[Q] Please help with unroot - Desire Q&A, Help & Troubleshooting

HELP!
I rooted my phone using unrevoked forever and now that I want it back to stock I'm unable to do so. I have been searching and trying stuff for a week now with no results.
I have a Norwegian (english display language) not locked HTC Desire.
Hboot v: 0.97.0001
I constantly keep getting "wrong bootloader version" (error 140).
I have tried using the method from android modaco com (cannot post link, not allowed )
1 Make sure your goldcard is in your phone (If Required)
2 Turn your Desire on
3 Connect it to a Windows PC
4 Run the HTC RUU
5 Let it run
6 & YOUR DONE!
(without gold card).
I think the problem is that I'm using wrong RUUs, but I cannot seem too find the right one.
Can anyone help me?
PS: If you can supply a step by step guide I would be very grateful. I don't have a lot of experience with this sort of thing.

forgot to mention.
I have s-on

What ROM was on the phone when you first got it?

When I first got the phone was just after release though I don't remember the version. I rooted the phone last week so it hasn't been that long since I last did an update.

Without knowing the version there's no way of knowing what RUU you need. The only thing you can try is:
1. Make a gold card:
http://android.modaco.com/content/software/308798/pc-application-goldcardtool/
2. Downgrade to an earlier HBOOT:
http://forum.xda-developers.com/showthread.php?t=768256
3. Flash the latest WWE RUU (2.29.405.5)
http://www.google.co.uk/url?sa=t&so...cZlrId8Dkc9IAPJsg&sig2=QNe-C8tewW0x4cdsO7aCXA
OR
http://www.google.co.uk/url?sa=t&so...IwRiRP-6PYkibAtPA&sig2=OT9aE7a-DDKInlx4lTxTjw

Is there any way to find the version now or am I boned?

There's no way know without having the ROM on the phone

I have only rooted the phone. I have not installed any new ROM though.

Software info:
Android: 2.2
Baseband version: 32.49.00.32U_5.11.05.27
Kernel version: 2.6.32.15
Build number: 2.29.405.2
Software number: 2.29.405.2

Ah, OK!! That's alright then!!
Just download the RUU I linked to up there and do the following:
1. Turn off phone
2. Turn it on holding the back button
3. Once at the white screen with FASTBOOT at the top connect to the PC
4. Once it says 'FASTBOOT USB' (and the drivers have installed) run the RUU
5. Allow it to complete
Job done

Great!
Gonna try it as soon as I have the RUU (slow network connection).
Damn, I can only thank you once
Thanks a million!

The one thing I would double-check is the HBOOT version on your phone - you sure it's not 0.93 and not 0.97?
Only reason I ask is that ROM version (both 2.29.405.2 and 2.29.405.5) both have HBOOT 0.93 in them and you can't flash them if yours is higher

It worked !
The HBOOT version was probably just me misremembering.
Thanks so much!

No worries, keep the RUU safe in case you need it again

Hi,sorry to hijack this thread.i need to clear some doubts abt unrooting,almost similar scenerio.
i think my front speakers are dead.from emiui 12.11 to miui-au 12.24 still not able to resolve the issue.thus need to unroot to stock to see whether it is working there or have to send it for warranty.
The phone originally came with:
Android Version
2.2
Baseband version
32.44.00.32U_5.09.05.30_2
Kernal version
2.6.32.15-gd96f2c0
[email protected]#1
Build number
2.13.707.1 CL233262 release-keys
Software number
2.13.707.1
So my qn is when i see miui-au build no is :MIUI_AU 0.12.24 R2,what's the build no as in 2.xx.xxx??Or miui have their own build?
I have already downloaded RUU_Bravo_Froyo_hTC_Asia_WWE_2.13.707.1_Radio_32.44.00.32U_5.09.05.30_2_release_143921_signed.exe
can i use this?
Another confusion from me is goldcard.My phone is bought from local carrier(Singtel,SG).does that means it is network branded?
Thanks!

If you're using 2.13.707.1 you should be OK to use that RUU without a gold card. Try it and see

so custom roms have no effect on build no.?
is there any diff running the ruu w or w/o goldcard?
oh..so i should follow the instructions on yr post and run the ruu from bootloader?

Related

[Q] do original RUUs restore recovery image?

Hi all, would like to know if, after installing a custom ROM, if i use a RUU will the recovery image be restored to default?
Thanks in advance!
Yes it Will
Yay! thank you! so just using the RUUs i will totally reset my desire, so HTC won't be able to tell if it's been rooted before?
Don't know whether they can't tell, whether they look if they've no need to I don't know...so long as it's on a stock ROM I don't think they'd check
lambdafreak said:
Hi all, would like to know if, after installing a custom ROM, if i use a RUU will the recovery image be restored to default?
Thanks in advance!
Click to expand...
Click to collapse
What is a RUU and how can I do it, as I'm having the same problem.
I rooted to allow Titanium Backup to have root after using unrevoked but wasn’t aware that meant I also had a custom rom installed now.
I’ve been told I need to RUU as well.
RUU = ROM Upgrade Utility
It's the official way of flashing a ROM. Each phone has a software version running on it when you first get it and you should make a note of the one on yours before doing anything root-related for the very reason that if something goes wrong you can revert back to stock. Not all versions are available, e.g. there are no Orange RUUs about, but the ones that are can be found here:
http://shipped-roms.com/index.php?category=android&model=Bravo
If you didn't happen to make a note of yours then it's hard to say what it came with. If you've only rooted and NOT flashed a new ROM yet then if you go to Settings>About phone>Software information and post the software version we might be able to help
Thanks for all the information it helps fill in some blanks.
I dont think I have put a different rom on it, I only rooted using revoked- does that mean it has a different rom now?
and my settings show
Android 2.2
Baseband version 32.46.00.32U_5.10.05.17_2
Kernel version 2.6.32.15-gd96f2c0 [email protected] #1
Build number 2.12.110.2 CL232610 release-keys
Software number 2.12.110.2
on a side note the link you posted - what do the numbers correspond to, my Kernel or build
Right you're on a T-Mobile FroYo ROM but the issue is there isn't that versions RUU available...how long have you had your Desire?
Damm.
I got mine in April this year, why do you ask.
Can I not use RUU_Bravo_Froyo_TMO_AT_2.12.112.1_Radio_32.46.00.32U_5.10.05.17_2_release_143754_signed.exe?
You CAN use that but it's the Austrian one...the reason I ask is to find out the screen type, you should be on an AMOLED screen so you can flash the older 1.21.110.4 RUU if you need to - you'll need a gold card to do it, though, I believe
http://shipped-roms.com/download.ph...00.28U_4.06.00.02_2_release_127570_signed.exe
If I do flash the older 1.21.110.4 version, are there any drawbacks, or will I just be able to update through OTA updates that will then be available to me through T-mobile to get me back to normal?
Also is there a best way to do this RUU as I have seen a few guides, can you recommend any to follow.
The way I'd do it is:
1. Download that RUU
2. Have gold card in your phone and HTC Sync installed on your PC
3. Connect phone to PC and select 'HTC Sync' from the options on the phone
4. Once HTC Sync on the PC shows connected, run the RUU
5. All being correct it'll flash the ROM
6. Assuming it's worked, you should get the OTA updates again as you did before
Replying on here and androidforums is getting confusing!!!
Thanks for all the help and I hope those instructions were meant for me and not some one else
Maybe you have to downgrade your hboot to 0.75.
Sent from my HTC Desire using newest version of swype and the XDA App
digo21 said:
Thanks for all the help and I hope those instructions were meant for me and not some one else
Click to expand...
Click to collapse
Yes they're for you but there's someone on androidforums with EXACTLY the same issue - you sure you're not the same person??
Nope thats not me
I followed all the procedures. But the RUU gave me an error after a few minutes saying 'Error 140 Bootloader version error'.
What does that mean and how can I fix it.
Which RUU are you trying to use? And which HBOOT are you on now?
Im trying to use the one you recommended above RUU_Bravo_TMO_UK_1.21.110.4_Radio_32.36.00.28U_4.06.00.02_2_release_127570_signed.exe
Bootloader version I found out by holding the back key and power button to swithc on, it says HBOOT - 0.93.0001

[Q] Help me "bootloader corrupt do not reboot"

Help me!
i would like use the tool EasyS-OFF and when i select "Desire HD easy s-off"
i had a message "bootloader corrupt do not reboot"
- ROM: Android HTC Revolution HD 2.0.7
- Recovery: CWM 2.5.1.3
- radio swih s-off
please help !!!
From what i know radio s-off works on 1.32 base roms. But better wait for a more accurate answer.
Sent from my LeeDroided Desire HD
Try the tool again. But as mariosraptor said, you should not run it on custom roms (custom kernel).
I try again but it's same thing
And now the screnn of my DHD is white with this message "Sudden closure of the application HTC sense"
Yep, that is normal, you should have read the thread more carefully. I posted a new version of the tool, which checks a bit more stuff. You should try it. If it gives the same result, you will have to revert to older, stock rom and then run the tool. After you run 0.4 version of the tool, you can reboot.
I try the new tool but it stop with the message "do you have root" and i didn' have message on my DHD.
How to revert to older rom ?
Okay, restore a nandroid backup or use HTC RUU.
I try
Thank you for your help
Thank you i revert to RUU 1.32 and evrything is OK and tool 0.4 work very well
Thank you !!!!!!!!!!!!!!
Cool
I am glad it worked in the end.
xthierry said:
Thank you i revert to RUU 1.32 and evrything is OK and tool 0.4 work very well
Thank you !!!!!!!!!!!!!!
Click to expand...
Click to collapse
how can I revert to RUU 1.32??? we had the same problem but im on a stock rom. done rooting and radio s-off but failed here in EasyS-off
I'm also on the same situation.
I rooted with visionary. I installed HTC Synced 3.0. Checked on Usb Debugging already. And this was the first time I ran EasyS-off (05). And I ticked on "I have Radio S-OFF". Almost at the end, it say "Bootloader corrupt, Do not Reboot, Seek help from XDA".
Pls help me.
I inst
Run it again. Which ROM do you have? Try another PC.
jkoljo said:
Run it again. Which ROM do you have? Try another PC.
Click to expand...
Click to collapse
I'm running HTC Stock Rom, I think, no brand.
Code:
Android Version 2.2
Basehand Version 12.28b.60.140eU_26.03.02.26_M
Kernel Version 2.6.32.21-g66cfb7a | [email protected]#1 | Tue Oct 26 15:58:17 CST 2010
Build Number: 1.32.707.5 CL277010 release-keys
Software Number: 1.32.707.5
Browser version: Webkit 3.1
On the same PC, I ran again, without the "I have radio S-off" box checked, it says "Do you have root?". I ran a gain with the box checked and it says it failed to make changes to bootloader. I unroot (don't know why I did that) with Visionary, it rebooted ok. I rooted it again already. . But a little bit afraid now, cos' I had no experience in rom flashing.
Edit:
Oh my love, I ran it AGAIN, and this time without the box checked. And it said "All DONE".
Same problem as xthierry "bootloader is corrupt, do not reboot. Contact XDA for help"
I used this guide to downgrade from 1.72 to 1.32 software version, then used this guide for trying to flash a custom rom. Radio S-OFF, Super CID from Easy Radio tool v2.2 went just fine. Then started Easy S-OFF_5 and checked option I have Radio S-OFF and pressed S-OFF it! button. This time no acces was required on my phone, and the message "bootloader is corrupt, do not reboot. Contact XDA for help" appeared. I tried again to press S-OFF it! and it said "Error: Connection problem!".
This is most similar post I could find and someone said to run Easy S-OFF v4 but I only can find v5 on site. And I didn't understand exactly what tools should I use in order to restore bootloader to solve the problem in case of broken bootloader.
Thank you very much, you're doing a great job within this community!
Problem solved, I remade the downgrade and I haven't tried again to install Easy S-OFF, cause I don't need to flash any radio, I just wanted to unlock SIM
Glad to see your DHD not bricked
Bootloader Corrupt error
Hi,
I have a HTC Desire HD running Android 2.2 [Build #: 1.32 Software: 1.32] - completely stock out of the box with standard vodafone (australia) rom still installed.
i have run through the steps outlined here
i have rooted using VISIONary and performed the RADIO S-OFF, Super-CID and Sim Unlock section without issue.
When i attempt to run "Desire HD easy s-off.exe" [EasyS-OFF_05] with "i have RADIO S-OFF" box checked, i receive the message "bootloader corrupt, DO NOT REBOOT! Seek help from XDA!" about half way through.
i have attempted running it again and receive "connection error" (with and without the "i have RADIO S-OFF" box selected).
i have downloaded EasyS-OFF_04 and run this but i still receive connection error. USB is definately conneted in charge only and USB debugging is enabled.
i have not yet rebooted the phone as i am not sure if it is safe to do so. any help would be much appreciated. I have not flashed the radio or ROM as i have seen other threads advising that you must have eng S-OFF before flashing the ROM - is this accurate?
i have seen HTC RUU mentioned but im not entirely sure what this is and whether is pertains to my situation.
Again any help would be greatly appreciated.
Thank You.
EDIT: formatted the SD card then rebooted phone ok - continued with rom flashing guide in above link. all is working well.
teekay87 said:
Hi,
I have a HTC Desire HD running Android 2.2 [Build #: 1.32 Software: 1.32] - completely stock out of the box with standard vodafone (australia) rom still installed.
i have run through the steps outlined here
i have rooted using VISIONary and performed the RADIO S-OFF, Super-CID and Sim Unlock section without issue.
When i attempt to run "Desire HD easy s-off.exe" [EasyS-OFF_05] with "i have RADIO S-OFF" box checked, i receive the message "bootloader corrupt, DO NOT REBOOT! Seek help from XDA!" about half way through.
i have attempted running it again and receive "connection error" (with and without the "i have RADIO S-OFF" box selected).
i have downloaded EasyS-OFF_04 and run this but i still receive connection error. USB is definately conneted in charge only and USB debugging is enabled.
i have not yet rebooted the phone as i am not sure if it is safe to do so. any help would be much appreciated. I have not flashed the radio or ROM as i have seen other threads advising that you must have eng S-OFF before flashing the ROM - is this accurate?
i have seen HTC RUU mentioned but im not entirely sure what this is and whether is pertains to my situation.
Again any help would be greatly appreciated.
Thank You.
Click to expand...
Click to collapse
try looking through this thread - other people have experienced Superuser issues and been ok - I'd pm jkoljo for proper advice
http://forum.xda-developers.com/showthread.php?t=855403&page=48
EasyS-OFF_05.zip is the current version, the sw creates a backup of the original hboot ....... sdcard/hboot_original.bin if it did the first post in the thread gives instruction on how to restore it, if there is no backup the original may be untouched
I don't get it.
The 0.5 did not work. But the 0.4 did

Which RUU i Need??

Plz solve my problem
i have unrooted Desire purchased from my UK friend
PVT1 S-off
Radio: 32.49.00.32U_5.11.05.27
ROM: HTC sense 2.2
Bootloader: 0.93.0001
my phone has no apps of Vodafone even normal HTC quietly brilliant Boot animation
but last time when i updated it showed OTA update of
RUU_Bravo_Vodafone_UK_32.49.00.32U_5.11.05.27....
when it was on 2.1 eclair there was Vodafone theme ( menu<Scene<HTc Scen
This means my phone Is Branded???
is there is any other way to check that my phone is branded or not??
Does i have to make a gold card??
Which RUU i needed so that when some thing happen wrong during Installing Custom Rom i can revert back to original Rom???
To check if your phone is branded:
Get android system info from market. Start it>system>build infos>brand.
Yes, you can go back to original rom. Just flash latest fitting ruu. You need a goldcard to avoid cid error when flashing ruu.
Swyped from Oxygen
Thanks for helping bro.
Downloaded Android sysyem info in
Brand it says "Vodafone_uk"
For Current Rom which RUU should i use Can u link here ???
how can i install WWE (world wide...)
RUU_Bravo_Froyo_HTC_WWE_2.29.405.2_Radio_32.49.00.32U_5.11.05.27_release_151783_
signed.exe version of Rom so that i get latest GB update by HTC in future
any procedure to do this???
First create goldcard:
http://android.modaco.comcontent/software/308798/pc-application-goldcardtool/
Put this in your desire. Now start the downloaded stock ruu on your computer and follow the instructions.
Swyped from Oxygen
thanks bro
plz at least post my Current RUU here so that i can download.
sorry no spare SD card at the moment
so going for purchase right now.
Should be this one:
http://shipped-roms.com/download.ph....00.32U_5.11.05.27_release_157522_signed.exe
Swyped from Oxygen
thanks bro
My phone is unlocked to any sim does flashing with this RUU lock it again.
nos in veins said:
thanks bro
My phone is unlocked to any sim does flashing with this RUU lock it again.
Click to expand...
Click to collapse
I guess not.
Swyped from Oxygen
you are the only person helping me out thanks bro
God bless you
nos in veins said:
you are the only person helping me out thanks bro
God bless you
Click to expand...
Click to collapse
No problem, thank you. I wish you the same.
Swyped from Oxygen
Thanks
same question for mine baby.
i saw no point in a new thread so here i go.
which one is for me ? i found one but i'm not sure and i really don't wanna mess up.
This is what i found :
RUU_Bravo_Froyo_HTC_WWE_2.29.405.5_Radio_32.49.00. 32U_5.11.05.27_release
My baby is :
BRAVO PVT4 SHIP S-ON
HBOOT-0.93.0001
TOUCH PANEL-SYNW0101
RADIO-5.11.05.14
Aug 10 2010,17:52:18
====================
Android Version
2.2
Baseband Version
32.48.00.32U_5.11.05.14
Kernel Version
2.6.32.15-g5d39305
[email protected]#1
Build number
2.25.771.1 CL254759 release-keys
Software number
2.25.771.1
Browser version
WebKit 3.1
Brand
h3g_uk
This one is the right for you:
http://shipped-roms.com/download.ph...8.00.32U_5.11.05.14_release_149217_signed.exe
The one you found out is the stock one from htc without any branding. The one i posted is the one which fits with your branding.
Thank you very much.
I will give it a go after i download everything i need and finish going trough the tutorial at least 2 times ( and hope for the best ).
Flash a few phones but this is my first HTC...
One more question please:
If i flash it will i be able to use sim cards from other networks ?
Blue_Monk said:
Thank you very much.
I will give it a go after i download everything i need and finish going trough the tutorial at least 2 times ( and hope for the best ).
Flash a few phones but this is my first HTC...
One more question please:
If i flash it will i be able to use sim cards from other networks ?
Click to expand...
Click to collapse
If you were before, then yes. If you weren't before, the answer is no. But you can find a sim unlock utility here.
Tried and tested sim unlock utility: http://forum.xda-developers.com/showthread.php?t=943726
Got it. Thank you both.
I think i must update my knowledge about phones as i am a little behind (ok. i admit it... a lot behind).
And a small thing. unrevoked3 does the rooting and S-OFF so in the tutorial here :
http://forum.xda-developers.com/showthread.php?t=1016084
2 steps are kinda outdated (at least that's what i understand reading the QA from
unrevoked3
Unrevoked does the rooting, alpharev does the s-off. All steps described in this tutorial might be old, but they still work.
Swyped from Oxygen
Can anyone tell
How to check that Goldcard is made perfect,
Formated to FAT32 done all stuff
i tried Golddcard tool ,also using Hexeditor every time - Name of
SD card changed to Goldcard but still my phone put all its files like .lostdir etc and i am able to open or access that Goldcard by using PC is this right or i am doing Wrong???

[Q] Htc Desire - Trying to Un-Root it (Expansys Version)

Hello everyone,
I have a HTC Desire 18181 that i want to sell it, and therefore unroot it to the starting condition.
My info are:
baseband version: 32.49.00.32U_5.11.05.27
Kernel version: 2.6.32.15-Froyo_bravo_vs Root at Athena #9
My current version: 2.29.405.5 Droidzone - Starburst 1.3.3.5
I tried many roms from Shipped Roms but i cant seem to find my version. All the roms i tested produce either the result that its not the appropiate rom or a strange error that reports that my battery is below 30% (its 90%!!)
Anyone can help, will be appreciated
lanc3lot said:
Hello everyone,
I have a HTC Desire 18181 that i want to sell it, and therefore unroot it to the starting condition.
My info are:
baseband version: 32.49.00.32U_5.11.05.27
Kernel version: 2.6.32.15-Froyo_bravo_vs Root at Athena #9
My current version: 2.29.405.5 Droidzone - Starburst 1.3.3.5
I tried many roms from Shipped Roms but i cant seem to find my version. All the roms i tested produce either the result that its not the appropiate rom or a strange error that reports that my battery is below 30% (its 90%!!)
Anyone can help, will be appreciated
Click to expand...
Click to collapse
Hi. Follow these steps and you will be back stock and no S-OFF or ROOT.
First of all get the latest RUU WWE 2.29.405.5. Extract the PB99IMG.zip file from the RUU: here it is how: http://forum.xda-developers.com/showthread.php?t=880268 -2nd post.
Also make sure you don't have a custom HBOOT (in bootloader the version of HBOOT should look like this if it is custom: 6.93.0001 and at the top should write Alpharev and something else) or you will need first to flash the HBOOT downgrader prior to running the RUU.
You will need to a Gold Card if your phone was branded.
1. Extract the PB99IMG.zip and put it on root of SD Card.
2. Reboot in bootloader (Volume-Down + Power)
3. It will automatically load the img and ask you if you want to install
4. Check Yes and follow onscreen progress.
5. Wait untill it finnishes
6. I think it will reboot itself, if not scroll down to the Reboot obtion and press Power button to select.
Follow this guide for Gold Card:
droidzone
Old said:
4. Do I need a Goldcard?
If you have a recent version of the RUU for your Device, available on Shipped Roms, you dont need a goldcard. This is the usual scenario for people who purchased their Desire in Europe, and so have an unbranded Desire. All Branded Desires need a correct branded version of the RUU, and any other RUU including WWE (Worldwide English, or European) RUU will not work for them. Also if an unbranded Desire user wishes to change RUU to a branded version, he will need a Goldcard. This is because all Desires have a particular software tag in the Rom, called the InfoCID. This dictates the Region code. For Eg. An Indian Desire is branded and has InfoCID of HTC__038. When you change a RUU to different region, what you actually do is reset the InfoCID setting. Changing the InfoCID setting requires a Goldcard.
5. What is a Goldcard?
It is a normal MicroUSB card specially prepared in such a way that its Sector 0 (which normally doesnt hold anything useful) is modified, so that it signals to the HTC RUU that the InfoCID may be changed.
6. How do I create a Goldcard?
Just download this tool (Credits and All Rights by [email protected]), and run it.
7. Can you tell me more about Goldcards?
Sure. I've already posted it for you. Read the FAQs in this thread.
Click to expand...
Click to collapse
OR to create a gold card in Linux(without using the phone): http://www.nazriawang.com/2010/04/how-to-create-goldcard-with-ubuntu.html
This everything you need.
Thnx mate, really helped

[Q] Restoring to stock ROM on old version of Cyanogen

Firstly I apologise for such a noob question, but I'm not an expert with HTC's as I usually deal with iPhones.
Anyway, I have a HTC Desire Bravo with the following specs:
Android version: 2.2
Baseband version: 32.44.00.32U_5.09.05.30_2
Kernel Version: 2.6.34.5-cyanogenmod
Mod version: CyanogenMod-6.0.2-Desire
Build number: FRF91
It's an Orange UK branded phone, and I'm trying to put it back to a stock ROM. I've identified that RUU_Bravo_Froyo_HTC_WWE_2.10.405.2_R_Radio_32.44.00.32U_5.09.05.30_2_release_142828_signed.exe is the stock ROM I need to install, but how the heck do I do it?
I'm sorry it's such a noob question, but I've sold the phone and need to unlock it and put it back to the factory state.
You can't restore any ROMs, you must flash a new one.
Official untouched HTC Desire RUU ROM update (version 2.2). Not rooted, and contain radio and hboot rom update.
http://forum.xda-developers.com/showthread.php?t=869048
There's also other ROMs (Orange, T-mobile etc...): http://forum.xda-developers.com/showthread.php?t=695667.
Just run it on Windows.
Thanks for the advice sigorand.
sigorand said:
Just run it on Windows.
Click to expand...
Click to collapse
Sorry to sound dumb, but how exactly do I do this? Please explain like you would to a child
ensignia said:
Thanks for the advice sigorand.
Sorry to sound dumb, but how exactly do I do this? Please explain like you would to a child
Click to expand...
Click to collapse
After downloading the file, run it as you would run a setup for a program. Now you just have to follow the instructions on the screen.
I tried to run the .exe file and encountered Error 131 which is basically saying the version I'm trying to update to is not compatible with my device.
I've read something about gold cards being needed for branded devices, and as mine is an Orange UK, is this something I need to do?
Again sorry for the noob questions, I'm completely out of my depth here
Error 131 is the customer id error. This means, your phone was branded. Now you have to options:
- create goldcard (it avoids cid error), put this in your desire and flash newest ruu again
- flash the ruu from your provider (which was your provider?)

Categories

Resources