Develop Bugs

a cooking question

I just started cooking my own roms and want to know how to change the circled items in the pictures. Thanks, LuXx

LuXx said:
I just started cooking my own roms and want to know how to change the circled items in the pictures. Thanks, LuXx
Click to expand...
Click to collapse
Edit the registry key:
HKLM\System\State\Phone\Current Operator Name
Enjoy!

TaurusBullba said:
Edit the registry key:
HKLM\System\State\Phone\Current Operator Name
Enjoy!
Click to expand...
Click to collapse
Thank you so much on the first 2 pictures! Does anyone else know how to change the rom version description?

Oops, didn't look at the last picture. Same deal. Open up the registry and edit:
HKLM\Software\OEM - ROMVersion

TaurusBullba said:
Oops, didn't look at the last picture. Same deal. Open up the registry and edit:
HKLM\Software\OEM - ROMVersion
Click to expand...
Click to collapse
You are the man!!!!!

I must be tired. I forgot to also mention to soft-reset immediately following changing the carrier name. If you don't, it will revert back to the original.

TaurusBullba said:
I must be tired. I forgot to also mention to soft-reset immediately following changing the carrier name. If you don't, it will revert back to the original.
Click to expand...
Click to collapse
Found the string on my phone but everthing i try will not make it stay. I,ve tried to soft reset hold the power button and turn back on but with the XDA AT&T back. I was trying to find that string in the default.hv file but its not in there. This is the only thing close to that string =
[HKEY_LOCAL_MACHINE\System\State\Phone]
"Phone Status Flags"=dword:10
Is there another way to change while i'm making a rom?

LuXx said:
Found the string on my phone but everthing i try will not make it stay. I,ve tried to soft reset hold the power button and turn back on but with the XDA AT&T back. I was trying to find that string in the default.hv file but its not in there. This is the only thing close to that string =
[HKEY_LOCAL_MACHINE\System\State\Phone]
"Phone Status Flags"=dword:10
Is there another way to change while i'm making a rom?
Click to expand...
Click to collapse
Its there. Dont click on any subfolders under OEM, click on that folder itself.

mcorrie1121 said:
Its there. Dont click on any subfolders under OEM, click on that folder itself.
Click to expand...
Click to collapse
I see it in the reg on the pda but i dont see it in the default.hv file.

ok found out where I can change the XDA part of the current operators name.
HKLM\software\oem\phonesettings\longnameprefix or you can disable the XDA part by changing 1 to a 0 decimal on enable3glongnameprefix.

I do not know of this what you want, but you may be looking for this "HKLM\SOFTWARE\Microsoft\RIL\OperatorNames" where you want to add a key (string) with your operator code (i.e. "22601"="My network").
Some codes I found here:
http://www.firstphoneshop.co.uk/mob...ra-information---service-provider-codes.shtml
In my case I use:
<!-- Network custom name -->
<characteristic type="HKLM\SOFTWARE\Microsoft\RIL\OperatorNames">
<parm name="22601" value="Vodafone RO" datatype="string" />
</characteristic>
cheers,
dan

dan1967 said:
I do not know of this what you want, but you may be looking for this "HKLM\SOFTWARE\Microsoft\RIL\OperatorNames" where you want to add a key (string) with your operator code (i.e. "22601"="My network").
Some codes I found here:
http://www.firstphoneshop.co.uk/mob...ra-information---service-provider-codes.shtml
In my case I use:
<!-- Network custom name -->
<characteristic type="HKLM\SOFTWARE\Microsoft\RIL\OperatorNames">
<parm name="22601" value="Vodafone RO" datatype="string" />
</characteristic>
cheers,
dan
Click to expand...
Click to collapse
Hey!
This doesn't seem to work...

[Free App] CabGen - easily create .cab from wap-provisioningdoc

I'd like to announce a FREE webapp that I've just created, CabGen. It allows you to quickly and easily convert your <wap-provisioningdoc> xml configuration file into an installable .cab file. I wanted this functionality for my own apps, so I decided to make it a little more generic and give it to the community! If you don't know what wap-provisioningdoc means, then this probably isn't for you but for those of you who know what it means, I hope this is helpful!
http://supware.net/CabGen

supbro said:
I'd like to announce a FREE webapp that I've just created, CabGen. It allows you to quickly and easily convert your <wap-provisioningdoc> xml configuration file into an installable .cab file. I wanted this functionality for my own apps, so I decided to make it a little more generic and give it to the community! If you don't know what wap-provisioningdoc means, then this probably isn't for you but for those of you who know what it means, I hope this is helpful!
http://supware.net/CabGen
Click to expand...
Click to collapse
A great tool for linux & mac folks ... I think that makecab.exe is available, if not included in Windows XP (Pro?).
Code:
makecab _setup.xml RegEdits.cab
Thanks for sharing.
Best regards,
-boggsie

boggsie said:
A great tool for linux & mac folks ... I think that makecab.exe is available, if not included in Windows XP (Pro?).
Code:
makecab _setup.xml RegEdits.cab
Thanks for sharing.
Best regards,
-boggsie
Click to expand...
Click to collapse
... and for people who are scared of the cmd prompt

+1 great tool,
esay create cab
thank you supbro

supbro said:
I'd like to announce a FREE webapp that I've just created, CabGen. It allows you to quickly and easily convert your <wap-provisioningdoc> xml configuration file into an installable .cab file. I wanted this functionality for my own apps, so I decided to make it a little more generic and give it to the community! If you don't know what wap-provisioningdoc means, then this probably isn't for you but for those of you who know what it means, I hope this is helpful!
http://supware.net/CabGen
Click to expand...
Click to collapse
I've tested the online tool and got error message:
Fatal error: Maximum execution time of 30 seconds exceeded in /users/supbro.com/htdocs/supware.net/CabGen/MakeCAB.class on line 465

jwoegerbauer said:
I've tested the online tool and got error message:
Fatal error: Maximum execution time of 30 seconds exceeded in /users/supbro.com/htdocs/supware.net/CabGen/MakeCAB.class on line 465
Click to expand...
Click to collapse
Interesting, is your xml lengthy? I just tried it again without a problem. Maybe it was a one-time hiccup?

The .xml-file i tried to convert to .cab-file is of 159KB size:
http://www.mediafire.com/file/4wnmyenizjy/WMP9.reg.xml

jwoegerbauer said:
The .xml-file i tried to convert to .cab-file is of 159KB size:
http://www.mediafire.com/file/4wnmyenizjy/WMP9.reg.xml
Click to expand...
Click to collapse
That certainly should be small enough. It seems that the MakeCab.class php file I'm using must have an infinite loop somewhere. If you're interested in trying to fix it, it's here:
http://supware.net/CabGen/MakeCAB.class

Thanks!
supbro said:
I'd like to announce a FREE webapp that I've just created, CabGen. It allows you to quickly and easily convert your <wap-provisioningdoc> xml configuration file into an installable .cab file. I wanted this functionality for my own apps, so I decided to make it a little more generic and give it to the community! If you don't know what wap-provisioningdoc means, then this probably isn't for you but for those of you who know what it means, I hope this is helpful!
http://supware.net/CabGen
Click to expand...
Click to collapse
Thanks so much for this - it's awesome!!!

yvettejudd said:
Thanks so much for this - it's awesome!!!
Click to expand...
Click to collapse
Glad someone finds it useful

How i can generate a cab with this xml/reg:
Code:
<wap-provisioningdoc>
<characteristic type="Registry">
<characteristic type="HKLM\Software\Microsoft\CHome" translation="filesystem">
<parm name="DefaultXML" datatype="string" value="<Plugins Order=\CMyPhotos;CMusic;CPhone;CVoicemail;CClock;CText;CEmail;CAppointments\ CPRFileName=\Titanium\ DisplayStyle=\Titanium\ />"/>
<parm name="ExtensibilityXML" datatype="string" value="<Plugins Order=\CMyPhotos;CMusic;CPhone;CVoicemail;CClock;CText;CEmail;CAppointments\ CPRFileName=\Titanium\ DisplayStyle=\Titanium\ />"/>
</characteristic>
</characteristic>
</wap-provisioningdoc>
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\Software\Microsoft\CHome]
"DefaultXML"="<Plugins Order=\"CMyPhotos;CMusic;CPhone;CVoicemail;CClock;CText;CEmail;CAppointments\" CPRFileName=\"Titanium\" DisplayStyle=\"Titanium\" />"
"ExtensibilityXML"="<Plugins Order=\"CMyPhotos;CMusic;CPhone;CVoicemail;CClock;CText;CEmail;CAppointments\" CPRFileName=\"Titanium\" DisplayStyle=\"Titanium\" />"
that cointains double quotes? I tried """ but it didn't work...thanks!
edit: SOLVED USING single quote enclosure for value

[App][WM6.5] CHome Visual Editor - compatible with all kinds of CPR

[31/08/2009] New release is avaliable, you can download the new verison from: http://cve.codeplex.com/Release/ProjectReleases.aspx?ReleaseId=32228
CHome Visual Editor is a visual CPR editor for Windows Mobile 6.5.
** You need install .net 3.5 sp1 in your computer in order to run CVE. **
With CVE, you can edit:
Titanium
LS_AlarmScene
LS_LockScene
LS_PhoneAlertScene
LS_PhoneCallScene
LS_SimplePinScene
StartMenu_GridScene
For this release, you can:
Open CPR file visually and move elements visually.
Modify all properties of the selected element by the property grid on the right side.
Change & Save (auto) the screen resolution.
Change & Save (auto) the scale rate.
Undo/Redo
Setup folder mapping between PPC and your OS.
Import registry file to load the element values (text, image source)
Save the modification.
More functions not listed.
This release only provide two language resource. The embedded language is Chinese, en-US is provided. If your OS language is not en-US, you may need to open configuration.xml and add one line to display en-US:
<language>en-us</language>
or you will get Chinese character.

wow.. looks like very good application
downloading & trying it now!!!!

Looks good indeed! Just downloaded but I can't try it now...

Got some problem here, I can't open any .cpr file to edit???

morningmoon said:
Got some problem here, I can't open any .cpr file to edit???
Click to expand...
Click to collapse
do you mean the application crash when you open *.cpr? can you upload error.log file here under CVE folder? it's all about the exceptions, none private will recorded in this file.

<?xml version="1.0"?>
<configuration xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<scale>1</scale>
<language>en-us</language>
<resolution>
<Width>240</Width>
<Height>320</Height>
</resolution>
<directory name="\Windows">
<mapping>Windows</mapping>
<mapping>E:\WindowsMobile\i780_21501_Kitchen\SYS\Lockscreen_DPI_96</mapping>
</directory>
<directory name="\Program Files">
<mapping>Program Files</mapping>
</directory>
</configuration>
Click to expand...
Click to collapse
Placed the language line in like above. But still no English.
Is there some thing we need to do more.

ebsbow said:
Placed the language line in like above. But still no English.
Is there some thing we need to do more.
Click to expand...
Click to collapse
This is strange, i copied your configuration and tested it in my comupoter, it works fine.
If you opened CVE and close it normally (the configuration will be saved again while cloing), the configuration should not not looks like your posted. the lanuguage should be the first element of configuration node. It may caused by path you placed CVE or permission issue.

JerryJiang said:
do you mean the application crash when you open *.cpr? can you upload error.log file here under CVE folder? it's all about the exceptions, none private will recorded in this file.
Click to expand...
Click to collapse
No. not crash, just can't get the Open File box to display, so I can't choose any file to open???

morningmoon said:
No. not crash, just can't get the Open File box to display, so I can't choose any file to open???
Click to expand...
Click to collapse
I never wrap the open file dialog. The open file dialog i am using is system provided, do you have any other WPF application in your computer that with a open file feature, if so, can you tested it whether it works fine?

error
Opening any CPR file the application is crashing. I am uploading the error log file. Please look and give a resolution.

Copied the "<language>en-us</language>" just below the configuration tag. But the problem is still the same.
All is in Chinees. is there anything else I need to check?
I have added the last error log.

ajeshm said:
Opening any CPR file the application is crashing. I am uploading the error log file. Please look and give a resolution.
Click to expand...
Click to collapse
The exception is caused by some color string of TextStage element in your CPR file, normally, i define the color in CPR file use the #FFxxxxxx pattern.
it seems that the color definition between WM and WPF have inconsistent rules. So can you look through the CPR file and try to find out whether there is any color definition in <TextStage/> section is not follow the rule?
I will update my code to fix the problem if you can kindlly post the inconsistant rule. Thx.

ebsbow said:
Copied the "<language>en-us</language>" just below the configuration tag. But the problem is still the same.
All is in Chinees. is there anything else I need to check?
I have added the last error log.
Click to expand...
Click to collapse
<?xml version="1.0"?>
<configuration xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<language>en-US</language>
<enable_effect>true</enable_effect>
<scale>1</scale>
<resolution>
<Width>240</Width>
<Height>320</Height>
</resolution>
<directory name="\Windows">
<mapping>Windows</mapping>
</directory>
<directory name="\Program Files">
<mapping>Program Files</mapping>
</directory>
</configuration>

karim_31 said:
<?xml version="1.0"?>
<configuration xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<language>en-US</language>
<enable_effect>true</enable_effect>
<scale>1</scale>
<resolution>
<Width>240</Width>
<Height>320</Height>
</resolution>
<directory name="\Windows">
<mapping>Windows</mapping>
</directory>
<directory name="\Program Files">
<mapping>Program Files</mapping>
</directory>
</configuration>
Click to expand...
Click to collapse
Thanks for posting your configuration. I should update my build package to include the language element instead of let the users update the xml by themselves.
ebsbow said:
Copied the "<language>en-us</language>" just below the configuration tag. But the problem is still the same.
All is in Chinees. is there anything else I need to check?
I have added the last error log.
Click to expand...
Click to collapse
Could you please try again with karim_31's configuration?

Unfortunately I don't have one. Still can't use this application
Any suggestion? What do I need to install for the open file to work?
Thanks!
JerryJiang said:
I never wrap the open file dialog. The open file dialog i am using is system provided, do you have any other WPF application in your computer that with a open file feature, if so, can you tested it whether it works fine?
Click to expand...
Click to collapse

The language works now,
Thanks, but the app seems to crash a lot when loading an cpr.
Disabling effects helps, but the apps crashes on other actions as well.

ebsbow said:
The language works now,
Thanks, but the app seems to crash a lot when loading an cpr.
Disabling effects helps, but the apps crashes on other actions as well.
Click to expand...
Click to collapse
Can you upload your error.log so that i can do some analysis to improve the quality of the application.

Sure. Here you go.

ebsbow said:
Sure. Here you go.
Click to expand...
Click to collapse
It's caused by color token:
http://forum.xda-developers.com/showpost.php?p=3952898&postcount=12
i will add more check of the token, by unless i get the inconsistant token, the color may not display correctly.

I cant even launch it
No error log... so where do i need to install all the files? it simply says that the app fails... thats all!
what im a doing wrong?
I set all in C:\ and the stwater added to windows directory

Navigon is up and running!

Guys,
I got Navigon 7.3.4 (build-793) running!
480x320 Version is here:
http://www.digital-eliteboard.com/showthread.php?t=85970
Before installing change a view things:
NavLoader.cfg:
ShellPath with your Storage-Card Path
ApplicationSettingsPathes.xml:
Insert your correct Storage-Card Path everywhere
BinaryConfig.xml:
In 480x320 section:
<Resolution>480x320</Resolution>
<ImagesXMLPath>ini_files/images/MN_Images_320x240.dat</ImagesXMLPath>
<GUIXMLPath>ini_files/320x240/</GUIXMLPath>
<PropXMLPath>ini_files/properties/MN_Prop.dat</PropXMLPath>
<FontsXMLPath>ini_files/fonts/MN_Fonts_VGA.dat</FontsXMLPath>
<SoundsXMLPath>ini_files/sounds/MN_Sounds.dat</SoundsXMLPath>
<GUIScaleXFactor>1.5</GUIScaleXFactor>
<GUIScaleYFactor>1.33</GUIScaleYFactor>
<GUIScaleImageXFactor>1.5</GUIScaleImageXFactor>
<GUIScaleImageYFactor>1.33</GUIScaleImageYFactor>
<GUIFontScaleFactor>0.9</GUIFontScaleFactor>
<PictureAnimatorPath>ini_files/320x240/</PictureAnimatorPath>
Maps Q2 2010 are running! Even with TTS!
During a short trip this morning everything works fine - no errors, smooth scrolling, GPS very (very) accurate.
Have fun with it,
Marti

mrmartischmi said:
Guys,
I got Navigon 7.3.4 (build-793) running!
480x320 Version is here:
http://www.digital-eliteboard.com/showthread.php?t=85970
Before installing change a view things:
NavLoader.cfg:
ShellPath with your Storage-Card Path
ApplicationSettingsPathes.xml:
Insert your correct Storage-Card Path everywhere
BinaryConfig.xml:
In 480x320 section:
<Resolution>480x320</Resolution>
<ImagesXMLPath>ini_files/images/MN_Images_320x240.dat</ImagesXMLPath>
<GUIXMLPath>ini_files/320x240/</GUIXMLPath>
<PropXMLPath>ini_files/properties/MN_Prop.dat</PropXMLPath>
<FontsXMLPath>ini_files/fonts/MN_Fonts_VGA.dat</FontsXMLPath>
<SoundsXMLPath>ini_files/sounds/MN_Sounds.dat</SoundsXMLPath>
<GUIScaleXFactor>1.5</GUIScaleXFactor>
<GUIScaleYFactor>1.33</GUIScaleYFactor>
<GUIScaleImageXFactor>1.5</GUIScaleImageXFactor>
<GUIScaleImageYFactor>1.33</GUIScaleImageYFactor>
<GUIFontScaleFactor>0.9</GUIFontScaleFactor>
<PictureAnimatorPath>ini_files/320x240/</PictureAnimatorPath>
Maps Q2 2010 are running! Even with TTS!
During a short trip this morning everything works fine - no errors, smooth scrolling, GPS very (very) accurate.
Have fun with it,
Marti
Click to expand...
Click to collapse
Thank you, but could you upload a zip file somewhere else so I dont have to register, I am not so good at german. ;-)

dontomase said:
Thank you, but could you upload a zip file somewhere else so I dont have to register, I am not so good at german. ;-)
Click to expand...
Click to collapse
why dont u just use google translate? I tried for fun and it took me 10mins to reg and get to the link but sadly m not in USA to make use of this software....

This is the best navigating soft on the market, trust me.
Even maps for Australia are available!

Display always landscape??
it doesn´t work correct - i always get landscape in portrait mode. So I can´t see the whole screen?
How can I change this behaviour?
THX

Re: Display always landscape??
There is a NavLoader.cfg in the Navigon Dir.
Look at the "RotateSCR" keyword.
Is it set to 4 (=270 deg)?

I cant get this to work.
It starts and says something about no map and den the screen goes in landsacape and is black. In the background I can see that the program is started but I cant do anything except remove the battery.
Now I have made one progress, it starts shows the startup screen fine and then the menu blinks and the program stops.

dontomase said:
I cant get this to work.
It starts and says something about no map and den the screen goes in landsacape and is black. In the background I can see that the program is started but I cant do anything except remove the battery.
Now I have made one progress, it starts shows the startup screen fine and then the menu blinks and the program stops.
Click to expand...
Click to collapse
Read my first post carefully...
Have you changed these 3 files as described?
- NavLoader.cfg
- ApplicationSettingsPathes.xml
- BinaryConfig.xml
That was all I did and it worked like a charm...

mrmartischmi said:
Read my first post carefully...
Have you changed these 3 files as described?
- NavLoader.cfg
- ApplicationSettingsPathes.xml
- BinaryConfig.xml
That was all I did and it worked like a charm...
Click to expand...
Click to collapse
Yes, I think I got it right, should I change every file tag to my storage path?
I think I have missed something in my ApplicationSettingsPathes.xml because I have tried with the original binaryconfig file and then the graphics is to small. And on my first try I had missed a trailing / in the navloader.cfg, and got another error.
Can you post your ApplicationSettingsPathes.xml here please.

ApplicationSettingsPathes.xml
<?xml version='1.0' encoding='ISO-8859-1'?>
<Settings>
<Product>MN</Product>
<Version>7.0</Version>
<!-- path to *.default settings and files which will be not written by the application -->
<FactorySettings ID="CE">./Settings</FactorySettings>
<FactorySettings ID="WIN">./Settings</FactorySettings>
<!-- path to the settings files which can be edited by the user -->
<UserSettings ID="CE">./Settings</UserSettings>
<UserSettings ID="WIN">./Settings</UserSettings>
<!-- path to the user data xml file -->
<UserData ID="CE">./Settings</UserData>
<UserData ID="WIN">./Settings</UserData>
<!-- path to sextant configfiles -->
<SextantConfigFiles ID="CE">./Settings/Core</SextantConfigFiles>
<SextantConfigFiles ID="WIN">./Settings/Core</SextantConfigFiles>
<DataFiles ID="CE">./Dat</DataFiles>
<ETA>./Settings/</ETA>
<Language ID="CE">./language_files/</Language>
<Language ID="WIN">./language_files/</Language>
<Map>
<Path>./map</Path>
<Path>/Speicherkarte/NAVIGON/map</Path>
</Map>
<Overmap>
<Path>./POI</Path>
<Path>/Speicherkarte/NAVIGON/POI</Path>
</Overmap>
<MapStyles>./MapStyles</MapStyles>
<Sound>
<Path>./Sounds</Path>
<Path>/Speicherkarte/NAVIGON/Sounds</Path>
</Sound>
<VersionInfo>
<Path>./</Path>
</VersionInfo>
<KeyStorage>./</KeyStorage>
<Favorites>./Favorites/Favorites.store</Favorites>
<RecentTargets>./Favorites/RecentTargets.store</RecentTargets>
<Routes>
<Path User="writable">/Speicherkarte/NAVIGON/Routes</Path>
<Path>/My Flash Disk/NAVIGON/Routes</Path>
<Path>./ExampleRoutes</Path>
</Routes>
<LogBook>
<Path>./LogBook/</Path>
<MN7File>LogBook.xls</MN7File>
</LogBook>
<VoiceRecognition>
<Path>./VoiceRecognition</Path>
<SessionPath>./VoiceRecognition</SessionPath>
</VoiceRecognition>
<OutloookContacts>
<Path>./Contacts/contacts.txt</Path>
<Path>./Contacts/freshcontacts.txt</Path>
</OutloookContacts>
<DemoPlayer>
<Screen Res="320x240">./demo/PlayerDataLandscape.nfs</Screen>
<Screen Res="240x320">./demo/PlayerDataPortrait.nfs</Screen>
<Screen Res="320x480">./demo/PlayerDataLandscape.nfs</Screen>
<Screen Res="480x272">./demo/PlayerDataWidescreen.nfs</Screen>
<Screen Res="480x320">./demo/PlayerDataWidescreen.nfs</Screen>
</DemoPlayer>
<LogPath>
<GPS ID="CE">/Speicherkarte/Navigon/SimulationFiles/GPS</GPS>
<TMC ID="CE">/Speicherkarte/Navigon/SimulationFiles/TMC</TMC>
<Tuner ID="CE">/Speicherkarte/Navigon/SimulationFiles</Tuner>
</LogPath>
<RoutingFiles>./Settings/Routing/</RoutingFiles>
<RESY>./Settings</RESY>
<AutoZoom>./Settings/autozoom.ini</AutoZoom>
<RandMcNallyData>
<Path>./RandMcNallyData</Path>
<Path>/Speicherkarte/NAVIGON/RandMcNallyData</Path>
</RandMcNallyData>
</Settings>

Not working
Nothing works! You better post everything you got as a one package . Resolution still 320x240 nothing changes. Crap!

is that english version?

mailto_alex said:
Nothing works! You better post everything you got as a one package . Resolution still 320x240 nothing changes. Crap!
Click to expand...
Click to collapse
If you did as I described in the first post it is running. I wonder why you cant get it to work.
Have you changed these 3 files?
- NavLoader.cfg
- ApplicationSettingsPathes.xml
- BinaryConfig.xml
I will not post everything again in one package, because of the different languages you have to change a few things manually.
Its not crap just because its not running on your Mini...

mrmartischmi said:
<?xml version='1.0' encoding='ISO-8859-1'?>
<Settings>
<Product>MN</Product>
<Version>7.0</Version>
<!-- path to *.default settings and files which will be not written by the application -->
<FactorySettings ID="CE">./Settings</FactorySettings>
<FactorySettings ID="WIN">./Settings</FactorySettings>
<!-- path to the settings files which can be edited by the user -->
<UserSettings ID="CE">./Settings</UserSettings>
<UserSettings ID="WIN">./Settings</UserSettings>
<!-- path to the user data xml file -->
<UserData ID="CE">./Settings</UserData>
<UserData ID="WIN">./Settings</UserData>
<!-- path to sextant configfiles -->
<SextantConfigFiles ID="CE">./Settings/Core</SextantConfigFiles>
<SextantConfigFiles ID="WIN">./Settings/Core</SextantConfigFiles>
<DataFiles ID="CE">./Dat</DataFiles>
<ETA>./Settings/</ETA>
<Language ID="CE">./language_files/</Language>
<Language ID="WIN">./language_files/</Language>
<Map>
<Path>./map</Path>
<Path>/Speicherkarte/NAVIGON/map</Path>
</Map>
<Overmap>
<Path>./POI</Path>
<Path>/Speicherkarte/NAVIGON/POI</Path>
</Overmap>
<MapStyles>./MapStyles</MapStyles>
<Sound>
<Path>./Sounds</Path>
<Path>/Speicherkarte/NAVIGON/Sounds</Path>
</Sound>
<VersionInfo>
<Path>./</Path>
</VersionInfo>
<KeyStorage>./</KeyStorage>
<Favorites>./Favorites/Favorites.store</Favorites>
<RecentTargets>./Favorites/RecentTargets.store</RecentTargets>
<Routes>
<Path User="writable">/Speicherkarte/NAVIGON/Routes</Path>
<Path>/My Flash Disk/NAVIGON/Routes</Path>
<Path>./ExampleRoutes</Path>
</Routes>
<LogBook>
<Path>./LogBook/</Path>
<MN7File>LogBook.xls</MN7File>
</LogBook>
<VoiceRecognition>
<Path>./VoiceRecognition</Path>
<SessionPath>./VoiceRecognition</SessionPath>
</VoiceRecognition>
<OutloookContacts>
<Path>./Contacts/contacts.txt</Path>
<Path>./Contacts/freshcontacts.txt</Path>
</OutloookContacts>
<DemoPlayer>
<Screen Res="320x240">./demo/PlayerDataLandscape.nfs</Screen>
<Screen Res="240x320">./demo/PlayerDataPortrait.nfs</Screen>
<Screen Res="320x480">./demo/PlayerDataLandscape.nfs</Screen>
<Screen Res="480x272">./demo/PlayerDataWidescreen.nfs</Screen>
<Screen Res="480x320">./demo/PlayerDataWidescreen.nfs</Screen>
</DemoPlayer>
<LogPath>
<GPS ID="CE">/Speicherkarte/Navigon/SimulationFiles/GPS</GPS>
<TMC ID="CE">/Speicherkarte/Navigon/SimulationFiles/TMC</TMC>
<Tuner ID="CE">/Speicherkarte/Navigon/SimulationFiles</Tuner>
</LogPath>
<RoutingFiles>./Settings/Routing/</RoutingFiles>
<RESY>./Settings</RESY>
<AutoZoom>./Settings/autozoom.ini</AutoZoom>
<RandMcNallyData>
<Path>./RandMcNallyData</Path>
<Path>/Speicherkarte/NAVIGON/RandMcNallyData</Path>
</RandMcNallyData>
</Settings>
Click to expand...
Click to collapse
Thank's a lot I will try it asap.

Reply
mrmartischmi said:
Have you changed these 3 files?
- NavLoader.cfg
- ApplicationSettingsPathes.xml
- BinaryConfig.xml
I will not post everything again
Click to expand...
Click to collapse
Pls post only files that has to be changed. In this way i'll replace them all with the existing once and see if it works.
My files attached

Now I got it working at least the program but my next problem is that it cant detect any satellites, it seems that it cant find the internal gps.
Do thoose of you who have it working edit any gps settings?

dontomase said:
Now I got it working at least the program but my next problem is that it cant detect any satellites, it seems that it cant find the internal gps.
Do thoose of you who have it working edit any gps settings?
Click to expand...
Click to collapse
Navigon\Settings\UserSettings.xml
<GPS>
<Type>1</Type>
<GPSPort>4</GPSPort>
<Baudrate>4800</Baudrate>
<DRVPrefix></DRVPrefix>
</GPS>

mrmartischmi said:
Navigon\Settings\UserSettings.xml
<GPS>
<Type>1</Type>
<GPSPort>4</GPSPort>
<Baudrate>4800</Baudrate>
<DRVPrefix></DRVPrefix>
</GPS>
Click to expand...
Click to collapse
I was just about to write here that I found the problem but you were to fast. I changed it to 4800 baud nd it works as a charm.
Thanks for your help.

Navigon Instalation
Dear Martin,
I download from the link the Navigon for the Hd Mini and after the installation when I try to run the software I receive the message navigon.exe doesn't exist
Do you have any help for that?
Best regards
Stefanos

steftam said:
Dear Martin,
I download from the link the Navigon for the Hd Mini and after the installation when I try to run the software I receive the message navigon.exe doesn't exist
Do you have any help for that?
Best regards
Stefanos
Click to expand...
Click to collapse
Have you changed these 3 files as described in the very first post?
- NavLoader.cfg
- ApplicationSettingsPathes.xml
- BinaryConfig.xml

[27.AUG.11] Update to latest APN lists, kindly requesting from all chefs attention.

Dear all Flashoholics and Chefs
One of joy or painfully of flashing new ROM is seeing or not the auto APN works on fresh ROM. Of course manual APN config is not so hard but sometime it turn me off to enjoy yours very hardworking, chefs.
After few time failed to figure out the issue that happened to my carrier Mobifone, finally, today I find out this issue and I want to share my experience with people who got same problem.
Normally, if some thing wrong with auto APN, I am looking for problem in APNs-conf.xml located in system/etc/ and my carrier name, access point name, user name ans password already there.
<apn carrier="Mobifone" mcc="452" mnc="00" apn="m-wap" user="mms" server="" password="mms" mmsc="" type="default,supl"/>
Click to expand...
Click to collapse
I try to overwrite it by an working apns-conf.xml from 'working' build but no luck.
Till now, after Google-ing I found the problem is I overwrite it too late, after flashing, apns-conf.xml to gets the sack and another star went in to the stage telephony.db located in /data/data/com.android.providers.telephony/databases/telephony.db
see excellent articale from Dr. Pei Zheng's Mobile Computing Blog
In my case, I use SQLite Editor to check and found my manual APN with correct data at the bottom of the list, correct
mnc="01"
Click to expand...
Click to collapse
like I found in 'working' apn list or similar to manual APN and then auto APN works like a charm!
So, for flashoholics experience same my trouble, before flash you new favorite ROM, check your APNS-CONF.XML before flashing, if your carrier data is not correct, extract it out, correct it, delete wrong one, drop corrected one in ROM. Enjoy perfect ROM.
So, for chefs, would you kindly spare some time to check this small items and correct it so your ROM become perfect one.
My working auto APN ROM, say white list are: TYTUNG NEXUS HD2, LANGTHANG MIUI ROM
My painful list name a few are: stock MIUI, BPSenseZv1.0_eu,HD2_Core_Droid_Desire_HD_Froyo_V1.7_RV, TyphooN CyanogenMod 7,...
I post my working APNs List in attachment.
ANy body having manually edit APN, post your case below, I'll try to update it in 2nd post and update apns-conf.xml
Thanks
Edit: just found another topic about update APN
Once you have obtain an updated version of the apps-conf.xml file, you run the following commands using the Android Developer Kit.
Code:
adb remount
adb push apns-conf.xml /system/etc
adb shell chmod 755 /system/etc/apns-conf.xml
adb reboot
I just found out that to save the existing APN list you use the command below which will save the existing apns-conf.xml file to the local PC. I also discovered that when I went to view the global APN list on the phone, nothing was listed, it was all blank. I’ve just read tho, that if you press “RESTORE DEFAULTS” in the APN view, they should appear…. test time!
Code:
adb pull /system/etc/apns-conf.xml D:\android\APN
Click to expand...
Click to collapse
But I haven't test is yet! You may try it instead of edit db file and let me know it works?

My 1st case: wrong MNC=00, right MNC=01
<apn carrier="Mobifone" mcc="452" mnc="01" apn="m-wap" user="mms" server="" password="mms" mmsc="" type="default,supl"/>

Nice thread. A lot of people have problems with apn.
Sent from my HD2 using XDA Premium App

This have 1409 lines !
My list: 3478 lines (This is from HTC WWE)

dungphp said:
This have 1409 lines !
My list: 3478 lines
Click to expand...
Click to collapse
The problem is correct line, not more or less! I can verify your ROM in my white lists, Sir!
I upload yours on 1st post!

Same problem with CM7 nightly on my N1 with Mobifone, using TB to restore the manual added APN.
Tks for this tip.

Good Topic.
Anybody have problem with apn auto setup post here.
We'll update to ROM

Is there anyway to add another t-mobile apn
wap.voicestream.com is what i use for t-mobile data apn.

my apn is :
<apn carrier="MCC" mcc="310" mnc="260" apn="mcinet" user="" server="" password="" mmsc="" type="default,supl"/>
can i add just this apn to apns-conf and delete them ???

DJ_MiX said:
Is there anyway to add another t-mobile apn
wap.voicestream.com is what i use for t-mobile data apn.
Click to expand...
Click to collapse
You can try to add like this syntax and save as your own apns-conf.xml.
Code:
<?xml version="1.0" encoding="utf-8"?>
<apns version="8">
<apn carrier="T-Zones WAP" apn="wap.voicestream.com" user="none" password="none" mmsc="http://mms.msg.eng.t-mobile.com/mms/wapenc" mcc="xxx" mnc="yyy" operator="T-Mobile" type="default,supl,mms" />
</apns>
Most important is APN, MCC, MNC. You also can get it by install market enabler and read actual Values: gsm.sim.operator.numeric = xxxyyy, your MCC = xxx, MNC= yyy.
You also can check your Carrier via this page Mobile Network Codes (MNC) for the international identification plan for public networks and subscriptions (According to Recommendation ITU-T E.212 (05/2008))2009
Please feedback your experience so as we may update it!

hessamx said:
my apn is :
<apn carrier="MCC" mcc="310" mnc="260" apn="mcinet" user="" server="" password="" mmsc="" type="default,supl"/>
can i add just this apn to apns-conf and delete them ???
Click to expand...
Click to collapse
Yes, you can make your own apns-conf.xml use only your APN with 1 simcard only and saving few hundred KB on your ROM. See above post.
But your APN is really mcinet? Your carrier is MCI Iran? If it is correct so yours are mcc="432" mnc="11".
mcc="310" mnc="260" is T-mobile US.
Pls feedback!

THANHVO31 said:
Yes, you can make your own apns-conf.xml use only your APN with 1 simcard only and saving few hundred KB on your ROM. See above post.
But your APN is really mcinet? Your carrier is MCI Iran? If it is correct so yours are mcc="432" mnc="11".
mcc="310" mnc="260" is T-mobile US.
Pls feedback!
Click to expand...
Click to collapse
yeah my mcc and mnc are 310,11 .
it's for my marketacces i remove it,i use this attachment ,it worked and my defualt apn is mcc .
thanx Bro
for use my apn change name to apns-conf.xml

is that work on another cellphone like Motorola defy cm7-nightly 2.3.4 ??

THANHVO31 said:
You can try to add like this syntax and save as your own apns-conf.xml.
Code:
<?xml version="1.0" encoding="utf-8"?>
<apns version="8">
<apn carrier="T-Zones WAP" apn="wap.voicestream.com" user="none" password="none" mmsc="http://mms.msg.eng.t-mobile.com/mms/wapenc" mcc="xxx" mnc="yyy" operator="T-Mobile" type="default,supl,mms" />
</apns>
Most important is APN, MCC, MNC. You also can get it by install market enabler and read actual Values: gsm.sim.operator.numeric = xxxyyy, your MCC = xxx, MNC= yyy.
You also can check your Carrier via this page Mobile Network Codes (MNC) for the international identification plan for public networks and subscriptions (According to Recommendation ITU-T E.212 (05/2008))2009
Please feedback your experience so as we may update it!
Click to expand...
Click to collapse
I ran markey enabler and all I see is
gsm.sim.operator.numeric = 310260
your MCC = xxx, MNC= yyy
do not show up in the app but show in apn settings as
MCC 310
MNC 260
for MMSC I'm using default t-mobile
http://mms.msg.eng.t-mobile.com/mms/wapenc

hessamx said:
is that work on another cellphone like Motorola defy cm7-nightly 2.3.4 ??
Click to expand...
Click to collapse
Yes, of course! Any Android phone, I think.

DJ_MiX said:
I ran markey enabler and all I see is
gsm.sim.operator.numeric = 310260
your MCC = xxx, MNC= yyy
do not show up in the app but show in apn settings as
MCC 310
MNC 260
for MMSC I'm using default t-mobile
http://mms.msg.eng.t-mobile.com/mms/wapenc
Click to expand...
Click to collapse
Just replace what you find in your xml, put in to your rom and flash. you can see "magic" auto apn

worked on motorolla defy !!
thanx for ure work