I rooted my phone using the gfree method outlined in the wiki, but made a Nandroid backup of stock before I started anything. I restored the backup; is there anything else I need to do before sending it back?
I noticed that still have the Superuser app in my app drawer, and I wasn't able to follow the instructions for S-OFF here (http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Turning_S-On) as it said "Permission denied" when I type cd /data/local (I also noticed that I don't have the /data/local folder anymore on my sd card).
Gfree gives you an option to turn S-off or S-on, go back to the wiki and re-read it, the code below is copied from the Wiki and I highlighted the options in red for you, just run gfree again with the -s option
Code:
gfree usage:
gfree [-h|-?|--help] [-v|--version] [-s|--secu_flag on|off]
-h | -? | --help: display this message
-v | --version: display program version
-s | --secu_flag[COLOR="red"] on|off[/COLOR]: turn secu_flag [COLOR="Red"]on[/COLOR] or [COLOR="red"]off[/COLOR]
-c | --cid <CID>: set the CID to the 8-char long CID
-S | --sim_unlock: remove the SIMLOCK
-f | --free_all: same as --secu_flag off --sim_unlock --cid 11111111
As far as superusers app, just go into the app manager and remove it.
Sorry, I should've clarified that I don't have gfree anymore. I tried again and this is the prompt I get:
$ su
su
# cd data/local
cd data/local
# chmod 777 gfree
chmod 777 gfree
Unable to chmod gfree: No such file or directory
# ./gfree
./gfree
./gfree: not found
#
Push the gfree file back to data/local and rerun the commands except with -s option read the wiki again and use the right commands.
Sent from my HTC Vision using XDA App
All right, got my phone back to stock unrooted and with S-ON. Here's what I did (note that my circumstances my be different than yours so try this at your own risk):
I rooted and S-OFFed using the rage (v 0.03-this will come into play later) method on the wiki (http://forum.xda-developers.com/wik...sion#Rooting_the_Vision_.28G2.2FDZ.29_and_DHD). I did this right when I got the phone, so no OTA update (I had 1.19). Downloaded ROM Manager and did a Nandroid backup at this point (in my above post I said I made a backup right at the beginning which I was mistaken on). Then I went ahead and flashed CyanMod.
Phone earpiece broke, so I had to get the phone back to stock. First I restored my backup ROM (so back to 1.19 again). Used the unroot guide (http://forum.xda-developers.com/showthread.php?t=835971), and during step one, I got the following error:
E:Board does not support mtd utils.E:Failure at line 344:
write_raw_image PACKAGE:boot.img BOOT:
Installation aborted.
Failure at line 6:
install_zip SDCARD:/stock_root.zip​Some others seemed to get this error as well and it looked benign. Continued and rebooted the phone. Figured this would be a failure, so I followed the HexEditor steps. Turns out the misc.img file was already the right version, but I renamed it and ran dd if=/sdcard/miscnew.img of=/dev/block/mmcblk0p17 just in case.
Step 2 ran without any problems, so now I had a stock phone with S-OFF. To turn it back on, I temp rooted the phone (just follow the TEMP Root steps in the wiki). I then tried to follow the S-ON directions on the wiki (http://forum.xda-developers.com/wiki/index.php?title=HTC_Vision#Turning_S-On), but the phone would automatically reboot after the dd line while not changing S-OFF.
Then I realized that I could use ./gfree -s on to turn S-ON since I was using 0.03, which worked perfectly. Rebooted to remove the temp root, and did a factory restore for good measure, and I believe I have a fairly pristine G2 ready for replacement.
Thanks to all the wikis and threads for their help!
I have a question about restoring to factory settings. Cant you just use the RUU from HTC (if you have a Desire Z that is) and just run that? Wont that just put it back to factory settings?
Related
I'm looking for Gingerbread stock ROM with Sense to unroot my HTC DZ. I've searched in the HTC Desire Z subforum but what I found were either G2/DZ stock Froyo ROM or Gingerbread without Sense.
Can you guide me to find the original stock ROM with sense?
Thanks!
First off, if you rooted with gfree, you need to flash a stock froyo rom to unroot properly.
Then you can flash a gingerbread stock rom, which can be found on shipped-roms.com (which currently seems to be down).
To unroot fully (remove S-OFF, superCID, etc) you need adb set up, gfree, psneuter and the part7backup-xxxxxxxx.bin that gfree created when you ran it (should be on your sdcard)
then flash a stock 1.34 rom (DZ) or 1.19 rom (G2).
Push psneuter and gfree and part7backup to /data/local/tmp
Code:
adb shell
cd /data/local/tmp
chmod 755 *
./psneuter
adb shell
cd /data/local/tmp
./gfree -r part7backup-xxxxxxx.bin
-Nipqer
Nipqer said:
First off, if you rooted with gfree, you need to flash a stock froyo rom to unroot properly.
Then you can flash a gingerbread stock rom, which can be found on shipped-roms.com (which currently seems to be down).
To unroot fully (remove S-OFF, superCID, etc) you need adb set up, gfree, psneuter and the part7backup-xxxxxxxx.bin that gfree created when you ran it (should be on your sdcard)
then flash a stock 1.34 rom (DZ) or 1.19 rom (G2).
Push psneuter and gfree and part7backup to /data/local/tmp
adb shell
cd /data/local/tmp
chmod 755 *
./psneuter
adb shell
cd /data/local/tmp
./gfree -r part7backup-xxxxxxx.bin
-Nipqer
Click to expand...
Click to collapse
Really helpful! Thanks.
But I've removed the part7backup-xxxxxxxx.bin from sdcard (Actually, I've formatted the sdcard). So can't I unroot completely to factory state?
That makes it a little bit more annoying.
Same set up, but the gfree command would change
First we need to know your default cid, so in adb shell do:
Code:
dd if=/dev/block/mmcblk0p17 bs=1 count=8 2>/dev/null; echo
then we need to run gfree like so:
Code:
./gfree -s off -c <CID from previous command>
-Nipqer
Thanks Nipqer!
I'm waiting for shipped-roms.com!
Hi all
I have a European HTC Desire Z with this info:
Android 2.3.3
Sense 2.1
Build 2.42.495.2
Vision PVT Ship S-ON
Hboot-0.85.0013
MicroP-0425
Radio 26.10.04.03_M
eMMC-boot
Apr 11 2011,23:36:27
I am able to temproot this phone with the method provided here:
http://forum.xda-developers.com/showpost.php?p=15851661&postcount=1
using the code:
Code:
$ /data/local/tmp/fre3vo -debug -start FAA90000 -end FFFFFFFF
However the downgrading part fails on me.
After entering the bootloader menu is scans the SDCARD and finds the PC10IMG.zip
telling me: loading...[PC10IMG.zip], after that it's saying: Checking..[PC10IMG.zip].
After checking it just goes back to the Menu without asking me to update etc.
I did however changed the misc_version and followed the guide precisely.
I searched and found some Threads saying this version isn't rootable yet. though they were couple months old, and I am able to get temp root. it should be do-able right?
Can someone please confirm this and tell me how to, or what i'm doing wrong and let this baby free.
I followed the guide to the letter, without changing misc_version or anything, and I managed to downgrade and root without problems on first try. Same version as you, Desire Z bought in Poland.
Just be sure to grab the file for Desire Z and not for T-Mobile G2 and it should work
costipl said:
Just be sure to grab the file for Desire Z and not for T-Mobile G2 and it should work
Click to expand...
Click to collapse
What file are you referring to here?
Also, how is it possible to downgrade without changing the misc_version, i thought it was all about changing that in order to make it work haha.
Sorry, I think I misunderstood your post...
I did this to change misc_version:
Code:
$ adb push misc_version /data/local/tmp/misc_version
$ adb shell chmod 777 /data/local/tmp/misc_version
$ adb shell
# /data/local/tmp/misc_version -s 1.00.000.0
I assumed you changed the "1.00.000.0" to something else (while browsing the forum I found in some threads that people used a different value on DZ).
As for the file I was referring to, I meant the stock rom image - 1.34.405.5_PC10IMG.zip
Maybe you grabbed the file "PC10IMG_Vision_TMOUS_1.19.531.1_Radio_12.21.60.09 b_26.02.01.15_M2_release_149459_signed.zip", which is for G2?
Other than that, I'm not familiar enough with the bootloader to be of any help.
costipl said:
Sorry, I think I misunderstood your post...
I did this to change misc_version:
Code:
$ adb push misc_version /data/local/tmp/misc_version
$ adb shell chmod 777 /data/local/tmp/misc_version
$ adb shell
# /data/local/tmp/misc_version -s 1.00.000.0
I assumed you changed the "1.00.000.0" to something else (while browsing the forum I found in some threads that people used a different value on DZ).
As for the file I was referring to, I meant the stock rom image - 1.34.405.5_PC10IMG.zip
Maybe you grabbed the file "PC10IMG_Vision_TMOUS_1.19.531.1_Radio_12.21.60.09 b_26.02.01.15_M2_release_149459_signed.zip", which is for G2?
Other than that, I'm not familiar enough with the bootloader to be of any help.
Click to expand...
Click to collapse
I redownloaded the zip file and you just made my day i had a other zip from another thread. but with the exact same name.. maybe corrupted ? THANKS!
Radio's get flashed AFTER you flash your ROM, not before ;P
Remember to rename your PC10IMG.zip to something else after you're done rooting/installing a new ROM, cos if anything happens and your phone crashes and you need to enter recovery, having PC10IMG.zip on the root of your SD will ensure that you never get into recovery
Power + Vol Down boots into bootloader, and it automatically scans for updates, PC10IMG.zip being one of them. Only when there are no update files on SD root will it give you a choice of booting into Recovery to well, recover your phone
Hello,
I've had a few requests for help unrooting the Bell Desire Z for warranty purposes.
If you've noticed, there isn't a specific guide for us Bell users, while T-Mobile customers have like a dozen guides scattered around. I figured this out and I should share it.
The really tricky part was figuring out how to get rid of superuser.apk and also get s-on and Bell's CID in the right order, but it turns out it's simple haha. Unfortunately there was not guide for me, so I had to figure this out trial and error and piecing it together from other random posts. I'm not a dev/hacker (well, maybe now I am a novice hacker), so it was a big deal for me (lol) and I can relate to the frustration that comes from not having a good resource.
The exact build my phone shipped with was 1.34.666.5 and other phones may have shipped with other builds, but I've determined that the way Bell operates is that they send their phones to a 3rd party repair facility, and they don't check this (or don't care). However, they may still check whether or not the phone is rooted. So let's unroot it.
DISCLAIMER: Do your own research. I am not responsible for anything bad that happens to your phone after this point (but I will take credit for your success!! ). I used this method successfully and everything worked great. But proceed with caution. If you are unsure, do some looking around. CHECK YOUR MD5 SUMS! Easy MD5 is in the market, and is great.
0. If you have flashed a new radio, flash the old radio back. This one:
http://www.mediafire.com/?9cb8a7jwxob8o6r
NOTE: I'm leaving specific details out of this because if you don't know how to do this, that means you haven't done it before, and you don't need to do this step, and should probably avoid flashing new radios anyway.
1. Download this file:
https://rcpt.yousendit.com/1317004046/ea1de40db3968b867573327c903231bf
-unzip it, and place the folders in /sdcard/clockworkmod/backup/
(recovery will check the md5 sums for you)
2. Reboot into recovery (assuming you have the clockworkmod recovery).
-Do a factory reset (yes, you will lose all your apps etc if you didn't back up)
-Choose Backup/Restore, Advanced Restore, Stock DZ System, System.img
-Choose Backup/Restore, Advanced Restore, Stock DZ Boot, Boot.img
-Reboot
3. Download
http://dl.dropbox.com/u/15272013/Flash Recovery Files.zip
Unzip those files to the root of your sdcard.
PLEASE CHECK THE MD5 of recovery.img AFTER you have unzipped it and placed it on your sdcard!! Sometimes if you check an md5 on your pc and then copy it over, you could still have an error, and then you'll be in a bit of trouble!
md5 of recovery.img: id5d280af717f9afd7ce1c3285c129bc
4. Download the following file:
http://cmw.22aaf3.com/common/gfree_07.zip
md5 (of entire folder): 6916cf05b0805aeac9effdc1725aaa12
unzip and place the file gfree on the root of your sdcard
3. Install Terminal Emulator from the Market. This all needs to be done in the same Terminal Session. Type
$su
#mount -o remount, rw /system
#cp /sdcard/flash_image /system/bin/
#chmod 777 /system/bin/flash_image
#/system/bin/flash_image recovery /sdcard/recovery.img
#cp /sdcard/gfree /data/local/tmp/
#chmod 777 /data/local/tmp/gfree
#rm /system/app/superuser.apk
#/data/local/tmp/gfree -s on -c BM___001
Now when you reboot your phone, you will have an unrooted phone, stock. For clarity, you have:
-Stock, Unrooted Bell ROM 1.34.666.5
-Stock, Matching Radio
-S-Off HBoot
-Proper Bell CID
-Superuser.apk nowhere to be found
The only loose ends are that flash_image will still be in your /system/bin and if you flashed the eng hboot, your hboot number may not match. I'm 99.9% certain nobody at the repair facility will look or care about it. Also, I'd prefer you avoid flashing your hboot, since that is singly the most risky thing you can do with your phone.
If anybody knows whether the flash_image binary works in /data/local/tmp, let me know and I'll edit the post.
Note: when you get your phone back, it will have the latest GB RUU on it. This will give you a bit of trouble re-rooting it. There is no way around having them flash the latest firmware on it, since it's the very first thing they do before they diagnose your phone.
Thanks to Football for information on shipped builds and mxpxboi for his rooted 1.34.666.5 nandroid files.
Cheers!
JT
jontornblom said:
3. Install Terminal Emulator from the Market. This all needs to be done in the same Terminal Session. Type
$su
#mount -o remount, rw /system
#cp /sdcard/flash_image /system/bin/
#chmod 777 /system/bin/flash_image
#/system/bin/flash_image recovery /sdcard/recovery.img
#cp /sdcard/gfree /data/local/tmp/
#chmod777 /system/bin/gfree
#rm /system/app/superuser.apk
#/data/local/tmp/gfree -s on -c BM___001
Click to expand...
Click to collapse
Thanks for the help jontornblom. Quick question:
I am receiving the error message saying /system/bin/gfree no such directory.
Any Tips?
Merzennary said:
Thanks for the help jontornblom. Quick question:
I am receiving the error message saying /system/bin/gfree no such directory.
Any Tips?
Click to expand...
Click to collapse
Did you accidentally type a "/" after gfree?
Sent from my Nexus 6 like tears in rain.
good job - thx for this guide
jontornblom said:
$su
#mount -o remount, rw /system
#cp /sdcard/flash_image /system/bin/
#chmod 777 /system/bin/flash_image
#/system/bin/flash_image recovery /sdcard/recovery.img
#cp /sdcard/gfree /data/local/tmp/
#chmod777 /system/bin/gfree
#rm /system/app/superuser.apk
#/data/local/tmp/gfree -s on -c BM___001
Click to expand...
Click to collapse
There are a couple of small typos in this code. In the second chmod there should be a space between "chmod" and "777". More importantly though, that second chmod should be on "/data/local/tmp/gfree" since that's where it's been copied
Sent from my Desire Z running CM7.
steviewevie said:
There are a couple of small typos in this code. In the second chmod there should be a space between "chmod" and "777". More importantly though, that second chmod should be on "/data/local/tmp/gfree" since that's where it's been copied
Sent from my Desire Z running CM7.
Click to expand...
Click to collapse
Thanks! Sorry about that =( I will edit the OP
Edit: okay, typos fixed. My apologies to anyone who ran into trouble because of this.
Sent from my Nexus 6 like tears in rain.
jontornblom said:
Hello,
1. Download this file:
...yousendit.com/1317004046/....3968b867573327c903231bf
-unzip it, and place the folders in /sdcard/clockworkmod/backup/
(recovery will check the md5 sums for you)
Click to expand...
Click to collapse
Could someone re-upload file from step 1?
Hi,
I too could use the file from Step 1. And there is a little urgency as I need to get my DZ back to stock as soon as possible.
Your help is appreciated...greatly!
Thanks.
Hi,
I had to return to stock rom for warranty and now i am trying to root it again. i have completed root and s-off operations but i can't enter recovery. when i select recovery from bootloader menu, i only see exclamation mark with black screen...
i entered these commands but second command gave me "gfree -y: unknown operation". how can i solve this?
Code:
4.a.2. gfree, install hboot and clockworkmod recovery
In the root shell (indicated by the #) that you got in the Temporary root section execute the following commands:
# cd /data/local/tmp
[B][U]# ./gfree -f -b hboot-eng.img -y recovery.img[/U][/B]
# ./root_psn
# sync
Means you are running an older version of gfree.
Only gfree 0.7 supports the -y arg.
You can find it here
(to find out what version of gfree you have, use ./gfree -v )
-Nipqer
Nipqer said:
Means you are running an older version of gfree.
Only gfree 0.7 supports the -y arg.
You can find it here
(to find out what version of gfree you have, use ./gfree -v )
-Nipqer
Click to expand...
Click to collapse
Thank you for your help but now the same command is giving me "./gfree: permission denied". why should it be?
Did you use the chmod command? Check the wiki, but it will probably be something like "chmod 755 /path/to/gfree"
chmod 755 /data/local/tmp/*
Also the command might have to be:
/data/local/tmp/gfree -v
to run gfree, unless you cd to /data/local/tmp (or wherever you pushed gfree to), in which case the '.' in './gfree' means 'this directory'
-Nipqer
Thank you all for help. Everyday i had another error. For example today i got psneuter error but i finally installed recovery...
Sent from my HTC Vision using xda premium
Hi. I did a factory reset and now I cannot get past the white HTC welcome screen. I don't have the phone rooted, hboot says S-ON. I had USB debugging disabled when doing the reset, so now I can't turn it on (since I won't get anywhere near the actual system).
Also, I don't know if this is the cause of not having USB debugging on - adb can't seem to find my device. When connected, it shows HBOOT USB PLUG, but adb devices returns an empty list..
Is there a way I can root/unlock the phone, without having debugging on, so that I can flash a recovery and a new system?
Thanks
Not too likely, adb will never work in bootloader mode but fastboot should. adb only works in os and recovery.
What you'll need to do is flash an RUU through bootloader or fastboot to get things working again. Check the development section here for a list of the latest RUUs for the vision
Sent from my Nexus 4 using XDA Premium 4 mobile app
I was swamped and got back to it by now. Thank you for your suggestion. It doesn't work though.
I downloaded the newest RUU from htcdev.com, the phone did get recognized by fastboot and the RUU installer seemed happy. However, when the actual update started, it got stuck on "Rebooting bootloader" or similar for over half an hour. That's when I decided to cancel it.
Next on, I tried steps shown here: androidforums .c o m/htc-desire-s/678126-desire-s-stuck-bootloader.html
fastboot erase cache - this got stuck on 'erasing cache', nothing happened afterwards
fastboot oem rebootRUU - this wrote "..." and nothing else happened
Is there anything else I can try?
ROOT
http://forum.xda-developers.com/showthread.php?t=2348266
http://forum.xda-developers.com/showthread.php?t=1178912
http://forum.xda-developers.com/wiki/HTC_Vision
How To Get R/W Access (Permanent Root / "Permaroot") using gfree v1.0[edit]
Prerequisites
Having the proper USB drivers installed - HTC Sync including Windows USB Drivers for the Vision
Disable auto-run or uninstall Visionary if you have it (It's important!)
adb (installed as part of the Android SDK.) See this guide on how to install/setup adb on your PC.
The HTC Desire Z with a firmware version higher than 1.34, T-Mobile G2 with a firmware version higher than 1.22 and the Desire HD with a firmware version higher then 1.32 have to be downgraded before proceeding.
Downgrading HTC Desire Z, T-Mobile G2 and Desire HD
For the 1.XX firmware HTC Desire Z follow this guide Downgrade DZ till step 12 and then come back.
For the 1.XX firmware HTC Desire HD follow this guide Downgrade HD and then come back.
For the 2.XX firmware HTC Desire Z/Desire HD and T-Mobile G2 follow this guide GUIDE Downgrade G2 2.13.531.8 (2.3.3 T-Mobile Rom w/ S-ON) & DZ 2.3.3 w/ S-ON" and come back. The history can be found in this thread New exploit works with Gingerbread! and Desire Z users see this posting of the thread Desire Z explanation.
Please use your brain when following these postings / guides. Especially make sure that you use a PC10IMG.zip for your device!
1. Necessary files
psneuter psneuter.zip (md5sum 89c2dec8d72d87b4c669f44dd31c8d17)
gfree v1.0 gfree_10.zip (md5sum 0bc9fc22bda897c765b02066f8a3c83b)
root_psn root_psn.zip (md5sum c8fe38ef55eb8951def9ff17b2eb99c1)
Superuser package su-2.3.6.2-efgh.zip (md5sum 43d9a40b63e916635d5ad7ca32433fab)
1.1. engineering hboot
Download the appropriate HBOOT for your phone:
T-Mobile G2: vision.hboot-0.76.2000.zip / Mirror (md5sum 7669AE12DC2FAA10AE555A164980EFD0)
HTC Desire Z: vision.hboot-0.84.2000.zip / Mirrors in this thread (md5sum 2CE1BDD5E4C1119CCFCECB938710D742)
HTC Desire HD: ace_glacier.hboot-0.85.2007.zip (md5sum df4fd77f44993eb05a4732210d2eddc6)
Note that the md5sums are for the actual hboot img contained within the zip file, not the for the zip file itself. Note also that the dz, g2, and dhd each use their own version of the engineering boot, as the phones are partitioned differently. (If you have previously installed the wrong HBOOT for your phone, you may need to reflash everything after partition 18)
1.2. clockwork recovery
Download the appropriate clockwork recovery for your phone:
ClockworkMod Recovery 5.0:
T-Mobile G2 and HTC Desire Z: recovery-clockwork-5.0.2.7-vision.img (md5sum 87a428549440894dbe2f96dd5efc4fb5)
HTC Desire HD: recovery-clockwork-5.0.2.0-ace.img (md5sum b8d77b9352dcbb41839e45342ea35658)
ClockworkMod Recovery 5.8 (touch):
T-Mobile G2 and HTC Desire Z: recovery-clockwork-touch-5.8.1.0-vision.img (md5sum b21aa5a0d593b6ebce880be3316ff64a)
HTC Desire HD: recovery-clockwork-touch-5.8.1.5-ace.img (md5sum fd6abfbc459663455a25b88ca7d77442)
Rename the file to 'recovery-clockwork.img'.
2. Copy the files to the phone
Before you can adb as described below you need to enable debugging in the settings on the phone. In Settings go to "Applications -> Development" and check the "USB debugging" option.
Connect the phone to the USB of your PC. The phone will stay connected during the complete procedure.
Make sure that you do NOT turn on USB storage. There has to be a sdcard in the phone and it has to be mounted to the phone!
In the commands to run below, $ or # represent the prompt and should NOT be entered as part of the commands (in Windows this will be something like C:\> instead).
Unpack all the zip files to a directory on your PC. Open a terminal (or command window) on your PC and change the current directory to where the files are on your PC and execute these commands:
$ adb push psneuter /data/local/tmp/
$ adb push gfree /data/local/tmp/
$ adb push busybox /data/local/tmp/
$ adb push hboot-eng.img /data/local/tmp/
$ adb push root_psn /data/local/tmp/
$ adb push su /sdcard/
$ adb push Superuser.apk /sdcard/
$ adb shell chmod 755 /data/local/tmp/*
2. clockwork recovery for T-Mobile G2 and HTC Desire Z
To copy your clockwork recovery execute the following command in the terminal or command window
$ adb push recovery-clockwork.img /data/local/tmp/recovery.img
3. Temporary root
In the terminal (or command window) execute these commands:
$ adb shell /data/local/tmp/psneuter
$ adb shell
after the last command you should have a root shell in adb (this is indicated by a # prompt). Leave this terminal (or command window) that contains the root shell open.
4 S-OFF, root and its friends Super-CID, SIM-unlock, engineering hboot, clockwork recovery and root
In the following section we are trying to gain write access to the emmc by power cycling it.
We recommend to install the engineering hboot as part of the gfree procedure.
In the root shell (indicated by the #) that you got in the Temporary root section execute the following commands:
# cd /data/local/tmp
# ./gfree -f -b hboot-eng.img -y recovery.img
# ./root_psn
# sync
Wait a few seconds for the changes to "take".
4.1. Automatic gfree hboot verification
As it is very important that the hboot was installed correctly gfree calculates md5sums of the partition. It will calculate the following 3 checksums
md5sum #1 - checksum of partition 18 before the installation
md5sum #2 - checksum of the hboot image that should be installed
md5sum #3 - checksum of partition 18 after the installation
gfree will check the md5sums and give you a proper success or error message. The messages are explained in detail at gfree-wiki
The messages that you want to see are either:
md5sum #1 == md5sum #2 - the hboot image is already installed -> skipping installation
or
md5sum #3 == md5sum #2 - the hboot image was successfully installed -> OK!
If you get a different error message you should run for help at #G2ROOT on Freenode.
If you got one of the two success messages described above -> You are fine, Reboot your phone by executing the following command in the root shell (indicated by the #):
# reboot
5. Verify the success of gfree
You can verify the success of gfree by using gfree_verify.
Download gfree_verify.zip from gfree_verify_v01.zip (md5sum 8e3535fd720d19fa0aec4eb711b897c4)
Unzip gfree_verify_v01.zip to a place on your PC.
Open a terminal (or command window) on your PC and change the current directory to where the files are on your PC and execute these commands:
$ adb push gfree_verify /data/local/tmp
$ adb shell chmod 755 /data/local/tmp/gfree_verify
$ adb shell
In this shell:
Remark: When you run su for the first time in the adb shell make sure the the screen of the phone is unlocked. Because when you enter the command the Superuser app will show up and ask you if you want to grant superuser access to app Unknown (2000).
Check the Remember check box and click allow.
$ su
# cd /data/local/tmp
# stop ril-daemon
# ./gfree_verify
You should see the following output:
gfree verify_cid returned:
@cid: 11111111
OK
gfree verify_secu_flag returned:
@secu_flag: 0
OK
gfree verify_simlock returned:
@simlock= 00
OK
Start the interface layer again (IN THE ADB SHELL ON YOUR PC):
# start ril-daemon
Did it work? Here's what you're looking for:
@cid: 11111111 <--- this response means you have superCID!
@simlock= 00 <--- this means your simlock is off.
@secu_flag: 0 <--- this means your radio is S-OFF.
6. Backup and cleanup
During the process gfree created backups of the partitions that it changed on your sdcard in /sdcard/
The files are called /sdcard/part7backup-.bin, part18backup-<time>.bin (if you installed hboot) and part21backup-<time>.bin. It is highly recommended that you copy these files to a save location on your PC and keep them!
You can delete the files in /data/local/tmp they are not needed anymore.
7. Next steps
Find a custom rom that you would like to install and install it using the clockwork recovery.
Enjoy the freedom of your phone.
If you like free phones and our work we would like to ask you to support the EFF.
Support the EFF[edit]
or
http://forum.xda-developers.com/showthread.php?t=1097977