Related
Ever since I updated to the last OTA I have lost clockworks recovery image. Thus now I am unable to install the latest froyo rom.
I have tried to install the latest clockworks recovery image and Amon_Ra recovery through Rom Manager. Each time it states it is installed but everytime I try to boot up to the recovery image it gives me the following error:
E: Can't open /cache/recovery/command
and it just gives me the Android System Recover <2e>
Any help would be appreciated....
It sounds like you are not rooted.
If you accepted the OTA from Sprint using your system update on your phone, you are no longer rooted and will not have a custom recovery/root permissions. You will be unable to flash any custom recovery/ROMS/delete any sprint apps/Other Root only things until someone comes up with a way to root 2.2.
Have a drink in hopes that a dev will come up with a way to Root 2.2 soon!
I didnt update over the phone
What happened is I installed a rooted verson of 1.47.651.1 but in doing that it got rid of the recovery image... it definetly a rooter version because i can run apps that require root.. such as wife tether titanium back etc...
any other suggestions...
coolguycarlos said:
I didnt update over the phone
What happened is I installed a rooted verson of 1.47.651.1 but in doing that it got rid of the recovery image... it definetly a rooter version because i can run apps that require root.. such as wife tether titanium back etc...
any other suggestions...
Click to expand...
Click to collapse
there's an update.zip around here somewhere that will allow you to boot into an early form of clockwork recovery.
so, assuming that you goofed something, but still have nand unlocked....
find that update.zip. put it and a .zip for a real recovery onto your sdcard. boot into hboot, let it run the update.zip, that will take you to koush's early clockwork recovery. use that recovery to flash a solid recovery.
done.
alternative method would be to use fastboot to erase the recovery partition, then put a new recovery in.
Here is the update.zip...Just extract Recovery.zip....Do this OR/AND what the Senior Member above said and you should be good
timothydonohue said:
there's an update.zip around here somewhere that will allow you to boot into an early form of clockwork recovery.
so, assuming that you goofed something, but still have nand unlocked....
find that update.zip. put it and a .zip for a real recovery onto your sdcard. boot into hboot, let it run the update.zip, that will take you to koush's early clockwork recovery. use that recovery to flash a solid recovery.
done.
alternative method would be to use fastboot to erase the recovery partition, then put a new recovery in.
Click to expand...
Click to collapse
I actually tried the update.zip one already and it doesnt install... it will stated that the signature cant be verified and it will about the installation... havent tried the fastboot approach... I guess I will need to find out how to do that now
so from the looks of it I am screwed... I have hboot .79 if that matters and from the looks of it the rooted rom i installed screwed up my nand unlock.. which is why i think i can install any recovery images... i tried alot of the nand unlock tutorials and most of them I eventually get to a point were i need to write to /data and i cant because permissions are denied... great... oh well i'll keep on trying... any suggestions are appreciated...
If you still have super user, try this...same thing happend to me.
http://forum.xda-developers.com/showthread.php?t=744621&page=4
I'm having a very similar problem also. My Hboot is 0.79.000 too & after trying clockworkmod recovery, a few RUU update attempts, and attempting to change ROMs completely (not in that order) I'm at a loss, no success anywhere. I can't even get in to recovery anymore. It just reverts back to Bootloader menu where my options are Reboot, Reboot Bootloader, or Power down (& I think there is one other option that i tried and sent me back to the aforementioned screen). However, I can still load my pre-existing ROM...
Does anyone have any ideas if there is anything I can do?
TIA
topdawgn8 said:
If you still have super user, try this...same thing happend to me.
http://forum.xda-developers.com/showthread.php?t=744621&page=4
Click to expand...
Click to collapse
I have a question bout this... I seen this before but the sdk that I downloaded for Windows 7 does not have the Su command... any ideas on how I can get it for Windows 7?
Sent from my PC36100 using XDA App
Nevermind I got the Su command to work
Sent from my PC36100 using XDA App
you can erase recovery from rom manager and try to reflash. i would recommend reinstalling rom manager just to make sure it installed correctly. it installed bad on me once and corrupted my recovery trying to update it, reinstalled and installed an old recovery then the newest one and it worked.
Thanks for the suggestions all. I followed the instructions from link you posted using terminal emulator. No such luck, still reading HBOOT 0.79.0000 and running same ROM.
I also tried reinstalling (several times) clockworkmod recovery images and it effects nothing.
Should I try to completely unroot my phone again? If the images i just flashed didn't do it what will?
Im totally at a loss here. ARG!
hit there jtwonbly.......are you also running the stock rooted 1.47.651.1?
Build number 1.47.651.1 CL195459 release-keys
yea same here......and what is it that your trying to do...go back to stock ROM?
I'd like to go to any other ROM. Its as if I'm no longer rooted anymore.
I think I may try to start all over again using NeckFaces old tutorial on unlocking NAND w/o adb. I'm just not sure if that will fix the HBOOT file because I can't get in to Recovery.
OK Guys thanks for all your help but I have been able to get it fixed now!!!
I pretty much had to redo all of Toast Root tutorial and NAND unlock to get it working. Both Part 1 and Part 2 even though I was already running a rooted rom.
The original problem I had is I kept getting told to just try the nand unlock in part 2 but the phone wasnt having it. It wouldnt like the engineering build of the pc36img.zip
So I started from Part 1. Downloaded the rooted rom pc36img.zip and what do you know it finally let me install it. By the time I was done with both parts 1 and 2 I was able to flash a recovery image, get back to hboot .76 and I am now another proud owner of an Evo running a rooted Froyo!!!!
Okay. I've search around and haven't found anything yet.
I recently got a new evo and rooted with the Unrevoked 3.0 beta RC2 yesterday. All was going well until I tried to upgrade to the CM 6.1.2 this morning. Google apps wasn't installed so I flashed the zip which put me in to a boot loop with Clockwork.
It was giving me an error when I tried to restore the backup. I tried to flash pc36img.zip and now whenever I go into recovery I am in RA-evo-v1.8 which I am unfamiliar with. I've tried installing other ROMs via this recovery but the prcess is aborted each time.
Any help would be more than appreciated. I am literally stuck.
fisheric1 said:
Okay. I've search around and haven't found anything yet.
I recently got a new evo and rooted with the Unrevoked 3.0 beta RC2 yesterday. All was going well until I tried to upgrade to the CM 6.1.2 this morning. Google apps wasn't installed so I flashed the zip which put me in to a boot loop with Clockwork.
It was giving me an error when I tried to restore the backup. I tried to flash pc36img.zip and now whenever I go into recovery I am in RA-evo-v1.8 which I am unfamiliar with. I've tried installing other ROMs via this recovery but the prcess is aborted each time.
Any help would be more than appreciated. I am literally stuck.
Click to expand...
Click to collapse
Need any and all information about your phone. I also notice that you are new. The dev section isnt for Q/A there is an entire section dedicated to solving these issues. Please remember that next time. Keeps things cleaner. So please gather anything you can about your phone. Method, Hboot, Version, Radio, Anything that can help anyone here identify something.
Do you have the rom in the root of the usb card? If so try full data wipe and installing the room see if it boots up.
Thanks for the quick reply. Will remember. Desperation has gotten the better of me. I will move over to Q/A if you prefer.
HBOOT-2.10 0001
RADIO - 2.15
Initially rooted via Unrevoked 3 beta RC2 yesterday.
if your able to boot up into a rom download Rom manager and select flash clockworkMod recovery or flash alternate recovery thats prob gonna be the easiest fastest fix (considering it works)
T3hPWN said:
if your able to boot up into a rom download Rom manager and select flash clockworkMod recovery or flash alternate recovery thats prob gonna be the easiest fastest fix (considering it works)
Click to expand...
Click to collapse
I agree with this method... the best way to determine the recovery to use would be to go into the terminal and type
Code:
cat /proc/mtd
if you see "400000" then you need to get the clockwork v3.0.0.2 that supports this phone partion layout. If you see "20000" then you should get amon_ra 1,8 from here:
http://forum.xda-developers.com/showthread.php?t=705026
The information I gathered was from this post:
http://forum.xda-developers.com/showthread.php?t=894331
Making sure you have the correct recovery is the first step. Once that is done create a nandroid and save it somewhere to ensure that the wimax partition is saved.
You have to flash the modified version of Amon_ra found in Zikronix thread. You can find my thread that points to it or just search for hboot 2.10 and follow the instructions in that rooting thread. It seems you're already rooted so just flashing the recovery is probably all you will need.
I haven't used unrevoked, and I know there are several versions. But I have seen others who have used unrevoked and couldn't flash anything bc evidently the method they used to root didn't install the flash_image file on their phone.
I know that installing flash_image fixed being able to flash for some people who rooted with unrevoked.
This issue came up and I was able to help some people, if you check near the end of fastRX8 thread. But I was only able help point the right direction, they figured out the rest of the way. The OP there has the flash_image file and tells you what terminal commands to install it.
I don't know how for you to check if you gave it or not, as I can see mine on sd card cuz I put it there when I rooted.
Beyond this suggestion, lithid can probably help much better than I.
But def post your hardware version, root method, and hboot version (you see that when you go into bootloader and read the top line.
Sent from my PC36100 using XDA App
Wow, sorry, theres been several posts since I started tying. Looks like these guys got it for ya
Sent from my PC36100 using XDA App
Was there a resolution for your problem? If so please post so anyone searching in the future can resolve there problem quickly.
you should flash the pc36img.zip located at the bottom of zikronix's root thread. good luck. just put it on the root of ur sdcard named as pc36img.zip and boot into bootloader. accept the update, and say no to the reboot. then pick recovery, and flash a rom. you need to stay with this recovery if it works for you.
dkdude36 said:
you should flash the pc36img.zip located at the bottom of zikronix's root thread. good luck. just put it on the root of ur sdcard named as pc36img.zip and boot into bootloader. accept the update, and say no to the reboot. then pick recovery, and flash a rom. you need to stay with this recovery if it works for you.
Click to expand...
Click to collapse
You mean the modified amon ra recovery image?
exactly...
dkdude36 said:
exactly...
Click to expand...
Click to collapse
Ya it worked for someone else in the Amon_Ra Clockwork thread here is the link.
zikronix said:
==========================================
FIX BROKEN RECOVERY
This is really only needed if you rooted with one of the previos guides version 6 or lower or if you installed a different recovery like I told you not to.
1) Download File PC36IMG_Recovery.zip and Rename to PC36IMG.zip.
copy to the root of your SDCard and power off phone
2) Power your phone back on into the boot loader by holding power and vol-down until your presented with a white screen. It will read the pc36img.zip and as you if you want to flash. Say yes. Then it will ask if you want to reboot, VOL+UP for yes.
3) If your rom gets tossed in the process. Reboot your phone into bootloader select recovery, and reflash your rom....DONE
Click to expand...
Click to collapse
OP flash the PC36IMG in the bootloader to load this new recovery, then you can go into your new recovery and flash a new rom.
i just rooted my evo with the unrevoked beta.hboot 2.02 it installed clockwork and through that i switchted to the aman ra after that i did a nand backup, powered off my phone and when i turned it back on it was stuck in the bootloader loop. the only thing that eventually worked was installing the sprintlovers pc36img. that got my phone working again. just tried to nand backup again and the same thing happened. does this mean that i need to flash that broken recovery?
defjef123 said:
i just rooted my evo with the unrevoked beta.hboot 2.02 it installed clockwork and through that i switchted to the aman ra after that i did a nand backup, powered off my phone and when i turned it back on it was stuck in the bootloader loop. the only thing that eventually worked was installing the sprintlovers pc36img. that got my phone working again. just tried to nand backup again and the same thing happened. does this mean that i need to flash that broken recovery?
Click to expand...
Click to collapse
Were you restoring a backup or did you stuck on loop on a new rom flash?
i wasnt even trying to flash a rom yet. i was doing the very first nand backup so i could check some roms out. after the backup was complete it gave the option to power off so i did and when i turned my phone back on it was in the bootloader loop. so i went back to recovery, wiped everything, restored nand and i said it restored but when i rebooted it was back in the bootloader loop.so i just search around trying to get help but couldnt find much so i put sprintlovers since it boots up right when you turn your phone on. now it wouldnt even nand backup it said some error and was in the bootloader loop again so i just reinstalled sprintlovers, again
Try downloading an actual rom in zip format (not sprintlovers pc36img) and see if you can flash a new rom fresh. Make sure to wipe everything.
Try using Caulkings format all zip in recovery to wipe your caches.
http://www.mediafire.com/file/ikylelx99c49133/Calkulin's_FORMAT_ALL.zip
put in on my sd card turned my phone off to go into recovery and now my phone wont even turn on
it came on now. gonna try to wipe and flash that rom
Hi!
I bought a Desire HD a week ago and today I decided to try one of the custom roms. I rooted it with Visionary+, turned s-off with the one-click tool found in another thread, installed Rom Manager and Clockwork mod and then flashed it with a custom rom from the recovery/boot screen without wiping anything.
The problem is, when I later tried to install another rom, it wouldn't boot, it's stuck on the HTC boot screen. I've tried reflashing it, wiping everything there is to wipe and I even tried RUU but it won't recognize the phone. Can anyone help me how to restore to the normal stock rom?! I can bring up the Clockworkmod recovery menu if I take out the battery and put it back in.
I would be very grateful if someone could help me with this! Consider that I'm a noob though so try to write the instructions as simply as possible
Hi, I'm basically in the same boat (I take it you tried one of the stable CM6 builds?).
Digged through an awful lot of stuff, found something about downgrading clockwork.
Maybe this'll help you, I'm still having trouble.
I've found an older clockwork recovery image, gathered all the SDK bits and pieces, got my USB drivers set up after even more digging - now this:
D:\android-sdk-windows\tools>fastboot boot recovery.img
downloading 'boot.img'... OKAY
booting... FAILED (remote: not allowed)
It's rooted, S-OFF, all that good jazz. Halp. :<
enectrixx said:
Hi!
I bought a Desire HD a week ago and today I decided to try one of the custom roms. I rooted it with Visionary+, turned s-off with the one-click tool found in another thread, installed Rom Manager and Clockwork mod and then flashed it with a custom rom from the recovery/boot screen without wiping anything.
The problem is, when I later tried to install another rom, it wouldn't boot, it's stuck on the HTC boot screen. I've tried reflashing it, wiping everything there is to wipe and I even tried RUU but it won't recognize the phone. Can anyone help me how to restore to the normal stock rom?! I can bring up the Clockworkmod recovery menu if I take out the battery and put it back in.
I would be very grateful if someone could help me with this! Consider that I'm a noob though so try to write the instructions as simply as possible
Click to expand...
Click to collapse
Which version clockwork mod are you using? And what is the ROM you tried to flash?
Sometimes custom ROMs can take 5 minutes to boot...so give it some more time and see if that helps.
Headwoünd said:
Hi, I'm basically in the same boat.
Digged through an awful lot of stuff, found something about downgrading clockwork.
Maybe this'll help you, I'm still having trouble.
I've found an older clockwork recovery image, gathered all the SDK bits and pieces, got my USB drivers set up after even more digging - now this:
D:\android-sdk-windows\tools>fastboot boot recovery.img
downloading 'boot.img'... OKAY
booting--- FAILED (remote: not allowed)
It's rooted, S-OFF, all that good jazz. Halp. :<
Click to expand...
Click to collapse
seems like your pc is not recognizing your phone. And should not you flash the recovery first and then boot?
I did flash the recovery via Rom Manager, which gave me Clockwork Recovery version 3.0.0.5.
Then I had Rom Manager download CM6, it rebooted the phone, phone gets stuck in HTC splash screen.
According to the thread I linked above, I needed to downgrade Clockwork Recovery, hence flashing 2.5.x.x via command prompt.
The drivers are installed correctly, I'm at least sure of that.
Recovering my previously backed up stock ROM won't get me further than the splash screen either, same with wiping everything that can be wiped before that.
Headwoünd said:
I did flash the recovery via Rom Manager, which gave me Clockwork Recovery version 3.0.0.5.
Then I had Rom Manager download CM6, it rebooted the phone, phone gets stuck in HTC splash screen.
According to the thread I linked above, I needed to downgrade Clockwork Recovery, hence flashing 2.5.x.x via command prompt.
The drivers are installed correctly, I'm at least sure of that.
Recovering my previously backed up stock ROM won't get me further than the splash screen either, same with wiping everything that can be wiped before that.
Click to expand...
Click to collapse
Then use ROM manager to downgrade the CWM to 2.x. You can do it under the option "All recoveries" in ROM manager. People are reporting problems with the latest version of CWM. Check if you get the same if you wipe everything and install another custom ROM.
Can't find a way to even get past the first splash screen - only thing I can properly access is the Bootloader.
Same here. When I boot I just see the initial "HTC" logo, nothing else.
I had Mike's Revolution HD ROM installed and working just fine, and then I tried to install another mod, which got me to this situation.
I have CWM 3.0.0.5 and I have a nandroid backup of the working system from before installing the last mod.
I tried recovering the nandroid, which goes smoothly (including the MD5 validation of the backup) but it still doesn't boot afterwards. I wiped the boot, system and data partitions and tried restoring again - same result.
I assume my next step is to flash a new ROM but unfortunately I don't have any ROMs on my SDCARD, so I need a way to push it there. I tried with fastboot but it doesn't recognize a partition called "sdcard". I believe adb should work while I'm in CWM but it just says "error: device not found".
Any suggestions?
sphuyal said:
Which version clockwork mod are you using? And what is the ROM you tried to flash?
Sometimes custom ROMs can take 5 minutes to boot...so give it some more time and see if that helps.
Click to expand...
Click to collapse
Sorry, no idea which version, but it's the default that comes with Rom Manager. I downloaded Rom Manager yesterday so I guess it's the most recent Clockwork mod.
Left it for 15 minutes, still nothing. I used Android Revolution HD 2.0.11 for the first flash which worked and then when I tried to install Pays-ROM HD Sparta 1.0 I got stuck on the boot screen. I've tried recovering from the previous backup I made on the recovery screen with no result.
Just got mine back alive
Flashed CWM 2.5.1.3 and restored the nandroid with it.
Spending the last few hours searching the forums my best advice is to avoid 3.0.0.5
Went a different approach - finally figured out that you could mount the sdcard via Clockwork Recovery, threw newest CM7 nightly on there and installed it with Clockwork as well.
CHRIST that was a pain in the ass... and I thought downgrading the stock ROM was annoying.
as a rule i have found out cwm3 is for flashing gingerbread and cwm2 is for froyo
Headwoünd said:
Went a different approach - finally figured out that you could mount the sdcard via Clockwork Recovery, threw newest CM7 nightly on there and installed it with Clockwork as well.
CHRIST that was a pain in the ass... and I thought downgrading the stock ROM was annoying.
Click to expand...
Click to collapse
Thanks for the advice! It worked for my DHD too Except that I, after flashing ut with CM7, restored it to stock with RUU! Thanks to everyone here who tried to help
erank said:
Just got mine back alive
Flashed CWM 2.5.1.3 and restored the nandroid with it.
Spending the last few hours searching the forums my best advice is to avoid 3.0.0.5
Click to expand...
Click to collapse
how do I get 2.5.1.3 onto the device when I can't even get the darn thing to load?
encrypshun said:
how do I get 2.5.1.3 onto the device when I can't even get the darn thing to load?
Click to expand...
Click to collapse
Read here: http://forum.xda-developers.com/showthread.php?t=855490&page=132 (jump to page 132 #1312)...
Take your battery off, then put it back in. Hold power button and volume down button at the same time. You come to recovery...or alternately you can use adb.
sphuyal said:
Read here: http://forum.xda-developers.com/showthread.php?t=855490&page=132 (jump to page 132 #1312)...
Take your battery off, then put it back in. Hold power button and volume down button at the same time. You come to recovery...or alternately you can use adb.
Click to expand...
Click to collapse
mate you're a STAR. I actually downloaded a recovery image (from post 1315) in the same thread but it kept saying "connecting to device". When I downloaded the recovery image from 1312 and ran "fastboot flash recovery recovery.img" it say's
sending recovery ... OK
writing recover ... OKAY
What do I do next? Just reboot the device?
oh mother looks like I got somewhere. I did a format device and it went into the CWM 2.3.XX screen as below, reloaded Cyanogen 6.1.3 and boom I'm in. Man I though the device was a goner....I'm almost feeling brave enough to install Cyanogen 7.X
encrypshun said:
oh mother looks like I got somewhere. I did a format device and it went into the CWM 2.3.XX screen as below, reloaded Cyanogen 6.1 and boom I'm in. Man I though the device was a goner....
Click to expand...
Click to collapse
So you are happy with your device now?
Well not really, I went back to HTC Sense because Internet Pass Through wasn't available on Cyanogen and now I cannot get the phone to login and create my google account no matter what
Headwoünd said:
Can't find a way to even get past the first splash screen - only thing I can properly access is the Bootloader.
Click to expand...
Click to collapse
the REMOTE NOT ALLOWED error means you only have radio s-off, so you cannot issue fastboot commands to your device.
I rooted my Desire using Unrevoked3 which flashed ClockworkMod to my phone. I tried and then failed to make a Nandroid backup. Looking at the error messages I realised that I have a PVT4 / erase size 40,000 model.
So I tried Unrevoked again and tried to flash AmonRa's recovery. I've tried it three times but the phone is still on CWM.
I want to play around with some different ROMS but would like to have a backup first.
What is the best way to get the ability to backup the phone? I have Titanium Backup Pro but understand that doesn't backup the Rom? Or should I just kiss the Rom goodbye and start flashing?
no i meet the same probleme and solved by using this one unrevoked 3.21 then i made a nand backup.
start alpharev to S-OFF and then you shoul be able to flash your recovery with fastboot
do a unroot and try to root your device again coz you have PVT4
nixit said:
I rooted my Desire using Unrevoked3 which flashed ClockworkMod to my phone. I tried and then failed to make a Nandroid backup. Looking at the error messages I realised that I have a PVT4 / erase size 40,000 model.
So I tried Unrevoked again and tried to flash AmonRa's recovery. I've tried it three times but the phone is still on CWM.
I want to play around with some different ROMS but would like to have a backup first.
What is the best way to get the ability to backup the phone? I have Titanium Backup Pro but understand that doesn't backup the Rom? Or should I just kiss the Rom goodbye and start flashing?
Click to expand...
Click to collapse
stay on what you have right now if you need a nand backup
i had a similar issue and it was solved by making s-off and then flashing recovery through fastboot "fastboot flash recovery (recovery name).img"
You cant use unrevoked when you are already rooted.
To flash a different recovery, follow this tutorial.
I wouldnt just tell someone to S-Off - there is a chance to brick your phone and unless you really want/need to (flash hboots for example) I wouldnt do it.
Thanks Tillus, this sounds like what I need to do.
So when I followed the instructions to flash_image I get the message that image is not found.
Checking around the place I see that possibly the flash_image command isn't supported in the stock ROM?
Should I use ROM Manager to flash AmonRA?
Hi, you shouldn t try to ash an another recovery while your phones is already rooted and cw on it. As I told I had the same issue. Phone rooted with cmw 2513 but unable to made I nand bkup. I just reload unrevoked which has cmw 2518 and succeed with nand bkup. It s only from that point I started the alpharev hboot. So be caution when using different (cmw or amon ra) recovery. I read lot of ppl bricked their phone doing so.
Sent from my HTC Desire
nixit said:
So when I followed the instructions to flash_image I get the message that image is not found.
Checking around the place I see that possibly the flash_image command isn't supported in the stock ROM?
Should I use ROM Manager to flash AmonRA?
Click to expand...
Click to collapse
No you should not since, it will be a fake recovery... Once the phone rebooted, previous recovery would be there.
sorry for spamming , can't edit from xda app
Sent from my HTC Desire
edit: back to my computer, try with this one unrervoked 3.21 it install cmw 2518 with this one you should be able to nand bkup
fragargon is right, with your PVT4 Desire only certain recoveries work, they are AmonRa 2.0.1 and CWM 2.5.1.8.
There can be problems using unrevoked once you have applied it once and then try to use it a second time to flash a different recovery. Look for an apk called zysploit, uninstall this and try unrevoked again. If that doesn't work, then use fastboot (which is the easiest way to flash a recovery).
I have the same model, and got there in the end
| AmonRa 2.0.1 | PVT4 40000 S-Off Alpharev 1.8| HBoot 0.93.1000 | Radio 5.17.05.08 | LeeDroid 3.0.2 (A2SD) | HTC Desire A8181 | UOT Kitchen Mods |
Great! I unistalled zysploit, then used unrervoked 3.21 to flash AmonRa 2.0.1. And it worked.
I now have a Nandroid backup and so I can embark on my new ROM journey. Thank you ghalalb and fragargon!
Hey good to read this... Have fun
Sent from my HTC Desire
Hello friendly xda people!
I am tryng to unroot my evo because it's giving me some problems, I will hopefully be sending it back on monday. I have tried to use clockwork mod and amon ra recovery to flash the unrevoked forever s-on.zip file. My phone keeps telling me installation aborted. Is there an new s-on tool? or am I missing something? I followed the instructions in the un-root the evo forum of the development section.
Try it again, make sure you have the 2.15....11.19 radio, then try again. Also re download the s on tool, as it may be corrupt.
This epic reply brought to you by none other than my roxx'd out Evo.
How did you root your Evo? Unrevoked? Revolution? The unroot process is not the same for these two methods.
I used unrevoked almost right after I got my evo in November of last year.
I will check my radio and see if that is the problem.
is radio the same as baseband version?
baseband version says
2.15.00.05.02
kmtz3 said:
is radio the same as baseband version?
baseband version says
2.15.00.05.02
Click to expand...
Click to collapse
There is no way around it. To flash S-ON, you have to downgrade your baseband (radio) because 2.15.00.05.02 has been patched to not accept unrevoked.
You can go to
http://www.mediafire.com/?2pjq2dhjv6ntxnh
and download the 2.15.00.11.19 radio. Place on the root of your SD card and flash from your recovery.
ALSO, IT IS VERY IMPORTANT DURING A RADIO FLASH TO NOT PULL THE BATTERY IF THE PHONE APPEARS TO STICK, OR IT IS A SURE WAY TO BRICK IT. JUST LET THE PROGRAM DO ITS THING AND FINISH.
gotcha! thank you so much! I will try it in a bit, my bubble bath is waiting for me!! When I do it I will let cha' know how it goes!
so I successfully flashed the radio and the s-on tool and when I was getting ready to mount the sd card. it would not mount through amon ra, It kept telling me sd card busy, so I rebooted. Now I have s-on and still have the superuser app. I was not able to flash the pcimg through hboot. Did I mess it up?
kmtz3 said:
so I successfully flashed the radio and the s-on tool and when I was getting ready to mount the sd card. it would not mount through amon ra, It kept telling me sd card busy, so I rebooted. Now I have s-on and still have the superuser app. I was not able to flash the pcimg through hboot. Did I mess it up?
Click to expand...
Click to collapse
You have the radio s-on.
You're trying to unroot so now the last step is to download this:
http://www.megaupload.com/?d=VSFLE9CD
Rename it PC36IMG.zip. [Make sure it's NOT PC36IMG.zip.zip]
Boot into the bootloader and accept the update.
Ta-da. You're unrooted.
Never mind, I got it! It's done! Thank you son much to you 3 generous people that posted an answer to my question!
oops I mean 4! Thank you bunches!
I am having the same problem, looks like the s-on tool wasn't being flashed because of my radio...is it safe to flash the radio through ROM manager with Amon RA or Clockworkmod recovery? (broken power button)
Deadbolt said:
I am having the same problem, looks like the s-on tool wasn't being flashed because of my radio...is it safe to flash the radio through ROM manager with Amon RA or Clockworkmod recovery? (broken power button)
Click to expand...
Click to collapse
Is it safe? Sure. It just restarts and auto flashes for you.
I am having a real hard time getting anything to work or flash. I tried flashing the radio through ROM manager using clockworkmod and it scrolls real fast and reboots and see the radio is the same...i use Amon Ra recovery and it says..
Build: RA-Supersonic-v2.3
Finding update package...
Opening update package...
Installing update...
Extracting radio image...
And then it just stops and gives me the option to reboot, USB-MS toggle, backup/restore, etc as if it's done. It did it all super fast and didn't say that installation was complete or anything. What am I doing wrong?