with GV.
Click to expand...
Click to collapse
Interesting. I just signed up and I'm trying to get it set up with the built in Internet Calling features in Android.
If I set Google Voice and Internet Calling to Ask Each Time I get this:
Call with Google Voice > Dials using Cell
Call with Cell > Asks me to chose internet or cell
So that doesn't seem to be what is expected. Although I suppose I could reduce minutes by receiving calls over gv.
Finally, does anyone know if pbxes.org keeps you logged into gtalk on their servers 24/7?
What is the best setup you found for incoming/outgoing Google Voice VOIP calls on a (Sprint) Galaxy Nexus? Interested in apps that work very well over wi-fi only, not over mobile data.
I'm looking for something that has great voice quality and also integrates seamlessly with the native dialer so that when not on wifi it makes phone calls over the cell radio and when on wi-fi it makes VOIP calls using Google Voice.
I see pbxes.org mentioned a lot. Is it worth the trouble given that they store the GV password on their server and then from what I understand they have to re-code from the GV codec to whatever codec the SIP client on the phone negotiates with the pbxes servers - I hope my understanding of how it works is correct.
Other options I've seen mentioned: Groove IP, Spare Phone, Talkatone.
Not sure which approach works best, maybe the experts here can save me some research time.
And as a SIP client, what works well? I tried the native phone SIP client with a SIP VOIP service and it sounded terrible, not sure why the native one doesn't work well.
Thanks for your help.
I use groove IP no problems
Sent from my Galaxy Nexus using xda app-developers app
Anyone else? What's your great Google Voice setup?
I use GrooveIP as well. But I really want to get my pbxes.org working on my call setting. That is what I am going to work on today.
Sent from my Galaxy Nexus using Tapatalk 2
http://forum.xda-developers.com/showthread.php?t=1684550
Sent from my Galaxy Nexus using xda premium
Soldier 2.0 said:
http://forum.xda-developers.com/showthread.php?t=1684550
Click to expand...
Click to collapse
Thanks, this is interesting but unfortunately it is too cumbersome to use by the person I'm setting up the phone for. I'd like a solution that's fully automated, use 1 dialer only (either native or a different app) that can smartly route calls via GV when on wifi (at home) or cell when not on wifi.
You can setup your PBXes account just like the tutorials (with SIPdroid) and then put the account info into the regular dialer. I think the extra steps to use the stock dialer were in a wiki somewhere or some external webpage (not on this forum).
You only need SIPdroid to create the free extension on PBXes and follow the tutorials to get all setup. Then you can go into the stock dialer and put in accountname-200, password, and then pbxes.org as the domain. You can choose to receive calls on wifi only or while on a data connection with a checkbox. I've heard that the codec used with the stock dialer isn't that great, though. It's one of those things you'd have to tryout for yourself.
One dialer to send and receive calls. It even lets you know if it's a data call or not. Maybe this is something you wanted to look into?
What SIP client pairs well with PBXes? I know the stock dialer SIP is very poor, I tried it with another SIP service and the call quality was mediocre, while their dedicated client worked very well, so at least I know it's not the phone hardware, it's the software.
I also read about potential latency issues with PBXes because they only have 1 server in NY. Is that still the case or the latency issues have been resolved? I guess in general I'm looking for a fairly reliable service though I'm prepared to accept occasional hiccups.
Almost
sirxdroid said:
What is the best setup you found for incoming/outgoing Google Voice VOIP calls on a (Sprint) Galaxy Nexus? Interested in apps that work very well over wi-fi only, not over mobile data.
I'm looking for something that has great voice quality and also integrates seamlessly with the native dialer so that when not on wifi it makes phone calls over the cell radio and when on wi-fi it makes VOIP calls using Google Voice.
I see pbxes.org mentioned a lot. Is it worth the trouble given that they store the GV password on their server and then from what I understand they have to re-code from the GV codec to whatever codec the SIP client on the phone negotiates with the pbxes servers - I hope my understanding of how it works is correct.
Other options I've seen mentioned: Groove IP, Spare Phone, Talkatone.
Not sure which approach works best, maybe the experts here can save me some research time.
And as a SIP client, what works well? I tried the native phone SIP client with a SIP VOIP servic e and it sounded terrible, not sure why the native one doesn't work well.
Thanks for your help.
Click to expand...
Click to collapse
Mr.binglejellsx2 is almost correct. I have been deal with more than 15 apps to get best. create a account by using sipdroid. make sure you have got green dot and place one out going and incoming call via sipdroid. Exit sipdroid from your phone. go to pbxes.org and login under extension under sipdroid 200 (from left) than right, under device option retype your password. (means you are get ride of sipdroid and ready for new sip). in your phone open sipdroid and make sure your got yellow and exit. in your phone call setting, add new account, your username-200 password, server is pbxes.org under option make sure your port is 5060 and not uda must be tcp. hit back and your phone should say receiving call. If not working go to pbxes.org and re type password same extension and under personal data enter your password two times where required and submit start (means, you dont want sipdroid, the second sip and now ready for any new getaway which will be your native sip) this must work. I don't see best call quality anywhere. this is awesome especially for wifi. just like your carrier. I use this everyday for international call.. let me know if don't work. If works just enjoy..
Thanks for your reply. I've been using Groove IP with very good results over wifi (that's what I care about, Sprint 3G mobile data is so bad anyway that it can't carry a call). The paid Groove IP integrates nicely with the native dialer too, so the experience is good.
sirxdroid said:
Thanks for your reply. I've been using Groove IP with very good results over wifi (that's what I care about, Sprint 3G mobile data is so bad anyway that it can't carry a call). The paid Groove IP integrates nicely with the native dialer too, so the experience is good.
Click to expand...
Click to collapse
You are very welcome. Glad that you have got the good one. Good people always have good only..