Related
Howdy,
I've just upgraded to the O2 Orbit phone, and am trying to get the GPS working, however, I can't seem to. In settings, all I can see is external gps, but this phone should have an inernal one (it even has the antenna in the back).
For the life of me, i can't seem to find out how to get the GPS working... anyone could help?
a.
Hi Adam.
Which GPS software are you using on your device?
At the moment, none, as before I bite the bullet and buy one, I wanted to see how good the GPS receiver was... so I tried the TomTom GPS driver, that includes a testing thing that shows locks on sats, and so far, after about 10 minutes, still nothing...
Having said that, I tried Google Maps, and that can't get a GPS lock either.
Try making sure the settings are setup for the default configuration before using GOOGLE MAPS.
Start>Settings>External GPS>GPS PROGRAM PORT = COM4
Then try google maps using try MENU>Track Location and see if the GPS starts working flashing AMBER LED and you should get a text message at the top of the screen saying initializing GPS and searching for sats.
Good luck, I found this Artemis to work beautifully with TOMTOM6 and a 2GB mSD card.
I've added a program called GPS Viewer, this gives you GPS gives some handy GPS details.
As for the GPS settings:
Programs
GPS program port:COM4
Hardware
GPS hardware portNone)
Baud rate:115200
Access
I have 'Manage GPS automatically' ticked.
My deveice always seems to want a vertically sight of the sky to locate the satellites but once connected i can take it indoors no problems.
Interestlingly, when I make the change to Baud Rate in hardware, and click ok... if I go back, it has reset itself to 4800?
A.
quickGPS
in my HTC3300, I've found QUICKGPS ? I've tried to run it, but after a few minutes it send a message so it cannot make the connection
Anyone can help me
thx a lot
michael
quick GPS is just to speed up the process the phone neesd to locate the sattelites.
well but if i were you i would check the baudrate. the default setting is at 4800
thank you very much really nice tip i spend about 3 hours try to get it working but now done it in 1 minuts and working but keep saying no valid signals whats that mean???
bex said:
Try making sure the settings are setup for the default configuration before using GOOGLE MAPS.
Start>Settings>External GPS>GPS PROGRAM PORT = COM4
Then try google maps using try MENU>Track Location and see if the GPS starts working flashing AMBER LED and you should get a text message at the top of the screen saying initializing GPS and searching for sats.
Good luck, I found this Artemis to work beautifully with TOMTOM6 and a 2GB mSD card.
Click to expand...
Click to collapse
First I want to say a huge thanks to 'Avalon-99' and 'deedee' for testing my previous builds
Its Here!!
Well after some awesome testing over the past few days. Its came to the time to release the first actual release of FBLoc!!
What is FBLoc?
FBLoc is a small app that allows you to update your Facebook status with your current location, Either by CellID or more accurate GPS!
CellID: Gets your status based on the Cell Tower you are currently connected to, then querying its location and some info from your phone reverse-geolocate the co-ordinates returned by the program to an approximate address...
GPS: The same as CellID but instead of using the co-ordinates from a Cell Tower it uses the GPS co-ordinates and then returns the address at that location...
Download it now!!
Thanks,
-David
Copyright © 2011 David Bell / DavidTiger All Rights Reserved.
All Source Code, Compiled exe and DLL files are the copyrighted works of David Bell/DavidTiger.
You may use/redistribute any included samples or files, leaving credits where due.
You also may NOT attempt to dissasemble or reverse engineer any compiled distributables (exe/dll).
You will need to manually authorize my facebook app with your facebook account (to allow status updates from the mobile app)
1) Login to Facebook.
2) Click this link - CLICK ME!
3) Allow the facebook app
4) Click where it says "Click Here to get your access_token!"
5) Copy the access token without "access_token="
6) Create a text file called "key" should be of type .txt
6.1) in the txt file place your access token you copied
7) Copy the txt file into the FBLoc folder in program files on your phone
8) Run the app
9) Enjoy
10) Report any errors that you face!
Cheers, Dave
Sort of works for me.
Location is technically close enough, see screen cap, "A" is the found location, red circle actual. Program says "County Londonderry, BT52 2HU" which is wrong.
Not a biggie for postcode but location should be Coleraine.
I think it depends on how close the Cell Towers are to you at the time. And how accurate the database I'm currently querying is...
I'm adding some debug options, so when I'm out next week to my familys 100 miles away I can test its accuracy along the way
For me on the map its about the still some distance from my actual location..but I'm still getting the correct town and start of postcode (KA18 1)
(see my attached image)
EDIT: I have noticed (for me) that removing some points after the decimal on the co-ordinates gets it a lot more accurate!
See the 1st attached image for these coords: 55.4550,-4.2679
But then look at the 2nd image for these coords: 55.45,-4.26
Using only 2 places after the decimal brings my location to just a few hundred metres from my precise location
3rd Image: Shows latest build, showing approx street name and county, Which for only using CellID and no GPS what so ever then I think its pretty accurate...
I have attached to this post the latest build for anyone who can test it with the new coords settings, see how accurate it is for them!
Thanks, Dave
Hi, I tested it in Germany on my HD2.
I could find my Location. I'm living on the country and it found a Location 5 km from me.
I Click on Update Status and got the message Status Updated.
But on Facebook, nothing happend.
Location much better, now gives town correctly.
For some weird reason, and I am assuming its pure CellID swithcing if I move the phone 2" across the room, the address returned changes from no 2 to no 77.
Not updating my FB though.
Yea same for me, I'm sitting 3ft from a window and if the phone is on my left (close to the window) its one location.. if its on my right then it changes location by a few hundred metres...
@avalon: I'm not sure how good this may be outside the UK/Ireland...
For the facebook problem:
See my attached images of the steps I take to get the access_token
1) Allow the facebook app to access your data etc..
2) Click to continue to ur token
3) Your token
4) Then (for now) you have to manually create a text file called settings with your access code in there..
(ahh wait, just noticed!)
You only copy the actual code, leaving out "access_token="
so for me my code starts with "1943" because "access_token=1943"
Hope that fixes the facebook updating problem
I deleted access_token= and now it works fine
It works in Germany, but I live on the country and the cells are very large.
So it couldn't be very exact.
Sent using RapidRead!
Quick update & Test build!
Now includes GPS for those who want a more accurate location!
Let me know what you all think of the current progress...
Any ideas/suggestions post them up and I'll be happy to implement them..
Still to come:
Internal Authorization for Facebook (75% Done)
Ideas/Suggestions:
(Show location on google maps, via internal browser)
Cheers, Dave
Use CellID works good.
On Use GPS, I got after a while the message "An Error Has Occured".
I don't know, which error, maybe I have no GPS Fix?
Could you inlarge the buttons "Use GPS" and "Use CellID"
Hey, I have resized the buttons
Change Log (FBLoc4.rar):
Added Satellite info - see how many satellites are in view and how many are locked-on
Changed all error messages to slightly more meaningful errors, So you know what part is having an error.
Preview Images:
003: Shows my Cell ID Location.
004: Shows my GPS Location.
If you show both results on google maps, it shows you CellID can be pretty accurate
Click for >> Google Map Showing Both Points
Red = CellID
Blue = GPS
Let me know how this one works for you
-Dave
I have Satellite Count 7/8
LAT=50,27039801
I couldn't see LON, it's to wide.
Error message: " Error Getting GPS Location"
With CELLID, I found my Location.
Okay thanks, I know where the error is coming from. Just hard to say why its doing it.
You are getting a gps fix so its not a coordinate problem :/
I'll add add a few debug messages to find the exact line/position it errors.
Try this version...
I added some messagebox's so I can pinpoint where the error occurs... As its working for me I can't replicate the problem...
(Just a thought.. Are you connected to the internet, WiFi or 3G,GPRS etc??)
You need the internet connected to be able to convert the coordinates into a location
If your are connected then the error comes from somewhere else...
Hi,
i have an internet connection.
Here are my last messages:
- Waiting for Response
- Got Reponse
- Splitting Location Array
- Putting Array into variables
- Error Getting GPS Location
Doing some UK travelling later this week, I will try and run screen caps to check the CellID and GPS locations, see how close they are.
Ahh thanks, I now know where the error is coming from.. Now I just need to fix it
Try this ver, added more messages around the area where the error occurs.
Working messages should be:
"DEBUG: Var 1"
"DEBUG: Var 2"
"DEBUG: Var 3"
then 3 msgbox with the 3 location variables
And if all goes well then should say: "DEBUG: Return Found Location"
-----
Thanks, deedee
I'll be doing the same this weekend on a trip to my family.. a good 100 miles or so, and then a few trips to town aswell.. which is another 10-20 miles.
I'll have a good idea of accuracy hopefully by then end of it. Just now at my house the difference between GPS and CellID is about 410 ft apart
Hi,
the messages:
-DEBUG: Var 1
-DEBUG: Var 2
-DEBUG: Var 3
-DEBUG: 0
-DEBUG: 0
-Error Getting GPS Location
-DEBUG: finish
Okay, The problem lies in the splitting of the list it receives after getting the location..
WAIT lol.. I just remembered from previous apps I've made and then confirmed it..
Because your coordinates the separator is , instead of the expected decimal .
Which then is causing the error
Simple fix: Just check if the coords have , then replace it with . then it should be fixed!
EDIT: Test the attached build, please
Yes, you find it, my separator is ","
You are to fast, will test it
It works quick and fine.
Now I got "Error Update Status" on Facebook, if I tap on "Update Status"
I updated to EnergyROM about a week ago, and my GPS only works in Google Maps. The GPS Test and other utilities do not see satellites.
1. I have run HTC GPS Test tool, and the $GPGSV info shows 16 satellites in view (I believe this comes from aGPS), but the 3 coordinate pieces of data are ,,, - meaning no data coming in. GPSTest also shows no satellites.
2. $GPGSA in HTC GPS Test second argument is 1, "fix not available"
3. I am on the latest EnergyROM. I have tried 2 radios, my original one that was in the stock ROM (4.48.25.20), and 4.49.25.95. I have tried with and without aGPS. I have tried some of the tweaks of the Intermediate driver settings:
A. With Advanced config: Start/Tools/Adv Config/GPS:
disable GPS logging
logfile name must be empty
old logfile name must be empty
maximum size of logfile must be 0
(soft reset, then...) delete the files :
\windows\GPSLogFile.txt and \windows\GPSLogFileBack.txt
B. Then edit registry
Under: HKLM\SYSTEM\CurrentControlSet\GPS Intermediate Driver\
Drivers\GpsOneDevice\PollInterval -> 100 (default is 1000)
Drivers\InputBufferSize -> 1024 (default is 4096)
Drivers\OutputBufferSize -> 1024 (default is 4096)
Drivers\SleepOnNoData -> 100 (default is 1000)
Multiplexer\MaxBufferSize -> 512 (by default not present, you have to create it as a New Value)
4. I have 2 AT&T HTC Tilt 2 phones, both configured identically (I move SIM card between them). Both are on the same ROM and Radio, and both act exactly the same - no GPS signals. So I don't think the GPS has failed, as it's two different phones.
5. External GPS set to COM4 (which appears correct based on the HTC tool seeing NMEA info on that port), hardware is set to No Port, 4800 baud. I also have it set to let Windows manage the GPS.
6. I have tried two versions of the Energy ROM, doing a Task29 in between; Feb 12 and Feb 27. No difference.
7. I run Bing, and it never gets a location. I do see my location in Weather though. Today Google only senses location to within 3500 meters; earlier this week it was 100 meters.
I am trying to be exhaustive and deliberate in finding the problem, but I have run out of ideas. Something must have changed, as I used this GPS all the time with Bing for voice navigation, and it was 100% reliable. Can anyone help with what could be the problem?
Thanks for your help!
One additional piece of info, I just did a hard reset of one of the two Tilt 2's, tested without agps, no lock on satellites. I then turned on agps, downloaded data, tried again, still no lock. I am outside on a gorgeous day with hardly a cloud in the sky too.
Thanks for your help - I am just out of ideas...
Is it possible there is some program in the cooked ROM conflicting with the GPS? Anyone with an idea?
Try it with the stock ROMs and see if it works there. If it doesn't then it might be hardware related.
HTCTilt2ATTOriginalShipROM.exe
RUU_Rhodium_S2_ATT_US_2.10.502.4_Radio_Rhodium_4.49.25.95_Signed_Ship.exe
If you have the program "QuickGPS", check if your satellite list expired. If it did, update and try your GPS program again.
com4 for software, none for hardware, BAUDRATE 57600. this works for me. and for some reason this gets set back to 4800 sometimes and that does not work.
tpc tp2, tmobile stock, sense turned off, wm 6.1
well, not so sure about my previous response. might have been a coincidence. i go back to external gps and cannot get it to stay at 57600.
i did download htc gps tools and found that if i had it in airplane mode it took seconds to find the satellite. if i had data communications enabled it took about 1.5 minutes. this was consistent.
Hello Guys,
I have a really annoying problem.
When I'm at home Google continuous switch between my real position (Home) and another place in Italy (Pesaro) (I''ve never been to Pesaro).
I have at home My Nest thermostat and Philips HUE and at least 10 times during the evening the light will be switched off because it sense that I'm not at home (Wrongly).
I have tried with High accuracy, low Accuracy and "Only position".
With only position use the GPS and It works but inside buildings is not working.
With High Accuracy is working, but when the phone goes to sleep when in standby, the map will goes wrongly to Pesaro.
With low battery the problem is really presente and it stay very often to the wrong position.
In google History there is no sign of Pesaro (For google Location History i've never been there).
The problem is only present in my home and near the home.
With wifi off and 3g on the problem is more present.
How can I solve that? Any advice?
I tried GPS Fix but is not working.
Simone
It looks like Google Maps has got a wrong default location and this looks to be an issue that has arisen from 2013 when Google stopped users changing their default location. The only test I can think of is to download offline maps for an area round your home and the area around Pesaro and then with "phone", wifi and gps switched off open Maps and see which map opens - It may not work since the phone may well hold its last recorded location for faster location fixing..
From your post I'm assuming that you've checked your home and work locations and roamed around all the location related bits of your Google account ( https://accounts.google.com/ServiceLogin )
peterk-1 said:
It looks like Google Maps has got a wrong default location and this looks to be an issue that has arisen from 2013 when Google stopped users changing their default location. The only test I can think of is to download offline maps for an area round your home and the area around Pesaro and then with "phone", wifi and gps switched off open Maps and see which map opens - It may not work since the phone may well hold its last recorded location for faster location fixing..
From your post I'm assuming that you've checked your home and work locations and roamed around all the location related bits of your Google account ( https://accounts.google.com/ServiceLogin )
Click to expand...
Click to collapse
The account is all secure.
I have already downloaded the Offline Home maps from google.
Never tried do download also the Pesaro one.
I try checking about default location.
See this thread (started 12 aug 2015 and still active today!) https://productforums.google.com/forum/#!topic/maps/NfH94fJ6KUU;context-place=forum/maps. The issue appears to be that Google's wifi location database records the MAC address of your router as being in Pesaro. An accurate GPS position overrides the wifi location but "sleeping" causes the wifi location to be restored. Claimed fix method in earlier posts but summarized in this post https://productforums.google.com/d/msg/maps/NfH94fJ6KUU/JtidQZ_WCAAJ
My installed apps that use gps are now failing: they are always "waiting for GPS". I installed the app "GPS test" with the same result: there are 23 satellites "in view" but zero in use. I have the strong feeling that I'm the culprit messing something around.
Any hint/suggestion about how to proceed to find the cause of the GPS failure ?
try to cut internet (wifi and data) and reboot. After that, launch GPS TEST and see if you still have 20 satellites in view.
I'd got the same problem and when i did that i was 0 satellities in view.
For me it was after change motherboard, so i deduced it's a hardware problem. Hope it's not the same for you
I did the test you suggested and I'm happy...but not so much: GPS TEST continued to show me the nearly 20 satellites, it shouldn't be an hardware problem but I don't find the software solution.