Hi
Anyone came across/using some headrest mount for Archos 10.1 for rear passengers (i.e. kids) to watch cartoons in the car?
Thanks
Max
I picked this up from amazon: http://www.amazon.com/gp/product/B0043XEII0/ref=oss_product
It fits the 101 well and seems pretty sturdy.
can you post pictures of this ??? please
krohnjw said:
I picked this up from amazon: http://www.amazon.com/gp/product/B0043XEII0/ref=oss_product
It fits the 101 well and seems pretty sturdy.
Click to expand...
Click to collapse
so it's resizeable then? since the ipad is much wider than the 101....
Related
I just grabbed the Viewsonic Gtablet today, and need to find a good, solid headrest mount for it. I'm also looking for the best bang for the buck. Any ideas
Protective Case for Tablet Iconia TAB A500
http://store.acer.com/store/acereme...=TbTe1goHAtcAACZYnlMAAAAj&rests=1303699156864
Could only find the case so far any others let me know.
Sleeve for ipad
This typo ipad sleeve fits well got one for now to carry it around.
vjb said:
This typo ipad sleeve fits well got one for now to carry it around.
Click to expand...
Click to collapse
I got a black one of these yesterday. Fits a treat
Protective Case for Tablet Iconia TAB A500
staples.com/StaplesProductDisplay?catalogIdentifier=2&langId=-1&productId=385411&storeId=10001
acrown said:
staples.com/StaplesProductDisplay?catalogIdentifier=2&langId=-1&productId=385411&storeId=10001
Click to expand...
Click to collapse
Excellent find! I've looked everywhere and couldn't find it in the US.
found this case with USB keyboard on Amazon.
http://www.amazon.com/Iconia-Leathe...3MEU/ref=sr_1_1?ie=UTF8&qid=1310825608&sr=8-1
Any recommendations on a dashboard or window mount for the a100? I was thinking about hooking mine up to the car as a media player/gps.
Thanks
Sent from my ADR6400L using Tapatalk 2
Arkon SM517
I purchased this and am surprised how well it holds the tablet: Arkon SM517 Windshield Mount for 7-Inch Tablets
It also works fine as a slightly oversized holder for my smartphone.
Hey thanks and it's cheaper than what other options i found.
Sent from my ADR6400L using Tapatalk 2
RangerJay said:
I purchased this and am surprised how well it holds the tablet: Arkon SM517 Windshield Mount for 7-Inch Tablets
It also works fine as a slightly oversized holder for my smartphone.
Click to expand...
Click to collapse
I have this mount and it works great. I use it in an old Mac tractor trailer 5 days a week and it holds up great. Has yet to fall off the window, which is shocking cause my truck is very very rough riding.
Sent from my PC36100 using xda premium
http://www.amazon.com/Kropsson-Univ...5?s=electronics&ie=UTF8&qid=1337876696&sr=1-5
800 or 850. This is one hell of a Tablet Holder! It will also take Samsung Galaxy S in portrait mode.
It is very well build, with quality plastic and soft touch materials. The joints are metal and really sturdy. It holds my a100 with almost no vibration even on rough roads.(I have the acer a100 genuine bump protector on - which is also the best in my opinion, even makes a100 more beautiful because the back is made in brushed metal look - stunning)
Pricey for sure! But functionality, looks and build quality goes for 9/10
P.S. You could easily read the reviews - they are all as nice as the product itself. There are also HD videos/illustrations in you tube/google where you could see what you are paying for in the closest detail!
Lots of options thats what i love about xda. Good people and good advice
Sent from my ADR6400L using Tapatalk 2
Hello,
I was wondering if anyone out there had any recommendations on a car mount that works with the Ballistic SG Maxx case?
I really like the way the car mount in this http://forum.xda-developers.com/showthread.php?t=1806888 thread. Unfortunately it looks like it is only made to fit the phone without a case.
Anyone have any recommendations for me for a good mount with this case?
Thank you,
Whiteice
WhiteiceDMSTech said:
Hello,
I was wondering if anyone out there had any recommendations on a car mount that works with the Ballistic SG Maxx case?
I really like the way the car mount in this http://forum.xda-developers.com/showthread.php?t=1806888 thread. Unfortunately it looks like it is only made to fit the phone without a case.
Anyone have any recommendations for me for a good mount with this case?
Thank you,
Whiteice
Click to expand...
Click to collapse
http://www.arkon.com/smartphone-car-mount.html
I used a Galaxy S (Captivate) & hard Body Glove case w/ detachable beltclip so the nub the clip mounted to increased the maximum thickness of the case to about 1" with the Akron Mega Grip model. The sides are spring loaded so as long as the Ballistic can get a little support from the bottom clips (i.e. so it isn't just the side grips holding the phone) it should work. Thickness of the Ballistic needs to be around 1". Looking at the Ballistic online I think it would work, if you buy it from Amazon you should be able to return it if it doesn't.
RE: Using Ballistic SG Maxx. Need a car mount
I recently upgraded to the Galaxy S3 and not long after my Garmin Nuvi 205 quit working. I had just purchased a new window mount for the Nuvi. I started using the Galaxy for navigation and wished I too, had a car mount. I noticed the Nuvi and the SG-Maxx case had similar slots on the edges and upon further investigation found them to be very close to the same size. I had to remove a small amount of plastic from the Nuvi car-mount to get it to work better, but this was easily done with a sharp utility knife (As you can see in the photo). This replacement Nuvi Car mount was less than $6 online: I have used it for over 3 months now and it has worked well for me.
UpperCase G said:
I recently upgraded to the Galaxy S3 and not long after my Garmin Nuvi 205 quit working. I had just purchased a new window mount for the Nuvi. I started using the Galaxy for navigation and wished I too, had a car mount. I noticed the Nuvi and the SG-Maxx case had similar slots on the edges and upon further investigation found them to be very close to the same size. I had to remove a small amount of plastic from the Nuvi car-mount to get it to work better, but this was easily done with a sharp utility knife (As you can see in the photo). This replacement Nuvi Car mount was less than $6 online: I have used it for over 3 months now and it has worked well for me.
Click to expand...
Click to collapse
I did the same thing! A review on Amazon said that they used a mount for a Garmin Nuvi 255W and it worked well, so I bought a mount on eBay for $6 (plus another $6 for shipping). It fits the slots perfectly without cutting. The only thing I would say is that it's a bit tight right now. However, it's very sturdy and works great. I have a USB cord tied around it so that I can charge the phone too.
BTW, the Ballistic SG MAXX black & white case looks GREAT on the white Galaxy S III. I can only find pictures of the B&W case on the pebble blue for some reason. I wanted to post pics, but they were pretty blurry (need more light).
Would you guys share what holders and chargers do you use in your cars?
I am looking for something decent.
Thanks
Sent from my A0001 using XDA Free mobile app
I use the Keno+ for Phablets. I drive a 2013 Honda civic and it plugs right into the vent to the right of the steering wheel. It works great, never fallen out, easy to adjust. I'd definitely recommend this one. Kenu Airframe+ Car Mount for Phablets.
I recently picked up a Scosche MagicMount at Walmart. The price was decent and I was pleasantly surprised at how well it holds the phone in place. The steel plate fits inside my case, and the phone doesn't move when attached to the mount.
After using it a bit I decided the mount location was too low for my taste, so I just ordered this version to move it up higher and make it adjustable. I don't have the new one yet, so no pics, but if it works like the flat version I'll be happy.
I use this GreatShield mount:
http://www.amazon.com/gp/product/B00KVJAZVY?psc=1&redirect=true&ref_=oh_aui_detailpage_o09_s00
It's solid and holds the phone still, so I can't complain.
I use this one:
http://www.ebay.com/itm/151657398154
It is dirt cheap and actually nice quality. The suction thingy sticks to any surface.
iottie, i've never had a mount with this type of suction cup, it's crazy how well it grabs.
I use the Gripgo on my OPO with a Diztronic TPU case in my 2006 Honda civic
Sent from my A0001 using Tapatalk
I'm using this steering wheel clip:
http://www.ebay.co.uk/itm/251719151...49&var=550644989663&ssPageName=STRK:MEBIDX:IT
but this air vent mount is also good:
http://www.ebay.co.uk/itm/281693722904?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Why do I gave both? One for a vertical view and one for horizontal. They both hold and support the oneplus one.
The best option for this is with no doubt like this
http://www.aliexpress.com/item/Univ...-Stand-Holder-For-iPhone-HTC/32297935591.html
Wonderful, i bought about ten for my friends and me.
liver20 said:
The best option for this is with no doubt like this
http://www.aliexpress.com/item/Univ...-Stand-Holder-For-iPhone-HTC/32297935591.html
Wonderful, i bought about ten for my friends and me.
Click to expand...
Click to collapse
I'll vouch for these too. I even use 2 to hold my iPad mini on my dash. Although I bought them from ebay, more expensive at 2 for £5GBP, but you get them in 3 days rather than the estimated 30-60 days from aliexpress.
See pic
I use this iOtie holder and it is perfect. The gel pad sticks without any issue and I'm not worried about it falling off on these crappy Dallas roads.