Recently got the jabra bt3030 to use in the car.
I'm able to pair and connect it with the evo initially. However after turning off either the BT in the evo, or powering the bt3030 off, it doesn't reestablish connection upon power up of both devices.
I'm running the rom in the sig. I'm not all that familiar with BT devices, but would think if the pairing has been previously defined, when both are power on and within range, they would automatically reconnect.
I must be overlooking something?
Thanks!
Anyone? Bump
Related
on the edge of updating to froyo at the moment but might wait a week or two for the little problems to get ironed out..
just wondered though if they have improved the Bluetooth on the phone ?
I have heard a few people having problems with the HTC implementation of it and have myself a device with pairs but does not connect
thanks
mitch
hi mitch,
bluetooth issues are still there after official htc 2.2 froyo update.
I have a Logitech diNovoMini keyboard that can pair but not connect to my desire.
htc broke the damn thing...
Bluetooth woes
I have just bought a Linx B-Tube. It should function as a bluetooth headset (only it has a speaker). I was hoping to pair it with my Desire which was running Cyanogenmod RC1. I couldn't get it to pair so I decided to make the leap to the nightly to see if it made any difference....nope!
I can see the device and I am prompted for a passcode for connecting. When I enter the code it just goes back to the original screen and doesn't pair.
I have also tried pairing to my MacBook pro with the same result..
Any solutions would be much appreciated
I have a Vodafone unbranded HTC Desire running Froyo, and I have a similar bluetooth problem. It really sucks. My Plantronic bluetooth headset can pair and connect with the phone without any problem. The connection is fine and will automatically be re-established if the headset is in range. However, occasionally, yes, occasionally, the headset will be detected and connected, but can NOT be used. I can see the icon that shows that the bluetooth headset is connected. However, clearly the phone voice output is for whatever reason NOT routed to the bluetooth headset, and hence I can't talk using the headset. I found that once I got this issue, the only way to solve it is to unpair and re-pair the bluetooth headset.
Very annoying. These days software quality control is very poor.
Hi my problem is different. both with Android 2.1 and 2.2 my bluetooth headset (Blueant Q1) works fine except when the Wifi Connects to a new hotspot. When this happens teh bluetooth headset discoinnects and then reconnects : (
Maybe I should be happy it works most of the time listening to previous posters !
Is any one with problem for the bluetooth connetion? It will drop after a few min. and try to reconnect have no respond, need to reboot the phone. Is it the setting or bug?
andych888 said:
Is any one with problem for the bluetooth connetion? It will drop after a few min. and try to reconnect have no respond, need to reboot the phone. Is it the setting or bug?
Click to expand...
Click to collapse
Mine has not done this with my Jawbone Icon, Motorola S10-HD stereo headphones or my Volkswagen Tiguan. Perhaps you might try another bluetooth device?
buletooth issue?
I had try different device and do the same thing, like my audi q7 and jarba headset and the garmin. Can you tell me what buletooth setting you are using?
Mine has intermittent issues as well, I'm using an older Motorola 710 BT earpiece. I'll only turn on BT on the phone when I know I'm going to use the earpiece, such as when driving or needing to be hands-free. I only activate the earpiece after enabling BT on the phone, but there are times when the earpiece does not connect.... the only fix is to reboot the phone. Is that similar to the issue you are having?
I'm having issues connecting to my car. If I reboot the phone and connect it will work. But once it's disconnected and I turn bluetooth off and then back on from the phone, it will not connect. Only way to fix it is to reboot. Don't know how to fix the issue. Never had a problem connecting my Sensation to my car's bluetooth.
My issue is similar in turning bluetooth on and off via the power widget and not being able to re-connect to my bluetooth earpiece after a few cycles. I'm wondering if it may be an issue with it being BT 2.0 versus BT 3.0 on the phone?
I thought it was my car but a lot ppl is having this issue too.
Sometimes it wont connect but it says connected so i have to go to BT settings and click where it says connected n overwrite the connection for it to work if not gotta restart the phone. :/
Tmo Galaxy S2
I'm having problems with a SoundFly FM Transmitter in my car.
At first it took forever to pair. And even when paired & connected it's really glitchy.
I'm using this mainly for GPS turn by turn over the car sound system. But because it is glitchy I can't use it because some of the directions get cut off.
I had a MyTouch 4G before. No problems whatsoever. I don't if it's a hardware or driver or BT device issue.
I'm willing to get a new FM Transmitter but not if it does the same thing.
It didn't work well on stock or rooted w/ Juggernaut rom
this is quite annoying. I wonder why this topic died so quickly, there have to be more people with this problem? Maybe has something to do with a bluetooth power saving sleep feature? Streaming music, pause music for a few minutes, incoming call gets connected but I get no sound through headset.
I have used my SGS3 for a while now with the built-in bluetooth phone connection in my car. The first time I used it I had to go through the pairing process, ever since then it automatically connects as soon as I turn on the car. I don't have to touch anything, as long as I have bluetooth turned on it connects.
So, I added a Logitech bluetooth audio receiver to the car http://www.amazon.com/Logitech-Wireless-Speaker-Bluetooth-980-000540/dp/B004VM1T5S
This unit paired with the phone fine, and remembers the pairing. Only problem is every time I turn it on, I have to go to the bluetooth menu on the phone and tap the entry for the logitech adapter to get it to connect. It's a few more steps that I'd like to make this work.
Can anyone suggest a way to my phone to auto connect this pairing?
I know it's uncool to bump your own post, but really........nobody?
Really unsure but try deleting the device from your phone reboot and pair again. All I can think of.
Transmitted with a portable device using Xparent Blue Tapatalk 2
I have the same problem and I have not been able to solve the problem. I am using a Blackberry Bluetooth Stereo Gateway. It would auto connect just fin to my Evo 4G. It will not auto connect on the SIII. If I look at the Bluetooth settings I will see it briefly show Connecting before dropping off when I power up the gateway. It has been this way since I got the SIII. I have only tried the stock ROMs. I am thinking about trying an AOSP ROM to see if it makes a difference.
Curious if anyone would have any insight...
I hadn't used bluetooth too much, but I occasionally used it with my Pioneer car stereo. I know that CM10.1 had some issues with bluetooth, so I figured that was the reason it worked intermittently. I purchased a different car stereo, and couldn't get my Epic to pair with it. Basically it would see the car stereo, start to pair, let me enter the passkey, then bluetooth would turn off, then back on and it will keep doing this. So...I wiped everything and installed CM11, which I thought (and heard) would have much better bluetooth. But I'm having the same exact problem. At first it was saying that my passkey was wrong as it would turn off, or I might get a bluetooth process force closing, but it always ends up turning bluetooth off, then back on again as it tries to pair. I also tried pairing it with a bluetooth HMDX speaker, and the same exact thing happens. Just wondering if anyone might have a few tips on what to check out instead of going back to stock.
Ad1982 said:
Curious if anyone would have any insight...
I hadn't used bluetooth too much, but I occasionally used it with my Pioneer car stereo. I know that CM10.1 had some issues with bluetooth, so I figured that was the reason it worked intermittently. I purchased a different car stereo, and couldn't get my Epic to pair with it. Basically it would see the car stereo, start to pair, let me enter the passkey, then bluetooth would turn off, then back on and it will keep doing this. So...I wiped everything and installed CM11, which I thought (and heard) would have much better bluetooth. But I'm having the same exact problem. At first it was saying that my passkey was wrong as it would turn off, or I might get a bluetooth process force closing, but it always ends up turning bluetooth off, then back on again as it tries to pair. I also tried pairing it with a bluetooth HMDX speaker, and the same exact thing happens. Just wondering if anyone might have a few tips on what to check out instead of going back to stock.
Click to expand...
Click to collapse
I too have been having a very similar problem with with my plantronics headset, and Panasonic Bluetooth cordless phone. My Nexus 4 will continue to disconnect and reconnect, have tried to pairing the devices again with no luck. tried a few nightlies of late with no luck yet.
jeffreytj said:
I too have been having a very similar problem with with my plantronics headset, and Panasonic Bluetooth cordless phone. My Nexus 4 will continue to disconnect and reconnect, have tried to pairing the devices again with no luck. tried a few nightlies of late with no luck yet.
Click to expand...
Click to collapse
I have a 2014 Mazda CX-5 and a Samsung S3 and I'm having the same issue.
The odds part is that I have no problem connecting and staying connected to my pebble smart watch.
Hello, I am getting weird problem when using bluetooth devices with my HTC 10 (stock rom)
I bought a bluetooth device with aux-in for my car radio.. That way I only enable BT on my phone and devices connect without problems.
But I also have a small Bluetooth speaker I use when I renovate the apartment (JBL GO).
The problem is when I paired car bluetooth device so it can connect automatically and after that also connected bluetooth speaker this one does not want to connect. If I unpair car bluetooth device, the speaker connect normally.. also if speaker connect and I come down to my car and try to pair to car bluetooth device, it doesnt want to connect/pair... Again if I remove BT speaker from paired devices, car bluetooth device connect normally...
Why is that, anyone knows a solution? Why can I have only one BT device paired with my phone?
Thank you for answers
i have this problem too.
Had this problem myself.
Updated to the latest firmware, rom and kernel.
Currently using cleanslate.
Turn on the BT device, make sure no other BT devices are in the near radius which may confuse it, no wireless devices (I know hard in this day and age)
Turn on BT on your phone, hold it up clearly (not laying down) close all apps, and open the Bluetooth menu.
Click the Bluetooth device to make sure it's ready to pair. Then scan on the phone.
Should start picking it up.
Repeating this and turning the BT device on and off periodically, allowing for several attempts at a time before switching off..
Even really it'll work, perhaps a different rom or kernel combination may help..
I have had this problem, once connected it'll always work and work well. It's odd
Same issue somewhat..I really want to keep this device...i dooooont want to go back to the s7. But on the S7, i could have my Gear S2, Sync and LG Tone all paired at the same time...If i got a call they would all ring and i could answer on whatever device...now if i have the LG on, sync wont find the device. or the phone wont allow for sync to use the Phone, because the S2 is using that feature...what gives? just me?
CrazyCypher said:
Hello, I am getting weird problem when using bluetooth devices with my HTC 10 (stock rom)
I bought a bluetooth device with aux-in for my car radio.. That way I only enable BT on my phone and devices connect without problems.
But I also have a small Bluetooth speaker I use when I renovate the apartment (JBL GO).
The problem is when I paired car bluetooth device so it can connect automatically and after that also connected bluetooth speaker this one does not want to connect. If I unpair car bluetooth device, the speaker connect normally.. also if speaker connect and I come down to my car and try to pair to car bluetooth device, it doesnt want to connect/pair... Again if I remove BT speaker from paired devices, car bluetooth device connect normally...
Why is that, anyone knows a solution? Why can I have only one BT device paired with my phone?
Thank you for answers
Click to expand...
Click to collapse
Do you have another device to try it with? i have had a similar problem, but its just my terrible bluetooth rockford deck causing me grief, and an ebay pill. But it did it with a lg g3 and xperia phone as well. so i chalked it to that
Seems like HTC only allows one bluetooth profile at a time. Like it will only allow one device to use the phone profile or one device use the media profile.
I have to turn off my tone for Sync to connect. Sucks.
I've had this problem since purchasing the HTC 10 about a month ago. My Bluetooth earphones work without issue, but I've been unable to connect to my car or portable speakers (pairs but never connects).
After reading this thread, I unpaired the earphones, cleared all devices, and I was finally able to connect to my portable speaker. So glad I found this topic.
Still, I'm hoping for a fix. I don't want to bother with pairing and unpairing just to connect to a different Bluetooth device.
Similar problem
Hello !
I am having a similar issue!
I have been trying to register and pair my phone with my car's Bluetooth.
Every time I try to pair with my car an error message pops up saying "couldn't pair with Hands Free System because of an incorrect PIN or passkey" except it never even prompted me to enter the passkey...
Things I have already tried:
Resetting network settings
rebooting phone
Factory reset phone
Also , I do not have any other devices paired with my phone.
Any suggestions??
AmandaLS1991 said:
Hello !
I am having a similar issue!
I have been trying to register and pair my phone with my car's Bluetooth.
Every time I try to pair with my car an error message pops up saying "couldn't pair with Hands Free System because of an incorrect PIN or passkey" except it never even prompted me to enter the passkey...
Things I have already tried:
Resetting network settings
rebooting phone
Factory reset phone
Also , I do not have any other devices paired with my phone.
Any suggestions??
Click to expand...
Click to collapse
Had exactly the same problem htc10 would not pair with car bt. changed my passkey on car to 0000 still a valid code and phone paired straight away It was driving me insane trying to make it work. Worth a punt if you can change passkey
hamish707 said:
Had exactly the same problem htc10 would not pair with car bt. changed my passkey on car to 0000 still a valid code and phone paired straight away It was driving me insane trying to make it work. Worth a punt if you can change passkey
Click to expand...
Click to collapse
Thank you, I will give that a shot!