I managed to get working the Microbes LiveWallpaper from Nexus S's dump. Deodexed. Works on Froyo 2.2.1 FRG83, a bit laggy but no FCs at all. Update unsigned because I dont know
Screenshot:
Link: Microbes LWP
I posted first at Nexus One forum. Now Tested by Arkanius and works on SGS
Any feedback would be appreciated. Thanks. I want to know if this works on this device.
Works fine here. A bit laggy like you said but no problems at all, and it's very colourful and wicked on our SAMOLED
i9000 with Stock JPO
Thanks for the feedback!
Had to flash it twice before it worked, but it's running fine here. Stock-ish JPU
NOW APK Version to install normally, no update.zip required anymore
Microbes.apk
santiemanuel said:
NOW APK Version to install normally, no update.zip required anymore
Microbes.apk
Click to expand...
Click to collapse
unable to parse apk file, 2.2.1 jpu here
Same here - parsing error
JPU
Same error here with JPA.
This LWP works better on my ROM...but using it i see a little lag when i use LauncherPro.
hi,
apk parsing error and LWP works but all microbes are in the lower left corner :-/
XXJPU rom
Uninstall and try this version.
santiemanuel said:
Uninstall and try this version.
Click to expand...
Click to collapse
This apk works perfectly with UGJK4 on my Bell i9000M
thx but i can't install it "not installed"
i deleted all *microbes* files to clean the update.zip installation
Did you reboot after deleting apk and lib files?
ok sorry, installed sucessfully now, but microbes stay in lower left corner like the first apk.
Empereur78 said:
hi,
"...LWP works but all microbes are in the lower left corner"
Click to expand...
Click to collapse
Same thing happens to me. SGS XXJPU with the latest .apk.
The previous .apk didnt install but this one did.
Maybe need some tweaks for SGS. I dont own one. But who has it correctly working using the update?
onaquest said:
This apk works perfectly with UGJK4 on my Bell i9000M
Click to expand...
Click to collapse
same here on uhjk3
Strange thing is that in the preview the lwp works fine, but once applied, all microbes stay on the lower left and there is like a mist on the lower/center left side of the screen as well.
The update.zip didn't work.
Related
hey folks .
Here are some AOSP apk´s files that are working FULLY on the Galaxy S for Eclair (2.1) and Froyo (2.2).
I had tested only ECLAIR apk´s !
_______________________________________________________________________________________________________________________________
PLEASE, read this :
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* you point the finger at me for messing up your device, I will laugh at you.
*
* Credits : Cyanogen ( I edited it a bit.. )
Click to expand...
Click to collapse
_______________________________________________________________________________________________________________________________
Eclair
Launcher2
Instructions :
Install as a normal apk file . Press home button and choose Launcher.
Weather Widget
Instructions :
Install as a normal apk . Go to your home-screen and then press the MENU BUTTON>Add>Widget>News and Weather > Choose what you want
Android Keyboard
Instructions :
Install as a normal apk file . Go to Settings > Locale And Text > Check Android Keyboard . Go to type anywhere and press on the screen and choose Input Method > Android Keyboard .
Music Player
Instructions :
Install as a normal apk file .
Messaging
Instructions :
Using Root Explorer , go to System>App and delete MMS.apk and MMS.odex . Copy the MMS.apk that you downloaded and enjoy
Calendar
Instructions :
Using Root Explorer , go to System>App and delete Calendar.apk , Calendar.odex , CalendarProvider.apk and CalendarProvider.odex . Copy the Apk´s that you downloaded and enjoy
Desk Clock
Instructions :
Using Root Explorer , Copy the apk that you had downloaded to System>App.
_______________________________________________________________________________________________________________________________
Froyo
Android Keyboard ( thank you hmanxx )
Instructions :
Install as a normal apk file . Go to Settings > Locale And Text > Check Android Keyboard . Go to type anywhere and press on the screen and choose Input Method > Android Keyboard .
Weather Widget ( thank you Senorclean )
Instructions :
Install as a normal apk . Go to your home-screen and then press the MENU BUTTON>Add>Widget>News and Weather > Choose what you want
_______________________________________________________________________________________________________________________________
PM ME :
if somebody find other apk´s that are working on Galaxy S .
if any FROYO apk that is posted here isn´t working on Galaxy S .
Enjoy
Looks wicked mate, i'm gonna try them all now thanks!
EDIT: both Launcher and Widget don't work on JP3... phone vibrates twice and then churns out the 'force close' error, any ideas?
MAMBO04 said:
Looks wicked mate, i'm gonna try them all now thanks!
EDIT: both Launcher and Widget don't work on JP3... phone vibrates twice and then churns out the 'force close' error, any ideas?
Click to expand...
Click to collapse
JP3 is froyo right ?
I forgot do say that it only works on ECLAIR .
Sorry :/
The launcher seems to use ALOT of ram compared other launchers
shaunm1989 said:
The launcher seems to use ALOT of ram compared other launchers
Click to expand...
Click to collapse
this is the google eclair official launcher .
i didn´t modified ANYTHING .
id rather stick to my proLauncher
thank you and hope you can find more apk'z
xfox said:
id rather stick to my proLauncher
thank you and hope you can find more apk'z
Click to expand...
Click to collapse
you're welcome =D
The Nexus one music player works fine on the sgs. I use it all the time.
aditya_t90 said:
The Nexus one music player works fine on the sgs. I use it all the time.
Click to expand...
Click to collapse
can you send me the apk please ?
i tried a lot of music player apk´s but the don´t install --'
EDIT : Found it =D
I'd reallllly like the news and weather widget for froyo.
I'd also love to have stock froyo for the galaxy s, I kind of miss my nexus one...
8steve8 said:
I'd reallllly like the news and weather widget for froyo.
I'd also love to have stock froyo for the galaxy s, I kind of miss my nexus one...
Click to expand...
Click to collapse
I searched a bit and i found that u need to install them at /system/app and it should work =D
PS : I Didn´t try .
Please , post here if it works =D
I can't remember exactly where I found it, IIRC a German forum - but this is a newer build of Genie Widget which works fine in Froyo on the Galaxy S.
Version is 1.2.02 RC2
Enjoy
Senorclean said:
I can't remember exactly where I found it, IIRC a German forum - but this is a newer build of Genie Widget which works fine in Froyo on the Galaxy S.
Version is 1.2.02 RC2
Enjoy
Click to expand...
Click to collapse
this works on JP3, thanks a million.
Senorclean said:
I can't remember exactly where I found it, IIRC a German forum - but this is a newer build of Genie Widget which works fine in Froyo on the Galaxy S.
Version is 1.2.02 RC2
Enjoy
Click to expand...
Click to collapse
Added to fist post with credits to you .
thank you
Senorclean said:
I can't remember exactly where I found it, IIRC a German forum - but this is a newer build of Genie Widget which works fine in Froyo on the Galaxy S.
Version is 1.2.02 RC2
Enjoy
Click to expand...
Click to collapse
I confirm this also works on Eclair and it works much better than v1.1!
Is the keyboard from froyo rom ? I have a Nexus one...what is the exact name for the keyboard app ?
I really like the Android native keyboard..the froyo one is really smart..
OK..I managed to find the AOSP Froyo deodexed Google Keyboard and it is working fine on Galaxy -S Froyo XXJP3 firmware
Google App backup from
http://mirror.kanged.net/gapps/
Froyo FRF91 AOSP Google keyboard
Next Step.
Google Browser-shared the same name as Galaxy-S Samsung Browser..without overwriting ..cant be installed..
Need advice on how to make both browser co-exist.
hmanxx said:
OK..I managed to find the AOSP Froyo deodexed Google Keyboard and it is working fine on Galaxy -S Froyo XXJP3 firmware
Google App backup from
http://mirror.kanged.net/gapps/
Froyo FRF91 AOSP Google keyboard
Next Step.
Google Browser-shared the same name as Galaxy-S Samsung Browser..without overwriting ..cant be installed..
Need advice on how to make both browser co-exist.
Click to expand...
Click to collapse
Thank you .
Added to first post ( with credits ).
hmanxx said:
Is the keyboard from froyo rom ? I have a Nexus one...what is the exact name for the keyboard app ?
I really like the Android native keyboard..the froyo one is really smart..
Click to expand...
Click to collapse
The Froyo version i think it is from a froyo rom
Thanks to hmanxx
marty1976 said:
I confirm this also works on Eclair and it works much better than v1.1!
Click to expand...
Click to collapse
Didn´t work for me on Eclair ;x
Thanks!!!!
i would really like to have the stock dialer,contacts and sms apps. i didn't try to install them yet because i read in some thread that (at least the contacts app) FS's when you just install it. i guess you would also need the various provider packages etc. has anyone tried it yet?
I Just update Galaxy S to Froyo via Reg Hack,but i found the Ocean Waves LiveWallpaper missing, can i install the lovely Ocean Waves LW on froyo ? how?
thanks
Im missing the autum leaves wallpaper any help?
Sent from my GT-I9000 using XDA App
I do not understand why they delete things that have been good?
Any way to get the live wallpaper from 2.1 back?
True, there appears to be a few missing LWPs...
I believe it should be possible to get them back, as I've seen other threads taking LWPs from captivate (or was it vibrant, cant remember) for our i9000. I cbf trying to figure it out atm though.
Yeah it's very strange that they remove good things in new firmwares 0_0
For the Ocean waves wallpaper google this: ocean-waves-415. You can simply download it in the phone memory and than install.
I tried 2-3 other apk but this is the only one working.
Bye from Italy
PS: sorry if I havent posted a direct link but my new account is restricted and i can't post links now.
Newbie
At least the falling leaves wallpaper can be retrieved
look:
http://forum.xda-developers.com/showthread.php?t=775152&page=2
here is the beach LWP. Just install like a reg apk....
the easy way to get livewallpaper with doc 7.6.2
JPA & JPO V7 Base to Medium Package (android developpers)
JPA & JPO V7 Base to Full Package (android developpers)
extract both of them
in fact if you install them they are ignored and nothing is installed, but if you extract and copy the .apk into the /system/app folder they work very well
copy the required apk into system/app
and here you go you have em all, including installation of other livewall papers, like I have purchased Aquarium.
zoubidou said:
the easy way to get livewallpaper with doc 7.6.2
JPA & JPO V7 Base to Medium Package (android developpers)
JPA & JPO V7 Base to Full Package (android developpers)
extract both of them
in fact if you install them they are ignored and nothing is installed, but if you extract and copy the .apk into the /system/app folder they work very well
copy the required apk into system/app
and here you go you have em all, including installation of other livewall papers, like I have purchased Aquarium.
Click to expand...
Click to collapse
how to do it .....i already download and install the developer program ....can u teach me how to do it
Check a few thread above. There is a an apk for that paper.
Sent from my SGH-T959 using XDA App
am kinda a new to this. could u plz tell me how to install it?
thanks.
cmpnetman said:
am kinda a new to this. could u plz tell me how to install it?
thanks.
Click to expand...
Click to collapse
yeah me too ...plss someone .....i already read everything but still cannot work for me .....teach us how to do it step by step .....and what program that we need to download
ocean wave apk
the original ocean wave live wallpaper missing from froyo update
enjoy.
To install, just download it to your phone, and browse to the file using a file manager app like "My Files" (This is preinstalled on your phone!) Or "EStrong File Manager". Open the file. Done.
Hahahh now its work for me now....do you have the autmn leaves fall
galaxy s rokss with tapatalk
Read Page 1 again.
Thanks, but the ocean waves doesn't render over the full size of the screen in landscape mode. Tested with a few different doc ROMs. I feel like a bit of a whiner, but that LWP has actually managed to convert a few iPhone users, looks so cool.
Not surprised. Touchwiz was never meant to have landscape mode.
But for me its ok
galaxy s rokss with tapatalk
flamin_ICE said:
the original ocean wave live wallpaper missing from froyo update
enjoy.
Click to expand...
Click to collapse
Thanks for the download. It works.
I have downloaded other ocean.apk, but i get "Application not installed". strange
hi all,
NOTICE: 20110713 2213HKT
for rom makers:
PLEASE, add a warning or such to let ppl know this is NOT a bugs-free version, and problems may occur. thank you
for users:
as to use this fix:
- u need a deodexed rom
- be sure your /system is mounted as rw (read/write) but no ro (read only) mode
-BACKUP /system/app/Browser.apk (and Browser.odex if any)
-remove /system/app/Browser.apk (and Browser.odex if any)
-copy the new modified Browser.apk to /system/app/ with adb or root explorer and the like (PS just COPY, NO NEED to install the apk!!)
-------------------------------------------------------------------------------
i'm too frustrated with samsung's stock browser since JP6, and the deodexed one from JVQ is totally rubbish. it's sooooo lag that i've to wait for 2 seconds after each scroll
so, after studying some great posts here, i've modded a deodexed JVQ browser with all the lag things disappeared. now it just perform like what used to be, u can scroll from the top to the bottom of the page in xda with 1 single scroll. HOWEVER, i cannot say it's 100% bugs-free
so, USE IT AT YOUR OWN RISKS!! and remember to do BACKUP!
installation (for deodexed rom):
simply remove the existing Browser.apk from /system/app, and put this one there
PS you may notice some strange thing when u start this modded browser for the 1st time like a blank page is shown or cant scroll the page. just reload the page or restart the browser will do
NOTICE to all users:
- this is a one-off mod and it is not supposed to have any further modifications/adjustments
NOTICE to modders/developers:
- if u want to keep this alive or help to maintain this mod, etc, feel free to ask for the trick here
EDIT: forgot to say thank you to those who discussed about this matter here, those who contributed, and the one who deodexed the browser.apk with user agent settings by Eric
EDIT2: oh.. one more thing..... only english is included in the file named "Browser-JVQ-mod.apk, others will be available soon
EDIT3: file named "Browser-JVQ-mod-from-stock-version-all-lang-no-user-agent-setting.apk" does not include user agent settings but included all lang as in the stock version
1st one, thanks!
Seem you removed some effect for made it work, but great work
Thank you ykk_five ..
Works great thanks!
cwc289 said:
Seem you removed some effect for made it work, but great work
Click to expand...
Click to collapse
Can you explain the effects which were removed?
Zoom out to tab feature working?
Scrolling smoothness still intact.
How is the rendering compared to odexed Browser.apk?
Also, will this apk file work for JVP?
Edit: Unsurprisingly, it doesn't work with JVP.
Thanks working so nice
Wow ... works like a charm. Well done!! (Using the Multi Language Browser).
Working good!Thanx!
very nice mate, very nice...
you..you...you....you....you...
_____________________________________
sent from freshest RomKitchen rom
Works great thanks!
Tested shortly 2nd version, reboot was needed (browser was crashing) and so far it's working fine. Great job (Tested un Juwe's 5.1, Talon 0.3.1)
is that it works in a rom jvq odex + tiny mod !!!!!!!!!!!!
Thanks a lot!!
Pinch out for multiple windows doesn´t seem to work for me, can any one check????
I have yet run this through the paces completely, but it seems to be running great so far. Fast as heck and super smooth. I'm in the US using a Captivate on Continuum 6.1 (JVQ based).
Thanks!
mantrajt said:
Thanks a lot!!
Pinch out for multiple windows doesn´t seem to work for me, can any one check????
Click to expand...
Click to collapse
How are other things? Scrolling etc?
Awesome, works great. Thanks!
mantrajt said:
Pinch out for multiple windows doesn´t seem to work for me, can any one check????
Click to expand...
Click to collapse
No pinch out here, too.
Sent from my GT-I9000 using XDA App
With me on Juwe 5.1 it doesn't work. Strange to say the least as I seem to be the only one having problems with it :/
I tried both versions and I did a reboot. Gonna try and do a cache/dalvik wipe.
Pinch out for multiple windows doesn´t seem to work for me, can any one check????
Click to expand...
Click to collapse
No pinch out here, too.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Yeah... I just discovered that too. It does work with a small workaround. After you open the browser, close it and reopen it. It seems to always work for me the second time its opened. Very strange.
TouchWiz Ux form Galaxy S3 To Galaxy S
(Not Rom)
Everything is working
CHANELOG-
Icons(Galaxy S3 Icons)
Lockscreen(Only Sound)
Full S3 UI
For flashing details- GOTO- http://twcgs.blogspot.com/ (My blog)
It is tested and trusted
NOTE- Only for Cynogenmod/AOKP builds(Also works on cm10)
Charge you phone(Galaxy s ) at least 70%
1) Download Touchwiz form Here- http://www.mediafire.com/?07er8t73ifu4sni
2) Flash it in CWM To know how to Install CWM GOTO- http://crrgalaxys.blogspot.com/
3)This Is it
Comments are welcomed :good:
This is the property of- mrmad.net
I have just made some changes.....
Happy Flashing
can you port it for CM10?
snake920 said:
can you port it for CM10?
Click to expand...
Click to collapse
I will try for it i think this can work for cm10 also
wait i can do testing and tell you......:fingers-crossed:
any results for testing touchwiz with CM10 ??
Wait
I will be giving results tomorrow.........:fingers-crossed::highfive:
waiting for UX on CM10
:good:
is this working on gingerbread jw5?
pratyush369 said:
I will be giving results tomorrow.........:fingers-crossed::highfive:
Click to expand...
Click to collapse
ok tomorrow i'll check it out , good luck ,,, thanks
I hope it works on it i'm waiting for this since s3 came out
Will it work on CM10?
I can confirm this won't work on CM10, it won't flash the file and TW5 alone just FC.
Just in case anyone's still wondering.
no please don't even try for Ginger Bread It can brick your phone only for CM
Dark One said:
I can confirm this won't work on CM10, it won't flash the file and TW5 alone just FC.
Just in case anyone's still wondering.
Click to expand...
Click to collapse
Depend on your rom i knew JB is new thing i have to cheak it out but for now you can get the .zip file extracted and can copy all the apps you want and paste it in system/apps and set permissions to rw--rw--rw:good::good::good::good:
Using root explorer.......:victory:
pratyush369 said:
Depend on your rom i knew JB is new thing i have to cheak it out but for now you can get the .zip file extracted and can copy all the apps you want and paste it in system/apps and set permissions to rw--rw--rw:good::good::good::good:
Using root explorer.......:victory:
Click to expand...
Click to collapse
I'll give it another go then, I put the files for tw in manually after it wouldn't flash and it just wouldn't respond when I selected it.
I tested it on CM10, as it comes.
I used TWICS when I was on ICS ROMs, that's why I had to try it on JB.
So!!!!!!!does it work on JB?
Sent from my GT-I9000 using xda premium
Sorry, still not responding. I made a zip including all Iib files and framework, it flashed and booted fine but still won't respond when I select it as a launcher.
this will not work in JB
It was reported that the Touchwiz UX launcher does not work in cm10.
It won't work due to the change in api level.Guess we have to wait for samsung's JB update for S3
driodmaster92 said:
It won't work due to the change in api level.Guess we have to wait for samsung's JB update for S3
Click to expand...
Click to collapse
Bah, I hate waiting for Samsung!
Ah well, I'm getting my S3 today anyway.
Nobody can confirm that this works on CM9?
Is there happens to be a youtube video of this TouchWiz?
I can not find it in any case.
Like to hear it from someone.
-Danny- said:
Nobody can confirm that this works on CM9?
Is there happens to be a youtube video of this TouchWiz?
I can not find it in any case.
Like to hear it from someone.
Click to expand...
Click to collapse
It works perfect on CM9 mate.
When the S III came out I came to enjoy the Photo Wall LWP and have used it ever since but today when I finally upgraded to the new 4.1 leak I found the apk that I have used multiple times wouldn't install it just gave a parse error.
Luckily after a little time I figured out it was not signed, so here is a copy that installs fine on the new JB leak. I just ran it through a app to sign the apk.
How can you change the default to you own gallery?
Sent from my GT-I9100 using XDA Premium HD app
If you mean just using your own pictures normally it is in the settings when you select the LWP.
If you are talking permanently change the apk I don't know.
i want to change the picture to my own, not the default. I try to change the default to pictures but I cannot change the picture just click and nothing happens
shadowofdarkness said:
When the S III came out I came to enjoy the Photo Wall LWP and have used it ever since but today when I finally upgraded to the new 4.1 leak I found the apk that I have used multiple times wouldn't install it just gave a parse error.
Luckily after a little time I figured out it was not signed, so here is a copy that installs fine on the new JB leak. I just ran it through a app to sign the apk.
Click to expand...
Click to collapse
Works great! Thanks!
pulangratz said:
How can you change the default to you own gallery?
Sent from my GT-I9100 using XDA Premium HD app
Click to expand...
Click to collapse
Go to the Photo wall LWP.
Click on settings.
Choose "Select photos"
Choose "Gallery"
Tap on a folder in your gallery.
Then select the pictures you want. (or you can choose the select all options in the upper left corner)
pulangratz said:
i want to change the picture to my own, not the default. I try to change the default to pictures but I cannot change the picture just click and nothing happens
Click to expand...
Click to collapse
Works fine for me. No problems encountered.
just tried to run this on the leaked Jb (Simplistic de-odexed), through CWM (that comes with Philz kernel) and it reported 'installation aborted', so no luck for me. I tried verification off also, that didn't work either. Just reporting my experience. thanks anyway.
xzyk said:
just tried to run this on the leaked Jb (Simplistic de-odexed), through CWM (that comes with Philz kernel) and it reported 'installation aborted', so no luck for me. I tried verification off also, that didn't work either. Just reporting my experience. thanks anyway.
Click to expand...
Click to collapse
You hve to install this. Not flash it.
doh...noob mistake...just renamed it to apk extension and works fine now....
Thanks buddy
Wow its really cool. Thanks.
Working great on new leaked XXLSJ stock rom (deodexed)
root required?
Do I need to be rooted to run this on my tab 7.7?
I can't install it on the S2 it says not installed. .?
Same issue
pulangratz said:
i want to change the picture to my own, not the default. I try to change the default to pictures but I cannot change the picture just click and nothing happens
Click to expand...
Click to collapse
i am having the same issue