[Q] HTC Touch Diamond ROM Upgrade for Egypt (GPS Enabled) - Touch Diamond, MDA Compact IV ROM Development

Hi everybody i need to install this rom
HTC Touch Diamond ROM Upgrade for Egypt (GPS Enabled)
this is the official site version but my serial not Egyptian serial so i can't download it if any body have serial no to touch diamond p3700 from Egypt ?? or anyone can download it and share with me ??? thx all

MOST IMPORTANT STEP: Press Start menu > Settings > System > Device Information
NOW note down the ROM Version, ROM date, Radio Version and Protocol Version in notepad file or where ever you want. Just make sure you have all these information before you try updating your device. Better you post these information here even. That way you have a backup online.
FOR THE PAST TWO WEEKS THEIR HAVE BEEN ALMOST 4 SUCH CASES. Luckily i was able to rescue two of them.
****Many have tried to update their device with the WRONG ROM and ended up having a non-functional (dead) device.****
SO go to htc site where your serial is ACCEPTED and download the ORIGINAL stock rom intended for your device. Keep this file safe, if you want to rescue your device after any mistakes.
I repeat DONT FLASH ANYTHING before reading what i have said below.
You should consider yourself a bit lucky as the serial did not match. Else you would have end up making your device dead.
Reason: Since your device is not Egyptian, means you cannot install a rom that is intended for Egyptian specific device.
But dont worry yet. I happen to have a Middle East serial. And i can download that Egyptian ROM for you.
Then again i dont want to be responsible for breaking your device.
So i ask you to learn how to enable your device to accept any OS. (even if its the eqyptian ROM OS you want, i can make it for you, without touching anything else)
1. Step 1 for you to learn is about Hard SPL.
http://forum.xda-developers.com/showthread.php?t=416211
2. Step 2 for you to learn is about mtty.
http://forum.xda-developers.com/showthread.php?t=540290
Dont come back unless you have read through those 2 steps.
PS: I m not being rude. Because you cant understand the frustrations i have felt from people who ended up causing their devices to be dead. I m telling every precaution before hand since you asked BEFORE flashing anything

thank u very much but i know alll of this allready all i wanted serial no from egypt to allow me to install this rom because my gps is locked in egypt thank u very much

Okay. Thank God!
Didn't know you knew all this already, since you seem new here. I have sent you the serial in a PM. check it and download from HTC middle east.
TC.

thank you very much

pls i need this serial very much to download this rom for egypt

check your pm dude. btw i wish to you all the best and everything settles down for the best in egypt (i assume you are living there)
memo77 said:
pls i need this serial very much to download this rom for egypt
Click to expand...
Click to collapse

ayyu3m said:
Okay. Thank God!
Didn't know you knew all this already, since you seem new here. I have sent you the serial in a PM. check it and download from HTC middle east.
TC.
Click to expand...
Click to collapse
Can you please provide me with Egyptian serial for HTC touch diamond?

TRY ONE OF THESE MY FRIEND
serial; HT840GN37787 or ht837gn28022 or HT838GN42325
but this is the best official rom http://www.mediafire.com/?jnjydmnnojg
you have to try it and install only (MOBiDIV_Arabware_454_EN_TSD_2010_Jan_28),google it
have fun

Thanks for supporting us
Could you please send it to me too , Thanks

Related

xda zinc rom upgrade

can somebody please help me , i need the new rom upgrade from www.see02.com
i cannot download this for my device is not recognised, by there system,
please help if you have the possibilty
kind regards
peter
I am having the same problem.
Same here...
Any helper please.....
pcsw said:
can somebody please help me , i need the new rom upgrade from www.see02.com
i cannot download this for my device is not recognised, by there system,
please help if you have the possibilty
kind regards
peter
Click to expand...
Click to collapse
well i would have told you how to get the rom if you wouldnt have provided a llink to a very dubious site
ROM for O2 Xda ZINC is it available and where ?
The link supplied is incorreect, below is the correct link for O2.
I have also tried to get the Rom to change my chinese version of Zinc to English version, and the message is I don't need the upgrade.
Any help anyone can offer on where to get the english rom would be much appreciated.
Here is the correct link for O2, http://www.seeo2.com/
www.seeo2.com
Thanks guys.
ralphyzinc said:
The link supplied is incorreect, below is the correct link for O2.
I have also tried to get the Rom to change my chinese version of Zinc to English version, and the message is I don't need the upgrade.
Any help anyone can offer on where to get the english rom would be much appreciated.
Here is the correct link for O2, http://www.seeo2.com/
www.seeo2.com
Thanks guys.
Click to expand...
Click to collapse
http://www.seeo2.com/user/template/UserDeviceRegistration_Prepare.vm?from=XdaZinc_RUU_Mar2007_WWE.vm
register with imei and download
I realy havedificulty to register.
is there any just link like the usual download link.(No need to do registration).
fallenczar said:
http://www.seeo2.com/user/template/UserDeviceRegistration_Prepare.vm?from=XdaZinc_RUU_Mar2007_WWE.vm
register with imei and download
Click to expand...
Click to collapse
Thanks for the advice.
Tried that already, the problem is that I need english on my phone, and living in Taiwan, the default is chinese. So anyway, after contacting the service dept, they told me that they regulate the IME numbers to the O/S therefore, you can not download a ROM that was not originaly shipped with the device.
Which really makes things difficult for me. Currently I am trying to negotiate with them to update the O/S themselves at the service centre, and would you believe, they have to get Authority from Head Office to make the change.
I really dont understand, its only a firmware image, and since I already bought the phone why are they worrying about what IME number runs what O/S.
Its beyond me.
So anyway, to anyone who is looking to CHANGE the O/S between languages it seems not that easy to do. Just buy the phone with the right language from the start and things will be much easier.
Please....
Please.....
Any holy hand........
is it that dificult????
or is it so new that none of the master herewent through this?
Well, after spending a total of 2 hours on the phone with O2 Asia, 3 different people the outcome is : "THEY SUCK!"
They have tried to tell me that it is NOT possible to upgrade the ROM image, and if I did change teh ROM image, it would VOID the warranty, what these things have in common is beyond me.
They are full of crap. I will NEVER buy a phone from them again and I strongly suggest to anyone thinking about it that there are many other alternatives out there, forget O2.
They are very polite but very very useless.
Their recommendation was "Return the phone" , and get another make.
So people keep away from these guys! That's my advice.
If I am in you posisition I would not think about the waranty right now.
The most important is to get the rom first then until you encounter a prob. you flash the rom to the original one that come in sales pack.
Thats it.
Don't forget to post here If you have got the rom.
Same with me either if I get it first I will post it here.
ralphyzinc said:
Thanks for the advice.
Tried that already, the problem is that I need english on my phone, and living in Taiwan, the default is chinese. So anyway, after contacting the service dept, they told me that they regulate the IME numbers to the O/S therefore, you can not download a ROM that was not originaly shipped with the device.
Which really makes things difficult for me. Currently I am trying to negotiate with them to update the O/S themselves at the service centre, and would you believe, they have to get Authority from Head Office to make the change.
I really dont understand, its only a firmware image, and since I already bought the phone why are they worrying about what IME number runs what O/S.
Its beyond me.
So anyway, to anyone who is looking to CHANGE the O/S between languages it seems not that easy to do. Just buy the phone with the right language from the start and things will be much easier.
Click to expand...
Click to collapse
have you tried registering on the site????
you should be able to register no matter what language your rom is....
it says within 7 days of purchasing your phone your imei no becomes available for registering
How come some some imei will be imidiately accepted, and some have to wait for 7 days?
Because I use my own imei and they say must wait 7 days, and I use my friend's imei they accept it imidiately and say no upgrade needed.
or maybe you're entering the wrong imei, like me tried more than 10 times. it say enter the right imei or wait for 7 days after purchase.
the IMEI will be accepted once you register it at the website but do keep in mind that the IMEI can be register on the country site only (i think) also as for the new ROM i think they have removed it since i couldn't find it anymore .... well i have uploaded the rom to esnips ... link down
http://www.esnips.com/doc/5a03b941-868e-45f8-a125-bcca46523b47/Zinc_WWE_RC4070131_3
but do keep in mind doing the upgrade might void the warranty
how to get bootloader for xda zinc
i just get newest rom for xda zinc for seeo2.com but when upom the creen said " cross-language not alowed" . now i wan to get in bootloader but i don know how can i get in
pls anyone can dot it and give advice\
brgds/meohp
meohp said:
i just get newest rom for xda zinc for seeo2.com but when upom the creen said " cross-language not alowed" . now i wan to get in bootloader but i don know how can i get in
pls anyone can dot it and give advice\
brgds/meohp
Click to expand...
Click to collapse
Hi, meohp. Can you also give me the eng WM6 rom?

Big Big Big problem new rom

Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!
You might have better luck asking for assistance on this subject in the Artemis upgrading forum:
http://forum.xda-developers.com/forumdisplay.php?f=318
andreazzo said:
Good morning all
Is the first time that i write in a forum, i'll try to explain my problem and i hope that somobody can help me.
I'm working in china and one day i lost my thelephone, so i decided to buy a PDA HTC P3300.But only after some day i saw that some thing was not working, so i'm tring to downgrade a new rom.
Here i had my problem, i followed all the details that i found on internet, also i took some informations and file from this forum to coplete the procedure like Hard SPL and so on, the problem is that when activesync is connected to the device i launch for example Hard SPL to upgrade it but after the program showed me the version installated and i said upgrade, i waited for a while and then the progam told me to check the usb connection (i tried whit 3 different cable) ERROR 260.The same thing happened when i tried to change the ROM.
CAN SOMEBODY HELP ME PLEASE?? I NEED THE PDA ALSO FOR WORK.
Thank you everybody!
Click to expand...
Click to collapse
Hard Spl??? For the Artmes?? Mate are you trying to brick your device cause it seems you are doing a pretty good job of it too,Hard Spl is NOT for the p3300 it is for the Hermes and Trinity which are two very very different models of HTC. Please make an effort to read the Wiki before you start messing with the phone.Try flashing the t-mobile stock rom FOR THE ARTEMIS(WITHOUT THE HARD SPL) and hopefully it may work also find out from your buyer if it is CID unlocked though i doubt wether they would know.
Check in Settings - Connections - USB to PC that the USB advanced network functionality is not ticked. That's caught me out in the past after making changes.
This is assuming that others in this forum are correct and you've not yet made a brick using the wrong model. Good luck!
One problem more on rom
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye
andreazzo said:
Thanks all for your answers
sorry but i still had one problem more
As arvind09 said i read almost all Wiki before do some other stupid things, i downloaded anhoter rom from this page:
http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
but the rom that i found is HTC rom 1.12.405.101, and is not working on my artemis, i looked in my system and i saw that i need this ROM 1.13.110.101
wich is not downloadable form that page. (AM I RIGHT?)
May i know where i can find the rom T-mobile 1.13.110.101 ?
If i wrong some other things could you advise me.
Thank you again and sorry for my incompetence
Bye
Click to expand...
Click to collapse
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.
arvind09 said:
Try the thread by bdangol in this forum,he has posted the link to the 1.13.110.101 rom,all the best.
Click to expand...
Click to collapse
T-Mobile Here
Did you buy it in China?
If you bought the phone in China, there will be 2 versions. 1 for the chinese market (han huo) and the others are for other markets (usually europe) then flashed with the chinese rom (shui huo). As far as I know the chinese versions aren't locked and the foreign market versions musn't be locked either due to the fact that they have to put on the chinese rom

Offical Rom SSPL loadermethod for p3600 d810 m700 with noSPL noIPL noRadio

For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
LOL, sorry mate but that really IS a noob question
works perfect !
Thanks man
doudydoudy said:
hi , sorry for the noob. question but i'm not a native english speaker and would u tell me plz what u mean by "flash it" ? i guess uploading it to the PDA then install from there? or run it from PC or using sync. or ... ??
Click to expand...
Click to collapse
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!
Thank's a lot Shadowmite,
Just one last question before I try :
You're refering to the "Hard-SPL_ZakMcRofl.zip" in your first post. On the other hand, I saw you opening a thread regarding the new "Hard-SPL 1.30 MFG - Oli.zip".
Which one should I/we use, or doesn't it make any difference.
Having a SFR/Vodafone s300+ I'm a bit scared as there's no genuine rom to downgrade back to in case I get blocked.
Bye
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thank you so much!
I want to try this ROM right now, but I don´t have access to rapidshare-like sites here in my office.
Can someone upload this ROM to a public server ZIPped and RARed with password (to avoid proxy to sneak into the file... it's blocking some downloads...)
I can setup a FTP account. If someone can upload the ROM to my server, I can share the ROM with people who has the same problem with rapidshare-and-stuff sites.
Thanks!!!
installed the rom.
but....
now i want to return to the original rom and downgrading i obtain a vendor id error.
I tried to cid unlock the device also and the error i the same. any ideas that can help me?
thanks
junwei83 said:
Check out racerx_'s guide over here:
http://forum.xda-developers.com/showthread.php?t=316098
It has step-by-step guides with pictures to guide you along. By the way, don't do anything before you read through the tons of information you can find on this site. Just to be on the safe side.
Hope this helps!
Click to expand...
Click to collapse
wow man ! thanks a LOT ! i really appreciate it
only a few ppl would stop and help
thanks again
racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse
Tried with the Olipro and everything works fine.
Big thanks to all the people on this forum always ready to help.
Shadowmite said:
For those of you with a device that is NOT supported for the official WM6 rom release, this is what you need to do to flash it to your device. It is a reversable process (save for m700 users, you all need to backup your OEM rom first).
First step, if you don't have it already get hard-spl:
http://forum.xda-developers.com/attachment.php?attachmentid=42938&d=1183561237
Second step, flash it if you didn't already have it.
Third step download my safely converted update:
http://rapidshare.com/files/4219712...oIPL_noRadio_offical_rom_sspl_loader.rar.html
Step 4, flash it.
If you want the radio, proceed to use the others posted here at the forum...
Click to expand...
Click to collapse
Thanx, process working...
Version of this rom?
SEA or ANZ?
Thanks
I've just updated the SPL with the one provided on this post...
It seem to be the Des’ Crash-Proof SPL...
I have this informations on the screen when starting in boot loader mode:
------------------------
TRIN100
IPL-0.50
TRIN100
SPL-9.99.CP
------------------------
which versions we have to use ??
I think that you previously talking about olipro ?
racerx_ said:
because he wrote that post before Olipro released his updated Hard-SPL.. use the new one.
Click to expand...
Click to collapse
ROM working but...
Hi there!
First of all thanks for the trouble of getting the nasty bits out of the bundle and giving us just the OS
But... (there seems to be always a "but" with WM6) I've been having some problems with this:
- VOIP is nowhere to be found, no SIP settings anywhere.
- Memory Stick corruption. From time to time my SDHC stick goes crazy, showing up strange characters for the filenames and only a soft-reset gets it back to normal.
- Did any of you guys manage to get Video Calling working?
Well... the major deal for me is the Memory Card issue... Anyone having the same problems? Any ideas?
Best,
M Addario
--
HTC P3600
any hard-spl will work for this repackaging of the release.. you're fine to proceed
yes, you have Des' crash-proof SPL
addario, there's really no need to post the same question in multiple threads..
This rom seem to not contain any ext_rom ...
The "Device Information" module dont report any EXT_ROM version ...
it's "normal" ?
The attached screen capture show the "Device information" tab.
There is no informations about the ext_rom.
I also cannot access to it thru Total Commander.
So... it seem that something is corrupted on this rom update...
Some Info....
@ Shadowmite
Dear could you please tell me from which version did you re-make this ROM & why is there no detail showing of ExtROM in Device Information.
Hi,
I'm completely new to all this but have done my best to try and figure it out for myself but I'd still like to make sure I've understood a few things correctly...
I have an SFR s300+ bought here in France. The OS is WM5 and I'd like WM6.
I have allready tried out the "off"+"camera button"= soft reset to see if I needed to install a hard SPL : I do. I've downloaded Des' Crashproof (due to the reassuring name).
I can now install that by following the guide without backing anything up yet...
Once done I will have to copy all my important info and then I will be able to flash any ROM of my choice (English, French, official or not) is that right? If I'm not mistaken and I can install any ROM, which English ROM is the best (this one looks good...)?
I'd also like to know if I have to install a radio after this or will the one I have at the moment (that works fine) be preserved?
If I do have to install a radio which do you recommend for SFR in France considering I sometimes go to Spain.
Thanks for your help

Need ROM for US Touch Diamond

Hi All,
Please help me getting a ROM for my HTC Touch Diamond i bought it on eBay. I checked with HTC people they said my phone is US based. I downloaded the new realeased ROM from HTC Website however when i am updating, it goes till 1% and says "invalid model id". I have some stupid Dutty's rom on my phone i want the original HTC rom. Please help me getting this.
hi there, welcome to xda-dev,
Take a lookie at here http://forum.xda-developers.com/showthread.php?t=409425 and after that check out here http://forum.xda-developers.com/showthread.php?t=416211
Also a good way to check to see what version of the diamond you have is, the US version has no front camera, but the EU version does ^^
I dont think kboots deserves any help here.
he's way too lazy to search around, and call Dutty's rom stupid.
Sorry imatrix but didnt mean it. I am so frustrated with the duttys version, it doesnt allow me to do anything with my phone. Gets hang everytime, weather doesnt work. Sorry about that, i did lot of research on the same thats the reason im here now. Thanks Abiscas for your reply, ill follow your steps and would let you know how it goes.
Hi Anubis23, I tried these steps and now i dont know how to get the latest rom update. I have a US Touch Diamond with no camera in front.
Please help.
your diamond may come from India actually
http://forum.xda-developers.com/archive/index.php/t-421128.html
I dont know whether this has any use for ya but here ya go
http://forum.xda-developers.com/showthread.php?t=429324&highlight=India+2G
I would just follow
http://forum.xda-developers.com/showthread.php?t=416211
ha when I got my first HTC it had Duttys on it as well and i didn't know about ROMs and flashing... I then put an original to learn from the beginning and when i knew my way around winMo I put Duttys back his ROMs were great, not the best for me personally, but great overall
ahh the memories
hi
kboots said:
Hi Anubis23, I tried these steps and now i dont know how to get the latest rom update. I have a US Touch Diamond with no camera in front.
Please help.
Click to expand...
Click to collapse
Hi, seeing how you have dutys rom on your phone, its safe to day you have HardSPL on your phone, but before you start flashing other stuff, check in here, press VOLUME DOWN + RESET and it will take you into the bootloader, when you are in there it should say which HardSPL you have, and also which version of the diamond you have india or US but doesnt matter really, after you check your bootloader and what not and your diamond version which should be DIAM110 you can go here http://www.htc.com/www/SupportDownload.aspx?p_id=133&cat=2&dl_id=483 and enter your SN behind the batter pack to download HTC stock diamond rom.

Need some help please

I bought a Htc Diamond on a market, it was installed with something called HardSpl and a ShineRom, i would like to use the official ROM on HTC webpage, contacted them, and they just told me since it was a 3th party rom they could not help.
Can one of you please tell me how to roll the official rom back on the phone?
I have tried searching this forum, but i could not find a simple explanation, i have never updated a phone before, and im pretty sure i will break it if i try without help..
So please, could someone guide me though this.
THanks..
Dan
Just flash any Original ROM back
See the HTC site, give ur IMEI and download a ROM. or search here in the Forum
Just Follow the Instructions on the Update tool.
WBR
Siemens Lover
But i read somewhere, that this is not possible to just download the rom update utility from their website, because of the hardSPL installed on my Phone?
Then installing their rom will brake the phone..
Or am i wrong?
Thanks yet again, for answering my stupid questions.
Behinf your battery is a serial number, just enter tyhat on the HTC site and you can download the latest original rom.

Categories

Resources