I'm still some what newby, as much as I don't like to admit it..
I'm not sure what I've done wrong.. I went to restore and clicked on the last file I backed up.. Yet, I'm stuck at checking md5 sums. How long does this usually take? I'm at about 15 minutes of waiting. Is this normal?
It should normally go pretty quickly. Did you edit anything in your backup before you tried to restore it?
Sent from my phone with the geebees
Nope, I didn't change anything.
I've tried from both Clockwork and from Rom Manager. No luck either way.
Have you wipe verything at least twice prier to restoring?
evolishesh said:
Have you wipe verything at least twice prier to restoring?
Click to expand...
Click to collapse
I didn't wipe anything. I'm assuming that's where I messed up?
I've been following http://www.androidpolice.com/2010/0...nandroid-backup-and-clockworkmod-rom-manager/
If that gives you an idea what's I've been doing.
Try that, than report back. use Amo-Ra.
How did you root your phone?
evolishesh said:
How did you root your phone?
Click to expand...
Click to collapse
unrEVOked 3.3
okay. have you flash Amo-ra?
As n00b as it sounds, I don't know how. Do, I go to rom manager flash alternate recovery ra recovery 2.2?
amaffey said:
As n00b as it sounds, I don't know how. Do, I go to rom manager flash alternate recovery ra recovery 2.2?
Click to expand...
Click to collapse
yes. try that and than do nandroid back up.
evolishesh said:
yes. try that and than do nandroid back up.
Click to expand...
Click to collapse
It's telling me before I back up I have to have ClockworkMod Recovery installed before continuing.
On the very top of rom manager, flash ClockworkMod Recovery , than do the amo-ra.
Let me ask this. Do I even need to flash to my stock rom before I flash to a new rom? Currently I'm on Fresh. I want to flash to Vael. Is it required to restore?
No. just make sure to do a nandroid back with Amo-ra and make sure to back up your Wimax image with it. Before flashing do at least wipe everything twice. Data,cach,dalvic.
Related
I just tried flashing the new wimax update and it went through and succeeded, but now my phone reboots after a minute or 2 once it's fully booted. If I'm in recovery mode it doesn't have that problem at all. I'm using baked 1.5.
michaelm718 said:
I just tried flashing the new wimax update and it went through and succeeded, but now my phone reboots after a minute or 2 once it's fully booted. If I'm in recovery mode it doesn't have that problem at all. I'm using baked 1.5.
Click to expand...
Click to collapse
Have you tried the standard "wipe cache and data, then reflash your ROM"?
Noxious Ninja said:
Have you tried the standard "wipe cache and data, then reflash your ROM"?
Click to expand...
Click to collapse
I have re-flashed the wimax radio and wiped the dalvik/regular chache and did a factory reset.
did you wipe? that will solve most of your problems with out the need of a thread being made.
DomSim said:
did you wipe? that will solve most of your problems with out the need of a thread being made.
Click to expand...
Click to collapse
First of all, mods please move my topic to Q&A. I did not mean to post this in this forum. Also yes I've wiped everything about a million times.
michaelm718 said:
First of all, mods please move my topic to Q&A. I did not mean to post this in this forum. Also yes I've wiped everything about a million times.
Click to expand...
Click to collapse
Did you try flashing an older version or a nandroid? If you are using clockwork make sure signature checking is turned on too, you could have a corrupted file.
xHausx said:
Did you try flashing an older version or a nandroid? If you are using clockwork make sure signature checking is turned on too, you could have a corrupted file.
Click to expand...
Click to collapse
I tried flashing an older version and that didn't work either. What is this thing about nandroid? How do I go about that?
Edit: I fixed it by restoring google proprietary stuff(forgot the name) and restored nand. Which one fixed it? I have no idea, but it basically restored me to factory 2.1, but with root access. Mods please lock/ delete this. It's in the wrong forum and I apologize. Thank you
michaelm718 said:
I tried flashing an older version and that didn't work either. What is this thing about nandroid? How do I go about that?
Click to expand...
Click to collapse
A nandroid is a backup of your system you can make from the recovery, it's always a good idea to make one before you flash anything. I'm not sure if that covers your radios though.
Do you use titanium backup or anything? Without knowing how your phone is set up (what recovery you are using, etc) the only thing I can think of would be to flash the engineering bootloader. That should fix it but you would have to reinstall your ROM afterwards.
xHausx said:
A nandroid is a backup of your system you can make from the recovery, it's always a good idea to make one before you flash anything. I'm not sure if that covers your radios though.
Do you use titanium backup or anything? Without knowing how your phone is set up (what recovery you are using, etc) the only thing I can think of would be to flash the engineering bootloader. That should fix it but you would have to reinstall your ROM afterwards.
Click to expand...
Click to collapse
The nandroid restore worked because I had a backup I made while following the guide. I fixed it doing that, but while trying to update the radio to the current one again figuring if it messed up I can restore it and again the same problem came up, but this time nandroid restore wont work and it's telling me to use adb restore, but adb says your device is not found.
BTW all of my phones stuff come directly from the idiot proof guide(recovery etc)
bump... I'm sorry I'm sitting here with a semi broken phone. Is it possible to download someone else's nandroid back up and install it on mine? I know it will fix my problem as it already did, but for some reason now it's telling me to do it with adb, but my usb seems to not be working either.
I want to Nand Backup my DZ.
However when I try to reboot my DZ in Recovery, I get a red Triangle with and exclamation mark in the centre.
What can I do to succeed?
Thanks.
YOSEFE said:
I want to Nand Backup my DZ.
However when I try to reboot my DZ in Recovery, I get a red Triangle with and exclamation mark in the centre.
What can I do to succeed?
Thanks.
Click to expand...
Click to collapse
Are you rooted? Do you have Radio S-OFF?
Bronz_Most said:
Are you rooted? Do you have Radio S-OFF?
Click to expand...
Click to collapse
Yes I am rooted and have S-OFF, plus have hboot-eng.
Sounds like you have the stock recovery. You need to flash clockwork recovery via rom mananger. Then retry.
ostinq said:
Sounds like you have the stock recovery. You need to flash clockwork recovery via rom mananger. Then retry.
Click to expand...
Click to collapse
How do I do that? I do not want to do the wrong thing.
Download "rom mananger" from the market, when it starts up at the top it says "flash recovery". Select your phone, it will install clockworkmod recovery. Then about half way down it says it says "backup current ROM" name it what you want and start.
ostinq said:
Download "rom mananger" from the market, when it starts up at the top it says "flash recovery". Select your phone, it will install clockworkmod recovery. Then about half way down it says it says "backup current ROM" name it what you want and start.
Click to expand...
Click to collapse
Thanks,
I am there.
Is this the same as Nand backup, and does the rom that is backed up stay rooted, or will I need to reroot after restoring the backup?
Thanks.
YOSEFE said:
Thanks,
I am there.
Is this the same as Nand backup, and does the rom that is backed up stay rooted, or will I need to reroot after restoring the backup?
Thanks.
Click to expand...
Click to collapse
It is the same as Nandroid, it backs up your phone, "COMPLETELY", EVERYTHING is backed up, it basically takes an image of your phone and backs it up as IT CURRENTLY IS... then if you need to restore, it'll restore it to EXACTLY as it was when you made the backup.
Nandroiding does not affect your root status, because in order to nandroid, you will likely have root, and therefore, you'll be making a backup of your phone with a rooted status.
stshannon said:
It is the same as Nandroid, it backs up your phone, "COMPLETELY", EVERYTHING is backed up, it basically takes an image of your phone and backs it up as IT CURRENTLY IS... then if you need to restore, it'll restore it to EXACTLY as it was when you made the backup.
Nandroiding does not affect your root status, because in order to nandroid, you will likely have root, and therefore, you'll be making a backup of your phone with a rooted status.
Click to expand...
Click to collapse
Thanks for a thorough response.
We can now consider this SOLVED.
I am trying to get back my original backup and everythime I try it says:
Checking MD5 sums…
Erasing boot before restore…
Restoring boot image…
Error while flashing boot image!
I think my HBOOT isnt the write version but im not sure.
Did you change the name of it and use invalid characters, such as a space? Or seems your backup may be corrupted.
teh roxxorz said:
Did you change the name of it and use invalid characters, such as a space? Or seems your backup may be corrupted.
Click to expand...
Click to collapse
No i didnt change any name and I get alot of Installation Failed from alot of ROMS which I have installed before. SO could someone help me out.
w4rl0 said:
No i didnt change any name and I get alot of Installation Failed from alot of ROMS which I have installed before. SO could someone help me out.
Click to expand...
Click to collapse
What recovery are you currently using? Clockwork? If so, what version?
Well, do you have signature verification off? And what's your bootloader say? Have you switched recoveries in the process?
k2buckley said:
What recovery are you currently using? Clockwork? If so, what version?
Click to expand...
Click to collapse
Clockwork and its 3.0.0.5 I think
teh roxxorz said:
Well, do you have signature verification off? And what's your bootloader say? Have you switched recoveries in the process?
Click to expand...
Click to collapse
Yes they are off, What info do i need form my bootloader, And yes I went from Clock work to the green one that starts with a A then back to Clockwork.
Well thinking back, bootloader wouldn't matter, as long as you're rooted. And well are you trying to restore an amon_ra backup from clockwork?
w4rl0 said:
Clockwork and its 3.0.0.5 I think
Yes they are off, What info do i need form my bootloader, And yes I went from Clock work to the green one that starts with a A then back to Clockwork.
Click to expand...
Click to collapse
You can't switch recoveries like that. The recovery you used to backup is the one you must use to restore. Backup with clockwork you have to use clockwork to restore you can't use RA.
zone23 said:
You can't switch recoveries like that. The recovery you used to backup is the one you must use to restore. Backup with clockwork you have to use clockwork to restore you can't use RA.
Click to expand...
Click to collapse
I redid the whole clockwork is there like a HBOOT I need or something.
w4rl0 said:
I redid the whole clockwork is there like a HBOOT I need or something.
Click to expand...
Click to collapse
No...should have just switched back tot he version of clockwork you used to create the backup.
w4rl0 said:
I redid the whole clockwork is there like a HBOOT I need or something.
Click to expand...
Click to collapse
Not sure I'm following ya but if you want to go back to green aka RA then there is a thread in DEV. on how to do it. The pc36img is the easy way. I think its pc36img any way can't quite remember. You put it on your SD boot to hboot and it will ask if you want to flash it. Basically
http://forum.xda-developers.com/showthread.php?t=705026
I just made a backup and none of them will restore. No matter how old or new
How are you doing it? Are you choosing to install zip from sd card? If so... that wont work. Go into backup and restore and restore from there. Make sure to wipe everything first.
Sent from my PC36100 using XDA Premium App
brownyb601 said:
How are you doing it? Are you choosing to install zip from sd card? If so... that wont work. Go into backup and restore and restore from there. Make sure to wipe everything first.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
I did that, Ill dont know i try and fiure it out.
when restoring nandroid back ups does it have to be with same recovery version i made back up with? i had to unroot my evo from cyanogen mod 7 to take it to sprint. now im trying to restore my evo back to how it was. the nandroid restoring keeps failing. this is the log
clockworkmod recovery v2.6.0.1
checking MD5 sums...
erasing boot image...
restoring boot image...
error while flashing boot image!
i dont remember which version of clockwork i had when i made the back up. what can i do fix this?
Yes, you need to restore the backup with same recovery you used to make it.
teh roxxorz said:
Yes, you need to restore the backup with same recovery you used to make it.
Click to expand...
Click to collapse
thanks for fast reply..
that sucks, is there anyway i can figure out which one i used to make it?
hotboyray said:
thanks for fast reply..
that sucks, is there anyway i can figure out which one i used to make it?
Click to expand...
Click to collapse
On your sd card you will see the folder:
clockwork if cwm recovery was used
and
nandroid if amon_ra recovery was used
teh roxxorz said:
On your sd card you will see the folder:
clockwork if cwm recovery was used
and
nandroid if amon_ra recovery was used
Click to expand...
Click to collapse
i know i used clockwork mod to make the backup. i just dont know which version of clockwork i used to make the back up.
hotboyray said:
i know i used clockwork mod to make the backup. i just dont know which version of clockwork i used to make the back up.
Click to expand...
Click to collapse
Any version of clockwork will be okay.
teh roxxorz said:
Any version of clockwork will be okay.
Click to expand...
Click to collapse
are u sure? why isnt the back up restoring than?
hotboyray said:
i know i used clockwork mod to make the backup. i just dont know which version of clockwork i used to make the back up.
Click to expand...
Click to collapse
maybe you didnt use clockwork.. flash amon_ra recovery and try restore
Only recovery I used for my evo has always been clock work recovery. I used it with rom manager. This sucks.. I had alot of settings I don't want to reconfigure and apps I don't remember.
Sent from my PC36100 using XDA App
hotboyray said:
when restoring nandroid back ups does it have to be with same recovery version i made back up with? i had to unroot my evo from cyanogen mod 7 to take it to sprint. now im trying to restore my evo back to how it was. the nandroid restoring keeps failing. this is the log
clockworkmod recovery v2.6.0.1
checking MD5 sums...
erasing boot image...
restoring boot image...
error while flashing boot image!
i dont remember which version of clockwork i had when i made the back up. what can i do fix this?
Click to expand...
Click to collapse
Not the case for me, I made a backup with the backup/restore feature running ClockWorkMod 2.6.0.1 (somewhere around that version ) and was successfully able to restore it using ClockWorkMod 3.0.0.1.
hotboyray said:
are u sure? why isnt the back up restoring than?
Click to expand...
Click to collapse
1. Has the backup somehow become corrupt?
2. Are you restoring it from a different evo?
Lacedaemon said:
Not the case for me, I made a backup with the backup/restore feature running ClockWorkMod 2.6.0.1 (somewhere around that version ) and was successfully able to restore it using ClockWorkMod 3.0.0.1.
Click to expand...
Click to collapse
any ideas why mine isnt working?
Restoring backup has nothing to do with unrooting anyway. When you run the ruu, its going to wipe everything. And next time, use amon ra
Deck's + SZ + SuperCharger script + ViperMod script.
can you restore a nandroid to a different evo?
lamarcusoliver said:
can you restore a nandroid to a different evo?
Click to expand...
Click to collapse
Technically, yes, but I wouldn't recommend doing so.
teh roxxorz said:
Technically, yes, but I wouldn't recommend doing so.
Click to expand...
Click to collapse
why? they are both the same hardware number.
lamarcusoliver said:
why? they are both the same hardware number.
Click to expand...
Click to collapse
Because the system data will be different, and can and most likely will cause problems.
The best thing too do is backup your launcher settings and apps via titanium, then restore them on the new evo, though when restoring the app, ONLY do apps+data, NOT system settings.
The problem lies within your first post you cannot wipe boot with clockwork. You need to download and flash vrsuperwipe or calkulins format all. Then restore your backup because it is failing to flash your boot.img on top of an unwiped boot.
Sent from my PC36100 using Tapatalk
I'm going to repeat what I just said; it doesn't matter. When you unropot, everything will be wiped anyway. You will loose your data and have no way of getting it back unless you back up apps and texts before running ruu
Deck's + SZ + SuperCharger script + ViperMod script.
Khilbron said:
The problem lies within your first post you cannot wipe boot with clockwork. You need to download and flash vrsuperwipe or calkulins format all. Then restore your backup because it is failing to flash your boot.img on top of an unwiped boot.
Sent from my PC36100 using Tapatalk
Click to expand...
Click to collapse
super wipe failed.. can someone provide link for formatall that works with 2.3 evo
I remember flashing back to stock (unmodified) on the Vibrant through Odin, so is it that easy on the sprint S3? If so where? Could someone link me up? I'd appreciate it. Does it also take my radio back to stock?
Also How do you reset the flash counter in the process?
Thanks in advance.
Penvision66 said:
I remember flashing back to stock (unmodified) on the Vibrant through Odin, so is it that easy on the sprint S3? If so where? Could someone link me up? I'd appreciate it. Does it also take my radio back to stock?
Also How do you reset the flash counter in the process?
Thanks in advance.
Click to expand...
Click to collapse
Also I made a nandroid back up before I started this flashing stuff... Would I just factory/wipe, delete dalvik and wipe cache. nandroid back and its all the same thing as stock, but im rooted and have cwm? if so that seems easier and just as effective plus I wont have to get root or cwm back correct?
Penvision66 said:
I remember flashing back to stock (unmodified) on the Vibrant through Odin, so is it that easy on the sprint S3? If so where? Could someone link me up? I'd appreciate it. Does it also take my radio back to stock?
Also How do you reset the flash counter in the process?
Thanks in advance.
Click to expand...
Click to collapse
You can download a copy of triangle away to reset counter than flash with odin the right tar. would love to link but apparently im too new to the forums
Penvision66 said:
Also I made a nandroid back up before I started this flashing stuff... Would I just factory/wipe, delete dalvik and wipe cache. nandroid back and its all the same thing as stock, but im rooted and have cwm? if so that seems easier and just as effective plus I wont have to get root or cwm back correct?
Click to expand...
Click to collapse
Yes if you made a backup, you can restore that backup and you'd be on stock and rooted. I don't think you have to wipe anything to restore a backup though
Lolanerd said:
Yes if you made a backup, you can restore that backup and you'd be on stock and rooted. I don't think you have to wipe anything to restore a backup though
Click to expand...
Click to collapse
I tried that and it said I had no files lol? Went thru CWM backup, picked the file and i got (no files) lol...