Related
Was using Odin , got stuck forever. The phone won't do anything now, won't reboot normally won't boot into recovery , won't boot into download mode. Totally non reponsive , nothing ever on screen , no charging icon . Battery out then back in , plugged into usb then put in battery.. tried it all.
looking for suggestions, phone is going back to t-mobile if I cant fix this
Try entering download mode again and reflash your phone. Download the tar again in case the previous was corrupt.
Pull out the battery and put it back in. hold vol up and down at the same time and then connect the USB cable. This will get you back into download mode.
Good luck!
Also, I believe this is in the wrong forum. I'm not a mod but I believe it belongs in the general section.
Sent from my SGH-T989 using xda premium
I have tried for an hour straight to enter DL mode , no soap
ransome7 said:
I have tried for an hour straight to enter DL mode , no soap
Click to expand...
Click to collapse
It's a common misconception (I did it myself) that the power button is also used in the sequence to enter download mode, this isn't the case. Just hold down vol up & down and connect the usb cable, do not press the power button.
Just trying to rule everything out
If this doesn't work for you then I'm out of ideas. Are you still able to get into recovery? If you are, try flashing a ROM and see what happens.
Just to clarify, what does your phone do when you turn it on? Does it boot loop or get stuck somewhere?
EDIT:NVM reread original post (selfn00b'd myself). Totally unresponsive? I believe you should still be able to get into d/l mode since I think they set that up as failsafe. If you can't then it probably will have to go back. Bummer
I'v herd that it somtimes helps to take the battery out and let it sit for 30 min
But thankfully I can not confirm!
May also want to try different computer and cable
Try ADB
Sent from my SGH-T989 using xda premium
quest4fire said:
Try ADB
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
Can You ADB if your phone won't power up?
You need your PC to recognize it. Is it seeing your phone or is it completely dead?
Sent from my SGH-T989 using xda premium
DOWNLOAD MODE
power off phone
pull out battery
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode
make sure u have the proper samsung drivers
movieaddict said:
DOWNLOAD MODE
power off phone
pull out battery
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode
make sure u have the proper samsung drivers
Click to expand...
Click to collapse
You did not read the OP , The phone died after using Odin(which DL mode is required) , obviously the phone is easy to get into DL mode. The phone is stone dead and won't power into anything
its funny when people suggest you try something to power on your phone even after youve just told them you have tried it all. kind of annoying actually.
but same thing happen to me man. i finally gave up and sent it to samsung today, that would probably be your best option. either that or tmobile
k2worldwweapon said:
its funny when people suggest you try something to power on your phone even after youve just told them you have tried it all. kind of annoying actually.
but same thing happen to me man. i finally gave up and sent it to samsung today, that would probably be your best option. either that or tmobile
Click to expand...
Click to collapse
Thats what I ended up doing , they are sending out a new phone. It is disturbing that you can actually KILL your phone using Odin. I have flashed a ton of phones a million times and never ended up with a door stop.
Im surprised the GS2 is brickable. I came from a Vibrant (Galaxy S) and that phone was impossible to brick. I was always able to bring it back to download mode but sometimes i had to try different combinations of things to get it into DL mode like remove sim or battery etc. What I'm saying is your phone can be fussy.
Sent from my SGH-T989 using xda premium
I bricked mine flashing a boot.img to the wrong partition in recovery. This phone is very brickable. T-Mobile gave me a new one but the first thing they asked me was if I rooted it. I said what's that mean
Sent from my Nexus S using Tapatalk
My brother, myself, and my fiancee all got s2's. Day of, I odin'd recovery to both mine and my brother's and rooted with no problem. tried it on my fiance's, dead in the water. did the same exact thing to all 3, didn't change any procedures. If you keep trying to turn it on, sometimes the led flashlight from the camera will flash for a second, other times it actually turns on and continues to work as normal but once you turn it off again, it may not turn on again. i got it to turn on again and actually odin'd back to stock recovery. problem was NOT fixed even after this, and after i turned it off again, it turned on again once, but never again after that. filed for warranty exchange. i used to think as long as you can odin back to stock you're fine, but it clearly wasn't the case. looks like we just got unlucky. if you bought the phone from a corporate tmobile store, bring your receipt and trade it in at the store because they give you a new phone. if you do a warranty exchange, they send you a refurbished phone (although the s2 is new enough that they might send you a new one anyway if you're lucky).
Hello all, my name is Matt.
I bricked my Epic 4G Galaxy S installing the EL13 firmware.
I had it rooted with CWM 5.0.2.7 (or whatever) with CleanGB 1.03 and the Samurai kernal (think it's 1.06, whichever is the latest). I was flashing it through Odin3 and it abruptly aborted and failed the transfer. I'm thinking it may have been a bad USB cable. I pulled the battery since it didn't reboot or take any button commands.
I does not show the Samsung logo, and when i plug in power/usb cable it does not show a red light. Do i have to do the Unbrickable MOD or is there anything I can do through a PC?
emtee40 said:
Hello all, my name is Matt.
I bricked my Epic 4G Galaxy S installing the EL13 firmware.
I had it rooted with CWM 5.0.2.7 (or whatever) with CleanGB 1.03 and the Samurai kernal (think it's 1.06, whichever is the latest). I was flashing it through Odin3 and it abruptly aborted and failed the transfer. I'm thinking it may have been a bad USB cable. I pulled the battery since it didn't reboot or take any button commands.
I does not show the Samsung logo, and when i plug in power/usb cable it does not show a red light. Do i have to do the Unbrickable MOD or is there anything I can do through a PC?
Click to expand...
Click to collapse
EL13? Could you link what you were trying to flash? I don't think its for our phone buddy
But either way have you tried taking out the battery and sdcard only plugging it in?
Sent from my SPH-D700 using xda premium
It's the firmware/2.3.6 leaked from samsung I found here.
Is it for the S2?
*EDIT*
Effin crap. Rookie mistake I'm taking it. I didn't pay attention to the 'Touch' in the column for phone. Can I use the Unbrickable MOD to put in the files I need back in it after flashing it in the wrong firmware???
emtee40 said:
It's the firmware/2.3.6 leaked from samsung I found here.
Is it for the S2?
Click to expand...
Click to collapse
Yes it is. Check the forum you are on...
Sent from my SPH-D700 using Tapatalk
sonuvabitch
I'm not a forum newbie (I do a lot of audio engineering), so I feel like a BIG idiot for not double checking my info. I spent 2 week researching rooting before I did it.
I guess I had to much confidence...
I'll make a vid of me doing the Unbrickable MOD for ya guys when I get around to doing it. If I don't mess that up...
emtee40 said:
sonuvabitch
I'm not a forum newbie (I do a lot of audio engineering), so I feel like a BIG idiot for not double checking my info. I spent 2 week researching rooting before I did it.
I guess I had to much confidence...
I'll make a vid of me doing the Unbrickable MOD for ya guys when I get around to doing it. If I don't mess that up...
Click to expand...
Click to collapse
Sorry man id try using odin, iirc the unbrickable mod didn't end up working for us?
Sent from my SPH-D700 using xda premium
emtee40 said:
sonuvabitch
I'm not a forum newbie (I do a lot of audio engineering), so I feel like a BIG idiot for not double checking my info. I spent 2 week researching rooting before I did it.
I guess I had to much confidence...
I'll make a vid of me doing the Unbrickable MOD for ya guys when I get around to doing it. If I don't mess that up...
Click to expand...
Click to collapse
Audio engineering ? How is it? I want to pursue that career after highschool
Sent from my SPH-D700 using XDA Premium App
don't do an unbrickable mod, just download the right file from the sticky in the android dev. section and odin it from download mode. make sure you have the right file!!! it's "EC05" ... good luck!
So if the Unbrickable mod don't work, how am i supposed to get odin to work? it doesn't show up in the COM list when i plug the phone in. I tried the no sdcard/battery trick, and it doesn't do anything.
Am I up the creek then?
*EDIT*
I can't get into download mode. No buttons re-act. It's a hard brick, not a soft brick. I've search everywhere. If it can't be fixed, anybody need parts???
emtee40 said:
So if the Unbrickable mod don't work, how am i supposed to get odin to work? it doesn't show up in the COM list when i plug the phone in. I tried the no sdcard/battery trick, and it doesn't do anything.
Am I up the creek then?
*EDIT*
I can't get into download mode. No buttons re-act. It's a hard brick, not a soft brick. I've search everywhere. If it can't be fixed, anybody need parts???
Click to expand...
Click to collapse
Try popping the battery in and out repeatedly while attempting to go into download mode. It will eventually reset the phone and work. Then try all USB ports until Odin reacts. You will have to pull the battery and reset for Odin to successfully repeat after that. If no ports show the phone, try a Blackberry cable or any other one but stock. Also reinstall the drivers.
emtee40 said:
So if the Unbrickable mod don't work, how am i supposed to get odin to work? it doesn't show up in the COM list when i plug the phone in. I tried the no sdcard/battery trick, and it doesn't do anything.
Am I up the creek then?
*EDIT*
I can't get into download mode. No buttons re-act. It's a hard brick, not a soft brick. I've search everywhere. If it can't be fixed, anybody need parts???
Click to expand...
Click to collapse
Try holding power and 1 with the battery and sd card out and plug in the cable at the same time.
Sent from my SPH-D700 using xda premium
I'll try the download mode W/USB when I get home. I'll try the battery removal tip to. I let it sit for 1 hr then put in the battery and nothing happened. Like I said, even when I plug in the charger the LED don't come on.
emtee40 said:
I'll try the download mode W/USB when I get home. I'll try the battery removal tip to. I let it sit for 1 hr then put in the battery and nothing happened. Like I said, even when I plug in the charger the LED don't come on.
Click to expand...
Click to collapse
Try plugging it in with no battery
Sent from my SPH-D700 using xda premium
Don't Panick Yet
I had a problem flashing ACS recovery with a corrupt zip that effectively bricked my phone to the point Sprint Techs declared it dead and ordered me a replacement. Let me tell you something that worked to revive that phone. Pull off the battery cover. Look just down and to the left of the camera lens for a small button that you press with a pin/paper clip/etc. If I recall, press and hold it for about 5 - 10 seconds, and when you go to boot up, it will immediately boot into download mode. That let me revive my completely non responsive (No charging LED, battery ICON, boot, etc) Epic 4G
kennyglass123 said:
Try popping the battery in and out repeatedly while attempting to go into download mode. It will eventually reset the phone and work. Then try all USB ports until Odin reacts. You will have to pull the battery and reset for Odin to successfully repeat after that. If no ports show the phone, try a Blackberry cable or any other one but stock. Also reinstall the drivers.
Click to expand...
Click to collapse
What kenny said... my neice has flashed the wrong roms on numerous occasions and not once was I not able to get her back into download mode with the slipping the battery in and out while holding 1 and power button while doing it... keep trying it will go... these phones are very hard to brick...
Sent from my SPH-D700 using Tapatalk
emtee40 said:
So if the Unbrickable mod don't work, how am i supposed to get odin to work? it doesn't show up in the COM list when i plug the phone in. I tried the no sdcard/battery trick, and it doesn't do anything.
Am I up the creek then?
*EDIT*
I can't get into download mode. No buttons re-act. It's a hard brick, not a soft brick. I've search everywhere. If it can't be fixed, anybody need parts???
Click to expand...
Click to collapse
Buttons don't work in download mode, nothing works in download mode. It's not standard user mode. Get a better USB cord, and/or plug the cord into the BACK of your computer (ie USB port directly on the motherboard). If that doesn't work, try a newer computer. Also make sure ALL the drivers are installed and fully updated. Also, have Odin open and set up before plugging your phone in (obviously, while in download mode). You're not bricked yet! Just sponged...
BEER!
HODriver said:
I had a problem flashing ACS recovery with a corrupt zip that effectively bricked my phone to the point Sprint Techs declared it dead and ordered me a replacement. Let me tell you something that worked to revive that phone. Pull off the battery cover. Look just down and to the left of the camera lens for a small button that you press with a pin/paper clip/etc. If I recall, press and hold it for about 5 - 10 seconds, and when you go to boot up, it will immediately boot into download mode. That let me revive my completely non responsive (No charging LED, battery ICON, boot, etc) Epic 4G
Click to expand...
Click to collapse
Non exsistent button. I use to believe it, but it's fake.
Sent from my SPH-D700 using xda premium
Originally Posted by emtee40 View Post
So if the Unbrickable mod don't work, how am i supposed to get odin to work? it doesn't show up in the COM list when i plug the phone in. I tried the no sdcard/battery trick, and it doesn't do anything.
Am I up the creek then?
*EDIT*
I can't get into download mode. No buttons re-act. It's a hard brick, not a soft brick. I've search everywhere. If it can't be fixed, anybody need parts???
bender beerman said:
Buttons don't work in download mode, nothing works in download mode. It's not standard user mode. Get a better USB cord, and/or plug the cord into the BACK of your computer (ie USB port directly on the motherboard). If that doesn't work, try a newer computer. Also make sure ALL the drivers are installed and fully updated. Also, have Odin open and set up before plugging your phone in (obviously, while in download mode). You're not bricked yet! Just sponged...
BEER!
Click to expand...
Click to collapse
he said he can't get into download mode. but you could always take it to sprint if you have insurance. just play dumb say the phone wanted to update and the batttery fell out or something like that. before you do that if you have a stand alone battery charger charge your battery on that and retry. I have 2 batterys and when i tried to get my phone UN-bricked both of the batterys had no juice in them. hope you can get it working again.
The hardware reset button its there, I'm looking at it on my phone now. Don't try if you don't want to, I don't really care.
Sent from my SPH-D700 using XDA App
HODriver said:
The hardware reset button its there, I'm looking at it on my phone now. Don't try if you don't want to, I don't really care.
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
Take your phone apart and take a picture of the "button" then... 50 dollars says there is no button there... and no I'm not talking about the hole I want a pic of the actual button... 50 bucks to anybody that can take a pic of this so called resurection button!!.!!!
Sent from my SPH-D700 using Tapatalk
I may have bricked my phone, and now won't power up at all. Here's what happened.
Last night I tried to unroot my phone in order to install EL30. First I powered phone into download mode. Then used Odin to install EC05, but Odin seemed to be taking forever, as the instructions said it would take 7-8 minutes... It appeared to be working but very slowly. So after half an hour, I decided to let it work overnight and went to bed, leaving the Odin screen running on computer and the phone with yellow "Downloading" on screen.
This morning, the Odin screen had several more lines of successful completed steps, but did not say "Finished" yet. The phone screen was off. I thought maybe the battery had died because perhaps in download mode maybe the battery wasn't charging? So I unplugged it from USB cord, put in a fully charged battery, and now to my problem...
Phone won't power up or do ANYTHING. I know of 3 methods to power up phone, (pwr button, #1 + pwr, volume up + camera + pwr) and none of them are doing anything. screen never changes from black. I've removed battery, tried powering up while plugged into usb/computer, with & without sd card, etc. It's like the phone is just broke!
HELP?!
Hold down the little pin next to the camera. Also wait for awhile and eventually itll go into download mode. Make sure you keep the battery out when trying to go into download mode.
Sent from my C9AN0GEN-MOd EpicOG
Also, did you have repartition checked? Only auto reboot should be selected unless your coming from mtd.
Sent from my C9AN0GEN-MOd EpicOG
b16flybye said:
Hold down the little pin next to the camera. Also wait for awhile and eventually itll go into download mode. Make sure you keep the battery out when trying to go into download mode.
Sent from my C9AN0GEN-MOd EpicOG
Click to expand...
Click to collapse
DUDE THERES NO BUTTON [email protected]!?!$#%^?
To the OP:
Did you try leaving the battery out and having plugged into the back of the desktop *if of course its a desktop* and tried to go into download mode using the pc as its power source? Is it a nonstock cable that you used?. Its more than likely because you didn't have a non-stock cable or yours was bad and need a new one. Odin shouldn't take but 5 minutes top..... mine does it around 3:30 minutes..if it seems like its hangs then redo it pull the plug and start over. Usually factoryfs.rfs takes the longest around 2minutes.
Sent From My SPH-D700 Running Android 4.0 :sly:
Biggoron said:
DUDE THERES NO BUTTON [email protected]!?!$#%^?
To the OP:
Did you try leaving the battery out and having plugged into the back of the desktop *if of course its a desktop* and tried to go into download mode using the pc as its power source? Is it a nonstock cable that you used?.
Sent From My SPH-D700 Running Android 4.0 :sly:
Click to expand...
Click to collapse
I think he is talking about on the back of the phone it looks like there is a small recessed button under the left of the camera lens
K3VlN said:
I think he is talking about on the back of the phone it looks like there is a small recessed button under the left of the camera lens
Click to expand...
Click to collapse
I know what he's talking about he "thinks" inside that hole there's a reset button. There's not....
Sent From My SPH-D700 Running Android 4.0 :sly:
First get a better cable, that's why the data wouldn't transfer. 2nd take out the battery and sd card, with Odin up on the computer connect the New USB cable and quickly put it into download mode and Odin away. At this point include the PIT and check repartition. You will need to put the battery back in after it succeeds and tries to boot. For mor tips sea+ch the Development forum for "How to recover a semi-bricked epic" there is a whole thread on it.
Sent from my SPH-D700 using XDA App
No luck on any of the suggestions above. Phone will not power up at all.
I removed battery and SD card, and plugged into usb cable with Odin open on computer and tried powering up phone into Download Mode (#1 + pwr), nothing (also tried holding #1 + pwr for a couple minutes patiently).
I have had a nightmare trying to find a usb cable and usb port on my computer that work together. No this is not the stock Samsung cable. I am using a cable that has worked for me in the past, but often times a cable/port that works one day won't work the next. So you are probably right in that my original issue getting Odin to download to phone last night may have been a cable problem, however my current problem is simply that the phone seems to be nothing more than a paper weight right now. Just won't power up at all.
And no, I didn't have repartition checked. Phone only had been rooted and CMW, no MTD.
Thank you all for your help, and eagerly awaiting additional suggestions?
Umm yeah man bad idea leaving it alone looks like its time to visit the morgue.... search online to see if someone will restore a solid brick its possible especialy if you cannt use a jig to get into download mode
There are people who will hook up their pc to the main chip on the phone and restore it that way.
Sent from my SPH-D700 using xda premium
Biggoron said:
Umm yeah man bad idea leaving it alone looks like its time to visit the morgue.... search online to see if someone will restore a solid brick its possible especialy if you cannt use a jig to get into download mode
There are people who will hook up their pc to the main chip on the phone and restore it that way.
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Pardon my ignorance, I'm learning... But what is a jig?
jcole2424 said:
Pardon my ignorance, I'm learning... But what is a jig?
Click to expand...
Click to collapse
Its basically a an ohm resister and a usb port you can google it "download mode jig
You can acutally make a homemade one google will find a how to also ..... this will "jump" you into DLmode and be able to odin.
Sent from my SPH-D700 using xda premium
Biggoron said:
Its basically a an ohm resister and a usb port you can google it "download mode jig"
Sent from my SPH-D700 using xda premium
Click to expand...
Click to collapse
Try holding 1 and power button and sliding the battery in and out until download mode boots... it has worked for numerous people in your position...
Sent from my SPH-D700 using Tapatalk
flastnoles11 said:
Try holding 1 and power button and sliding the battery in and out until download mode boots... it has worked for numerous people in your position...
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Yes, exactly this^^^^^^^^^^^^^^^^^^^^^^^^
It is like the phone goes into some kind of coma and popping the battery in and out while trying to get into download mode is CPR.
flastnoles11 said:
Try holding 1 and power button and sliding the battery in and out until download mode boots... it has worked for numerous people in your position...
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
COMPLETELY forgot about that thanks flast
Sent from my SPH-D700 using xda premium
I'm no pro a bringin epics back from the dead but in his condition I believe the phone is completely dead. I've done this to my phone on several different occasions just to get my phone replaced lol. My good friend works for a sprint repair center and he said that most times pulling the usb during odin will kill the device. I'm not tring to be pessamistic as I really hope you fix it but from what your saying then its VERY VERY unlikely! Especially if you hit repartition and then pulled the cord... if you don't belive me then try it and let me know how it goes lol
Sent from my SPH-D700 using Tapatalk
travismoreno said:
I'm no pro a bringin epics back from the dead but in his condition I believe the phone is completely dead. I've done this to my phone on several different occasions just to get my phone replaced lol. My good friend works for a sprint repair center and he said that most times pulling the usb during odin will kill the device. I'm not tring to be pessamistic as I really hope you fix it but from what your saying then its VERY VERY unlikely! Especially if you hit repartition and then pulled the cord... if you don't belive me then try it and let me know how it goes lol
Sent from my SPH-D700 using Tapatalk
Click to expand...
Click to collapse
Probably 4 out of 5 of these bricks caused by a failed Odin have come back to life by popping the battery in and out and trying to get into download mode. I can count the number that I have seen never come back on my hands. Some people give up to soon, others found leaving it overnight and trying again has worked. But a lot have been revived. Also he did not have repartition checked so has an even better chance.
When you try to put in download mode without the battery are you holding the buttons down while plugging the cable in? If not then do it that way
Sent from my SPH-D700 using xda premium
Biggoron said:
DUDE THERES NO BUTTON [email protected]!?!$#%^?
No need to roll your eyes, geez. What is that button then? Cause there IS a button there.
Sent From My SPH-D700 Running Android 4.0 :sly:
Click to expand...
Click to collapse
Sent from my C9AN0GEN-MOd EpicOG
Man this sucks if any of the aforementioned methods dont work it sounds like you are going to have th make a JTAG to unbrick your phone i found this on the capitvate forums a while back been keeping it around just in case but you can give it a try. i have never had to try any of these methods so if you do let us know how it goes
http://forum.xda-developers.com/showthread.php?p=15330252#post15330252
if nothing else you can always try to take it to sprint and act like you have no idea what happened and dont mention anything about rooting and take your sd card out cause it contains root files
hope you get this worked out bud
b16flybye said:
Sent from my C9AN0GEN-MOd EpicOG
Click to expand...
Click to collapse
Okay then take apart your phone and please take a picture of your non exisitent magical reset button.....there is no button never has been never will be..... people think there is because they usualy left their battery out long enough for the phone to lose charge.
Sent From My SPH-D700 Running Android 4.0 :sly:
I tried to flash the aokp m5 rom but didn't flash the el26 cwm file. Now when i try to boot the phone, it doesn't start. the blue light just lights up and stays light untill i pull the battery. I also tried to get into recovery and it just does the same thing. I downloaded odin, but im not sure what im supposed to do with it. if anyone knows how to help, i would be extremely grateful. Thank you
Pull battery, put back in, hold volume down to get in download mode, start Odin on pc , plug in phone, press volume up, Odin should respond with COM# click the phone button and select your stock from such as the cwm el26. Just read the forums. Don't feel bad it happens to all of us once in awhile. Thankfully I have managed to fix most of my screw ups. Next time just read everything and save yourself hours......experience
But then again that could make it worse. So for ya sake use the search button
My phone doesn't allow me to get into download mode mode... Does that mean it is bricked?
Well I have more than once brought my device that I though would never come back. I know I have got ton my phone and my friends att infuse to connect to Odin without actually getting a screen on the phone and was able to get a recovery to restore the phone back to normal. From my experience though its been hard to brick these things... I sometimes wonder if people bricking is just user error.... knock on wood....
OmarEvo said:
My phone doesn't allow me to get into download mode mode... Does that mean it is bricked?
Click to expand...
Click to collapse
I don't know what that other guy was saying but you have to hold the volume down Button and the power button until it shows the custom OS menu the press volume up and then download sfhubs one-click EL29 and then open it, its in development fyi, connect your cable to your PC and your phone and the program will have a yellow box light up that will say COM#, don't worry about the number next to COM, then press start and wait until it reboots. Do not unplug the phone or close the program. If it works for you please respond back here so others can hear the results.
Sent from my SPH-D710 using xda premium
Is your phone recognized by adb? Maybe try "adb reboot download"?
Also if you read up about a jigg for the epic touch, in case this doesn't work, them that could also fix it. You might need to spend something though but I can't clarify this because i've never bricked before.
Sent from my SPH-D710 using xda premium
Nabbu said:
I don't know what that other guy was saying but you have to hold the volume down Button and the power button until it shows the custom OS menu the press volume up and then download sfhubs one-click EL29 and then open it, its in development fyi, connect your cable to your PC and your phone and the program will have a yellow box light up that will say COM#, don't worry about the number next to COM, then press start and wait until it reboots. Do not unplug the phone or close the program. If it works for you please respond back here so others can hear the results.
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Yea he's explained it better than be. I'll just be posting from my laptop here on out. On screen keyboards kill me. I miss my g1s QWERTY. Ah well.
I press volume down and power but the custom os screen doesn't show up, all the phone does flash the blue notification light and the screen looks as if it is off.
This isnt something that a jig can help and for everyone else trying to help he cant access download mode or recovery.
You're most likely hard bricked and the only thing you could try is to leave the battery out overnight then try to turn the phone on again. If you still have black screen with just the notification LED on then the last resort would be a jtag service which isnt guaranteed to work either.
This is a known issue from wiping any partitions on an ics kernel.
What would a jtag service be?
You're going to need a USB jig to get your computer to recognize your phone to download the firmware over the current one. Wait till tomorrow if someone doesn't respond because i'm assuming all the devs and admins are knocked out and they are the ones who can help.
Sent from my SPH-D710 using xda premium
Geez a lot got posted while I was typing.
Seeing as how you can't get into download mode or recovery I'm afraid you're out of luck. (unless the jigg thing works, which I don't think will at this point)
This is a hard lesson to learn but exactly why you don't take any shortcuts when flashing custom ROMs.
What is a jtag service, and how would I go about it if I tried to get it done?
Thanks for helping them out! Its late and I forgot about the overnight battery pull and jtag.
Sent from my SPH-D710 using xda premium
OmarEvo said:
What is a jtag service, and how would I go about it if I tried to get it done?
Click to expand...
Click to collapse
Do a search in this forum, since there's been a lot of bricking I'm sure you'll find a ton of threads concerning this.
http://mobiletechvideos.mybigcommerce.com/samsung-epic-4g-touch-jtag-brick-repair/
Thats one of the companies offering jtag services. I believe some people have used it before but im not sure of their results.
Yeah, I'm only sixteen, so I'm trying to grasp all these different things. I'm used to htc because i had an evo, then i got an evo 3d. I use the e4gt as a second phone, but all the things for a rooted samsung are completely different compared to an htc. Thank you for all your help guys. I have learned my lesson now
Good luck. I hope the overnight battery pull helps or that the jtag folks can get you up and running.
For the overnight battery pull, when I try to boot it, should I try to put it into download mode? Or just plain boot? Thanks again
Hi , I'm having problems with my Galaxy T999. I have rooted and have not yet installed any kernels/roms. The only thing i did was installed a couple apps from the play store . and wanted to check out the CWM recovery menu and was going to try to installed "hyperX camera mod". First thing i did was shut off the phone . Then pressed on the Volume up+Home+Power button . After doing that my phone didn't turn on or anything , no vibration or anything . I hooked it on with my computer and press the power button and it was able to connect and then disconnected. I am at lost now and can't seem to find any answer . Have looked every where not sure what to do now. Any solution will be much appreciated .
***
It seems to disconnect due to no driver found for QHUSUB_DLOAD .
Without any solutions I'll probably gonna get my phone replace . T_T
Does your phone disconnect immediately, or does it stay connected for a brief amount of time? If it stays connected briefly, try using adb during this period to boot into recovery. The command is "adb reboot recovery" (without the quotes).
kengvang25 said:
Hi , I'm having problems with my Galaxy T999. I have rooted and have not yet installed any kernels/roms. The only thing i did was installed a couple apps from the play store . and wanted to check out the CWM recovery menu and was going to try to installed "hyperX camera mod". First thing i did was shut off the phone . Then pressed on the Volume up+Home+Power button . After doing that my phone didn't turn on or anything , no vibration or anything . I hooked it on with my computer and press the power button and it was able to connect and then disconnected. I am at lost now and can't seem to find any answer . Have looked every where not sure what to do now. Any solution will be much appreciated .
***
It seems to disconnect due to no driver found for QHUSUB_DLOAD .
Without any solutions I'll probably gonna get my phone replace . T_T
Click to expand...
Click to collapse
Try to remove your battery then plug in charger. See if you can turn on. If you can turn it on, leave it 30 minutes. Then put in the battery.
By the looks of the result the computer gives you when you plug it in, seems it is hard bricked! Are you sure you didn't flash anything from the I9300 section like a rom?
Sent from my SGH-T999
The hyper x camera mod isnt entirely for our phone. I've read that it's flashable to our phone though, so I'm not sure what's going on here. Maybe the OP needs to link where he got the mod. Ih and stay away from the intl version all together.
Sent from my SGH-T999 using xda premium
mt3g said:
The hyper x camera mod isnt entirely for our phone. I've read that it's flashable to our phone though, so I'm not sure what's going on here. Maybe the OP needs to link where he got the mod. Ih and stay away from the intl version all together.
Sent from my SGH-T999 using xda premium
Click to expand...
Click to collapse
Yup its a paperweight. The Intl version has the system partition in a different place. So you borked an important one.
Only thing that's throwing me off is that the OP suggests he didn't actually get around to flashing the mod.
Sent from my SGH-T999 using xda app-developers app
kengvang25 said:
It seems to disconnect due to no driver found for QHUSUB_DLOAD .
Click to expand...
Click to collapse
That's a good sign! Looks like you're able to enter Download mode. Download Odin and flash a stock ROM.
vinvam said:
That's a good sign! Looks like you're able to enter Download mode. Download Odin and flash a stock ROM.
Click to expand...
Click to collapse
No that's a sign of hard bricked. Check other threads asking for help. They all have that displaying after they connect it to a pc
Sent from my SGH-T999
chrisram88 said:
No that's a sign of hard bricked. Check other threads asking for help. They all have that displaying after they connect it to a pc
Sent from my SGH-T999
Click to expand...
Click to collapse
Oops, never mind! chrisram88 is correct. :good:
I pretty much got the same problem except with an i9300. Is there any way to fix a hard brick or does it need a new motherboard??
vinvam said:
Oops, never mind! chrisram88 is correct. :good:
Click to expand...
Click to collapse
Vadim89 said:
I pretty much got the same problem except with an i9300. Is there any way to fix a hard brick or does it need a new motherboard??
Click to expand...
Click to collapse
Jtag fix... Costs you around 60! http://mobiletechvideos.mybigcommerce.com/samsung-galaxy-s-iii-jtag-brick-repair/
Sent from my SGH-T999
Vadim89 said:
I pretty much got the same problem except with an i9300. Is there any way to fix a hard brick or does it need a new motherboard??
Click to expand...
Click to collapse
I just sent my bricked S2 in to http://www.cell-dr.com/
I talked to Randy over there and he was very helpful. Shoot him an email.
Thanks guys for all the great response . I'm not really good with tech stuff so I just got it replace with a new one instead .
And this is the tut that i followed how to root my Galaxy S3 T-999 :
galaxy s 3root .com
What if I install a ROM for I9300 section? is there a solution?
Yup send it in for a jtag repair like linked a few posts up.
Sent from my SGH-T999L using xda premium
SGS3 T999v wont start up.
My sgs3 t999v would turn off by itself every other time I hit the lock button.
like I would be txting and then if I hit the lock button it would turn off.
So I though a factory reset would fix the problem. (volume up + home).
after the reset it still kept turning off randomly.
and now I cant even get it to the normal interface. or get in to the manual reset mode.
Device was previously jail broken, however was returned back to stock and was working fine for 3 months.
I had my otterbox on for every fall my phone had, so I dont think it would be a hardware issue.
the phone was running 4.1.1 I believe.
stock rom.
help please! :C
ekimera said:
My sgs3 t999v would turn off by itself every other time I hit the lock button.
like I would be txting and then if I hit the lock button it would turn off.
So I though a factory reset would fix the problem. (volume up + home).
after the reset it still kept turning off randomly.
and now I cant even get it to the normal interface. or get in to the manual reset mode.
Device was previously jail broken, however was returned back to stock and was working fine for 3 months.
I had my otterbox on for every fall my phone had, so I dont think it would be a hardware issue.
the phone was running 4.1.1 I believe.
stock rom.
help please! :C
Click to expand...
Click to collapse
Can you get download mode? (Volume down, HOME and power)
Even though you have a case on it, it sounds like it was probably damaged by one of the falls. Most cases as far as I'm aware mostly protect the display. The shock from impact can still damage internal components, even with a case built with this in mind.
Sent from my SGH-T999L using xda premium
DocHoliday77 said:
Can you get download mode? (Volume down, HOME and power)
Even though you have a case on it, it sounds like it was probably damaged by one of the falls. Most cases as far as I'm aware mostly protect the display. The shock from impact can still damage internal components, even with a case built with this in mind.
Sent from my SGH-T999L using xda premium
Click to expand...
Click to collapse
Hey thanks for replying!
I drained the battery and got a new charge in it and managed to get it booted up
however now the problem of the lock button is still here.
like if i use it to lock my screen it just turns off on me, and it takes multiple times for me to get the phone up and running again.
you could see if you could find a widget or widgets that will basically put a button on your screen that can power off, enable lock screen, reboot recovery/download, etc.
Then just use the HOME button to turn the screen back on.
It sounds to me like a hardware problem, but if you can flash another Rom and do a full wipe/factory reset you'll know for sure.
I hope this helps. Not sure what else you can do besides getting it repaired or replaced unfortunately.
Maybe someone else will have a better idea though.
Sent from my SGH-T999L using xda premium