Develop Bugs

Can't lock phone / put in standby (solved!)

Hello all,
My phone is not working properly. I've had some bugs most people seem to be having, but now I have something which is quite annoying. I can't find it on these forums or anywhere on the internet.
I have seen a 1 line reference to my problem here:
/showthread.php?t=666332&highlight=standby
Flaws & annoyances with the HTC Desire (with workarounds!) [updated Apr 23, 2010
Hardware defects. Eg. Dust under screen, device not going into standby properly. Most of us don't experience these. Contact your retailer to exchange the unit or HTC to claim warranty.
So, I seem to have this problem. The phone wakes up with whatever button I press, and I don't have to unlock the phone. I have a unlock pattern set. It also doesn't ask me for this.
I couldn't find a proper topic about this problem, but I assume I'm not the only one. Is there a fix, or is it a hardware problem?
It wouldn't make sense to me if it's a hardware problem since the screen does turn off when I press the 'power' button.
Any info would be appreciated.
Thanks, Bart.

Which Lock?
are you using the built in lock or a third party lock app? I had the same problem when I used LockBot. If it's the standard lock, have you tried Powering the phone off then back on?

I am just using the built in application. I haven't used any other lock app.
I have tried turning the phone off twice, and both times it came back (might have been after charging it, but I don't know at all if that's the reason).
edit: I'm gonna try to recreate the problem with restarting and trying to find out when it stops working properly.
edit2: I restarted now... and it hadn't saved the new background I set... strange... :/
edit3: Ok, it still locks itself... I guess I'll just need to wait and see when it doesn't work anymore... maybe it's just a matter of time for it to stop working...

The problem that you quote in your opening post is probably the problem concerning the Desire (or rather an application running on the Desire) not properly releasing a wake lock which causes severe battery drain, e.g. the calendar app about which another thread exists.
Your problem seems to be quite strange. You do not happen to have an application called 'No lock' installed, right?

No, I don't have 'No lock' installed.
I use 2 calander widgets though... (the little one on my home screen, and an more advanced one on another screen.)
I've got quite some applications installed though... I'll just type them here, maybe someone can see something wrong...
Math Workout Lite
EStrongs File Explorer
Alarmering Droid
Groceo-NL
Q-Park parkeerfaciliteiten
ATM Locator NL
Text-To-Speech Extended
Google Translate
G-MoN for Android 2.x
Buienradar.nl v2
Gesture Search
Scoreboard
Listen
My Tracks
Air Horn!
Bonsai Blast
Star Wars Light Saber
Kaloer Clock - Night Clock
Coloroid
AudioManager Widget
IMDB Top 250
Pobs
Simply Cyanide
Voetbal nieuws
Barcode Scanner
Classic Simon
XDA-Developers
Backgrounds
SchottGunn
Shazam
Funny jokes
Ringtones
Google Maps
Google Goggles
I'm just trying some of the stuff of course... It's quite a long list...
Maybe Kaloer Clock brakes something?
I'll use it tonight again, going to sleep soon... Maybe it'll be broken again tomorow.
Lets hope it wont brake again... but that's probably too optimistic.

First off: sorry for the double post, but I have some new information which will also mean the end of this topic.
This morning it didn't work anymore, and the only application that did it's thing this night was the kaloer clock (night clock).
I looked at the settings, and there are some settings about screen lock.
It's not clear at all, but I changed some settings, and it locks again.
So, I guess it was just me using an app which I didn't fully understand. I'm glad you guys helped me though. And I'm definitely glad that my problem is solved!

Google Sky Map problem after 2.2 update

Hello all,
Sorry if this was covered already, but I couldn't find anything about it.
After updating to 2.2 (OTA), Google Sky Map orientation seems to be acting weird. If I hold it so that I can see the horizon, with the phone in front of me, then spin around in a circle, the program doesn't pick up that movement. It used to work fine in 2.1.
Anyone else experiencing similar problems?

No problem here. Sounds like your compass. Do you have the same prob in street view?

Yes, same problem with street view.
I noticed that if I turn the phone around a bit, tilt up and down while rotating it, then it starts to work. As soon as I kill the app and start it again, I have to do it again. It's as if it's doing some calibration on the g-sensors while the app is running, which is then forgets when the app is killed.
Again, the exact same behaviour happens on street view and sky map.

Same thing is happening with the "Compass" app. At least this one gives me some feedback: "Abnormal magnetic field detected. Please calibrate your device". Doing a "figure-8" calibration solves this in every app, but the problem is that it never stays calibrated. I'm hoping someone else will be able to chime in with a possible fix before I try to do a full factory restore.

If anyone else is having this problem, a factory reset fixed it.
It's a bit of a shame because now I don't know what was really causing the problem.

I'm glad I am not the only one having this problem but I am not going to reset the phone. Has anyone called Sprint about this issue? If I have to reset this thing then I will be resetting to different hardware and a Windows 7 device in a few months.
Going to call Sprint to find out what they can do.

LabRat02 said:
I'm glad I am not the only one having this problem but I am not going to reset the phone. Has anyone called Sprint about this issue? If I have to reset this thing then I will be resetting to different hardware and a Windows 7 device in a few months.
Going to call Sprint to find out what they can do.
Click to expand...
Click to collapse
I am afraid that factory reset is gonna be only one possible solution. Take a look at this thread: http://forum.xda-developers.com/showthread.php?t=747398 I faced similar issue on my Desire. In a nutshell, all apps using embedded compass functionality just acted up (including Google Sky Map) after OTA update to 2.2.

I had a similar problem and then realised it was the magnetic clip on my case causing the problem
Sent from my HTC Desire using XDA App

I've experienced the same problem too.
When I started skymap, the orientation didn't change, no matter how much I was waving the phone.
But today I tried to just uninstall it, reboot and then install it again. Strangely enough, now it's working again .
So you could probably try that first before considering hard reset.

Every time I use a program that uses the compass I do this trick or the compass wont work for me
http://www.youtube.com/watch?v=sP3d00Hr14o

[Q] Switch-off bug? - (for those, who are planning to install stock gingerbread)

Hi guys!
I wanted to share a quite annoying thing I've noticed since installing the new stock gingerbread.
In short: my phone cannot be turned off. In addition it took me about a week to find it out properly, because it acts like switching off. There are two strange things: 1. it seems quite fast when switching on (it is actually, but it is more like returning from sg. like sllep/stand-by mode), 2. my battery was drained during the nights.
Now I have to enter boot menu, and select power off there.
I tried to search forums (this one and from other sites as well) but I couldn't find anybody else who experienced the same. So be aware of this new software, particularly because your phone cannot be downgraded or rooted yet (I hope someone finds a solution for this too).
Any ideas?
Thanks.

I think it's to do with Fast boot. You could turn it off and try.
Settings/ Applications and it's at the bottom.

Thanks a lot, I tried and it solved my problem immediately.
Actually it is quite embarassing, because it was only one single click. I couldn't remember of this fast boot option from FroYo, now my phone is usable again.
Thank once more!

Lol, that's the fastboot feature, which can be turned off.
Sent from my customized HTC Desire using TTP

[Q] Synergy RLS1 Keyboard issues

Couldn't post this in the synergy thread as don't have enough posts. Have not seen anyone else with this problem.
About once a day my keyboard will no longer display what I type on the screen. I can see it cycling through the dictionary but nothing will end up on the screen. Been doing this for the last several synergy releases.
This is with ANY keyboard as have tried the default android, Gingerbread from the market and Swype. Once I reboot the problem goes away for a time.
Problem usually surfaces in Handcent or Enhanced Email as those are the programs where I am the most and typing.
Anyone else run into this?
Thanks!

fraslin said:
Couldn't post this in the synergy thread as don't have enough posts. Have not seen anyone else with this problem.
About once a day my keyboard will no longer display what I type on the screen. I can see it cycling through the dictionary but nothing will end up on the screen. Been doing this for the last several synergy releases.
This is with ANY keyboard as have tried the default android, Gingerbread from the market and Swype. Once I reboot the problem goes away for a time.
Problem usually surfaces in Handcent or Enhanced Email as those are the programs where I am the most and typing.
Anyone else run into this?
Thanks!
Click to expand...
Click to collapse
No idea, I used synergy for a good long time and never had that issue. What I'd suggest you do:
Use the stock e-mail and messenger apps for a day and see if the problem happens in there. If it does, then you might need a clean, fresh install. If not, then you know the problem lies Handcent and Enhanced E-mail apps and, thus, I recommend finding replacements or learn to like the stock apps.
Worst case, just reboot the phone when it happens. Reboots are like erasers, it fixes all the problems.
If I helped, please hit the thanks button ^_^

Thanks for the reply!
Am assuming that a clean install would fix but have been seeking to avoid.
I did switch to Smart Keyboard Pro from the Gingerbread one and it seems like it may have fixed it.
Need a couple more days to verify...

Widgetlocker Lockscreen Issue: Slider slow to respond. Help!

Hey guys,
I've been having issues with the Widgetlocker lockscreen recently, and was wondering if any of this will ring a bell with someone.
I recently flashed the KJ2 2.3.5 ROM (the XEU non-wipe Frankenstein one), and i've also flashed CF-Root and then the Speedmod kernel. I'm in the UK, on O2 (debranded to XEU) and i have no issues with the phone whatsoever. I even get great battery life. It's just this damn widgetlocker issue that's grating on me!
For some reason when i wake the phone up and try to unlock it by using the slider (i just use the default 'Android' one for unlocking - the only other things i have are a couple of widgets for missed calls & texts and a battery % one) a lot of the time the slider does not repond to touch. It doesn't always happen, but maybe a good one out of every three times it happens. And the weird part is, if i then just wait about 5 seconds, then it suddenly responds and i can unlock the phone. Obviously having another 5 seconds on top of the already present lag when pressing the home button is not good, and because of this i'm thinking of not using WL anymore.
I've been through all of the settings, i'm almost 100% sure it's not something in there. Can anyone help with this?
Cheers guys.

Happens with me too sometimes. Another issue is if you keep pressing Menu button 4-5 times the phone gets unlocked and takes you to the home screen.

Hey, just wanted to post that i finally figured out what the problem was.
I'm using an .apk to help with the touchscreen sensitivity. See vitalij's thread here:
http://forum.xda-developers.com/showthread.php?p=18999801#post18999801
Well it turns out on 2.3.5 vitalij's .apk has some issues with the most up-to-date superuser. The solution, so far, isn't great but gets the job done, is to uninstall the .apk, and then re-install. The important part is not to click on 'enable service' in the app! So basically each time you want to use the app you have to open it and hit 'apply' on whatever setting you need. The setting will work until you next turn the screen off. For me this workaround is actually ok, as the only time i ever really used it was for the odd game, so i'm happy to just do it manually on these occassions.

disable root helper

madrano, can you expand on what you mean by this? i have tried enabling & disabling root helper but if i remember correctly the problem was still there.