Develop Bugs

Docks made for the OG SGS II...

Just wondering if anyone knows if they would work with our version...
Send from my SGSIIE4T using the XDA app for Android

Epic 4G Touch has slightly larger dimensions and is a bit more curvy. So more than likely not.

OK, so now that the phone has been out for awhile, someone certainly has tried a dock for the SGS2 to see if they work.
I know that our phones are 1mm thicker but there must be some docks that only support the back of the phone. If the usb port is in the middle of the phone then it's only .5mm thicker from there to the rear of the phone, that means if a case has just a wee-bit of slack it should work for our phones... right??
I'm about to start ordering some SGS2 docks from Amazon and see if I can find one that works. If you have already done so then save the rest of us some headaches.
Thanks!
Chad H

I own both phones, and the E4GT is not only slightly thicker but slightly wider (see dimensions comparison on this page).
You might be able to find an Infuse 4G dock that fits the E4GT though.

Thanks for your input. It's nice to hear from someone who actually owns the device (s) in question.
I'll keep looking and maybe find an infuse dock to try.
Thanks again,
Chad
Sent from my NookColor using XDA Premium App

I am using a Seidio innodock JR that I had from my palm treo pro. It is a charger only I think. Its OK but not a custom fit by any means. I am happy to recycle it though.

http://amzn.com/B005NJ6EPI <--- this from Amazon is the kind of idea I was thinking of. It should work for any device with a micro USB on the bottom of the device. There are even tablet stands that would work in a pinch. I think I am going to order one from Amazon and report back.
Thanks,
Chad

GooseChaser said:
Thanks for your input. It's nice to hear from someone who actually owns the device (s) in question.
I'll keep looking and maybe find an infuse dock to try....
Click to expand...
Click to collapse
Let us know how the infuse dock works for you!
-D

Nice but Expensive, I think
Not really a docking kind of guy, but I remember coming across this one and thinking that's nice but expensive, I think
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28507
Expected Arrival Date: Oct. 3, 2011

THAD LOVELACE said:
Not really a docking kind of guy, but I remember coming across this one and thinking that's nice but expensive, I think
http://www.mobilecityonline.com/wireless/store/productdetail.asp?productid=28507
Expected Arrival Date: Oct. 3, 2011
Click to expand...
Click to collapse
I agree on the expensive part! I like the idea of the one above better because it allows for landscape use also.

GooseChaser said:
<--- this from Amazon is the kind of idea I was thinking of. It should work for any device with a micro USB on the bottom of the device. There are even tablet stands that would work in a pinch. I think I am going to order one from Amazon and report back.
Thanks,
Chad
Click to expand...
Click to collapse
Would the docking features work in this dock? I don't want it just to charge......

Custom 3d Printed Car Dock

So just like Cray Talk, I got tired of waiting on Samsung and designed and built my own Car Dock. It took me 3 designs/prototypes but the final outcome is quite nice. It has the POGO pins (only 2) and a micro USB plug. It was built on my Objet printer so I'm not sure how durable it will be long term but so far so good. The material tends to get soft at higher temperatures so fingers crossed it will be OK this summer . I would love to tool this thing and mold it but with how fast things change in the tech world, I doubt I could recoup my investment. I would be happy to share my CAD files of the car dock and/or the Gnex phone solid I used to create it for anyone interested in having a go themselves or if they want to build one. BTW this fits the CDMA with extended battery version.

Awesome work! Those objets make things look easy
I'd love to give the cad files (sold and the dock) a try - I have reprap myself, but hopefully I can convert them to something printable on my machine. (I'd like to try for a desktop dock as well)
What software did you design in?

Rengineer said:
Awesome work! Those objets make things look easy
I'd love to give the cad files (sold and the dock) a try - I have reprap myself, but hopefully I can convert them to something printable on my machine. (I'd like to try for a desktop dock as well)
What software did you design in?
Click to expand...
Click to collapse
Thanks. I use Solidworks. PM me with what CAD format you want and I'll send you he files.

Looks good, it would be perfect if I didn't need this stupid case. Wish I had access to a 3d printer.
Sent from my Galaxy Nexus using xda premium

I love living in the future

Very nice!!!
I'd love it if you could share your CAD file(s).
We have a 3d printer here at work and I'd love to print this :-D

bekyndnunwind said:
Very nice!!!
I'd love it if you could share your CAD file(s).
We have a 3d printer here at work and I'd love to print this :-D
Click to expand...
Click to collapse
pm me with what CAD format you want and I will send them to you. Native format is Solidworks.

AWESOME. I love it. Now if only Samsung sold a 3 pin connector or simply a dock that accommodated a case, then I would be in heaven. Seriously, the Droid Razr dock is by FAR the best dock I have seen out there. It used a spacer so you could remove it to fit the phone, WITH A CASE, into the dock. And then a simple sliding micro USB connected to the phone. No fiddling with wires, no head ach.

redrapt0r said:
AWESOME. I love it. Now if only Samsung sold a 3 pin connector or simply a dock that accommodated a case, then I would be in heaven. Seriously, the Droid Razr dock is by FAR the best dock I have seen out there. It used a spacer so you could remove it to fit the phone, WITH A CASE, into the dock. And then a simple sliding micro USB connected to the phone. No fiddling with wires, no head ach.
Click to expand...
Click to collapse
It's a shame there are so many cases out there with different shapes and sizes. Can't possibly account for everything.

Indeed but the most common is the silicone/TPU cases, so even if the dock worked with them, it would be a step in the right direction

Are you selling these yet?

FYI - if you want, you can start selling your desgin @ Ponoko. Maybe with a little more tweaking you could make a slot for the 3 pin pogo connector.
I'd bet you would sell quite a few of these.
As a side note, I'm kinda surprised no 3rd party has made a pogo pin car dock by now.

Im not selling them because they are expensive to build given the material costs $0.50 per gram.
Regarding the pogo pin question, they are in the design and are working great.

erikjonpeterson said:
Im not selling them because they are expensive to build given the material costs $0.50 per gram.
Regarding the pogo pin question, they are in the design and are working great.
Click to expand...
Click to collapse
Let your customers incur the cost.

I am getting a 3d printer at work and the cost of the material will be much cheaper than yours...lets talk. How many grams of material does it use? Are you using ABS? Did you use a tutorial for the pogo part? If so, which?

For anyone interested in the dock I made...
You can grab the files from here.
FTP://novelideas.homeftp.net
User: XDA
PW: XDA
There are several different formats including .stl. I bought the POGO pins from DIGI-Key, PN-ED8182-ND and the Micro USB from SparkFun, PN-BOB-09614.
I do not take any responsibility for it's functionality when built from your 3d printer or other prototyping methods. I built mine from an Objet 30 and it works great.
This is designed to fit CDMA version with the extended battery and cover. I designed it to snap on an existing Motorola suction cup mount from a droid bionic car dock.
Have fun!

Thanks a lot this will certainly come in handy.

takeagabu said:
I am getting a 3d printer at work and the cost of the material will be much cheaper than yours...lets talk. How many grams of material does it use? Are you using ABS? Did you use a tutorial for the pogo part? If so, which?
Click to expand...
Click to collapse
I PM'd you the info on getting my files. I don't remember the exact weight but I think it is around 150 grams of build material and 200 grams of support material. I have an Objet machine so it uses photo polymer material specific to Objet.
The pogo pin design and usb design is my creation, no tutorial around that I know of.

erikjonpeterson said:
I PM'd you the info on getting my files. I don't remember the exact weight but I think it is around 150 grams of build material and 200 grams of support material. I have an Objet machine so it uses photo polymer material specific to Objet.
The pogo pin design and usb design is my creation, no tutorial around that I know of.
Click to expand...
Click to collapse
Thanks! I'll let you know how it goes when we receive the 3d printer

that's an awesome dock....3d printers are the shiz. I'd be totally interested in 3d printed home dock if anyone were to make any and sell them.
Sent from my Galaxy Nexus using xda premium

OEM Car Dock

Has there been any news of an OEM car dock? Missing the superior fit and function from my GS1 dock. I want to just be able to slide the charge plug in without a fuss. You can't plug two cables in easily when driving down the road.

Yes and it's a disappointing offer from Samsung:
http://www.mobilefun.co.uk/genuine-samsung-galaxy-s3-vehicle-dock-ecs-k200begstd-p35105.htm
Honestly I've been rocking the Infuse 4g car dock and love it, not to mention you can't beat the price!

Does the aux/audio out work in the Infuse 4G dock??

eheaps said:
Does the aux/audio out work in the Infuse 4G dock??
Click to expand...
Click to collapse
Perfectly (at least for me).

will the infuse dock still work with a case? I have a somewhat slim simple clear case that protects the back/sides

Brett8187 said:
will the infuse dock still work with a case? I have a somewhat slim simple clear case that protects the back/sides
Click to expand...
Click to collapse
It's a pretty snug fit WITHOUT a case, so I'm going to go with my gut and say no.

Jubmasterflex said:
Yes and it's a disappointing offer from Samsung:
http://www.mobilefun.co.uk/genuine-samsung-galaxy-s3-vehicle-dock-ecs-k200begstd-p35105.htm
Honestly I've been rocking the Infuse 4g car dock and love it, not to mention you can't beat the price!
Click to expand...
Click to collapse
I'm gonna have to say like the comments for that link that this is just some generic dock. I don't know why they have not announced a car dock yet. IMHO that's one of the more popular accessories.

jdubau55 said:
I'm gonna have to say like the comments for that link that this is just some generic dock. I don't know why they have not announced a car dock yet. IMHO that's one of the more popular accessories.
Click to expand...
Click to collapse
Actually someone mentioned in another cardock thread that they spoke to a Samsung rep who confirmed that's the only OEM cardock they plan on releasing for the Galaxy S3.
When it comes to accessories, Samsung is far from the leader.

jdubau55 said:
I'm gonna have to say like the comments for that link that this is just some generic dock. I don't know why they have not announced a car dock yet. IMHO that's one of the more popular accessories.
Click to expand...
Click to collapse
It's not, when you look at the video from that site it is a Samsung dock but a universal Sammy dock for 4 inches to 5.3 inches. Lame.

Yeah, you're better off getting a cheap Infuse dock - it holds the phone very securely, and the charging port / audio-out connections work very well. You'll need to take your phone out of its case, but if you have a Diztronic or other TPU-type case, that's not so difficult.

Well...crap. Every other Galaxy S has had dedicated car docks. They finally release a Galaxy S that is the same form factor worldwide and then don't release a car dock. Yet, they will release like 4 different ones for the S2. Stupid.

I have a 3D Printer. Any requests?

**UPDATE 8/17/2012**
I've been working on many of your suggestions and am really enjoying hearing new ones. Please keep them coming!
I'll maintain this top post to include which projects I've finished, which I've started (and their progress) and which are in the pipeline.
Finished and posted to techneesh.com:
- Hybrid portrait//landscape dock (iExitus,
- Custom engraving (txkorm,
- Extra colors (-FuRBz-,
- Brass Knuckles Case (Se23, baghera1979,
- Bumper Case (thanks, ruvort)
In the pipeline (priority-ordered, approximately):
- Brass Knuckles 2.0 (with holes for charging/buttons, top cover for aesthetics, smaller finger holes, rounded edges)
- Dock for Otterbox Commuter Case
- Tobacco Case (not xda related, but xda member requested - will double as a microSD holder
- Bumper Case 2.0
- Dock for Hyperion Extended Battery
- Variable/adjustable dock for other cases
- Modular Dock (specs are not yet solidified. perhaps it will have a connection for an adapter to attach to your car, your bike, etc. Perhaps for preexisting docks like the iHome. Post your thoughts!) (tghockey07,
- HDMI//USB Host Dock
- Your next suggestion
Sorry if I didn't include you I got cut off bc I'm currently boarding a plane
*********************
Just upgraded from my bionic to this sweet phone & ordered the 4200 mah extended w/nfc from amazon for $19.
I made a custom car dock and docking station for the bionic- I was going to integrate HDMI & a usb hub (kind of like this ultrabook docking station) so ppl could use Motorola's Webtop Software more easily... but the # of ppl w/Bionics seems to have diminished extensively.
Anyway, I'm wondering if folks have any dreams for a sgs3 accessory that they'd like to exist.
I want the Mugen dock w/HDMI but it looks like it's out of stock until September... so I may design one myself. lmk any thoughts!

Triskite said:
Just upgraded from my bionic to this sweet phone & ordered the 4200 mah extended w/nfc from amazon for $19.
I made a custom car dock and docking station for the bionic- I was going to integrate HDMI & a usb hub (kind of like this ultrabook docking station) so ppl could use Motorola's Webtop Software more easily... but the # of ppl w/Bionics seems to have diminished extensively.
Anyway, I'm wondering if folks have any dreams for a sgs3 accessory that they'd like to exist.
I want the Mugen dock w/HDMI but it looks like it's out of stock until September... so I may design one myself. lmk any thoughts!
Click to expand...
Click to collapse
O_O man that printer is just insane. I've seen one in action and in some cases they have them in stores where you can just go an pay a certain amount for the object your printing

3D printers are amazing, and have really come down in price. I remember the first laser printers were in the $5000 and up range... ($5000 on the lower end as I recall)
And now, you can print in 3D ......... soooo cool.

So how would this work if you printed something for me? Not sure what yet, but I'm sure I could think of something that I've had in mind
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Araltd said:
3D printers are amazing, and have really come down in price. I remember the first laser printers were in the $5000 and up range... ($5000 on the lower end as I recall)
And now, you can print in 3D ......... soooo cool.
Click to expand...
Click to collapse
O_O dafuq am i the only one never heard of a 3D printer...?!

i'd like to have a cover with a 3d unishark on it!!!!!
Sent from my GT-I9300 using xda premium

Can you print a phone back?
Sent from my Samsung Galaxy S3 with XDA Premium

Awesome. One day I WILL have to buy/build a 3D printer, but they're still currently either way too expensive, or way too janky (MakerBot). And then one day a little further down the road: true desktop molecular manufacturing for everyone (nanotechnology).
In any case, here's something I'd definitely design and print for my phone if I had a 3D printer: End caps and/or snap-on housings for my right-angle 3.5mm stereo cable AND my right-angle micro USB cable. Why? Because I often have both plugged in and it's a pain to comfortably hold my phone in landscape mode while gaming with the nubs of each cable connector jamming into my hands. Would much rather have something with more surface area covering 'em. (KICKSTARTER?! $$$ )

GamerMYJ said:
Can you print a phone back?
Sent from my Samsung Galaxy S3 with XDA Premium
Click to expand...
Click to collapse
if you give him the 3d geometry file he can print it providing the overhangs are not too bad or it may have to be done in multiple parts.

A D&D Character holding a White Galaxy S III

Triskite said:
Just upgraded from my bionic to this sweet phone & ordered the 4200 mah extended w/nfc from amazon for $19.
I made a custom car dock and docking station for the bionic- I was going to integrate HDMI & a usb hub (kind of like this ultrabook docking station) so ppl could use Motorola's Webtop Software more easily... but the # of ppl w/Bionics seems to have diminished extensively.
Anyway, I'm wondering if folks have any dreams for a sgs3 accessory that they'd like to exist.
I want the Mugen dock w/HDMI but it looks like it's out of stock until September... so I may design one myself. lmk any thoughts!
Click to expand...
Click to collapse
I would love a docking station for this beast.

which 3d printer did you get? I'm pricing a few out right now as well if anyone has any pointers...

I desperately want a 3D printer. So many ideas in this thick skull. lol
You should do the inductive charging mod for your phone with the Pre back cover and fabricate a car mount for the S3 with a slot to slide a touchstone into it.
Oh yeah, I'd want one. I'm hoping for something similar when Samsung eventually gets around to releasing their official inductive charging kit unlike the Verizon only one that Big Red just released.
That's a really nice docking station for the Moto btw.

Responses for all!
baghera1979 said:
So how would this work if you printed something for me? Not sure what yet, but I'm sure I could think of something that I've had in mind
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Well if it's something that I think sounds cool I would probably just make it and send you one for free- the material isn't exactly cheap but it's definitely not expensive, either. The design time sometimes takes a while (2-10 hours), though, depending what it is. But yeah just throw down some ideas.
I'm also up to do custom orders for relatively cheap (~$20/hr design time, $3 per ounce printed). You can see some stuff I've done here, here, and here.
GamerMYJ said:
Can you print a phone back?
Sent from my Samsung Galaxy S3 with XDA Premium
Click to expand...
Click to collapse
After I hacked my bionic for wireless charging I tried designing part of a phone back (my first print + first design ever, so it looks terrible). Even now that I'm pretty good with the printer & designing things, I don't think it has quite the precision for the fine interlocking mechanism required for the phone back to snap to the phone.
Also, you can see the fine bead of the print so it doesn't look as smooth as china-factory-printed-plastic. (see photo from first post) - so it's better for docks and things like that.
zmore said:
Awesome. One day I WILL have to buy/build a 3D printer, but they're still currently either way too expensive, or way too janky (MakerBot). And then one day a little further down the road: true desktop molecular manufacturing for everyone (nanotechnology).
In any case, here's something I'd definitely design and print for my phone if I had a 3D printer: End caps and/or snap-on housings for my right-angle 3.5mm stereo cable AND my right-angle micro USB cable. Why? Because I often have both plugged in and it's a pain to comfortably hold my phone in landscape mode while gaming with the nubs of each cable connector jamming into my hands. Would much rather have something with more surface area covering 'em. (KICKSTARTER?! $$$ )
Click to expand...
Click to collapse
The makerbot replicator has worked extremely well for me! ($1700). It will do 50+ prints without an issue, and until last week the only fixes I had to do were replacing the tape on the platform and cleaning out the extruder's motor. (last week the motherboard blew, but they immediately shipped me a new one free of charge, and now I'm running again).
OK so let me get this right - you have right angle cables and you'd like something to snap onto the phone to essentially cover both cables so it is
a) more comfortable to hold in landscape
b) protects the jacks from damage
is that about right? or do you want it to snap onto the cables themselves
bdangol said:
if you give him the 3d geometry file he can print it providing the overhangs are not too bad or it may have to be done in multiple parts.
Click to expand...
Click to collapse
Yes I can print most things, even if there's an overhang (it just requires wasting plastic to print support material). Creating a design is pretty easy in Google's (actually Trimble just bought it) free program Sketchup. You can send me the file or an STL exported from any other 3d modeling software.
txkorm said:
I would love a docking station for this beast.
Click to expand...
Click to collapse
What kind of docking station? Power only? HDMI too? Landscape? Vertical? How many folks would also be interested?
Darmokk said:
which 3d printer did you get? I'm pricing a few out right now as well if anyone has any pointers...
Click to expand...
Click to collapse
I got the Makerbot Replicator for the customer support. With relatively premature technology, I think it's worth it to spend a few bucks extra to get awesome support. They answer requests on weekends and will replace any broken parts promptly & free of charge.
However, I would probably try out the Solidoodle, as it is super cheap and looks good. I do feel bad supporting the company as the founder used to work at Makerbot and literally just stole their business model.
msgnyc said:
I desperately want a 3D printer. So many ideas in this thick skull. lol
You should do the inductive charging mod for your phone with the Pre back cover and fabricate a car mount for the S3 with a slot to slide a touchstone into it.
Oh yeah, I'd want one. I'm hoping for something similar when Samsung eventually gets around to releasing their official inductive charging kit unlike the Verizon only one that Big Red just released.
That's a really nice docking station for the Moto btw.
Click to expand...
Click to collapse
Thanks man. You must have seen my other post where I hacked my phone previously for wireless charging?
Not really sure I see the value to it being wireless charging if it's gonna stay stationary in a navigation dock, though? Would it be for device flexibility (so I wouldn't have to redesign it when I get a new phone)?

I'd like a dock that accepts the phone in a case and also works in landscape
Sent from my GT-I9300 using xda app-developers app

Actually didnt know about your previous mod lol.
Was more or less just thinkin aloud (or in text i should say) about a type of of car dock Id like to see for this and future devices. Im a little tired of buying 2-3 new docks (home, car, office) everytime I get a new phone in all honesty.
Would love for a slim universal car dock with inductive charging. Cable can be pulled from the inductive charging pad/touchstone for devices that require being physically plugged in. Makes things simple. Just get in the car, put the device in the dock quickly without worrying about fumbling wires or which side is your port on etc. When you get out just grab the phone. no worrying about wires, bending the usb connector cause you pulled at a wierd angle etc. you know?
Just figured the touchstone + mod would be a nice cheap base to start with for concepting over a $100ish inductive pad. Maybe even stick a laminated rewritable nfc tag in the center with a nice logo on it to program for carmode/ nav/ music or whatever as soon as you dock it. Maybe even make the dock itself detachable and usable as a desktop dock aswell... Ok ok lemme pause my brain for a lil while. I can keep going on and on about this stuff... lol

I am a mechanical engineer and do alot of 3D work in solidworks. I can sketch things up in 3D if people have an idea.
Could the OP use solidworks or step files to automatically print these? I would really like it to design docks and stand if I know the gap margibs from this markerbot
Sent from my GT-I9300 using xda premium

htcsnap93 said:
I am a mechanical engineer and do alot of 3D work in solidworks. I can sketch things up in 3D if people have an idea.
Could the OP use solidworks or step files to automatically print these? I would really like it to design docks and stand if I know the gap margibs from this markerbot
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
I have an idea for a case for the sgh-i747. Just a simple 2 piece snap together case. Nothing fancy. Would be nice to see how that material holds up to some of the others I have.
I guess any clamshell style case would work as a template if you could do that and send it it to OP. I have looked for 3d dimensions for them and can't find anything for it.
Thank you
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

baghera1979 said:
I have an idea for a case for the sgh-i747. Just a simple 2 piece snap together case. Nothing fancy. Would be nice to see how that material holds up to some of the others I have.
I guess any clamshell style case would work as a template if you could do that and send it it to OP. I have looked for 3d dimensions for them and can't find anything for it.
Thank you
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Could you post some links or pics, in private or here of what you mean with clammshell? Dimensions i will get from my own device.
Sent from my GT-I9300 using xda premium

Think you could make a stand for me? I just need one that my phone could sit horizontally, and I'd just plug it in to my MHL adapter. How much would that cost?
Sent from my Samsung Galaxy S3 with XDA Premium

Experiences with ebay Wireless Charge Cover?

Stumbled across this on ebay:
New Wireless Charge Receiver Back Case Protective Cover Skin For HTC M7 ONE 801e
http://www.ebay.de/itm/161058907579...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
It seems to be essentially a plastic backcover with taped-in "wireless charge receiver" and a micro-usb plug to use for charging.
I really want wireless charging but this left me extremely cautious... is there by chance someone around here who actually owns such a thing and can share some experiences? I mean it doesn´t even say if it´s QI compatible and such minor facts, seller doesn´t respond :-/
Or is there maybe an alternative I haven´t found yet?

ecki2k said:
Stumbled across this on ebay:
New Wireless Charge Receiver Back Case Protective Cover Skin For HTC M7 ONE 801e
http://www.ebay.de/itm/161058907579...eName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
It seems to be essentially a plastic backcover with taped-in "wireless charge receiver" and a micro-usb plug to use for charging.
I really want wireless charging but this left me extremely cautious... is there by chance someone around here who actually owns such a thing and can share some experiences? I mean it doesn´t even say if it´s QI compatible and such minor facts, seller doesn´t respond :-/
Or is there maybe an alternative I haven´t found yet?
Click to expand...
Click to collapse
interesting, would be great if:
1. it really worked
2. the usb plug didn't stick out
3. the little wires didn't break
I would also like to know more about this thing

it looks awesome. looks like it just might work. would love to hear from anyone that got something like this
Sent from my HTC One using xda premium

it looks good. Any idea how strong the connections / cable / plug is? is it thick?
how many mA is the charging pad rated at ?
Questions ...

1xinfusion said:
it looks good. Any idea how strong the connections / cable / plug is? is it thick?
how many mA is the charging pad rated at ?
Questions ...
Click to expand...
Click to collapse
No one seems to know much about it yet
Sent from my HTC One using xda premium

Honestly I think this thing looks really shoddy...I mean it looks like the kind of thing I could whip up in my workshop with a spare case. That said, I almost want to buy it, test it, and dissect it to use on a high end case.

exactly. That thing looks easily 100% fake. I pity anyone who believes in the product or that it'll work as advertised.

It looks really cheap. The wires stick out. I can see the wires getting torn from the port very easily

ShatteredAxe said:
Honestly I think this thing looks really shoddy...I mean it looks like the kind of thing I could whip up in my workshop with a spare case. That said, I almost want to buy it, test it, and dissect it to use on a high end case.
Click to expand...
Click to collapse
I swear to God I was thinking the same exact thing
Sent from my HTC One using xda premium

ceelo2008 said:
I swear to God I was thinking the same exact thing
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
If it worked I would use it with an Otterbox and carve out the rubber charing port cover so the plug would be hidden. I think that would be pretty near perfect. The only part that really worries me about that thing are the wires that go to the plug, they don't look near the correct gauge.

ceelo2008 said:
I swear to God I was thinking the same exact thing
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
+1
Too bad, thought some experimental kind of guy already had this and could say if it really is as shoddy as it looks :-/

Well.. Even if it works, what kind of charging station would it work with?
QI? Powermat? Touchstone? doesn't say..

Bought this and I thought I'd share it with you guys. I haven't received it yet though so I can't comment on its quality but there is a xda thread where people have received it. It shipped in 6 hours after purchase btw. I know it's not the same thing but it's a good idea and for the price with free shipping u can't beat it. I have a wireless charging orb with my n4 so I'd love to find a qi compatible case for the H1.
Purchase link http://item.mobileweb.ebay.com/viewitem?index=0&sbk=1&nav=SEARCH&itemId=370836827347
Xda thread link http://forum.xda-developers.com/showthread.php?p=43068818
We see you meow on our nexus⁴ can we haz some more? Ohai there meow aren't u looking sexy >^.^<

DowntownJeffBrown said:
Bought this and I thought I'd share it with you guys. I haven't received it yet though so I can't comment on its quality but there is a xda thread where people have received it. It shipped in 6 hours after purchase btw. I know it's not the same thing but it's a good idea and for the price with free shipping u can't beat it. I have a wireless charging orb with my n4 so I'd love to find a qi compatible case for the H1.
Purchase link http://item.mobileweb.ebay.com/viewitem?index=0&sbk=1&nav=SEARCH&itemId=370836827347
Xda thread link http://forum.xda-developers.com/showthread.php?p=43068818
We see you meow on our nexus⁴ can we haz some more? Ohai there meow aren't u looking sexy >^.^<
Click to expand...
Click to collapse
How did this work out ?