Ok, so I threw that at the window and learned how to do a reset! Now how do you change the settings to force 3g and drop edge? I read it on here somewhere but seem to find it now!
I you force edge out ,obviously your battery drains faster, but does it just revert back to the original settings after syncing? Also , the memory usage seems to be higher on 3g ?
i dont kno if the signal reverts back but i do with the 3g using more data because 3g is a faster network an then pushes more data on to the device, edge is a slower network that so less data to process thats why 3g uses more prossesing power i had edge for a wile but now 3g
Related
The problem: At home, my 3G signal is very weak - occasionally it reaches 2 out of 4 bars, often it's only one and it frequently drops out altogether causing the phone to switch to EDGE. At work, however, I get a very good 3G signal, so it would be useful to use 3G.
Now, in theory the "Auto" band setting (auto between GSM and WCDMA) ought to cover this; but in practice the 3G signal at home is just strong enough that the phone keeps trying to switch into 3G mode (and thrashing the battery) but the actual data speed I get (even over HDSPA) doesn't seem much faster than EDGE, and every time it loses the HDSPA link and drops to EDGE there's a long pause before the data starts flowing again.
I've tried switching the phone's band setting between "GSM" and "Auto", using the GSM setting at home, and Auto elsewhere; but doing that plays havoc with "Microsoft Direct Push". Switching the phone band causes the data connection to drop, which switches Direct Push off; switching Direct Push back on again loses the more detailed settings I have set in ActiveSync (where I download email manually during work hours but automatically outside of work). In addition, because the data connection is lost, any application that's using it generally has to be shut down and restarted.
Is there some way of moving the phone between "Auto" and "2G only" mode without messing up the Direct Push setting and, if possible, without severing the data connection? While actually in "Auto" mode the phone happily switches between HDSPA and EDGE without any side-effects; so it seems like there ought to be a way to tell the phone "be in Auto mode but for the moment pretend that there is no 3G signal even if there actually is a weak one", and then use that setting in weak 3G areas, switching back to normal "Auto" behaviour when you know the 3G signal has improved. Or alternatively perhaps "Auto" mode could be made to not try to switch to 3G until you get a 3-bar signal, but, once switched, try and stay with 3G until it drops to 1 bar?
The underlying problem here is that the 3G signal in my house is quite weak, but not so weak that it is undetectable. If I leave my TP2's band setting set to "Auto" then it keeps trying to switch into 3G mode, then dropping back to 2G, with a delay every time it does it. (Drains the battery too). So I'd like to be able to quickly switch between 2G and 3G mode. (Obviously I could just leave it set to 2G all the time, but this is a waste when I'm at work or in some other place which actually has a good 3G signal).
My current solution is that I've got a start menu shortcut pointing to CMBandSwitching.exe in the Windows folder. (This is the same program that is launched if you go to the TouchFLO "settings" page, then hit Communications/Phone/Band). In here I can change the Network setting between "Auto", "GSM" and "WCDMA" which has the effect of turning 3G on and off.
But... there are horrible side-effects. Switching in this way causes the current data connection to get messed up, so that nothing can actually use it to access the Internet. Web browsers stop working, and I can't receive email. I've tried switching the data connection off and back on in Communications Manager, and this works sometimes; but even when it does, it messes up my ActiveSync schedule settings. And usually I simply can't get the data connection to turn back on. More often than not, when I change the Band setting I end up having to hit the reset button to get everything functioning normally again.
There must surely be a way of turning 3G on and off without disrupting the data connection and ActiveSync settings and requiring a reboot? The phone itself can do this in "Auto" mode if I'm moving between areas of good 3G signal and zero 3G signal. Is there perhaps a way to tweak the behaviour of "Auto" mode so that it needs a higher 3G strength signal to switch to 3G? Or is there any way to convince the phone (while in Auto mode) that there isn't really a 3G signal present (even though there is really a weak signal) so that it switches to 2G in a side-effect-free fashion?
(bump)
Hm. 136 views and no reply.
You might check into WMLonglife
http://forum.xda-developers.com/showthread.php?t=478519
I haven't tried it, but it may work for you. It functions more based on what you are doing with the phone as opposed to what bands are available.
mwelch16 said:
You might check into WMLonglife
http://forum.xda-developers.com/showthread.php?t=478519
I haven't tried it, but it may work for you. It functions more based on what you are doing with the phone as opposed to what bands are available.
Click to expand...
Click to collapse
I'll check that out, thanks.
Hi..
Anybody knows how to switch manually to use 2G or 3G only?
Because sometimes when I am on the 3G coverage area, the phone still use the EDGE data connection rather than the 3G/HSDPA data connection. It really annoy me because the speed is slow if I use the EDGE connection.
In my old nokia, it allows me to use the 2G/3G connection only, so I wonder if desire can also do that.
Settings/wireless & networks/mobile networks/network mode. The auto is however set up quite well. The reason you keep finding edge, is that the edge signal might be stronger that the 3G. 3G will always be the preferred option for the phone, but keep in mind that a strong signal on edge will beat a poor signal on 3G where download speed is concerned. Therefor your phone tends to pick the fastest/strongest signal in your area.
Hey yall, I've got a bit of a problem with cell standby and I know it's a reception issue, hopefully you guys can help me.
You see, I live in one of the outermost neighborhoods in Jerusalem in a big building made out of thick bricks and cement...as one could imagine, reception is really bad.
My problem stems from the fact that the only way I can get 3G service is by sticking my phone right at the window and forcing it to 3G by hitting WCDMA Only in the *#*#4636#*#* menu. then I just tether to my laptop and everything is all good. After I take it off the windowsill, once it is more than a foot away, I lose all service. I forget to put it back to WCDMA preffered and it just looks for 3G all day in my pocket and I get a battery drain.
anyway I guess my question is this... is there a program or setting I can use to force it to 3g when it knows there is a 3G connection possible? WCDMA Preferred doesn't work because the EDGE network overpowers the 3G network and it would never connect unless I completely disable EDGE.
TL;DR Is there a way to make the radio default to EDGE when it is completly impossible to find any trace of 3G?
Menu > Settings > Wireless & networks > Mobile Networks > Use only 2G networks
That will force your phone to use only EDGE and will put less drain on your battery when it comes to cell network.
Personally, I would move out of jeruselum and go to a place that pumps out 4g. Or at least theoretical 4g. (Hspa+)
Sent from my G2 CM6.1.1, OC'd to 1.5ghz, using XDA App
Yeah...this june. I am going back to memphis TN with full tmo 4g....I am only here for a year
Sent from my HTC Vision using XDA App
rhodes588 said:
Menu > Settings > Wireless & networks > Mobile Networks > Use only 2G networks
That will force your phone to use only EDGE and will put less drain on your battery when it comes to cell network.
Click to expand...
Click to collapse
I always do that when I don't need a fast data connection, I have a widget to switch back quick when I need to do some surfing or tethering
Hello folks!
okay, the facts are: Im in very good 3g reception zone, MIUI 1.6.6 with default kernel, .08 radio, data on, wifi off.
Problem is poor battery life when 3G is enabled. Also, when using mobile data the H icon appears and data moves in and out, but sometimes the H icon just disappears and i get network error? I've tried numerous radio/kernel/rom combinations.
When i put airplanemode on, the battery consumption is constant 2mA (currentwidget). With 2G networks only, its 3-6mA. When 3G enabled, mostly the consumption is 20-40mA and sometimes like 10 times in day with minute interval of refreshing i get 8mA readigs. Any app to check if there is some syncing going on? I use only beautyful widgets weather widget, which updates itself hourly. And the normal contacts and calendar sync on. Fellow MIUI users have much lower consumption, a mate of mine gets 2-4mA when 3g enabled.
3g mobile network is one the battery killers. The h icon stands for hsdpa. This the fastest network but the network coverage is not that good yet (except for big cities). Switch network to 2g network (mobile off). If you really need mobile network, switch on 3g. Otherwise stay with 2g. There's imho no sense in using 3g without needing/using mobile network.
MatDrOiD said:
3g mobile network is one the battery killers. The h icon stands for hsdpa. This the fastest network but the network coverage is not that good yet (except for big cities). Switch network to 2g network (mobile off). If you really need mobile network, switch on 3g. Otherwise stay with 2g. There's imho no sense in using 3g without needing/using mobile network.
Click to expand...
Click to collapse
I tried using BatteryFu and APNdroid to get rid of my 3G while screen off. But that combination didnt work so well, sometimes it didnt disable my 3g and sometimes it wouldnt reconnect to 3G when unlocked. Any good programs to manage this?
I also wonder, I never cant download anything when 3G icon is appearing in statusbar. Its normally 3G but when I want to use the internet, it changes to H. Why cant I use the 3G network then? Im also having problems when the H goes to 3G the internet connection is lost. For example in market i get network error. The H wont stay there if there is no traffic for few secs.
Configured apn correctly? If you are not sure, do it again. Furthermore, you could try these settings for mobile network:
Uncheck data enabled and set network to 2g/gsm (depending on what you have). When you need mobile network, switch to "wcmda + gsm (automatically)" (name could be a litte different, translated it from germany) and check data enabled. I do it so and it's working fine.
MatDrOiD said:
Configured apn correctly? If you are not sure, do it again. Furthermore, you could try these settings for mobile network:
Uncheck data enabled and set network to 2g/gms (depending on what you have). When you need mobile network, switch to "wcmda + gsm (automatically)" (name could be a litte different, translated it from germany) and check data enabled. I do it so and it's working fine.
Click to expand...
Click to collapse
Okay didnt understand very well what u ment by the last part of ur message
APN configured correctly? I have carrier default APN settings which have been working just fine for a year. If u ment APNdroid i didnt do much configuring with it. Gotta give it another try.
Last idea: flash latest radio.
No warranty for any damage.