Develop Bugs

[MOD] EZ Clockwork 2.5.1.2 Install>Easily flash to 2.5.1.2 to flash old mods/themes

[MOD] EZ Clockwork 2.5.1.2 Install>Easily flash to 2.5.1.2 to flash old mods/themes
THIS IS FOR THE MT4G/Glacier UPDATED 04/22/2011
The primary use for this mod is to be able to easily switch between CWM Recovery 3.0.2.4, 3.0.0.6, 2.5.1.2 and the MT4G/Glaciers stock recovery.(Thanks to Amac1222 for the idea of adding the stock recovery to this)
In order to flash a rom or mod you must be rooted and running a recovery other than stock. With this zip, you can install CWM 2.5.1.2 so that some of the older scripted mods/themes will work. This zip also still includes CWM 3.0.0.6 and the stock recovery for anyone that wants to run those recoveries for some reason.
Using this Mod/Method you can switch between the latest version of CwM 3.0.2.4, 3.0.0.6, 2.5.1.2 or the stock recovery with the push of a couple buttons(you cant flash things from the stock recovery).
This zip does not modify Rom Manager in any way but only places the both CwM v3.0.0.6, v2.5.1.2 and the stock 2.2.1 recovery image in the correct spot on your sd card and renames it in order for it to be flashed using Rom Manager.
Instructions for use
Make sure you have the newest Rom Manager installed. This is included in most roms but can be found in the market also. The free version works fine..
Download the zip at the bottom of this post and place it on your sd card.
Open Rom Manager and choose "Reboot into Recovery"
From recovery flash/install the zip file you placed on your sdcard.(If you downloaded straight to your phone you will need to go into the download folder first and then) choose "Recovery_2.5.1.2_to_RomManager.zip" and install it. No need to wipe anything.
Now reboot your phone and then go back into Rom Manager and go to "All ClockworkMod Recoveries" This is where you flash the recoveries from.
To flash CwM 2.5.1.2 recovery just choose the option for 2.5.1.4
To flash CwM 3.0.0.6 recovery just choose the option for 3.0.0.5
To flash the stock recovery just choose the option for 2.5.1.3
Rom Manger will not show the correct matching "Current Recovery #" after using this. ie: It will say 2.5.1.4 in Rom Manager but if you boot into recovery it should be 2.5.1.2
You can now boot into recovery. (If you chose the 2.5.1.3 option hold volume up and power button at same from the red triangle screen to enter the stock recovery)
You should now see the new recovery.
CWM 2.5.1.2 Recovery has GREEN text
CWM 3.0.0.6 Recovery has ORANGE text
Stock Recovery has BLUE text
Keep in mind that you can switch recoveries easily in order to do things like flash that quick mod that has a old script. Just dont forget to flash back to the correct recovery when you try to flash a rom again.
Please hit the "THANKS" button if you are using this and want to show your gratitude.
[DOWNLOAD HERE]
MY OTHER THREADS​
MT4G BUTTON MODS___ EZ ADB/FASTBOOT SETUP ___GENIUS BUTTON FOR CM7​

Thanks for staying so on top of keeping this updated Drew! This is definitely the most user-friendly and accessible method for the newbies. You should email the developer of ROM manager to see if they can build in an option for Clockwork 3.

This is exactly what I was going to ask CM7 thread. Die looking for the stock recovery to re-calibrate my battery. BIG THANKS!!!

Phateless said:
Thanks for staying so on top of keeping this updated Drew! This is definitely the most user-friendly and accessible method for the newbies. You should email the developer of ROM manager to see if they can build in an option for Clockwork 3.
Click to expand...
Click to collapse
I dont think it will be added into Rom Manager anytime soon but I could be wrong. Our phone is one of only 4 or 5 phones that require a different recovery to run Gingerbread so most phones dont have this issue. Until most all of the roms require 3.0.0.5 type of recovery to flash, I just dont see it happening. I think Koush is far to busy with other things right now.

Awesome work, Drew, downloading now. I had just received my millionth MT4G replacement (yes, I am searching for the highly elusive perfect MT4G), and was attempting to get it set up for CM7 over the weekend, and although I had used your method before and was able to get it working, this time it wouldn't work, and I finally got it working through procedure 3 on the other thread, I believe, by Phateless. Hitting the thanks button now, and I appreciate your keeping on top of things. Cheers =)

I appreciate the thanks and I'm glad its working again. I just found out the other one had stopped working last night and I couldnt edit the post with the fix since the thread it was in had been closed. At least now if we run into any more issues everyone has a place to post and let me know.
Good luck finding the MT4G for you. I got lucky, mine is as close to flawless as I think I can get. Good screen, can OC to max with no probs. My back button does creek sometimes ever so slightly but I do push it like 20 times more than any other button so I can live with that.
Thanks again for using this mod!!
m00nshake said:
Awesome work, Drew, downloading now. I had just received my millionth MT4G replacement (yes, I am searching for the highly elusive perfect MT4G), and was attempting to get it set up for CM7 over the weekend, and although I had used your method before and was able to get it working, this time it wouldn't work, and I finally got it working through procedure 3 on the other thread, I believe, by Phateless. Hitting the thanks button now, and I appreciate your keeping on top of things. Cheers =)
Click to expand...
Click to collapse

The download link seems to be broken
Sent from my HTC Glacier using XDA App

acureto said:
Will we need to do this method every time we change roms?
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
You only would need to change the recovery if you want to flash a rom that isnt compatable with the recovery that you are currantly running,
For example if you are running a rom like Ice Glacier and Clockwork recovery 2.5.1.2 and you want to install CM7. You cant do it without flashing ClockworkMod 3.0.0.5 first. Same thing if you are running CM7 and Clockwork recovery 3.0.0.5 and want to install a Froyo Rom you must flash back to 2.5.1.2 before installing the rom.
You can do both of those things from Rom Manager by following the instructions in the first post.
Once you have installed the zip you should not have to install it again. It places the recovery images on your SD card so they shouldnt get erased when you flash a different rom.

just kidding on the download link being broken, awesome job it works great!

acureto said:
The download link seems to be broken
Sent from my HTC Glacier using XDA App
Click to expand...
Click to collapse
Link wasnt broken but Mediafire doesnt play nice if your downloading str8 to your Phone. I replaced the link with a different one so try it now.

Thank you so so so muccch!!!! It worked like a charm. But wow to think I was putting up with ice glacier cuz the process of going to cwm3 just seemed so inconvenient, boy did you make things easy.
And wow cm7 is the ishhh. I can't believe how smooth and fast everything is. And its like customization galore. Again thank you so much.
Sent from my HTC Glacier using XDA App

Great idea putting the stock recovery also - thanks. That makes it much easier to deal with if there is a need to convert back to stock to return a phone under warranty.
I could not see how I had gotten the ROM Manager update however, as I had never seen it coming through a market update. Then I recalled it comes with the newer Builds, so apparently the new Manager one is in them now.
Update - Installed this on another MT4G I got for a Family Plan member ($49.95 with two year extension). I had it flash CMW 2.xxx, went into recovery (green), and then booted back up. Open modified ROM manager, flashed back to "2,5.1.1" and booted back into recovery.
Got the (usually) dreaded red triangle, and then vol up/power button - and there was the old stock recovery in all its blue glory!
Going to leave it that way for now unless I need to flash some more zip files before I ship it off (recipient is 2600 miles away). I don't want to have to deal with the boot-up to recovery when connecting to the charger when device is off issue.
Again - great work

gaww said:
Got the (usually) dreaded red triangle, and then vol up/power button - and there was the old stock recovery in all its blue glory!
Click to expand...
Click to collapse
TrueBlue - I think this note might be useful to add to your guide. As a noob to all of this i didn't know you need to press VOLUME UP and then POWER in order to get into stock recovery the first time i did it. It scared the crap out of me and i thought i bricked my phone!
So it might be helpful for people who are doing it for the first time to know that the phone and hazard sign are expected.

shortskoolbus said:
TrueBlue - I think this note might be useful to add to your guide. As a noob to all of this i didn't know you need to press VOLUME UP and then POWER in order to get into stock recovery the first time i did it. It scared the crap out of me and i thought i bricked my phone!
So it might be helpful for people who are doing it for the first time to know that the phone and hazard sign are expected.
Click to expand...
Click to collapse
Actually it is in the OP right where I tell you to boot into recovery. You must have missed it. Maybe I will make it bold print.

TrueBlue_Drew said:
Actually it is in the OP right where I tell you to boot into recovery. You must have missed it. Maybe I will make it bold print.
Click to expand...
Click to collapse
Yes, sorry you are correct! Bold would be nice for people who can't read like me

Thanks for the help, and great work man.

Drew, THANKS A LOT.
Question: When you flash a new ROM, do you have to reflash the recovery ZIP?

Jaskwith said:
Drew, THANKS A LOT.
Question: When you flash a new ROM, do you have to reflash the recovery ZIP?
Click to expand...
Click to collapse
No, you do not need to reflash this everytime you flash a rom. You should only need to flash it once.

Jaskwith said:
Drew, THANKS A LOT.
Question: When you flash a new ROM, do you have to reflash the recovery ZIP?
Click to expand...
Click to collapse
TrueBlue_Drew said:
No, you do not need to reflash this everytime you flash a rom. You should only need to flash it once.
Click to expand...
Click to collapse
As long as you stay on a Gingerbread ROM you don't need to reflash recovery. If you go back to a Froyo ROM then you need to reflash Clockwork Recovery 2.5.1.2, which can be done through ROM Manager.

Phateless said:
As long as you stay on a Gingerbread ROM you don't need to reflash recovery. If you go back to a Froyo ROM then you need to reflash Clockwork Recovery 2.5.1.2, which can be done through ROM Manager.
Click to expand...
Click to collapse
He asked if he needed to flash the recovery ZIP when he flashes a new rom.The answer to his question is NO. He did not ask if he needs to flash a new recovery. If he wants to flash a different rom then, yes he needs to make sure he is using the correct recovery for the Rom he is flashing.

please help - clockworkmod backup rom problem

ok so, i just rooted my phone and that went fine. did it with the stock rom, but after I did that I installed clockwork mod. well, i tried to do a back up of the current rom and when it rebooted it crashed. now it comes up to the android system recovery screen but it won't let me select anything...... can anyone help?!?!?

i am freaking out here... did i brick my phone?!?!?! anyone????

I don't know why you're having a problem or what caused it but you certainly didn't brick your phone. You can always flash a new ROM in clockwork or use odin to flash the stock .tar.
edit: missed the part about not being able to select anything in recovery. All is not lost, just flash the stock EG31 .tar with odin and you'll be fine. You're gonna have to reroot and set everything back up again (I've done it twice today) but at least you will still have a phone. Try just flashing the kernel first, maybe you can get it to boot without losing anything.

everytime i reboot the phone it just comes back to this android system recovery screen. it's blule, at the bottom is says manual mode. and something sucsessfull but, it won't let me selelect any of the options and it keeps booting to this screen... where can i download odin? i keep seeing stuff about that, i guess i need to flash to a rom or something....
edit: cool, yeah.. can you show me where to download what your talking about??
thank you!!

get odin here- http://forum.xda-developers.com/showthread.php?t=1274337
stock tar here- http://forum.xda-developers.com/showthread.php?t=1351761
Read the guides if you aren't familiar with using odin. Good luck.

Thanks A lot man!

ogeretla said:
Thanks A lot man!
Click to expand...
Click to collapse
Yeah, that sounds like stock recovery. Follow above steps and you should be good
Sent from my SPH-D710 using xda premium

Got it fixed. Thanks guys!
Sent from my Epic 4G Touch

[Q] CWM Online Builder

Has anybody managed to get a working CWM Touch built using the CWM Recovery Builder? I've tried a few times but can't seem to get anything working.
I was thinking that it was something to do with recovery.fstab, but so far, it just seems like the regular stock recovery *SIGH* Guess I'll keep at it later during the week.

masr1979 said:
Has anybody managed to get a working CWM Touch built using the CWM Recovery Builder? I've tried a few times but can't seem to get anything working.
I was thinking that it was something to do with recovery.fstab, but so far, it just seems like the regular stock recovery *SIGH* Guess I'll keep at it later during the week.
Click to expand...
Click to collapse
Well, what happens when you try it? Does it boot into recovery or fail before that point? Or does it work but just no touch? And last...twrp works fine and has touch.
I'll give it a shot tomorrow sometime and see what's up, though zeronull would probably be the guy to contact about a100 recoveries.
Tapatalked from my Galaxy S II.

I'm more of a fan of CWM than TWRP, though I've been using the later for quite a few months. Mostly though it's that itch to mess around with stuff
As far as what was happening, it booted into recovery and after a few secs would show the android with the red warning sign (I'm assuming since it couldn't find the update.zip in the sdcard).
I had considered asking zeronull, yourself, or waydownsouth for some advice, but I figure you guys are doing plenty as it is. As I said, it's not a necessity or anything.
I'll keep at it, when I have some time.

masr1979 said:
I'm more of a fan of CWM than TWRP, though I've been using the later for quite a few months. Mostly though it's that itch to mess around with stuff
As far as what was happening, it booted into recovery and after a few secs would show the android with the red warning sign (I'm assuming since it couldn't find the update.zip in the sdcard).
I had considered asking zeronull, yourself, or waydownsouth for some advice, but I figure you guys are doing plenty as it is. As I said, it's not a necessity or anything.
I'll keep at it, when I have some time.
Click to expand...
Click to collapse
Well zeronull or WDS would be the ones to ask about this kind of stuff, its beyond me really I'm just a script guy. Although are you flashing the recovery to test, or booting recovery off the PC over USB? While you can do it, I recall cwm corrupting sometimes. Not sure if these devices are prone to it or not. Like I said if I get some time I'll mess around and see what I can see.
My most time consuming project hit a wall until I can get ahold of a bricked a100, so I have a little extra time atm.
Tapatalked from my Galaxy S II.
Edit: So I made a working CWM Touch Recovery. At least, it works like it flashes ok, boots fine, and touch works. Didn't test it past that. I even wound up flashing it over boot, so I could only boot into recovery. That was fun. So, if anyone asks, you can flash recovery to boot, and you will always boot into recovery. Win.

I managed to build a CWM Touch Recovery from the CWM 5.5.0.4 Recovery. I was able to wipe, flash.
Flash this only if you already have a working Recovery such as the CWM 5.5.0.4 or TWRP Recovery (meaning you already have ICS firmware installed).
Please test this with caution since I haven't tested all functions.
Download links
CWM Touch Recovery
CWM 5.5.0.4 - if you want to restore to CWM 5.5.0.4
Big thanks to Koush for the Online Recovery Builder

[email protected] said:
I managed to build a CWM Touch Recovery from the CWM 5.5.0.4 Recovery. I was able to wipe, flash.
Flash this only if you already have a working Recovery such as the CWM 5.5.0.4 or TWRP Recovery (meaning you already have ICS firmware installed).
Please test this with caution since I haven't tested all functions.
Download links
CWM Touch Recovery
CWM 5.5.0.4 - if you want to restore to CWM 5.5.0.4
Big thanks to Koush for the Online Recovery Builder
Click to expand...
Click to collapse
Nice. I did it earlier lol I was gonna put it up but xda has been all screwed up most of the day so I can't even reply to posts. I sent him a pm with a link a few hours ago.
For those wondering you can flash it with fast boot.
adb reboot bootloader
once at bootloader
fastboot flash recovery recovery.img
fastboot reboot
This assumes recovery.img is where adb and fast boot are run from otherwise add the folder where it is.
Tapatalked from my Galaxy S II.

pio_masaki said:
...So, if anyone asks, you can flash recovery to boot, and you will always boot into recovery. Win.
Click to expand...
Click to collapse
LOL! there you go, you learn something new everyday
Thanks to both of you for your time.

problem flashing clockwork mod t999....only Android system recovery opens

Hey, if anyhow could help that would be great. I followed ask the instructions to flash Clockwork mod on my t999. Odin recognized phone, i pda'd clockworkmod.tar file, it passed and rebooted. Then i held power up+home+power and entered Android system recovery. Have done a few times and i continue to get Android system recovery. Obviously my phone isn't rooted yet, just got it. Is there an alternate way to get clockwork mod or am i doing something wrong? Thank you, any help is much appreciated...
Jake

U need root to flash clockwork
Sent from my SGH-T999 using xda app-developers app

tructo said:
U need root to flash clockwork
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
but when i read the instructions on rooting the phone it says must install clockworkmod first through Odin. You know what, ill look over it again, thanks for your quick reply..Jake

tructo said:
U need root to flash clockwork
Sent from my SGH-T999 using xda app-developers app
Click to expand...
Click to collapse
Ok, i just read the instructions again and it won't be possible to get past step 3 then
1. Copy cwm_superuserv3.0.7.zip
2.power off the phone
3. Bout your phone into clockworkmod
So if you know a way i can root my phone without being clockworkmod, can you paste a link? Because it's telling me i need clockworkmod to root phone....thanks again

Check out MrRobinsons thread in development. Very easy!
Sent from my SGH-T999 using xda app-developers app

themadzionist said:
Hey, if anyhow could help that would be great. I followed ask the instructions to flash Clockwork mod on my t999. Odin recognized phone, i pda'd clockworkmod.tar file, it passed and rebooted. Then i held power up+home+power and entered Android system recovery. Have done a few times and i continue to get Android system recovery. Obviously my phone isn't rooted yet, just got it. Is there an alternate way to get clockwork mod or am i doing something wrong? Thank you, any help is much appreciated...
Jake
Click to expand...
Click to collapse
Have you installed recent LH2 OTA update? This is a known issue with this update,quite well described here. To root your phone, you should flash CWM with ODIN, then don't let the phone boot normally (by pulling out the battery), then boot in CWM once and flash root. Finally, after booting the phone normally, CWM will be rewritten, but you will have rooted phone. Hope this helps.

There's another really helpful tutorial on rooting without tripping the flash counter. It's stickied around here somewhere, I'll see if I can find it.
http://forum.xda-developers.com/showthread.php?t=1771687
And you may want to bookmark this thread too:
http://forum.xda-developers.com/showthread.php?t=1723175

ega2oo2 said:
Have you installed recent LH2 OTA update? This is a known issue with this update,quite well described here. To root your phone, you should flash CWM with ODIN, then don't let the phone boot normally (by pulling out the battery), then boot in CWM once and flash root. Finally, after booting the phone normally, CWM will be rewritten, but you will have rooted phone. Hope this helps.
Click to expand...
Click to collapse
Thank you very much, I did update it right when i got the phone. I will try that exactly when i get home, thanks alot, i appreciate all the help

ega2oo2 said:
Have you installed recent LH2 OTA update? This is a known issue with this update,quite well described here. To root your phone, you should flash CWM with ODIN, then don't let the phone boot normally (by pulling out the battery), then boot in CWM once and flash root. Finally, after booting the phone normally, CWM will be rewritten, but you will have rooted phone. Hope this helps.
Click to expand...
Click to collapse
By the way, it worked perfectly, i suggest though, when in Odin, uncheck auto reboot, so it didn't reboot after it passes, then i just pulled battery out and tried booting in CWM and it worked. Guess you can't let it reboot or you have to do it again. My last question is, do i keep my phone in usb debugging mode with root on stock rom? I had a galaxy s2 and i know some custom roms had to have usb debugging on. Just not sure if stock with root i should or shouldn't. Thanks again, i hit all the thanks meters on this one, was driving me nuts....Jake

Recorvery
themadzionist said:
By the way, it worked perfectly, i suggest though, when in Odin, uncheck auto reboot, so it didn't reboot after it passes, then i just pulled battery out and tried booting in CWM and it worked. Guess you can't let it reboot or you have to do it again. My last question is, do i keep my phone in usb debugging mode with root on stock rom? I had a galaxy s2 and i know some custom roms had to have usb debugging on. Just not sure if stock with root i should or shouldn't. Thanks again, i hit all the thanks meters on this one, was driving me nuts....Jake
Click to expand...
Click to collapse
I use TRWP is a better recovery for sg3

[Q] Some issues with ClockWorkMod/Phone

EDIT: I have fixed it by continuely running ROM Manager to reinstall 5.2.0.7, I did fix permissions then installed 5.2.0.7 and it works. However still having problems rebooting and shutting down, but i will fix that later
So recently i updated CWM. Then i ran into some issues, is that when i tried to do a date wipe and a cache wipe to do a clean install it wipes the user data fine but freezes on wipe /cache. i rebooted and tried again and
Sidenote: when I try to reboot or shutdown it gets stuck at the "shutting down" pop up and never fully shuts down/reboots
I am a bit afraid to try anything more right now
EDIT: I tried to get it into download mode, to maybe try to use odin to flash the older version of CWM. Problem is that i can't get it to go into download mode, and can't find a odin flashable CWM

you dont have any backups? are you on any current ROMs?
If so,
download clockwork recovery or ROM manager from the playstore
open it up
Allow super user permissions
Scroll down to the very bottom you will see a option that says "all clockworkmod recoveries"
Make sure you are on a WIFI for a good download
Choose the CWM 5.0.2.7 version, that one is more stable.. i hate the new one its gay as hell lol
Let it download itll need a good minute, try not to do anything else. you may have to try to download a few times if it freezes just be patient
once it downloads you are good to go and you can flash any ROM
let me know if you have more questions just PM me..
Hit thanks if this helped!

abesgs2 said:
you dont have any backups? are you on any current ROMs?
If so,
download clockwork recovery or ROM manager from the playstore
open it up
Allow super user permissions
Scroll down to the very bottom you will see a option that says "all clockworkmod recoveries"
Make sure you are on a WIFI for a good download
Choose the CWM 5.0.2.7 version, that one is more stable.. i hate the new one its gay as hell lol
Let it download itll need a good minute, try not to do anything else. you may have to try to download a few times if it freezes just be patient
once it downloads you are good to go and you can flash any ROM
let me know if you have more questions just PM me..
Hit thanks if this helped!
Click to expand...
Click to collapse
I am running AKOP Oct 1st nightly. I have backups with Titanium, and an older one for Nandroid backup. I launched ROM manager and tried to install the 5.0.2.7 version but ROM Manager seems to freeze and not work. I kill the app but it doesn't launch properly and only shows the title. I have to take out the battery and reboot to be able to launch ROM Manager up again. I think i may need to find a way to boot into Download and use odin to flash a new CWM and maybe the stock rooted ROM and go from there. I have to agree about the new CWM it is kinda a step back, wish i had looked it up before update.
I am going to PM you but I always like to have this out there in case anyone else is having the same issue or has had it.

for me...sometimes i cant get into recovery/download mode is because
i have a phone case and both buttons arent fully pressed. and as for the tar recovery
Odin T989 tar its a stable version
i recommend using twrp for now for more stability
i had a had a soft brick like everybody else using cwm 6.0.1.4 lol

ClaireH said:
for me...sometimes i cant get into recovery/download mode is because
i have a phone case and both buttons arent fully pressed. and as for the tar recovery
Odin T989 tar its a stable version
i recommend using twrp for now for more stability
i had a had a soft brick like everybody else using cwm 6.0.1.4 lol
Click to expand...
Click to collapse
I press both buttons and i end up in CWM 6.0.1.4. no case on the phone right now.
I have tried to download and install 5.2.0.7 though ROM Manager but it just freezes. This is what pops up right before it freezes http://i.imgur.com/1ryrP.png if it helps. I think ODIN may be the only way if i can make it boot to download that is.

Spud37 said:
I press both buttons and i end up in CWM 6.0.1.4. no case on the phone right now.
I have tried to download and install 5.2.0.7 though ROM Manager but it just freezes. This is what pops up right before it freezes http://i.imgur.com/1ryrP.png if it helps. I think ODIN may be the only way if i can make it boot to download that is.
Click to expand...
Click to collapse
yeah just flash the tar file thru odin and/or just flash over twrp (goomanager then go to the app>menu button>install openrecoveryscript)

ClaireH said:
yeah just flash the tar file thru odin and/or just flash over twrp (goomanager then go to the app>menu button>install openrecoveryscript)
Click to expand...
Click to collapse
My problem is that I can't get it to boot into download mode, that Odin needs it to be in for it to function. Pressing the volume buttons just makes it go into CWM.

I got it to reinstall 5.2.0.7. It took awhile but it looks like its still working. Just tested it out and it works. Now i know to not update CWM. What are the other recovery options that might be better then CWM?

Spud37 said:
I got it to reinstall 5.2.0.7. It took awhile but it looks like its still working. Just tested it out and it works. Now i know to not update CWM. What are the other recovery options that might be better then CWM?
Click to expand...
Click to collapse
TWRP 2.3.1.0 FTW!!
Edit: TWRP 2.3.1.1 FTW!!
Sent from my SGH-T989 using xda premium

LoopDoGG79 said:
TWRP 2.3.1.0 FTW!!
Edit: TWRP 2.3.1.1 FTW!!
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
EDIT: Does it still manage installation and wipeing of data and cache the same way as CWM?