No network coverage - Touch Pro2, Tilt 2 Android Development

I have a TP2 with a T-Mobile GSM sim. Im in the UK.
Downloaded FRX04 as a rar, installed to the root of the SD card as directed and then ran Haret as directed. Android started up and runs fine, but I have no network connection at all, so cant make calls, sms, no internet connection either.
Any ideas what I should be looking for? This is my first time trying Android on my TP2

Needed to add, when I click on Bluetooth it says that its in airplane mode, but the airplane mode at the top of the settings screen is unticked.

sf49er said:
I have a TP2 with a T-Mobile GSM sim. Im in the UK.
Downloaded FRX04 as a rar, installed to the root of the SD card as directed and then ran Haret as directed. Android started up and runs fine, but I have no network connection at all, so cant make calls, sms, no internet connection either.
Any ideas what I should be looking for? This is my first time trying Android on my TP2
Click to expand...
Click to collapse
Read the FAQ. Check your force_cdma setting in the startup.txt.

It says force-cdma=1
Is this relevant for a GSM phone though?

sf49er said:
It says force-cdma=1
Is this relevant for a GSM phone though?
Click to expand...
Click to collapse
Yes, it should = 0.

Related

help to unlock XDA Exec

Following Buzz's installation instuctions I am stuck with these two items.
9. Activate Radio even without Sim in it saying something about no Sim)
15. Flash your original Radio ROM. Do not upgrade the bootloader until you restored an original radio rom.
I think I am just about there with number 15 (with the resource on this site) but can not find anything on #9.
I know a lot of people say that it is already unlocked, but it seems unlocked to a few networks.
Regards
hi, XDA Execs should be unlocked
Does it ask you to enter the unlock code if u enter another sim?
If it doesn't then it's unlocked as far as i know.
What makes you believe that it's locked to a few netwroks, maybe it's because you're trying to find a non-existent umts signal...
Turning the radio on means turning flight mode off (and for the purposes of unlocking you do that without a sim)
Hope that helps.
I take it the UMTS is another name for 3G. My BT account is a normal non 3G account. Is it a case that I need to alter some of the settings, the networks it lists are...
@VF-UK
@ O2-UK
@ Orange
Is ther anything I should try....
umm, what happens if you insert a non-o2 sim into your phone?
If it's continually searching for a signal, it might be trying to search for a dodgy 3G/UMTS signal
in which case try going to phone settings, then in the band tab , select GSM instead of auto or wcdma
In the worse case scenario, if/when you flashed the radio 0.00.00, you might have had some problem with your USB (See the unlocking thread)
Thanks for all your help.
I think I have now got to the bottom of this. The fact is that BT use the VF network. The phone logs onto this, so I guess this is normal. However the signal strength never gets above 2 bars, is this normal?
mrfirepro said:
Thanks for all your help.
I think I have now got to the bottom of this. The fact is that BT use the VF network. The phone logs onto this, so I guess this is normal. However the signal strength never gets above 2 bars, is this normal?
Click to expand...
Click to collapse
As far as i knew BT always used o2????
however....you got to upgrade you radio version after unlock is having probs.....
BR
agent003 said:
As far as i knew BT always used o2????
Click to expand...
Click to collapse
Not anymore, dude. BT sold BT Cellnet (now O2 plc) a little while ago, but now they have started their own mobile service again (called BT Mobile) BUT piggybacking Vodafone's network.

No service

I have HTC pro2 sprint. I can boot up the android, but get no service, wifi does not work either....Am I doing something wrong? Any suggestions for fix?
Welcome to the forums. I suggest you read the faq. http://sites.google.com/site/androidport/faq
For the wifi you should search the forum because it has been aswered a lot of times.
http://forum.xda-developers.com/search.php?searchid=38801149
Make sure you Force CDMA mode, and remove the Sprint SIM card or any other SIM card before you boot into Android
You may want to make sure you aren't on roaming only mode too, sometimes that can cause a signal fail (it did for me).
I have the same no service problem cdma sprint tp2..in winmo phone settings I changed mode off operation to cdma only..also in the startup.txt I have "force_cdma=1" without quotations of course..still in android when I go to to wireless and networks airplane mode is automatically checked and when clicked will not uncheck itself..suggestions?
edit: I figured out..the sprint tp2 has a sim card, wtf! lol I pulled it out and got signal..
The froyo v3 version doesn't need the sim card removed to work and it is faster wifi and data also works
Sent from my MSM using XDA App

[Q] Why Does my Korean N7100 think I'm roaming and not connect to mobile internet?

I bought my n7100 on taobao here in China, and it's a Korean version. I put my China Mobile sim card in, and it makes and receives calls, and text messages and can use wifi with no problem.
The only thing is the mobile data doesn't work. I rooted and tried tweakker, and HiNet, to reset my APN and MMS settings, but that didn't work. My phone still thinks I'm roaming.. it displays
this message "Data Roaming, You have lost data connectivity because you let your home network with data roaming turned off".
I've also tried updating the APN and MMS settings manualy with information i've found on the web.
I've googled and searched this forum and I can't find much. I thought it would be an easy APN settings fix but it seems not to be...
I took my phone in to the local China Mobile store they couldn't fix it. I took it to a local android expert here and they didn't know what to do.
Any ideas would be greatly appreciated.
If you bought a Korean Note 2, you don't (shouldn't) have an N7100. I also purchased one through Taobao.
You should have an SHV-E250S, E250L, or E250K. Which one do you have? Check the baseband version under Settings > About device page.
No matter what, you're going to be limited to 2G only with China Mobile.
You're right, It's SHV-E250S, and I'm fine using the 2g in China on China mobile, but I'd just like to know how..any help?
Baseband Version is E-250SKSVLJK
Try removing all modifications to your APN settings.
Next, go into Settings > More settings > Mobile networks > Network mode and change it to GSM only. Also make sure that Data roaming is not selected. Run a new scan for network operators while you're in there to refresh your APN settings to the right ones.
In data network mode I only have 2 options "3g only" or "LTE Preferred" I have it on 3g only. I have now unchecked data roaming, but I don't see any place to scan for network operators. I have included a few screenshots here, sorry i don't know how to insert them.. http://tinypic.com/r/2198djn/6 http://tinypic.com/r/24dhfmx/6 http://tinypic.com/r/2zof98w/6
Now it's obvious why you don't have data. Is this the stock Korean ROM? Are you rooted?
I can point you to a decent ROM that will fix all of this, provided you have the patience to fix it. It's relatively easy.
Yes it seems to be the stock Korean ROM. I am rooted using http://forum.xda-developers.com/showpost.php?p=31801060&postcount=2 I'm more than willing to flash another rom. I've put about 20 hours into this so far, I imagine I can muster enough patience to finish it
Once they give us a damn Korean Note II section, this kind of information will be a lot easier to find.
Try this ROM for now, it's the one I've been using for a few weeks and I love it.
Link source: http://koxda.com/thread-98683-1-1.html
ROM Download: http://pan.baidu.com/share/link?shareid=149494&uk=3355956772
Password: koxda.com
Thanks a lot the rom (715mb) is downloading now, I have tried to flash ROM's on my old galaxy nexus, and on this note II, but I never succeeded, can you please link me to a good guide, on how to flash this rom? thanks.
Odin is included in the download. If you're using Windows 7 you may or may not have the drivers for the phone, and can grab them out of the All-in-one Toolkit. Just installing the toolkit should install the drivers necessary.
http://forum.xda-developers.com/showthread.php?t=1923956
The ROM you're downloading has two files and two pictures, as well. Open the pictures and follow along. All you have to do is click two buttons, select two files, then hit start. It WILL wipe your phone.
I installed that rom you suggested, I went into settings and did GSM only, and had it automatically find my network (china mobile) selected it, rebooted, and still it says i'm roaming so there is no connectivity... any more ideas?
Can you try somebody else's SIM?
There's no reason you should not be getting service unless something is not right with your SIM or phone.
I installed the rom you suggested, i went into settings and made it GSM only, also had it automatically correctly locate my network (china mobile) and it said "registered on network".. but it still isn't working, same problem, it says no connectivity cus i'm roaming.. any ideas now?
my gf will be home from work in a couple hours, I can try her sim card then.. my sim card was cut by me for my old iPhone.. is it possible or likely that the phone can still make and receive calls, but that somehow data connectivity was affected by me cutting the card? also one guy at the phone fixing store tried his sim card (from another company) and internet worked fine he said..
dadroidda said:
I installed the rom you suggested, i went into settings and made it GSM only, also had it automatically correctly locate my network (china mobile) and it said "registered on network".. but it still isn't working, same problem, it says no connectivity cus i'm roaming.. any ideas now?
Click to expand...
Click to collapse
China mobile have various sim plans, from local to province to national. Are you using the sim in the same city in which you bought it? If not and you don't have a national plan, it could be why the phone is showing roaming. In China going from one province to another is already considered roaming unless you have a national plan. This is from my experience back 2 years ago. Also, you best check at a China mobile shop if you have data activated, gprs/edge is not activated by default, you need to ask them to do it.
I would advise you to switch to China unicom as they have 3g/hspa which is much faster than china mobile.
Sent from my GT-N7105 using xda premium
For clarfication, I am in Hainan, and the card is from hainan. I use the same sim card in my galaxy nexus without any problem. I tried my gf's card just now, it didn't say any problem with connectivity, and did not display roaming.. And it shows the G symbol (for 2 or 3 G I assume), and has up and down arrows next to it.. but it doesn't actually work for browsing the web or using apps over the data network.. I even reset all the APN settings and let it automatically find the China Mobile network, but it didn't help.. what if I try to set the APN settings manualy? and any other ideas??
Showing the G symbol is GPRS, which is 2G. You will not get 3G on the N7100, N7105, or Korean model Note 2 on China Mobile.
Sounds like you need a new SIM card. You can try to set the APN manually to make the data work with hers. I've never had to set an APN manually and I've used many phones here with all 3 carriers, so it's a bit odd to me. No clue why your card doesn't work, but since hers is working fine, it's definitely not your phone.
For the record, her card displayed G, but even after messing with settings, I couldn't get it to have working data network..
Today I bought a new card, and had it officially cut to size, put it in the note II and it's still telling me no data connectivity due to i'm roaming.. i'm so frustrated
edit: after restarting a few times and trying to automatically make it register on china mobile .. it worked on the 4th attempt.. it still displays data roaming, and I had to enable data roaming... but now it works, even though it says i'm roaming?? wtf
Ive the same problem with my Korean galaxy note 2 all voice service work perfect but when I tried to turn on data it says insert Usim Card to access network please help

No network issue after repair

Hi there,
I recently sent my phone back to HTC because my volume button was stuck, which resulted in it not being able to boot (as it always went straight to recovery). They repaired it, and after three weeks without my phone I know received it back. They 'replaced parts and did a software update.'
Problem is, now I have no mobile network connection. The phone recognises the SIM fine, but no signal and search networks results in "Error while searching for networks."
I'm blaming the software update HTC did, so I send them another email. The thing is, I don't want to send it back AGAIN, I had the phone a full 2 weeks before it broke and haven't been able to use it since. Is there anything you guys can think of that doesn't involve rooting it and losing my warranty (which I will probably need now)?
Thanks a bunch
Hello,
have you tried to switch between the network mode; only WCDMA or only GSM? (Settings->Mobile Network->Network Mode)
Pundy said:
Hello,
have you tried to switch between the network mode; only WCDMA or only GSM? (Settings->Mobile Network->Network Mode)
Click to expand...
Click to collapse
Thanks for the reply. Yes I have, no effect. One other weird thing I have noticed since first posting: at the about -> Phone Identity screen, the phone number does not match my actual sim phone number. It reads the SIM fine though, as all my SIM contacts are available.
Could you use/try another SIM Card to check its work with a different one?
Is WiFi working? Any interruptions druing a regular call?
Pundy said:
Could you use/try another SIM Card to check its work with a different one?
Is WiFi working? Any interruptions druing a regular call?
Click to expand...
Click to collapse
Regular call is impossible, as I have no cellular network at all. Wifi works fine. I am currently unable to try another SIM, as I'd have to cut a microsim out of a regular one and people around don't want to have their card cut up.
The sim works fine in my old nokia though, so I don't think that's the issue.
I'll try to find a friend with an iPhone 4 to try their microsim, but I'm not really counting on it.

Help 4g

Hello friend, i bought a new m9 and when i activate data mobile i have only 3g , i tryed factory reset, to setup my network,
I rooted my phone, installed custom room.. still no change.. anyone can know why ?
Well maybe you dont have great 4g signal in your area? Or change apn.
StyL3sX said:
Hello friend, i bought a new m9 and when i activate data mobile i have only 3g , i tryed factory reset, to setup my network,
I rooted my phone, installed custom room.. still no change.. anyone can know why ?
Click to expand...
Click to collapse
As stated already , the signal could be weak in your area. Type in the dialer key pad ##3282# and you can also look to make sure all the bands are enabled on your device. I don't see why they wouldn't be though. A handful of users have stated bad connectivity with the M9, but that's on the sprint network I have been reading about.
at ##3282# it say only OK.. nothing about enable bands and i tryed sim of my friend (vodafone 4g) he have m8 and 4g working... on my m9 doesnt..
StyL3sX said:
at ##3282# it say only OK.. nothing about enable bands and i tryed sim of my friend (vodafone 4g) he have m8 and 4g working... on my m9 doesnt..
Click to expand...
Click to collapse
I have same problem with my M9+. In Manchester Area UK
I had perfect 4G with my old M8 but with new phone only 3G!!
Let me know if you get any answers. HTC and Vodafone couldnt help me either.
Check access point names, make sure only one is listed and selected.
Go to networks and search for network, click automatic.
Open the connectivity selection and make sure that the scalable option is chosen (2g/3g/4g)
Are you using one Base with the wrong firmware? Make sure they match up.
Find a friend on the same network or shared network and see if they have 4g in your location.
Test the sim in another phone.
Call network to check for issues in your area and or if there is an error against your account, may need a new sim if that one is old.
Test in major parts of the city center next time you're shopping..
Perform a speed test to see what speed you're actually getting, hspa is up to 20mb, 4g AFAIK is around 60mb, I've had 48 before. Anything over 20 could be considered 4g, you will very very rarely see a 3G tariff go over 19mb, which is the most I've ever seen.
Good luck.
StyL3sX said:
Hello friend, i bought a new m9 and when i activate data mobile i have only 3g , i tryed factory reset, to setup my network,
I rooted my phone, installed custom room.. still no change.. anyone can know why ?
Click to expand...
Click to collapse
I have the same issue with the M9. Couldn't find an answer for this problem. Even tried opening lte bands as listed here but no luck.
The thing is that I used to get LTE where I am now, went on long holiday and can't get it to work again so no idea what's up.
Jhonys said:
I have the same issue with the M9. Couldn't find an answer for this problem. Even tried opening lte bands as listed here but no luck.
The thing is that I used to get LTE where I am now, went on long holiday and can't get it to work again so no idea what's up.
Click to expand...
Click to collapse
That's a network issue, get a new sim and speak with your provider. Try the things I listed too
dladz said:
That's a network issue, get a new sim and speak with your provider. Try the things I listed too
Click to expand...
Click to collapse
I tried my sim with my wife's iphone and i got 4g without any problem. It's not a sim issue. Whatever the problem is, it's with the device (hardware, software, settings). I remember it also took me a few weeks after getting the M9 to get a 4g signal, but then one day it just appeared so there's that to add to the mystery.
Jhonys said:
I tried my sim with my wife's iphone and i got 4g without any problem. It's not a sim issue. Whatever the problem is, it's with the device (hardware, software, settings). I remember it also took me a few weeks after getting the M9 to get a 4g signal, but then one day it just appeared so there's that to add to the mystery.
Click to expand...
Click to collapse
Reset your network settings mate, set to manual then back to automatic.
Make sure you actually catch the network on manual first before manual. You will find it, it's just a case of going through the motions.
Also click menu, reset to defaults in access point names.
dladz said:
Reset your network settings mate, set to manual then back to automatic.
Make sure you actually catch the network on manual first before manual. You will find it, it's just a case of going through the motions.
Also click menu, reset to defaults in access point names.
Click to expand...
Click to collapse
1. How do you "reset network settings"?
2. set to manual - you mean in 'Network operators' menu select 'Search networks', select my network, then go back and selecting 'Select automatically'?
3. What do you mean "just a case of going through the motions"?
4. Should I reset APN at the last step or at the beginning?
I'm trying to understand your steps as clearly as i possible can because this no 4g issue took a lot of time and effort from me and it still doesn't work. Any help is very much appreciated.
Jhonys said:
1. How do you "reset network settings"?
2. set to manual - you mean in 'Network operators' menu select 'Search networks', select my network, then go back and selecting 'Select automatically'?
3. What do you mean "just a case of going through the motions"?
4. Should I reset APN at the last step or at the beginning?
I'm trying to understand your steps as clearly as i possible can because this no 4g issue took a lot of time and effort from me and it still doesn't work. Any help is very much appreciated.
Click to expand...
Click to collapse
I am trying to help you.
There are no steps it's just a case of trying everything to do with the network. If what you say is true and you've literally just had this issue occur out of the blue then it has to be a difference on the handset, especially seeing as you have tested the sim in another phone and it works.
Reset to default is with apn, doesn't matter when you do this just reset them, make sure it's checked and cycle mobile data on and off.
Clarify that your device is set to 2g/3g/4g within network mode (I believe it's called)
And I was referring to setting network selection to manual within mobile network settings, then choosing your network, then researching and selecting automatic.
The path is: settings / mobile data / network operators / search networks, wait for yours and select it, cycle mobile data (turn off then back on) if that doesn't work, switch back to automatic.
Reboot your phone after making changes, perform the full shut down method instead of the restart or power off methods, it's power and volume up AFAIK, hold for 10+ seconds, might be 15.
Going through the motions refers to checking anything and everything which influences the network, one of these setting will get it working..
Might be seen as overkill but a factory reset (if it's not been tried already) good luck.
dladz said:
I am trying to help you.
There are no steps it's just a case of trying everything to do with the network. If what you say is true and you've literally just had this issue occur out of the blue then it has to be a difference on the handset, especially seeing as you have tested the sim in another phone and it works.
Reset to default is with apn, doesn't matter when you do this just reset them, make sure it's checked and cycle mobile data on and off.
Clarify that your device is set to 2g/3g/4g within network mode (I believe it's called)
And I was referring to setting network selection to manual within mobile network settings, then choosing your network, then researching and selecting automatic.
The path is: settings / mobile data / network operators / search networks, wait for yours and select it, cycle mobile data (turn off then back on) if that doesn't work, switch back to automatic.
Reboot your phone after making changes, perform the full shut down method instead of the restart or power off methods, it's power and volume up AFAIK, hold for 10+ seconds, might be 15.
Going through the motions refers to checking anything and everything which influences the network, one of these setting will get it working..
Might be seen as overkill but a factory reset (if it's not been tried already) good luck.
Click to expand...
Click to collapse
I know you are trying to help me, and I very much appreciate it. Truly am.
I tried doing all the steps you listed, but no luck. Even tried at some point to force lte only in 4636 screen but that resulted in no signal at all. Trying to manually select a network in that setting only gives me the other 2 networks that work in the area but not vodafone which is what I use.
As a complete overkill I RUU earlier to the new 2.11.617 firmware without signing into my google account or restoring anything, and still no lte. What I did saw however, in the select network screen, was that next to my network, it said 2g/3g and next to the other 2 networks here it said 2g/3g/4g. Obliviously I can't select them as it's a vodafone simcard.
I added here SS from LTE discovery app while i was on 'lte only' mode. You can see signal is there but it cannot connect.
Any wild ideas or suggestions? I'm opened to try almost anything
Just out of interest, have you tried a different sim card? I know you said that your sim worked in another phone but I'd still be tempted to contact voda to get a new sim and to see if everything is set up on a network level, you may have to tell via that the issue is persistent in different phones or they may make you pay for it.
Also, might be something to do with the association between your phone and your sim. I once had a sim that blocked my missus, she could call me but I couldn't call her, no active diverts of any kind, I could call anyone and they could call me, got a new sim and it was sorted. Very strange, but anomalies like this do occur.
Have you got any mods or are you at stock at the moment? I know you said ruu. Oh and lol click thanks BTW.
dladz said:
Just out of interest, have you tried a different sim card? I know you said that your sim worked in another phone but I'd still be tempted to contact voda to get a new sim and to see if everything is set up on a network level, you may have to tell via that the issue is persistent in different phones or they may make you pay for it.
Also, might be something to do with the association between your phone and your sim. I once had a sim that blocked my missus, she could call me but I couldn't call her, no active diverts of any kind, I could call anyone and they could call me, got a new sim and it was sorted. Very strange, but anomalies like this do occur.
Have you got any mods or are you at stock at the moment? I know you said ruu. Oh and lol click thanks BTW.
Click to expand...
Click to collapse
Well the thing is that my wife's sim card in my phone only gets 3g. On her iPhone it's 4g. My sim card in my wife's iPhone gets 4g. On my phone only 3g so it seems like a very specific problem with my device.
Shortly after ruu I installed viper 3.5 without any mods..
Can it be that my device is somehow blocked by the network towers or something of that nature?
Maybe a hidden setting somewhere that blocking the phone's 4g capabilities? This is getting ridiculous..
Thanks for your help mate. Can't believe I forgot to press the thanks button [emoji2]
Sent from my HTC One M9 using Tapatalk
Jhonys said:
Well the thing is that my wife's sim card in my phone only gets 3g. On her iPhone it's 4g. My sim card in my wife's iPhone gets 4g. On my phone only 3g so it seems like a very specific problem with my device.
Shortly after ruu I installed viper 3.5 without any mods..
Can it be that my device is somehow blocked by the network towers or something of that nature?
Maybe a hidden setting somewhere that blocking the phone's 4g capabilities? This is getting ridiculous..
Thanks for your help mate. Can't believe I forgot to press the thanks button [emoji2]
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
No worries fella
If you've already tried another sim and it's still not happening, the firmware matches the rom, your sim works in other phones with 4g. Then I'm really not sure mate..
Give Lee droid a whirl that's what I'm using at the moment.. A simple but great rom..
I'm pretty much out of ideas now, if all of the above has been checked then it's something that I'm not aware of.. Sorry mate..
for the record it is a weird one, something should have got it working by now..
---------- Post added at 12:58 AM ---------- Previous post was at 12:56 AM ----------
Are you in a position to be able to return the device? Just in case
dladz said:
No worries fella
If you've already tried another sim and it's still not happening, the firmware matches the rom, your sim works in other phones with 4g. Then I'm really not sure mate..
Give Lee droid a whirl that's what I'm using at the moment.. A simple but great rom..
I'm pretty much out of ideas now, if all of the above has been checked then it's something that I'm not aware of.. Sorry mate..
for the record it is a weird one, something should have got it working by now..
---------- Post added at 12:58 AM ---------- Previous post was at 12:56 AM ----------
Are you in a position to be able to return the device? Just in case
Click to expand...
Click to collapse
Thanks for the help mate.
I can't return the device as it was bought in the states and I live in Europe at the moment.
I think I will try to change my sim card for a new one just in case, and will change back to stock 2.11.617 for a couple of days to see if that can make any difference.
Will post an update if i will have one.
Jhonys said:
Thanks for the help mate.
I can't return the device as it was bought in the states and I live in Europe at the moment.
I think I will try to change my sim card for a new one just in case, and will change back to stock 2.11.617 for a couple of days to see if that can make any difference.
Will post an update if i will have one.
Click to expand...
Click to collapse
Good luck fella, hope it all works out for you. With it being bought in the states would the band frequency of the device make a difference? Just spitballing there. Good luck..
dladz said:
Good luck fella, hope it all works out for you. With it being bought in the states would the band frequency of the device make a difference? Just spitballing there. Good luck..
Click to expand...
Click to collapse
Yes it would. He probably bought a cdma and has to have the correct bandwidths unlocked.
Sent from a stolen (and crap) HTC M9
shivadow said:
Yes it would. He probably bought a cdma and has to have the correct bandwidths unlocked.
Sent from a stolen (and crap) HTC M9
Click to expand...
Click to collapse
Then that would make sense.

Categories

Resources