Hi guys.
Please, I need a little help. 2 days ago I bought Desire. I rooted it with UnRevoked 3.2.1. I also replaced SD card with a new 8 GB Sandisk. Now, how can I create all pertitions needed (ext3 and fat32)? I put on ROM manager, which does nothing, ie. when I select to create partition of 512 MB, it rebooted, but does nothing. I am Windows XP and Win 7 64 bit user. Can you please tell me how to create all necessary partitions AND neede Cache, ... folders on SD?
Thank you a lot,
Sandi
What exactly did you do with ROM manager?
I would just reboot into recovery (start phone with volume down, wait a few seconds till sd card check is over and select recovery) and go to "mounts and storage" and format sdcard. 512 mb ext2, rest fat32, then upgrade to ext3. Should work this way.
edit: ext partition size varies depending on the rom you flash and if it has data2sd.
Which rom do you want to flash?
There have been, in the past days alone, multiple threads about this. Maybe some searching on your one is a good idea. If that is to complicated i can narrow it down for you with a little hint: GParted
Actually, I thought that it will be this way. But this does nothing, so I am a little lost.
Regards,
Sandi
Ok, I rebooted phone. Having HBOOT 0.93. Going to down to Recovery. I got a ClockWorkMod v2.5.0.7. Going to Mounts and Storage. Then select Format sd-ext. It says: Formatting SDEXT:...
No app2sd artition found. Skipping format of /sd-ext.
So, how to create partition?
Thank you very much, Sandi
ok i thought that clockwork mod recovery was capable of partitioning sd card.
but you can flash amon ra recovery (this is the GSM version):
http://forum.xda-developers.com/showthread.php?t=839621&highlight=amon
have you got s-off? if yes, you can just flash the recovery via fastboot.
if not, you will probably have to do it with unrevoked.
edit: accidently hit the thanks button on your post, dont wonder
I have S-ON now. How can I then use AmonRa .IMG? I have no way to choose to load img file, as only load ZIP and so on are there.
Regards,
Sandi
Well, just start unrevoked and press CTRL + R (or just select file --> custom recovery...
Select the image you downloaded from the amon-ra thread and it should work. Haven't tried it with a custom one yet personally, but these instructions are also mentioned in the amon ra thread:
Amon_RA said:
Install
Unrevoked
http://www.unrevoked.com/recovery/ to flash it.
Be aware that unrevoked flashes an Superuser app... so any issues related to su use are out of my control!
[/LIST]
Click to expand...
Click to collapse
Once done, boot into recovery select "Partition sdcard" and use it to your likings .
Thanks anyway, I just went back to original ROM.
Regards,
Sandi
Of course I wanted to get me some custom ROMS, but it finished badly.
Now I did it
I rooted with Unrevoked. I went without problems. Then I created CD for AlphaRev 1.5, rebooted PC and started process to get S-OFF.
Unfortunatelly, it said after step 3, that procedure didn't finish correctly. My HTC stuck on HTC logo screen, and it throws 2 black lines on it.
I can get to Recovery mode with power+down buttons, but what to do now. It doesn't reboot at all.
I have correct RUU exe file for my HTC, but it is not recognised. Please, any help what to do?
Regards,
Sandi
Related
OK, been screwing with iPhones for YEARS.. (Franlkly, that ****s a cakewalk compared to screwing with android phones)... Anyway, I've inherited an HTC desire that's been rooted with Clockwork 2.something, and a froyo 2.2 rom. I've since updated the hboot to 0.93.0001 FROM .83 or .84 or something... or im TRYING to get the gingervillian rom to function correctly but im having problems with the whole clockwork 3.0 thing. (I cant figure out how to install clockwork to the phone NOT the SD card.. as Im assuming i need clockwork installed to the phone to handle the whole EXT on the SD thing...
(Basically, when i run in a terminal:
su
a2sd cachesd
it returns a "cant mount sd-ext" error...
(this is my biggest problem so far... after that is... HOW THE HELL do i install clockwork to the phone (or upgrade clockwork to the phone) rather than the SD card (yes, i can run the clockwork 3.0 from the sd by entering recovery and "installing" it (which really only runs it) from the sd card (wether it's named update.zip or recovery.img or blahblahblah.zip)...
As im fairly new to the android thing (and for the record.. the android kicks the **** out of every iphone ive ever touched)... can someone PLEASE... point me in the general direction of right?
really? nothing? no one has had a single issue with going to gingervillain? and cant point me in ANY direction? THIS i find difficult to believe...
from what i understand you want to put the latest clockwork recovery onto your phone ????
if so in rom manager click (i not used it for a long time ) the top one syas something like flash clockwork / current clockwork , boot into recovery search for the zip it created and install
or you can get the img file and push it via fastboot
fastboot erase recovery (enter)
fastboot flash recovery clockwork-recovery.img (enter)
^^ thats the commands to push it once you have directed to where it is .. for eg
cd c:\ enter (then direct it to where recovery.img is preferably in tools folder of sdk )
if thats not what you want then thats just some useless info you have gathered .....lol
It's not that difficult your are just mixing up a few words.
Clockwork is a recovery, this way you can flash new roms etc. I think you are using an old tutorial about rooting etc.
1. Download unrevoked to root your device. You can select to install a different recovery in Unrevoked.
2. I would suggest using a different recovery, look for amon-ra in the rom development thread.
3. This error "cant mount sd-ext" means that you don't have an ext3 partition on your SD card. There are a lot of tutorials how to do this, but I think the easiest way is true the amon-ra recovery. (I believe that clockwork also has this option) You have an option to partion your SD card. Make that ext3 partition 512mb or 1gb in size. Set swap for 0. The rest fat32.
4. After you have done this you can type the commands again in the terminal and it will work.
You can skip part 1 and 2 if you want but I suggest that you follow them.
ps the Hboot does not matter anymore which version you have.
OK, so I've gotten a little further. Ive successfully installed Clockwork Mod 3.0.0.5 onto the phone itself (installed via terminal as:
su
flash_ image recovery /sdcard/Clockwork.img
Then did a factory reset of the phone, booted into recovery, formated the sd card with a 1G ext partition, and 128MB swap... the rest as FAT. Then mounted as USB, transfered the Gingervillian 1.5 image to the sd card and installed Gingervillian. Booted into Gingervillian, installed terminal and tried to move the Dalvik cache. TO NO AVAIL...
I still get an error saying that the davlik cache cant be moved.
Additionally, from Clockwork, after formating the SD card, i try to mount sd-ext and it says it cant...
any advice?
OK, apparently it's the SD card I was using (i was attempting to use a 32GB SD card... I swapped back to my 8GB sd card and it seems to work flawlessly.
Any ideas on what would stop the 32gb sd card from taking an ext partition?
(interestingly, google maps crashes when i attempt to a2sd cachesd on the 8gb sd card...)
I didn't need to have an ext 3 partition on my card to use Oxygen and also I didn't update my HBoot from the default.
Using clockwork recovery 2.5.0.7
Just use Rom Manager to install and reboot into clockwork recovery and then from there you should be able to clear the cache and install oxygen with no problems with only a fat32 partition.
So a while back I rooted my desire, and played about with a few roms, then stuck with cyanogen for quite a while. This is the order of a few actions I took which I think may be where the problem occurred.
So from being rooted with cyanogen 7:
I decided to s-off the phone with alpharev
I then put a new splash screen on
Then decided I wanted a new sd card (I was told by a mate it will just go straight in no problems) So I bought an 8gb card stuck it in put my backed up data on the card and booted, all was fine.
I then thought about trying a few new roms that had appeared, and I tried flashing one only for the phone to hang forever on the splash screen.
I've been trying a few things to try to resolve it, stabbing in the dark, such as running unrevoked3 (maybe to root again, only for it to say the firmware is too new) I made my new sd card a gold card, like I did with the original.
None of these helped. has anyone any ideas or know how to sort this out???
What recovery do you have? Which ROM did hang?
Did you do a full wipe?
Does the rom you want to instal require a ext partition?
Sent from my GT-I9100 using XDA Premium App
I wiped the cache, and dalvik cache, even did a factory reset in recovery. Im using clockwork recovery.
I tried InsertCoin_GB_Sense2.1_CM7_v20 and Reflex_S_2.0_LITE_GingerBread_Sense-2.1_GRI40_A2SD+
Maybe these need an ext partition? Would that be it? I'm not sure how to set that up yet.
yes those roms need ext partition, don't know about reflex bu have insertcoin myself, 1GB ext4.
1.go to recovery
2.press on partition sd,choose the size, then after it's finished convert it to ext3 in partition sd again below the option of making one, you can make ext4, but thats up to you. ext3 is needed..
Don't forget to backup your sd, you'll lose everything on it
The ROM you mentioned is an a2sd ROM. So yes, you'll need to partition your SD card if you want to use a a2sd rom.
Sent from my HTC Desire using Tapatalk
Thanks for this I will get on it and let you know
I can't find an option in my clockwork to partition the sd. Just been searching a bit and seen it can be done through rom manager, that rebooted the phone and left me with the ! in a triangle and the small droid on the screen and when I press the power button it is in recovery it says installation aborted. Is there a guide for the Desire? I can't seem to find one....
Sorry found a guide on here. Will try to do it now.
Ok so I am really struggling to get anywhere with a few different guides to partition the card. Through rom manager it also says signature failed, although I have tried toggling the permissions. Major
stevoh84 said:
Ok so I am really struggling to get anywhere with a few different guides to partition the card. Through rom manager it also says signature failed, although I have tried toggling the permissions. Major
Click to expand...
Click to collapse
Steveoh like i told, do it from recovery(easiest), when you rooted you were able to change the recovery(unrEVOked), do so and change it to Ra recovery
Still if you don't want to this program can help youhttp://www.partitionwizard.com/free-partition-manager.html
Download this and do it from you pc, although it's very easy to do from recovery, takes 5,6 minutes mostly waiting..
I have created a partition with the program you recommenced. How will I know that it is ext 3? And that my phone will use it?
found it!
Htc desire bravo
Stock hboot rooted
Latest radio
S-Off ARev
Ext-3 (via ClockworkMod Recov Partition)
I have installed Pyramid Sense3 but on boot I stuck on AlphaRev's initial
'welcome' screen. Possibly it also reboots.
I have wiped and installed oxygen which works fine.
Any suggestions?
check the radio requirements and partition requirements
apart from that it's nothing really obvious so far?
Radio is latest and same with the one required by PyramidMod. Further to that nothing else obvious.
Just hangs in the welcome screen.
Sent from my HTC Desire using XDA App
"In order for this to work you need to use the above hboot (do not forget to check md5!!), if you don't know how to flash it using terminal or cmd, use android flasher or something..."
Did you do that? On the first post...
start a fresh, full wipes, check md5sums...
furthermore, most Sense 3.0 ROMs need an EXT partition on your SD-Card. Have you got that? Some even require specific ways in which the SD-Card is partitioned
BigMrB said:
"In order for this to work you need to use the above hboot (do not forget to check md5!!), if you don't know how to flash it using terminal or cmd, use android flasher or something..."
> I installed through hboot and ClockWorkMod Recov.
I am aware of installing through ie cmd. I will try and read about it.
The funny thing is that I had it installed. Then realised that my radio was old. I installed new radio used as it is for a few days and then decided to flash again.
>> Did you do that? On the first post...
I cant seem to find the first post
start a fresh, full wipes, check md5sums...
Click to expand...
Click to collapse
>> BTW I have not yet understood the process of checking md5sums
Anyways thanks for your help, I dont want to hassle you more. If you have any idea let me know. For now I will do some closer reading and perhaps flash it through cmd as I did with my recovery update etc. Thanks again
---------- Post added at 08:30 PM ---------- Previous post was at 08:29 PM ----------
Htc desire bravo
Stock hboot rooted
Latest radio
S-Off ARev
Ext-3 (via ClockworkMod Recov Partition)
http://lmgtfy.com/?q=Download+MD5+Check+2.1+Free&l=1
MD5 provides a checksum for an arbitary file. It's just a string of characters like a long PIN code.
You can use it to guarantee that the file that's been downloaded is identical to the original, i.e. not corrupted on the way. So for any file that has an associated MD5 sum. You download the file and run a MD5 utility on that file on your system and check the MD5 value output against the original one.
Bootloop - I think you need a diff hboot ....
try flashing another rom, it MAY help
should swap size be zero.
Previously (with old rom) that it worked I had out of no idea had a swap part aswell.
Maybe not.
It shouldn't matter ... most important thing is that fat32 is 1st followed by your ext and swap on the end... I have 32mb swap but I see little difference between that and 0mb swap
Did you ever try installing the hboot from the second post?
It says you have to use it?
Instructions for install:
-Flash hboot
-Reboot into recovery
-You must wipe at least /data and /sd-ext
-Flash ROM
-Reboot and Enjoy (it takes ages on first boot, it has a lot of sutff to do)
Bootloop
Hi everyone. I find this thread most appropriate to post my problem.
I also have a bootloop problem, but mine is persistant.
I had MIUI rom, and after a few weeks decided to change it.
Phone was rooted with unrevoked3, sd card partitioned with gparted, radio 5.17.05.23, hboot 0.93.0001
After that I used AlphaRev CD to s-off.
Then I've flashed PyramidMod007 and it all went downhill from there. Phone just hanged at Joker logo, and I've tried backup (didn't help), reflashing other roms from SD card, and none of them worked.
I finally managed to restore the phone with RUU, and tried the whole process from scratch.
Root, S-OFF, Nand backup, Flash; same story, but this time i can't get it to work at all.
I don't know where to start now, what to do and what the heck am I doing wrong.
After all, I am but a nOOb.
Sorry for long post, and sorry for poor english.
Edit:
Damn thing works again
I pulled that one with PB99IMG.zip to SD again; bootloader and update, and it works like nothing happened :S
But then again, what should I do now. Should I go trough whole process again or what.
Anyone has any idea why is this happening.
What HBOOT do you have and what version are you trying to install?
What EXT size do you have?
There are 2 different versions of roms for stock and cm7 hboots. They have different ext requirements.
Double check that.
Optionally (recommended), you can change Recovery from CWM to Ra Desire or RMD (most recommended) and re partition your SD card. Maybe your version of CWM Recovery is not installing this rom properly (known problem with CWM).
Thanks for reply
hboot is 0.93.0001, and I'm trying to instal stock hboot version of PyramidMod.
EXT is 768MB ext4, ROM requires 512MB.
Problem seems to show up after S-OFF procedure, like there is something incompatible with rom and recovery, it just bootloops. I'll try to install RMD.
Can someone be kind enough and check if i'm doing it right. This is the plan:
Phone is stock now.
1. Root with unrevoked
2. S-OFF with alpharev
3. Sd partitioning with gparted (to 1GB ext4)
4. nand backup
5. flash rom
I think it is best to install RDM recovery and latest radio right after S-OFF procedure, am I right?
I would suspect the partitions or errors in scripts (CWM side fault only).
With RMD you can both repartition SD card witn ext alignment and flash rom as RMD is based on Ra Desire.
Try that.
Usually bootloops have connection with wrong formatting or errors in scripting (CWM side faults only).
Are you doing full wipe before flashing your rom?? Sometimes it's a key to success.
petkovic.nenad said:
Damn thing works again
I pulled that one with PB99IMG.zip to SD again; bootloader and update, and it works like nothing happened :S
Click to expand...
Click to collapse
Hey, sorry to jump in, I'm having a similar problem, what did u do exactly on these steps with the above IMG to make it work?
kl_arnet said:
I would suspect the partitions or errors in scripts (CWM side fault only).
With RMD you can both repartition SD card witn ext alignment and flash rom as RMD is based on Ra Desire.
Try that.
Usually bootloops have connection with wrong formatting or errors in scripting (CWM side faults only).
Are you doing full wipe before flashing your rom?? Sometimes it's a key to success.
Click to expand...
Click to collapse
Yes, full wipe.
I'll try to install RMD, repartition SD from recovery and reflash rom
Is this what you have in mind?
Thanks man
---------- Post added at 12:42 PM ---------- Previous post was at 12:37 PM ----------
patriotspid said:
Hey, sorry to jump in, I'm having a similar problem, what did u do exactly on these steps with the above IMG to make it work?
Click to expand...
Click to collapse
So, you go here and download RUU that suits you most, if you don't know what software your phone came with.
Then, you run downloaded application and don't touch anything, and in temp folder look for rom.zip.
After you've found it copy file to desktop, and just click cancel on installer.
Rename rom.zip in PB99IMG.zip, put it on SD/root.
Go in bootloader menu and wait. After a minute or so, it will ask you do you want to apply/perform update. VolUp for yes, and wait. Make sure battery is good.
It worked for me, and hope it will work for you.
If there is something wrong with this method, I would like senior members to rectify me.
Petcovic,
Yes, flash RMD Recovery through fastboot and use it to partition your SD card.
Choose Ext partition(s) size and fat32 is taking the rest of card automatically.
Ext partitions are properly aligned.
RMD Thread:
http://forum.xda-developers.com/showthread.php?t=1137763
How to flash?
You need to be S-OFF
put recovery.img into the same direcotory as fastboot.
Navigate in CMD to this directory and type:
Code:
fastboot flash recovery recovery.img
RMD supports up to 3 ext partitions.
Partitioning via RMD:
Code:
Partition SD card
Partition SD Card
First ext filesystem <ext4>
First Ext size <your size>
Second ext filesystem <none>
Second Ext size <0>
Third ext filesystem <none>
Third Ext size <0>
Write Configuration
Ignore using recovery to partition ... Use gparted or something you have more control... Did anyone flash the hboot link that it tells you to before flashing? ??
After trawling xda for weeks and reading about every issue under the sun, I'd say that most of the experienced xda members recommend using GParted to partition sd cards rather than other methods. GParted has always worked flawlessly for me.
@MigMrB
That's not very kind of you.
I had never problems with partitions formatting under Ra Desire or RMD.
Gparted is also OK. Just partitioning through those Recovery is optimized for Desire.
Both ways are OK. Even using MiniTool Partition Wizard under Windows is fine as long as you are familiar with partitions requirements layout.
Hi,
Today i have MildWild v. 3.2 and i´m very pleased with it. One thing though is that i can´t understand is how A2SD works. I thought that the A2SD script was automatically working if only the Sd-card was correct formatted. I have two partitions, the first one is 1 GB ext3 and the second and rest is fat32.
The internal memory has now only 16 MB left.
Do I have to run another script to get the A2SD to work or what is it that I´m doing wrong?
All the help I can get is welcome.
// MatNal
was just on mildwild 3.2 (now on 3.5), A2SD should work fine by default.
how did you partition your sd card. gparted or 4EXT recovery are recommended.
FAT32 should be first (on the left), and ext3 or ext4 should be second (on the right), both primary partitions.
keep apps on 'internal', don't 'move to sd' to use the partition. use apps like quick system info pro or diskusage to check if everything's working.
to get even more space you can move dalvik to sd as well, think the zip attached should be compatible.
also are you S-OFF and changed hboot (to cm7r2)? it's not a requirement, but you might as well to use the space more efficiently.
Thanks for the answer.
I used gparted to partition my sd card. On the left was FAT32 and to the right was the ext3, both primary. So far did I do everything correct then.
I´ll try to format the sd card again and do a new rom installation. Wipe data and cache. Anything else I have to do?
I´m S-OFF but I have´t changed my HBOOT. How do I do that and where can I find it? Can I use Rom manager and use it at the same way that the rom is "installed"?
Anything else that i should do to get the phone back in bushiness?
// MatNal
MatNal said:
Thanks for the answer.
I used gparted to partition my sd card. On the left was FAT32 and to the right was the ext3, both primary. So far did I do everything correct then.
I´ll try to format the sd card again and do a new rom installation. Wipe data and cache. Anything else I have to do?
I´m S-OFF but I have´t changed my HBOOT. How do I do that and where can I find it? Can I use Rom manager and use it at the same way that the rom is "installed"?
Anything else that i should do to get the phone back in bushiness?
// MatNal
Click to expand...
Click to collapse
uninstall rom manager first, it's known to cause usb bricks on this phone. you don't need it.
if you are going to repartition your sd, might as well use ext4, should be faster.
you might as well change the hboot before doing a fresh install.
go to alpharev.nl, where you can find hboots. use cm7r2.
it will repartition you internal memory with 145MB system partition, the rom itself has ~110MB system so fits nicely. actual internal memory will go up from stock ~147MB to 287MB
hboot can be flashed one of 3 ways
- fastboot (requires android sdk), commands given on the page
- PB99IMG zipfile, instructions on same page
- android flasher, program which does the same thing (+ other stuff like radios and splash screens)
then reboot into recovery and full wipe fresh install. A2SD should work by default as stated before.
app data and dalvik cache gradually build up on internal the more apps you install. so if you still run out of space, flash the zip i posted earlier (assuming your ext partition is big enough to accommodate apps and dalvik)
okey, thanks!
Some new problems that I did find out this just a few minutes ago. When the phone is off and I press down and power, the first menu gives me the options
fastboot
recovery (which I´v been using several times)
clear storage
simlock
If I now select the recovery menu the HTC screen shows for a second or so and the comes the next menu
bootloader
reboot
reboot bootloader
power down
What happened with the recovery menu? How can I now get to the recovery menu?
MatNal said:
okey, thanks!
Some new problems that I did find out this just a few minutes ago. When the phone is off and I press down and power, the first menu gives me the options
fastboot
recovery (which I´v been using several times)
clear storage
simlock
If I now select the recovery menu the HTC screen shows for a second or so and the comes the next menu
bootloader
reboot
reboot bootloader
power down
What happened with the recovery menu? How can I now get to the recovery menu?
Click to expand...
Click to collapse
dunno if i'm honest, may have got deleted somehow
i recommend 4EXT recovery, download the recovery updater from there, and it can flash a new touch recovery for you.
failing that you can manually flash a recovery image using fastboot commands, or android flasher.
Hello evryone.I got the Desire today and I would very much like to do root on my phone.I'm a total novice about all this and I'd like to ask someone for help.When I go in the boot menu (volume down+power) i have this:
-Revolutionary
BRAVO PVT3 SHIP S-OFF
HBOOT-6.93.1002
MICROP-051d
TOUCH PANEL-SYN0101
RADIO-5.17.05.23
Aug 10 2010
HBOOT
FASTBOOT
RECOVERY
CLEAR STORAGE
SIMLOCK
Can someone suggest where to find a tutorial step by step how to do root on my phone because I'm a total beginner?
Thanks.
Well it looks like all the hard parts have been taken care of already. The rest is a piece of cake
Revolutionary was used to s-off, which probably means that you have a custom recovery install as well.
Use volume down while in the bootloader to scroll down to RECOVERY. Then use power to select it. When the recovery boots up you should have either cwm (clockworkmod) or 4ext recovery installed. Tell me which one you have so that i can give you some more guidance.
I'm afraid that nothing of what you have said I do not have.When I select a recovery nothing happens,On the next screen I see icon of phone on the middle of the screen and two circular arrow.One point down and another point up,and then red tringle with an exclamation point in the middle.I tried several times and always the same.Is this serious problem?
talicni67 said:
I'm afraid that nothing of what you have said I do not have.When I select a recovery nothing happens,On the next screen I see icon of phone on the middle of the screen and two circular arrow.One point down and another point up,and then red tringle with an exclamation point in the middle.I tried several times and always the same.Is this serious problem?
Click to expand...
Click to collapse
Then you need to flash a recovery. Either through fastboot, or through the PB99img method.
Fastboot implies installing fastboot, adb and hboot drivers on your PC, downloading the recovery.img, and then using the command "fastboot flash recovery recovery.img".
The PB99IMG.zip is a bit easier. Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=1751258
abaaaabbbb63 said:
Then you need to flash a recovery. Either through fastboot, or through the PB99img method.
Fastboot implies installing fastboot, adb and hboot drivers on your PC, downloading the recovery.img, and then using the command "fastboot flash recovery.img".
The PB99IMG.zip is a bit easier. Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=1751258
Click to expand...
Click to collapse
Small correction there buddy, the command is
fastboot flash recovery recovery.img
jmcclue said:
Small correction there buddy, the command is
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Oops. Bah, I have been away for too long. Thanks
Thank you so much for the help.I've been busy these days so I have not had a chance to try what you suggested, but I will try tomorrow.f I understand correctly, I put PB99IMG.zip on the SD card,then go to bootloader menu(volume down+power) and run PB99IMG.zip.Then ask me if I want to update recovery, volume up for YES.When asko me if I want to reboot choose NO.Once its finished I have 4ext recovery and use volume buttons to navigate to recovery then press power button to enter recovery.And then what I have to do next?
You wrote to type this command
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
but I do not know where and when I need to write.
talicni67 said:
Thank you so much for the help.I've been busy these days so I have not had a chance to try what you suggested, but I will try tomorrow.f I understand correctly, I put PB99IMG.zip on the SD card,then go to bootloader menu(volume down+power) and run PB99IMG.zip.Then ask me if I want to update recovery, volume up for YES.When asko me if I want to reboot choose NO.Once its finished I have 4ext recovery and use volume buttons to navigate to recovery then press power button to enter recovery.And then what I have to do next?
You wrote to type this command but I do not know where and when I need to write.
Click to expand...
Click to collapse
Yep, thats pretty much correct. You go into the bootloader, wait a couple seconds and it should find the PB99IMG.zip that you placed on the root of your sdcard automatically. Then you press volume up to confirm the install, and then reboot. Go back into the bootloader and select recovery and you should now have 4ext recovery.
Forget about the fastboot command. That is just another method of installing 4ext, but its a bit more work. Since youre using the PB99IMG method you dont have to do this.
Once youre in recovery you have a few options:
Boring option- You can simply flash a root zip which will give you root access on the stock rom
Fun option- You can pick out a custom rom from the development section and flash it. Custom roms come prerooted, and have so many other advantages over stock. (Performance, a2sd for gaining more space for apps, battery life, customization, etc.)
Thanks for the help.Can you recommend a good rom that will not slow down the phone?I read some posts that the Desire is weak to be launched ICS rom, and that the version 2.3.7 is best for Desire.Is this true or not?
talicni67 said:
Thanks for the help.Can you recommend a good rom that will not slow down the phone?I read some posts that the Desire is weak to be launched ICS rom, and that the version 2.3.7 is best for Desire.Is this true or not?
Click to expand...
Click to collapse
Well anything over android 4+ wont run ideally on the desire.
My favorite stable rom is milwild's redux. You need to do a couple things before flashing to optimize your space usage. First create a 1GB ext4 partition using this guide. Then go here and download the PB99IMG_oxygenr2 zip. This is an hboot and will change the layout of the internal partition to maximize the amount of space for apps and app data. After youve downloaded it, rename it to PB99IMG.zip, and put it on the root of your sdcard. Then you go into the bootloader and install it the same way you did for 4ext. After that you go into 4ext, go to the wipe menu and choose "format all partitions (except sdcard)". Finally go to install zip from sdcard, select the rom i recommended above and flash it.
I have to admit that Gparted method for partitioning sd card somehow easiest for me.Again I have a few questions before I start my adventure installing milwild's redux ROM.
-
After that you go into 4ext, go to the wipe menu and choose "format all partitions (except sdcard)"
Click to expand...
Click to collapse
When formatting is complete, did I need to reboot the phone or not, or just continue to install ROM?
-
Finally go to install zip from sdcard, select the rom i recommended above and flash it.
Click to expand...
Click to collapse
Do I need to put milwild's redux ROM in the root of the Sd card same as 4EXT and flash it?
-When I select milwild's redux ROM is it enough to just mark it and click on it to install began, or has some other method?
talicni67 said:
- When formatting is complete, did I need to reboot the phone or not, or just continue to install ROM?
Click to expand...
Click to collapse
Doesnt matter. I never reboot...just format and install right after.
talicni67 said:
- Do I need to put milwild's redux ROM in the root of the Sd card same as 4EXT and flash it?
Click to expand...
Click to collapse
Doesnt matter where you put it on your sdcard. Once you go to the install menu, 4ext will allow you to browse the contents of your sdcard.
talicni67 said:
-When I select milwild's redux ROM is it enough to just mark it and click on it to install began, or has some other method?
Click to expand...
Click to collapse
Yep, thats enough. Just browse to the zip, click on it, and click once again on the check mark to confirm the installation. The reboot and enjoy.
I did half the job, now the hard part remains.I installed 4EXT recovery and partitioned SD Card but not completely.I did everything like in the tutorial, but the internal memory is not increased.Here's a picture after finishing operations.
When I check the internal memory I have only 125MB.I repeated the operation three times, and the result is always the same.I Insert the CD with Gparted in the computer, boot and go to Gparted menu,delete SD Card and create first 6.4GB like fat32 primary partition.Then select second unalocated part of the SD card and create 1.1GB like ext4 primary partition.Complete operation and when i look into my SD card size is exactly same as in the Gparted (6.4GB) but internal memory is only 125MB.No idea what to do.
talicni67 said:
I did half the job, now the hard part remains.I installed 4EXT recovery and partitioned SD Card but not completely.I did everything like in the tutorial, but the internal memory is not increased.Here's a picture after finishing operations.
When I check the internal memory I have only 125MB.I repeated the operation three times, and the result is always the same.I Insert the CD with Gparted in the computer, boot and go to Gparted menu,delete SD Card and create first 6.4GB like fat32 primary partition.Then select second unalocated part of the SD card and create 1.1GB like ext4 primary partition.Complete operation and when i look into my SD card size is exactly same as in the Gparted (6.4GB) but internal memory is only 125MB.No idea what to do.
Click to expand...
Click to collapse
The storage that it shows in settings will not show the space on your ext partition. But don't worry, its working. You can download an app such as titanium backup which will show you the amount of space on your ext partition. If you're skeptical, try installing a few apps from the play store. If you're not getting any low memory errors you are good to go.
You flashed then oxygen r2 hboot right?
Sent using xda-developers app
No, I'm not yet.I tried now to download some games from play store and got a message that I don't have enough space to do that
Do exactly the same as in video tutorial,and won't work.I'm going tomorrow to a one-week vacation.When I come back I'm gonna recorded the whole process with camerato see where I'm wrong.
talicni67 said:
No, I'm not yet.I tried now to download some games from play store and got a message that I don't have enough space to do that
Do exactly the same as in video tutorial,and won't work.I'm going tomorrow to a one-week vacation.When I come back I'm gonna recorded the whole process with camerato see where I'm wrong.
Click to expand...
Click to collapse
Try partitioning with 4ext. Also you should really switch to oxygenr2 hboot...with stock hboot you are wasting a ton of space on the system partition.
I will ty with 4EXT and please tell me one more thing.When finishing with partition SD Card with 4ext what is next?To put PB99IMG_oxygenr2.zip on SD Card and rename it to PB99IMG.zip and install it.Right?And after that put MildWild MW-9.5.zip ROM on SD Card, select it and install it and thats all or must do something more?
Forget to mention,installing PB99IMG.zip and MildWild MW-9.5.zip doing through recovery.Is that ok?
talicni67 said:
I will ty with 4EXT and please tell me one more thing.When finishing with partition SD Card with 4ext what is next?To put PB99IMG_oxygenr2.zip on SD Card and rename it to PB99IMG.zip and install it.Right?And after that put MildWild MW-9.5.zip ROM on SD Card, select it and install it and thats all or must do something more?
Click to expand...
Click to collapse
1. Partition sd with 4ext
2. Install the PB99IMG.zip using the bootloader (you DONT flash this with 4ext)
3. Go into 4ext > Wipe > format all partitions (except sdcard)
4. Install MildWild MW-9.5.zip
I have a big problem with partitioning SD Card.I tried through recovery 4ext and still not work.When I finish all process,these 1gb appears nowhere, still got 128MB internal memory.No matter what I do, or with gparted or 4ext always have 128mb of internal memory.Can I install MildWild MW-9.5.zip without expanding the internal memory?If not, can you explain to me how to do root to my phone?
talicni67 said:
I have a big problem with partitioning SD Card.I tried through recovery 4ext and still not work.When I finish all process,these 1gb appears nowhere, still got 128MB internal memory.No matter what I do, or with gparted or 4ext always have 128mb of internal memory.Can I install MildWild MW-9.5.zip without expanding the internal memory?
Click to expand...
Click to collapse
You still don't understand what has been explained before
Your internal memory will not read 'internal + sd-ext' because that's just the way the script works.
As long as the sd-card has been correctly partitioned, the A2SD script should work automatically. (you probably didn't need to use 4EXT if you follow the gparted guide exactly, but doesn't matter now)
Keep apps on internal i.e. don't 'Move to SD', and it will trick the apps apks and dalvik cache to sd-ext. You internal memory (/data) will fill up with app data (e.g. just the saved games). Another way to check is to install another app like 'diskusage', it will allow you to browse your partitions.
What is limiting you is that you are still on stock hboot. You should change to OxygenR2 hboot as advised. Currently on stock hboot your /system size is 250MB, but you're using only around ~95MB, wasting over 150MB.
If you switch to OxygenR2 hboot, the system size is 100MB, you'll waste only 5MB, and the rest gets converted to extra internal memory...total 332MB instead of 147MB...i.e. more space for apps
You should now
-nandroid backup
-flash oxygenR2 hboot, either by PB99IMG.zip method as advised, or using fastboot (search for guides)
-reboot back into recovery, full wipe and nandroid restore.
If not, can you explain to me how to do root to my phone?
Click to expand...
Click to collapse
You don't need to root your phone any more. Any custom ROM will already be rooted.