[Q] Unrooted now stuck at 2.1 - Droid Incredible Q&A, Help & Troubleshooting

I had rooted my 2.2 incredible with Unrevoked. To deal with the update nag I unrooted. This has taken me back to 2.1.
All my apps are gone (no biggie, I can restore those).
The phone doesn't believe that updates are available. How to I get back to 2.2 (or on to 2.3)? Once I'm there assume that I can re-root.

search the forums for the RUU...it will get you back to 2.2 and give you any updates you dont have
here is the link http://forum.xda-developers.com/showthread.php?t=829783&highlight=RUU

If you have s-off download this.
http://www.mediafire.com/?h6j97j2w2d55y8b
And flash in h-boot.
Sent from my ADR6300 using Tapatalk

Thanks for that advice.
I downloaded RUU and as per the instructions connected the DINC to an XP (SP3) machine.
RUU reports that it cannot find/connect with the phone. When I do connect the phone XP asks to install drivers. My guess is that I should. Which ones? (that I probably don't have). The phone does show up as a drive so XP knows it is there.
As per related instructions I tried installing VZAccess Manager. That doesn't find the DINC either. (I tried VZ-AM on both XP and Win7, with equally disappointing results).

Go to Google and find pdanet. Install that and it will ask to install drivers for your phone. That's the easy way. If you need more detailed I'm sure I can help.
Sent from my ADR6300 using Tapatalk

I think that I might have S-off
But I might have other stuff left over from the rooting process.
Doing the "Vol Down / Power" thing I see:
Incredible XC Ship S-off
hboot00.77.0000
microp 0417
Touch panel ATMEL224_16ab
Radio-1.00.03.04.06
Mar 23 2010
HBOOT (in blue)
<Vol up> to previous
<Vol down> to next item
<power> to select item
FASTBOOT (also highlighted in blue)
RECOVERY
CLEAR STORAGE
SIMLOCK

Alright you do have s-off. Download that file and rename it to pb31img and put on root of SD card(on sdcard but not in any files) and boot back into h-boot and when it unpacks it will want to install. Say yes and let it install. If your phone shuts off do not touch it. Wait until it asks to reboot device then say yes. Tell me how it goes. Also, it resets your device to 2.2 Froyo. You lose all your apps so back up stuff you want.
Goodluck! Then afterward ill help you reroot. You don't need unrevoked.
Sent from my ADR6300 using Tapatalk

Also I forgot. Pb31img has to be all capitals. It is case sensitive!
Very sorry for leaving that out.
Sent from my ADR6300 using Tapatalk

Very odd.
When I browse the DINC in Windows I see about 9 directories -- none of which I see on the device itself (using Astro). And the SDcard isn't one of those directories.
what have I done to this phone?
Again, thanks for the help. I'll try again tomorrow.

you should have 2 pop up auto start windows. one is your droid inc and the other is your sdcard. the one with htc sync in it is your droid. put the file in the other one. and the 9 directories in not sure about. what are they named. then i could probably help

and nothing is really wrong with your phone. its just at version 2.1 instead of 2.2 and your technically not unrooted. you have s-off which in my opinion is officially rooted because you can now do practically anything to your phone. and for the update to go away you can just hit install and the phone doesn't ask anymore. at least it didn't for me.

Even a blind squirrel occassionally finds an acorn!
I simply inserted the SD card into my PC (with adapter) and copied the RUU to the SD.
VOILA. I am now in 2.2
That ol' OTA update annoyance is back and gets stuck at "Rebooting Now" (I left it alone for 30 mins before powering down) but the hard part should be behind me.
Many many thanks.

No problem. If you want to reroot I can help you but I doubt you wanna go there Haha. Very glad you got it working!
Sent from my ADR6300 using Tapatalk

patalo said:
No problem. If you want to reroot I can help you but I doubt you wanna go there Haha. Very glad you got it working!
Sent from my ADR6300 using Tapatalk
Click to expand...
Click to collapse
Oh I'll root again (I'm just crazy enough).
But I might wait until Gingerbread launches and root from there. I suspect that GB will require unroot/re-root or something like that anyway.

I noticed your HBOOT was at .77, you can upgrade that too to .92 if you want. For certain ROM's (like Virtuous), you need HBOOT up to date (v .92). Just a suggestion.

The h-boot was included in the file I had him flash.!
Sent from my ADR6300 using Tapatalk

maplewood said:
Even a blind squirrel occassionally finds an acorn!
I simply inserted the SD card into my PC (with adapter) and copied the RUU to the SD.
VOILA. I am now in 2.2
That ol' OTA update annoyance is back and gets stuck at "Rebooting Now" (I left it alone for 30 mins before powering down) but the hard part should be behind me.
Many many thanks.
Click to expand...
Click to collapse
If you are still getting the update nag, that means you are on build# 3.21. No beuno.
http://dougpiston.com/files/RUU/bui...and-2.15.00.07.28-hboot-0.92.0000_PB31IMG.zip
^^ 3.26 and do it all over again. That will stop the nag and freezing.

Related

How to Unroot/go back to STOCK after installing Rooted versions of 1.47/2.05

Pretty sure most people know how to do this but for some who are having issues with drivers n such this might help, wouldn't hurt imo.. I'm on Windows 7 Ultimate (x86)
*** Reportedly Will not work with Official OTA 1.47/2.05 Updates, only Rooted updates, I have not personally tried. The Wizards @ the dev forums are working on a fix: http://forum.xda-developers.com/showthread.php?t=714157 ***
The steps below worked for me. I had the latest clockwork recovery,Damage Control DC 3.2.2.1 deodexed and The latest rooted ota updates installed (EVO_1.47.651.1_De-odex'd_Rooted.zip, 2.05.00.06.10 update.zip)
Download and install HTC Sync Update http://www.htc.com/us/support/evo-sprint/downloads/ (if you already have it installed then click the repair option,
or better yet uninstall your current one even if it is the same one, reboot your computer and then install this one again, for good measure.)
1. I unplugged/plugged my phone into the computer a couple times,switched to htc sync mode when it asks what type of usb connection I wanted, to install more driver updates if any
and did 2 reboots on my computer to get all the drivers updated/installed and working as they should.
2. Turn off the phone, hold volume down and hold down power button to get to bootloader,
pressed Power button one more time to get to the menu where you can reboot bootloader,
rebooted bootloader once and twice BEFORE the unrooting process for good measure.
3. Download either one of the RUU Stock Roms, I would try RUU_Supersonic_1.32.651.1_Radio_1.39.00.04.26_release_171253.exe and then RUU_Supersonic_1.47.651.1_Radio_2.05.00.06.10_release_CL195459.exe if the first one fails.
http://shipped-roms.com/shipped/Supersonic/
Alternate Link http://tinyurl.com/2fq4dzk
4. Plug your phone into your computer, make sure ALL Drivers installed properly if any, you may already have drivers installed, but double check, switch to HTC Sync mode
and let it install any drivers, then turn off your phone and start it in bootloader (Hold Volume Down +Power button) Reboot your computer also
to make sure everything has been properly installed.
5. Then you can finally double click (right click run as admin imo) the RUU.exe and start the unrooting process, good luck!
I try it and it don't work. I mean yet it detect my ota version but after I click update than for a while it said that my phone is not plug from the computer. I'm running windows 7 ultimate 64bit, eva x58 core i7-920
Thanks for the write-up, does this take the phone completely back to out-of-the-box stock?
yang704 said:
I try it and it don't work. I mean yet it detect my ota version but after I click update than for a while it said that my phone is not plug from the computer. I'm running windows 7 ultimate 64bit, eva x58 core i7-920
Click to expand...
Click to collapse
Make sure your in HTC Sync mode or Disk Drive Mode on your phone, also try rebooting your computer & phone, plugging your phone into a different usb port, etc, have to tinker with it a bit.
jasongthang said:
Thanks for the write-up, does this take the phone completely back to out-of-the-box stock?
Click to expand...
Click to collapse
Yes.
Worked for me earlier today. Failed the first time, but i just ran it again and it went through. Thanks for the writeup!
Np glad I could help
Sirchuk said:
Worked for me earlier today. Failed the first time, but i just ran it again and it went through. Thanks for the writeup!
Click to expand...
Click to collapse
Sent from my PC36100 using XDA App
do you have to have either 1.47 or 2.05 to use this method, or will the rooted supersonic 1.32.651.1 be able to do it?
because I installed htc sync, set the phone to HTC Sync, but the phone says it cant find it on my computer.
jasongthang said:
do you have to have either 1.47 or 2.05 to use this method, or will the rooted supersonic 1.32.651.1 be able to do it?
because I installed htc sync, set the phone to HTC Sync, but the phone says it cant find it on my computer.
Click to expand...
Click to collapse
Yes it will work for that version, you only set HTC Sync mode up to install any missing drivers, then you switch back to disk drive mode if you want your computer to gain access to your phones SD card.
Tundricles said:
Yes it will work for that version, you only set HTC Sync mode up to install any missing drivers, then you switch back to disk drive mode if you want your computer to gain access to your phones SD card.
Click to expand...
Click to collapse
so are you saying the htc sync doesnt have to actually sync? the phone never finds the htc sync on the computer. But I can get the computer to see the phone and access the sd card no problem.
Thanks for the write-up it worked just like planned. And with so many people returning for some reason or another this is just what we need
Im returning one and buying another at bestbuy HEHE
so will this return the Evo to shipped stock rom IF i did the OTA update? and will i be able to root if i have the OTA update?
thanks
I had the .6 stock(not root)and OTA updated to 1.47,how can I go back to .6 stock,I ran the .6 RUU,but it said main version older and refused to downgrade,anyone knows how do I reload the .6 back?my EVO ever rooted.
As far as I've been able to find by SEARCHING the forums:
NO
Once you do the OTA update you can NOT go back or downgrade or uninstall it or whatever.
This method posted is for installing a ROOTED ota update. ie, it was hacked, and rooted prior to being installed. If you downloaded it from sprint on your phone and installed it, your are SOL for now.
Sirchuk said:
As far as I've been able to find by SEARCHING the forums:
NO
Once you do the OTA update you can NOT go back or downgrade or uninstall it or whatever.
This method posted is for installing a ROOTED ota update. ie, it was hacked, and rooted prior to being installed. If you downloaded it from sprint on your phone and installed it, your are SOL for now.
Click to expand...
Click to collapse
That sucks...oh well,thanks for the info.
They're working on a fix, but I wouldn't hold your breath. Most of the devs are taking the weekend off for one reason or another.
Here's the discussion thread:
http://forum.xda-developers.com/showthread.php?t=714157
jasongthang said:
so are you saying the htc sync doesnt have to actually sync? the phone never finds the htc sync on the computer. But I can get the computer to see the phone and access the sd card no problem.
Click to expand...
Click to collapse
Yes, sync be damned!
Thanks for the write up.
Couldnt get it to go. Tried EVERYthing mentioned. Keep running into Error 170 USB connection error. I did dl HTC sync and let all the drivers install and rebooted my PC. And the phone.
Also tried multiple USB ports.
Nada.
not sure if this is any help, but I think the person in this thread had that same error, I hate to have you dig through the thread but I want to say it was mentioned on one of the later pages. Not sure if this is applicable to what you are doing.
http://forum.xda-developers.com/showthread.php?t=723236
elegantai said:
not sure if this is any help, but I think the person in this thread had that same error, I hate to have you dig through the thread but I want to say it was mentioned on one of the later pages. Not sure if this is applicable to what you are doing.
http://forum.xda-developers.com/showthread.php?t=723236
Click to expand...
Click to collapse
Thanks but sadly I've been through all the steps mentioned in all those links.
My USB is fine as I have been using it without issue.
I definitely cannot flash the .1 or .6 RUU.
I tried liquid jesus's method and it would not go either.
I'm stumped
Have u tried to flash the ruu as a zip?

[Q] RUU will NOT install, help?

I know I've seen a post simular to this but it's buried and what little was there did not help.
I have a Win 7 Home Premium 64-bit system, and tried installing the RUU that leaked Thursday. I installed the latest HTC Sync prior to running the RUU.
Made it as far as the screen on the phone going all black with chrome looking HTC logo, at which point the PC wanted to reboot and I got the error [170]. Per the instructions on the other post, I rebooted the PC and pulled the battery on the DInc.
Afterward, no amount of plugging, unplugging, running the RUU again, booting into hboot, booting into recovery, etc. would ever even get me back tot he black HTC screen. I just keep hitting the error [170] after the "verifying contents" file.
I managed to just power down the phone and turn it back on, despite seeing that scary looking screen with the Dinc under a big red ! icon, and it boots up like nothing ever happened.. all apps and contacts there.. etc.
Can someone PLEASE help me get this stinking RUU to install properly? Or failing that.. is there a way to put the contents into the internal memory of my phone and trick it into thinking it's recieved the OTA and I declined, so that I can install from the settings menu? Is it possible to even do that? If one of us gets the OTA, can we jack the OTA out of our internal storage and post it here to allow that to be done?
TIA..
NinjaRicky, UberNoob Extrordinaire
This sounds like the same stage I am at, but I am terrified to remove the battery for bricking my phone.
Right now I have the chrome htc screen when plugged in and the hboot ruu screen (mostly white with green text) when not.
My hboot ver is .79 and radio is 1.00.03.04.06. I also have the S-OFF.
What is the best way to return to the stock rom?
If you have S-Off, I'm guessing you have rooted your phone a little. I don't think security off is a default the RUU would have done.
I have zero experience with rooting, so I have no idea how to return you to stock. Honestly, unless you changed your radio version.. which it looks like you didn't.. you probably could run Unrevoked and Forever, then use one of the guides here to flash your ROM with the stock kernal. I'm sure I've seen a zip file of it floating around in the guides.
Hope that helps. I'm just going off what I've read. I think my problem is strictly because of the 64 bit Windows, but I'm hoping for a workaround.
Is your sdcard formatted to fat32
Sent from my ADR6300 using XDA App
jdkoreclipse said:
Is your sdcard formatted to fat32
Sent from my ADR6300 using XDA App
Click to expand...
Click to collapse
Not sure if you meant me or Rutledge, but no.. my card is FAT.. not FAT32. I'm about to reformat it now. How does that effect the RUU?
The hboot can only correctly read filed from q fat32 card
Sent from my ADR6300 using XDA App
I know I'm going to come off thick witted and slow for this.. but my question is about running the RUU from Windows 64-bit and getting an error [170] indicating that the computer thinks the USB cable isn't connected. I'm not trying to root my phone or install anything from the SD Card.. I wouldn't know what to do with hboot anyway.. I just put the phone in hboot mode and tried running the RUU again because I was grasping at straws.
What does the SD card have to do with the communication error I keep getting?
Use the extracted PB31IMG.zip from the ruu (tis can be found in the thread) and flash feom hboot....that is easier.,
Sent from my ADR6300 using XDA App
NinjaRicky said:
I know I'm going to come off thick witted and slow for this.. but my question is about running the RUU from Windows 64-bit and getting an error [170] indicating that the computer thinks the USB cable isn't connected. I'm not trying to root my phone or install anything from the SD Card.. I wouldn't know what to do with hboot anyway.. I just put the phone in hboot mode and tried running the RUU again because I was grasping at straws.
What does the SD card have to do with the communication error I keep getting?
Click to expand...
Click to collapse
I'm having the same error and found no way to fix it. I was forced to flash the update via my SD card. I had tried 3 computers with no luck ..
Really want to not root my phone yet.. I have a strong conviction I'd brick it. Just not confident yet.
NinjaRicky said:
Really want to not root my phone yet.. I have a strong conviction I'd brick it. Just not confident yet.
Click to expand...
Click to collapse
Just flashing the file from the RUU via your SD card does not require root since its signed by HTC. You do how ever must rename the file to PB31IMG.zip and make sure the card is formatted as FAT32
I did it with no issues but I wont recommend you to do it. I can recommend in this case just waiting the week or how ever long it takes for Verizon to push to the OTA to your phone then.
If you do want to see what I did just look for my question thread in this section called "[Q][RUU]extracting rom.zip file and flashing not rooted and s-on"
And this can be done with a stock DInc with factory defaults, such as S-On and all in place? No Unrevoked first?
Edit: Ignore the above. I R an idiot. Answered the question in your post. And ... it's updating right now witht he ROM.zip renamed. You are the man today, sir. I appreciate all the advice. boomertwo.. this bud's for you!
you need to have htc sync installed to run the RUU.
also your phone needs to be in HTC sync mode with usb debugging enabled.
i have 7x64.
k.electron said:
you need to have htc sync installed to run the RUU.
also your phone needs to be in HTC sync mode with usb debugging enabled.
i have 7x64.
Click to expand...
Click to collapse
That does work to get the phone into RUU mode but after that then the program lost connection to the phone completely. This was the wall I hit and found no way around it after trying it on 3 different machines. All running windows 7 but only 2 of them were 64 bit.
boomertwo said:
That does work to get the phone into RUU mode but after that then the program lost connection to the phone completely. This was the wall I hit and found no way around it after trying it on 3 different machines. All running windows 7 but only 2 of them were 64 bit.
Click to expand...
Click to collapse
I think someone mentioned that you could just let it do the usb error, the close the RUU and restart it and it should work from there.

Replacement EVO has the OTA...

compliments of the local repair center.
Needless to say, I'm not rooted. What's my options?
Unfortunately for you, you have to wait until a root method is available for the newest firmware. Or find someone with an evo that hasn't taken the ota update, and doesn't care about rooting and trade phones
Vinchenzop, I don't mean to steal someone's thread with this question but it looks like you answered his question with what might just be the answer to mine so I'll ask it here. I think (I know) I did something very stupid yesterday after I uploaded to 2.3.3 on my rooted phone. I did it from here, not the official update and when I was done I know I was still rooted because I restored everything with Titanium backup. Well, seems Titanium on the auto backup didn't back everything up every night like I set and some of the backups missed data or some programs just weren't there so I did a restore of my programs from My Backup Pro. Something in there must've unrooted me because now when I open Titanium it says, after the request for approval to use it pops up, Sorry, I could not acquire root privileges. This application will *not* work! Please verify that your ROM is rooted and includes BusyBox, and try again.
When I open Wireless tether it says it's been granted superuser permission but then says unable to start tethering, is your devise rooted?
Help please.
If you have s-off in bootloader you're still rooted. Try going to recovery and flashing this superuser fix/reboot and your permissions should work again.
http://db.tt/9D4X8hg
Sent from my PC36100
Just a quick reply, I'm on the road (pulled over) can't see my previous response but after that didn't work I went back into recovery and saw the option to reset permissions. You're a miracle worker. THANK YOU SO MUCH. I'm back to root.
RickMG said:
Just a quick reply, I'm on the road (pulled over) can't see my previous response but after that didn't work I went back into recovery and saw the option to reset permissions. You're a miracle worker. THANK YOU SO MUCH. I'm back to root.
Click to expand...
Click to collapse
Glad you got it fixed man!
Sent from my PC36100
Rick, check your pm
dirkyd3rk said:
If you have s-off in bootloader you're still rooted. Try going to recovery and flashing this superuser fix/reboot and your permissions should work again.
Sent from my PC36100
Click to expand...
Click to collapse
dirkyd3rk said:
Glad you got it fixed man!
Sent from my PC36100
Click to expand...
Click to collapse
dirkyd3rk, I just noticed my response and it was for anyone else having the problem that I had. I just wanted to say the response was meant to say that I downloaded the file you mentioned above which eventually is the reason I was able to get back my root. I just needed the one more step I listed above about going back into recovery after doing your instructions and that is when I saw the option to "Reset Permissions" which I never saw before your fix and that did the final trick. Thank you so much again.
p.s. I had to delete your link above because I do not have enough posts but all those who might need it can see it in your original response to me.
RickMG said:
dirkyd3rk, I just noticed my response and for anyone else having the problem I had I just want to say the response was meant to say that I downloaded the file you gave me which eventually is the reason I was able to get back my root. I just needed the one more step I listed above about going back into recovery after your instructions and then I saw the option to "Reset Permissions" which I never saw before your fix and that did the final trick. Thank you so much again.
p.s. I had to delete your link above because I do not have enough posts but all those who might need it can see it in your original response to me.
Click to expand...
Click to collapse
No problem man either way you're back in business that's all that matters lol.
Ok, posting in this thread bc its the closest subject to what i have going on.
I got my evo replaced last night for antenna issues. Old one had Fresh on it, and i want it back.
I am using the same memory card as was in my old evo
current phone has 2.2 build 3.70.651.1
this thread says there isnt a way to root with latest OTA. But the read first thread under Q&A says that my build is supported.
So i followed the instructions under xHausx guide and im getting stuck.
When i run my autoroot.bat file as administrator it opens up dos prompt and says
'res\ini.cmd' is not recognized as internal or external command, operable program or batch file.
ERROR Cannot load init file! Make sure you extract everything out of the zip!
I downloaded the autoroot 2.5 file through the mirror linked on the guide and extracted it. I have HTC sync 2.0.35. (i know there is a new version 3.0 available but as it just came out yesterday i am assuming that the version is not needed for this method)
Debugging is checked
Phone was in charging mode
Any thoughts?
Im trying not to get discouraged. This is what happens when you let someone else root it the first time and dont pay attention.
I think i posted almost all details that i could think of.
Randomsilliness said:
Ok, posting in this thread bc its the closest subject to what i have going on.
I got my evo replaced last night for antenna issues. Old one had Fresh on it, and i want it back.
I am using the same memory card as was in my old evo
current phone has 2.2 build 3.70.651.1
this thread says there isnt a way to root with latest OTA. But the read first thread under Q&A says that my build is supported.
So i followed the instructions under xHausx guide and im getting stuck.
When i run my autoroot.bat file as administrator it opens up dos prompt and says
'res\ini.cmd' is not recognized as internal or external command, operable program or batch file.
ERROR Cannot load init file! Make sure you extract everything out of the zip!
I downloaded the autoroot 2.5 file through the mirror linked on the guide and extracted it. I have HTC sync 2.0.35. (i know there is a new version 3.0 available but as it just came out yesterday i am assuming that the version is not needed for this method)
Debugging is checked
Phone was in charging mode
Any thoughts?
Im trying not to get discouraged. This is what happens when you let someone else root it the first time and dont pay attention.
I think i posted almost all details that i could think of.
Click to expand...
Click to collapse
Your phone luckily wasn't updated to the 2.3 OTA, so you can still root it. I have no experience with the Autoroot method, so unfortunately I cannot help you there. I can recommend using unrevoked instead to root your phone.
You'll need to uninstall HTC Sync, and download the modified drivers from the unrevoked site & install them. Download the latest version (I believe it's called reflashpackage.exe once it downloaded). Everything else you should already have covered - debugging on, charge only, etc. There are video walkthroughs of unrevoked on YouTube, if that helps you.
Once you've installed the drivers, plugged the phone in, and started unrevoked, it should only take about five minutes or so. The phone will reboot a couple of times, wait for it to say "done", then you're rooted. Unrevoked installs ClockworkMod, if you'd rather use Amon Ra you can get it from Rom Manager or from xda.
I'm sure that Autoroot is a great program, I just don't have experience with it. I've rooted with unrevoked once, and it was the easiest process I've seen for fully rooting/nand unlock.
Good luck!
...oh, and don't restore any nandroid backups from your old phone. User apps backed up with Titanium are fine, but nandroid backups are a baaaad idea.
(from... Evo/MIUI/Tapatalk)
Uninstall HTC sync would be my first thought...then start again with just the usb drivers.
Thanks, gonna try that method now. What better way to spend an evening right???
LOL
Ok.
Followed the instructions on Unrevoked.
Downloaded unrevoked 3.
installed drivers.
restarted phone,
opened unrevoked 3.
Program ran, then kicked off error “Error: failed to get root. Is your firmware too new?"
Looked up a few forums that says boot to bootloader and clear storage.
While doing this i noticed it says S-Off now.
Cleared storage, rebooted and ran unrevoked. It went through its little speal and rebooted the phone a few times.
now unrevoked says "done" However, i still have stock HTC Sense.
*slams head on laptop*
Ok, so i found a thread that suggested downloading root checker.
it says i have root access.
So if im thinking correctly i just need to install a rom that i like?
Randomsilliness said:
Ok.
Followed the instructions on Unrevoked.
Downloaded unrevoked 3.
installed drivers.
restarted phone,
opened unrevoked 3.
Program ran, then kicked off error “Error: failed to get root. Is your firmware too new?"
Looked up a few forums that says boot to bootloader and clear storage.
While doing this i noticed it says S-Off now.
Cleared storage, rebooted and ran unrevoked. It went through its little speal and rebooted the phone a few times.
now unrevoked says "done" However, i still have stock HTC Sense.
*slams head on laptop*
Click to expand...
Click to collapse
Ya...depending on what was imaged in the process, you will probably have a stock rom installed afterwards. I've done two EVO's (004) in the last day using this:
http://www.multiupload.com/HSWSV16NU0
when you are done..your will have a stock rooted sense.
But it sounds like you got through everything well, so no need to redo anything..happy flashing?
I still haven't got my replacement, apparently EVOs are backordered. I told the Sprint store to NOT update it to gingerbread. Told them I use Netflix too often and to leave it alone They said no problem.
Stuke00 said:
I still haven't got my replacement, apparently EVOs are backordered. I told the Sprint store to NOT update it to gingerbread. Told them I use Netflix too often and to leave it alone They said no problem.
Click to expand...
Click to collapse
I did notice when I picked the one up for my son yesterday at Best Buy, they were updated the two customers before me. Did the same thing...just took the box without him even opening it and did my own thing.
After 2 replacements in a week on mine..today the third one came in and had the same solar flare in the middle of the screen. The guy at the sprint store was now a little more sympathetic and went and got a new 004 out of the back and let me do the activation myself...whew..no update done on that one either!
Randomsilliness said:
now unrevoked says "done" However, i still have stock HTC Sense.
*slams head on laptop*
Click to expand...
Click to collapse
It's normal to have stock HTC Sense after you root (at least with unrevoked). Do you have Superuser in your app list?
bkrodgers said:
It's normal to have stock HTC Sense after you root (at least with unrevoked). Do you have Superuser in your app list?
Click to expand...
Click to collapse
Yes i did have it. I copied my rom zip file over and installed it ... so i think everything is good.
Fresh 3.5
Tho my antenna is now going in and out a lot (which it didnt before the root, thats why i got the old one replaced due to it going in and out)
and 3g is SUPER slow.
Any ideas?

[Q] Bricked Evo Help!!!

So my brother tried to update his Evo with the official update. For some reason his Evo is bricked. He went and decided to switch companies and get an iPhone and gave me his Evo.
When i turn it on its on an infinite reboot. Only thing i can get to is the bootloader menu (holding the power and up key or the other menu with the down key key). Im new to this and dont know if I should just tank it. Im pretty sure there is a way to make it come back to life so if someone can offer any help I would appreciate it.
Some technical notes.
1.) I installed the usb driver so my desktop recognizes it.
2.) I tried updating it in fastboot usb mode using the RUU Supersonic 1.32.651_Radio_1.39.00.04.26_release_171253.
It looked like it was working. It asked me if I wanted to update(better yet downgrade) from Image version 4.22.651.2 to Image version 1.32.651.1. It rebooted the device it said it was erasing the user data, then it said it was sending then updating signature........then it tanked and says ERROR[140]:BOOTLOADER VERSION ERROR The ROM Utility cannot update your Android phone. Please get the correct ROM Update Utility and try again.
I dont know how to root i dont know how to hack. I just want it to work. Please let me know how to get it fixed. Im tired of my blackberry.
3.)I tried to do the PC36IMG thing and I dont know what its supposed to do. But when it goes to read it I get a PC36DIAG.zip cannot be found or missing and a PC36Diag.n something missing.
Thanks
Do you have htc sync installed? It won't work unless you have the actual htc sync suite installed. Just google it won't cost you anything. I semi bricked my phone but I fixed it. Maybe some things I done in this thread could help you. Just skim through a few of my posts'.
http://forum.xda-developers.com/showthread.php?t=1100781
Sent from my PC36100 using Tapatalk
lokoalex said:
So my brother tried to update his Evo with the official update. For some reason his Evo is bricked. He went and decided to switch companies and get an iPhone and gave me his Evo.
When i turn it on its on an infinite reboot. Only thing i can get to is the bootloader menu (holding the power and up key or the other menu with the down key key). Im new to this and dont know if I should just tank it. Im pretty sure there is a way to make it come back to life so if someone can offer any help I would appreciate it.
Some technical notes.
1.) I installed the usb driver so my desktop recognizes it.
2.) I tried updating it in fastboot usb mode using the RUU Supersonic 1.32.651_Radio_1.39.00.04.26_release_171253.
It looked like it was working. It asked me if I wanted to update(better yet downgrade) from Image version 4.22.651.2 to Image version 1.32.651.1. It rebooted the device it said it was erasing the user data, then it said it was sending then updating signature........then it tanked and says ERROR[140]:BOOTLOADER VERSION ERROR The ROM Utility cannot update your Android phone. Please get the correct ROM Update Utility and try again.
I dont know how to root i dont know how to hack. I just want it to work. Please let me know how to get it fixed. Im tired of my blackberry.
3.)I tried to do the PC36IMG thing and I dont know what its supposed to do. But when it goes to read it I get a PC36DIAG.zip cannot be found or missing and a PC36Diag.n something missing.
Thanks
Click to expand...
Click to collapse
My last tip would be to put the phone in fastboot and then run the 3.29 ruu exe. It worked for me, here's the link. Just make sure you have htc sync installed and it's not running when u try to run the ruu (from fastboot in bootloader).
http://goo-inside.me/supersonic/sto...0.09.01_NV_1.77_CNV_release_150224_signed.exe
Sent from my PC36100 using Tapatalk
lokoalex said:
So my brother tried to update his Evo with the official update. For some reason his Evo is bricked. He went and decided to switch companies and get an iPhone and gave me his Evo.
When i turn it on its on an infinite reboot. Only thing i can get to is the bootloader menu (holding the power and up key or the other menu with the down key key). Im new to this and dont know if I should just tank it. Im pretty sure there is a way to make it come back to life so if someone can offer any help I would appreciate it.
Some technical notes.
1.) I installed the usb driver so my desktop recognizes it.
2.) I tried updating it in fastboot usb mode using the RUU Supersonic 1.32.651_Radio_1.39.00.04.26_release_171253.
It looked like it was working. It asked me if I wanted to update(better yet downgrade) from Image version 4.22.651.2 to Image version 1.32.651.1. It rebooted the device it said it was erasing the user data, then it said it was sending then updating signature........then it tanked and says ERROR[140]:BOOTLOADER VERSION ERROR The ROM Utility cannot update your Android phone. Please get the correct ROM Update Utility and try again.
I dont know how to root i dont know how to hack. I just want it to work. Please let me know how to get it fixed. Im tired of my blackberry.
3.)I tried to do the PC36IMG thing and I dont know what its supposed to do. But when it goes to read it I get a PC36DIAG.zip cannot be found or missing and a PC36Diag.n something missing.
Thanks
Click to expand...
Click to collapse
Was the phone rooted when he updated. In Hboot does it say s-off. If so try running the pc36img.zip of amon ra and see if you can get a recovery image back on the phone to work out of.
lokoalex said:
So my brother tried to update his Evo with the official update. For some reason his Evo is bricked. He went and decided to switch companies and get an iPhone and gave me his Evo.
When i turn it on its on an infinite reboot. Only thing i can get to is the bootloader menu (holding the power and up key or the other menu with the down key key). Im new to this and dont know if I should just tank it. Im pretty sure there is a way to make it come back to life so if someone can offer any help I would appreciate it.
Some technical notes.
1.) I installed the usb driver so my desktop recognizes it.
2.) I tried updating it in fastboot usb mode using the RUU Supersonic 1.32.651_Radio_1.39.00.04.26_release_171253.
It looked like it was working. It asked me if I wanted to update(better yet downgrade) from Image version 4.22.651.2 to Image version 1.32.651.1. It rebooted the device it said it was erasing the user data, then it said it was sending then updating signature........then it tanked and says ERROR[140]:BOOTLOADER VERSION ERROR The ROM Utility cannot update your Android phone. Please get the correct ROM Update Utility and try again.
I dont know how to root i dont know how to hack. I just want it to work. Please let me know how to get it fixed. Im tired of my blackberry.
3.)I tried to do the PC36IMG thing and I dont know what its supposed to do. But when it goes to read it I get a PC36DIAG.zip cannot be found or missing and a PC36Diag.n something missing.
Thanks
Click to expand...
Click to collapse
The RUU you used is pretty old, I would try a newer one, such as the 3.70 software. What version is your hboot, and is it S on or S off? Where is it bootlooping at? (the white HTC EVO 4G screen, or the actual boot animation?)
I selected the old one because that one never gives me issues, the 3.30 and 3.70 never work for me
Sent from my PC36100 using Tapatalk
k2buckley said:
The RUU you used is pretty old, I would try a newer one, such as the 3.70 software. What version is your hboot, and is it S on or S off? Where is it bootlooping at? (the white HTC EVO 4G screen, or the actual boot animation?)
Click to expand...
Click to collapse
My hboot is: HBOOT-2.16.0001
S-ON
Its bootlooping at the white HTC EVO4 screen.
Any ideas.
I have tried RUU:
3.26.651.6
3.29.651.5
3.29.651.6
3.29.651.5
3.70.651.1
The only one that actually does anything is 1.32.651.1 The rest just fail giving me an ERROR [170]: USB CONNECTION ERROR. Could be because HTC sync cant install the driver. How Can I get that driver installed. Could it be my OS?
lokoalex said:
My hboot is: HBOOT-2.16.0001
S-ON
Its bootlooping at the white HTC EVO4 screen.
Any ideas.
I have tried RUU:
3.26.651.6
3.29.651.5
3.29.651.6
3.29.651.5
3.70.651.1
The only one that actually does anything is 1.32.651.1 The rest just fail giving me an ERROR [170]: USB CONNECTION ERROR. Could be because HTC sync cant install the driver. How Can I get that driver installed. Could it be my OS?
Click to expand...
Click to collapse
I would try running the RUU as a PC36IMG, if you haven't already. Download PC36IMG of the RUU you wish to use, and put it on the main directory of your SD card. Then boot to the bootloader, and let it detect the PC36IMG. It should scan it, then ask you to update. Select volume up for yes, and let it run it's course. Perhaps that method will work out better for you.
Dirk, thats odd that you get errors on the new RUU's. Sometimes if the hboot and radios don't match up the RUU won't run.
EDIT: And yes, you definitely could be getting that error (most likely are) because HTC won't install the driver. You need to get that installed. I would still just try the PC36IMG though.
A1Lonestar said:
Was the phone rooted when he updated. In Hboot does it say s-off. If so try running the pc36img.zip of amon ra and see if you can get a recovery image back on the phone to work out of.
Click to expand...
Click to collapse
The phone was not rooted. I dont even know how to do that. LOL. I will try that pc36img file.
lokoalex said:
The phone was not rooted. I dont even know how to do that. LOL. I will try that pc36img file.
Click to expand...
Click to collapse
Just make sure that the file is named PC36IMG.zip (exactly that).
Sorry but I have to ask why your friend didn't bring it right to sprint and get them to fix it they would have replaced it in a second for a bad upgrade?
Sent from my PC36100 using XDA App
k2buckley said:
Just make sure that the file is named PC36IMG.zip (exactly that).
Click to expand...
Click to collapse
I ran it. It scanned it checked it and then nothing. Goes right back to the screen where it asks you to choose fastboot, recovery, ......
I did notice that my battery needs charging. Im gonna try again when the battery has some juice.
Also got HTC sync installed on my Windows & machine.Will give it a try too.
linsalata28 said:
Sorry but I have to ask why your friend didn't bring it right to sprint and get them to fix it they would have replaced it in a second for a bad upgrade?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
My brother is impulsive and he didnt like the fact that it bricked on him. If it was me I would have definitely taken it to sprint.
You could try this don't know if they will or not but I'm kind of cool with some guys at one of those little stands in a mall now they are sprint but not really they helped me with an old phone I was having problems with that wasn't activated they don't really care and they have the tools to fix things but the one I go to like to show me just how much they know about androids witch isn't much LOL.
Might be worth a shot you might find a guy thats into moding and would like to show off.
Sent from my PC36100 using XDA App
linsalata28 said:
You could try this don't know if they will or not but I'm kind of cool with some guys at one of those little stands in a mall now they are sprint but not really they helped me with an old phone I was having problems with that wasn't activated they don't really care and they have the tools to fix things but the one I go to like to show me just how much they know about androids witch isn't much LOL.
Might be worth a shot you might find a guy thats into moding and would like to show off.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Not a bad idea. Might have to find some of those guys.
k2buckley said:
I would try running the RUU as a PC36IMG, if you haven't already. Download PC36IMG of the RUU you wish to use, and put it on the main directory of your SD card. Then boot to the bootloader, and let it detect the PC36IMG. It should scan it, then ask you to update. Select volume up for yes, and let it run it's course. Perhaps that method will work out better for you.
Dirk, thats odd that you get errors on the new RUU's. Sometimes if the hboot and radios don't match up the RUU won't run.
EDIT: And yes, you definitely could be getting that error (most likely are) because HTC won't install the driver. You need to get that installed. I would still just try the PC36IMG though.
Click to expand...
Click to collapse
I've been trying man. Im getting nowhere with this. I tried the RUU 3.70 and it just crashed asked me if I wanted to debug. So im gonna try one of the older versions. At least its seeing these with the HTC sync working.
lokoalex said:
I ran it. It scanned it checked it and then nothing. Goes right back to the screen where it asks you to choose fastboot, recovery, ......
I did notice that my battery needs charging. Im gonna try again when the battery has some juice.
Also got HTC sync installed on my Windows & machine.Will give it a try too.
Click to expand...
Click to collapse
Yea, I would either try an RUU again now that you've got HTC Sync installed, or format your SD card, and put ONLY the PC36IMG on there, then try it again. The only time I've seen a PC36IMG file not ask you to update is if the card needed to be formatted for one reason or another.
k2buckley said:
Yea, I would either try an RUU again now that you've got HTC Sync installed, or format your SD card, and put ONLY the PC36IMG on there, then try it again. The only time I've seen a PC36IMG file not ask you to update is if the card needed to be formatted for one reason or another.
Click to expand...
Click to collapse
I tried the RUU again and it gotas far as the signature and then it crapped out again.
Error [140] BOOTLOADER VERSION ERROR.
Have no idea what the problem could be. Gonna try reformatting the card one more time and see what happens. So frustrating!!!
Maybe try to update or downgrade your hboot version.
Sent from my PC36100 using XDA App
*Assuming you're working on a windows machine*
Go to this site http://shipped-roms.com/index.php?category=android&model=Supersonic
and download ruu 3.70.
Without your phone connected, run the ruu until it gets to the first dialog box (it should have a checkbox that says "I understand the caution..." blah blah).
With this dialog still open, go to start > run and type "%TEMP%" without quotes.
Inside this folder look for a file called "rom" or "rom.zip" (you are going to have to go through all subfolders) depending on your windows settings (Hide extensions for known file types).
When you find it move it to your desktop and rename it to "PC36IMG" or "PC36IMG.zip" accordingly.
Get a card reader and take your sdcard out of your phone and place it in the card reader. Place the PC36IMG file you renamed on the root of the sdcard. Install your sdcard back into the phone and boot into bootloader. This should scan the card and find the PC36IMG and reinstall a bone stock non-rooted 2.2 rom.
If this method fails, it's possible the nand may have been corrupted in the update process. I'm better at troubleshooting if I have the device with me so this is the best I can do.
lokoalex said:
I tried the RUU again and it gotas far as the signature and then it crapped out again.
Error [140] BOOTLOADER VERSION ERROR.
Have no idea what the problem could be. Gonna try reformatting the card one more time and see what happens. So frustrating!!!
Click to expand...
Click to collapse
That is frustrating. It sounds like there may be a problem with your current boot.img, and maybe that's why it won't let the RUU re-write the boot.img when it's trying. That would also explain you not being able to boot, because if your bootloader is corrupted somehow, then you won't be able to get anywhere at all. Unfortunately, the bootloader you're on (HBOOT-2.16)isn't downgradeable. I'm starting to suspect that you're getting the bootloader version error because when you run the older RUU, it will try to flash an older version of hboot. Since the version you're on is NOT able to be downgraded, it's probably erroring out when it tries to downgrade, but it can't. I would suspect that if the RUU for the 4.22 software was available and you were able to run that one, then it would succeed. The problem is that you're trying to downgrade, and you can't do that. I'm not sure what went wrong when the OTA was accepted, but it seems like something did, and now you're stuck. I would guess that the only way to fix it would be to reflash the OTA (which you can't because you can't boot), or run the RUU for 4.22, which isn't available yet. My speculations may not be accurate, but that's my guess!

ReRoot:Failing bad after Ruu to 3.70

Hello All after searching and following directions of multiple threads including this one http://vaelek.com/index.php?/topic/1666-guide-how-to-un-root-re-root-your-evo-4g/ Unrevoked3 method and this one http://forum.xda-developers.com/showpost.php?p=8223391&postcount=1 Auto root method, Im completely stumped and lost on what to do next. Im a half a noob.
After having some flashing issues with any non aosp Gb roms, I was forced to do Unroot rerrot method in hopes that would fix it.
So I Ruu'd to this setup:
hardware 0003
2.15.00.11.19
3.70.651.1
pri 1.90_003
prl 60679
and was able to get back to stock 2.2 and s-on
So then trying to root again, ran into issues.
Unrevoked method:
Installed usb drivers & htc syn(then uninstall)
Debugging on
Phone charge mode
and when i get to step to run Unrevoked, I get to the familiar waiting for device.
Does this everytime
Note that might be important: Step Where i go into Device Manger, I never have "Other Devices" listed-Android 1.0 like its says it should. However, Im still able to install/update drivers under"Disk Drives" Htc Android Phone Usb Device
One Click AutoRoot method:
Followed steps as it says and when i get to right click on Autoroot.bat & run administrator Step, Black box pops up, Runs through its thing it says it doesnt recognize advice. Tried over and over same thing.
btw im on Windows Vista 64 bit
Heard that trying a previous version of unrevoked3(3.2) could solve this issue but had problems finding anything other than updated version. v also tried switching usb cables and other little things you would not think it would be but im desperate.
i dont know what else to do. Ive been searching google all day. Please please help me.
Do you have usb debugging enabled from your phone?
Sent from my PG86100 using XDA Premium App
Yes of course
Sent from my PC36100 using XDA App
Xhausx man this m is killing me. I finally unrooted which I also trouble with and then I think
im good to go,all ihave to do reroot FINALLY! Yeah right. Frustrating as hell!
Sent from my PC36100 using XDA App
Can someone help with this please? Sorry if I'm doing something I shoukdnt, but I haven't been able to enjoy anything regarding rooting/flashing & it hasn't been from lack of training and effort. So many problems iv had and I just want to be able to enjoy like everyone else. I'll be here to answer any questions that might help someone help me with this.
Thank you 1000 times for XDA
Sent from my PC36100 using XDA App
Been doing looking online to figure why neither option is recognizing my device and still cannot root.
Could there be a chance the reason is I'm on a 64 bit system?
Any kind of help here would be great.
Sent from my PC36100 using XDA App
htcevo4g03 said:
Been doing looking online to figure why neither option is recognizing my device and still cannot root.
Could there be a chance the reason is I'm on a 64 bit system?
Any kind of help here would be great.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Is you phone on 2.2 or 2.3 unrooted? Also you installed the modified hboot drivers from unrevoked?
Ruu'd back to 2.2, my current set up is in op. And yes installed drivers, followed exact directions of the both Unrevoked method and autoroot method exactly as the directions say. Neither method is recognizing my device. See op.
Sent from my PC36100 using XDA App
First and foremost, you need to turn usb debugging back on.
Sorry that was a typo, i always have it on when its suppose to be, sorry.
Sent from my PC36100 using XDA App
After you installed the drivers, you see android bootloader interface once the phone is plugged in? Also, reboot your phone and pc, then try unrevoked again.
Yes I see that but I dont see Android 1.0 under other devices in device manager. Thought this could be part of the issue as well. Your suppose to see that after installing drivers and plunging in phone.
As a last resort I'm trying a different pc as we speak. If you have a step by step directions maybe something that is easy to follow that would be great. Starting the downloads now on the new pc.
Sent from my PC36100 using XDA App
htcevo4g03 said:
Yes I see that but I dont see Android 1.0 under other devices in device manager. Thought this could be part of the issue as well. Your suppose to see that after installing drivers and plunging in phone.
As a last resort I'm trying a different pc as we speak. If you have a step by step directions maybe something that is easy to follow that would be great. Starting the downloads now on the new pc.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
This is my guide to rooting...so far flawless victory for those that have used it.
Rooting
1. http://unrevoked.com/rootwiki/doku.p...driver_install ; Download the hboot drivers needed for rooting. The instructions are also there of how to install them, straight forward.
2. Download unrevoked3 > http://unrevoked.com/recovery/ ; It will show up as reflash_package on your desktop; leave it alone for now
3. On your phone from a home screen: menu > settings > applications > development and make sure usb debugging is checked; needed so that unrevoked can find the phone; never turn this off
4. http://www.htc.com/us/support/evo-sprint/downloads/ ; Download htc sync and install it. After that, uninstall the program from your computer ; you only need the drivers from it.
5. On your phone, connect the to the pc in CHARGE ONLY, do not mount as a disk, ect, has to be charge only
6. On the desktop, run unrevoked [reflash_package], accept the disclaimer, blah blah
7. Just sit your phone down and let it do its thing. It'll take about 5 minutes, and the phone will reboot twice. Once its done, it'll say done. You can open your app drawer and you'll see an app that says superuser, and then you're done.
IF unrevoked tells you 'is your firmware too new?' boot into the bootloader [while turning the phone on, hold vol+down till you see a white screen with androids skateboarding.] Use the volume keys to navigate after the scan completes to clear storage [a factory reset, data will be lost] and then use the power button to select it, then repeat step #6.
To tether, you can flash a custom rom of your choosing after you've browsed, and then use the built in hot spot, or download wireless tether from the market, more later after you root.
Unrooting
1. http://unrevoked.com/rootwiki/doku.php/public/forever ; Scroll down to the FAQs, then download the unrevoked s-on zip. This places the security back on your phone, because rooting makes it s-off, and if s-on, quickest way to tell your phone was rooted.
2. Flash that file from recovery, then boot back into the bootloader [vol+down while turning phone on] and verify until its s-on.
3. http://dl.dropbox.com/u/19699565/3.70 RUU Zip.zip ; rename that file to PC36IMG, place on the root of your sdcard [not in a folder] then flash it in the bootloader. When the scan that normally does nothing, it'll detect that file. Apply the update then reboot. That's a stock 3.70 firmware file, it'll take you back to stock, unrooted, s-on.
Ok will try it and let you know thank you so much
Edit
the first link is no good but i just googled unrevoked wiki and i think i got it
Sent from my PC36100 using XDA App
htcevo4g03 said:
Ok will try it and let you know thank you so much
Edit
the first link is no good but i just googled unrevoked wiki and i think i got it
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
No prob.
1st link for hboot drivers: http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
Hey I ran into an issue after right clicking android 1.0 and it starts installing, it then says
Hardware Update Wizard
The harware was not installed because The wizard cannot install the neccesary software
Click back if you have installation media such as a disK or if you know the location of the software????
what should I do?
htcevo4g03 said:
Hey I ran into an issue after right clicking android 1.0 and it starts installing, it then says
Hardware Update Wizard
The harware was not installed because The wizard cannot install the neccesary software
Click back if you have installation media such as a disK or if you know the location of the software????
what should I do?
Click to expand...
Click to collapse
You need to click the bottom option of browse my pc for files, select browse, then navigate and select where you downloaded the hboot driver folder to, then make sure include all sub-folders is checked.
teh roxxorz said:
You need to click the bottom option of browse my pc for files, select browse, then navigate and select where you downloaded the hboot driver folder to, then make sure include all sub-folders is checked.
Click to expand...
Click to collapse
Sorry Im obv one of the biggest noobs youv prob ever dealt with lol Got the drivers installed on to the next steps, thy for helping me out, its been months and im starting to see some light because of you!
Yo Got to part where I rum Unrevoked and OFCOURSE same ****, sorry im so frustrated with this whole process.
Same thing Waiting for Device Plug phone in now and enable debugging. Make dure Htc Sync is uninstalled. And this is a DIfferent pc but getting the same exact result, this is UNBEL!!
Everything went as it should but when opening unrevoked and the white box pops up it does nothing, it was the same issue I had on the original pc so I dont know at all what it is.
Iv given up for the night. Can't tell you how frustrated I am.
Sent from my PC36100 using XDA App

Categories

Resources