ONLY FOR LG GM730 {EIGEN} !!!
I TAKE NO CREDIT IT WAS DONE BY OTHER MEMBERS I AM JUST COLLECTING THE INFO... AND MAKING IT AVALIABLE TO OTHERS AS THE PROCESS IS QUITE TRICKY
STEP1:: Download the windows mobile device center in windows7
and
activesync in windows xp and install respectively AND also download this file attached [B2CAPP] and INSTALL it to your drive [c].the b2capp is the original lg software update program >
___________________________________________________________________________________
STEP2::now download the lgutilites attached below and extract it into the root drive [c].
___________________________________________________________________________________
NOW THE TRICKY PART!!
THERE IS NO NEED TO DO ANY HARD SPL OR UNLOCKING TO THE EIGEN AS THAT OF HTC DEVICES IN THIS DEVICE
STEP3::now download the lgutilites attached below and extract it into the root drive [c].
STEP4::also download the rom image file from the link i attached below and place it to the same root drive [c]along with the lg utilites files you have kept
NOW THE MAJOR PART {THE CREDIT GOES TO >>>>}
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
STEP6::now you have to run the lg software update program and you must have internet at that time. When it get started connect your device to the usb port of mother board directly......! DONT USE USB HUB!!
STEP7::then click on the option [ INSTALL USB DRIVER] AND THEN THE L.G UPDATE PROGRAM WILL INSTALL THE USB DRIVERS.... it will download the usb drivers first and then it will install it of your lg eigen
[*]STEP8::now when the drivers are installed select the[START UPDATING] button of the program when there is a prompt.it will ask you that did you have saved data from your mobile.then just select [YES]then select [CLOSE] after that choose [CLOSE]. then your phone will come in the emergency mode screen.{basically you just need to be in emergency mode screen by running the program.}
[*]STEP9:: when your device is in emergency mode then unplug the usb and plug in back again.WINDOWS WILL RECOGNIZE IT AS AN LG PC SYNC HARDWARE.which will ensure that the drivers are installed and everything is going o.k......
[*]STEP10::NOW RUN THE {KP500-Utils-EN} given in the l.g utilites
[*]STEP11::now a dos shell will be opened and then write the following commands
1..choose and write V20H_00.kdz to extract the kdz file to to V20D_00.cab.
2..choose [J] and type GM730 follow by cab name and firmware name (V20D_00)
[*]STEP12::the Phone Update software will start to extract V20H_00.cab file in this folder C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone
[*]STEP13::wait until finish as the normal process update from LG
very time taking process patience is must required..................
the file is also not at your post.
Related
ONLY FOR LG GM730 {EIGEN} !!!
I TAKE NO CREDIT IT WAS DONE BY OTHER MEMBERS I AM JUST COLLECTING THE INFO... AND MAKING IT AVALIABLE TO OTHERS AS THE PROCESS IS QUITE TRICKY
STEP1:: Download the windows mobile device center in windows7
and
activesync in windows xp and install respectively AND also download this file attached [B2CAPP] and INSTALL it to your drive [c].the b2capp is the original lg software update program >
___________________________________________________________________________________
STEP2::now download the lgutilites attached below and extract it into the root drive [c].
___________________________________________________________________________________
NOW THE TRICKY PART!!
THERE IS NO NEED TO DO ANY HARD SPL OR UNLOCKING TO THE EIGEN AS THAT OF HTC DEVICES IN THIS DEVICE
STEP3::now download the lgutilites attached below and extract it into the root drive [c].
STEP4::also download the rom image file from the link i attached below and place it to the same root drive [c]along with the lg utilites files you have kept
NOW THE MAJOR PART {THE CREDIT GOES TO >>>>}
[/list]
[*]STEP6::now you have to run the lg software update program and you must have internet at that time. When it get started connect your device to the usb port of mother board directly......! DONT USE USB HUB!!
[*]STEP7::then click on the option [ INSTALL USB DRIVER] AND THEN THE L.G UPDATE PROGRAM WILL INSTALL THE USB DRIVERS.... it will download the usb drivers first and then it will install it of your lg eigen
[*]STEP8::now when the drivers are installed select the[START UPDATING] button of the program when there is a prompt.it will ask you that did you have saved data from your mobile.then just select [YES]then select [CLOSE] after that choose [CLOSE]. then your phone will come in the emergency mode screen.{basically you just need to be in emergency mode screen by running the program.}
[*]STEP9:: when your device is in emergency mode then unplug the usb and plug in back again.WINDOWS WILL RECOGNIZE IT AS AN LG PC SYNC HARDWARE.which will ensure that the drivers are installed and everything is going o.k......
[*]STEP10::NOW RUN THE {KP500-Utils-EN} given in the l.g utilites
[*]STEP11::now a dos shell will be opened and then write the following commands
1..choose and write V20H_00.kdz to extract the kdz file to to V20D_00.cab.
2..choose [J] and type GM730 follow by cab name and firmware name (V20D_00)
[*]STEP12::the Phone Update software will start to extract V20H_00.cab file in this folder C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone
[*]STEP13::wait until finish as the normal process update from LG
very time taking process patience is must required..................
]
[/LIST]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First of all let me clear to you that this is extended tutorial of
How to Install Jelly Bean 4.1 on Zync Z930 and also how to Root it by abdulmomin
After rooting by abdulmomin Tutorial i having problem of auto restarts,Lock out(when i lock tab, it never wake up)
So it's a fix for it..
NOTE:This is not tested on 4.0 ICS ,So if its not work on ICS upgrade to jelly bean 4.1.1 official tutorial available at
Code:
http://www.zync.in/index.php/support/software-firmware-downloads
.
Lets get started
1) Enable USB debugging, GOTO Settings > Developer options > check usb debugging
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2)Connect tablet to PC by using mini-USB cable (u got free with tab)
3)Download shuame from
Code:
www.shuame.com
site is in chines, dont waste time on traslator etc, just click on download :
4)Install Shuame , Launch it, wait for a minute.
It will detect your tablet & install its manager on ur tab.
if following screen arives ur tab is connected.
5)Click on LAST tab & click ROOT, refer picture.
6)Click next, refer picture.
7)let it finish it, your tab will restart 2-3 times,
Your done.
INSTALLing SuperSU
1)Download SuperSu & Root-uninstalller - Attached
2)Exctract achive & copy it to your tablet's SD_card or internal menory.
3)Uncheck the Unknown Sources from Setting > Security.
4)Install SuperSu & Root-uninstalller.
5)Open SuperSu , some chinese message will come accept it, refer ss,
Now it will ask for install binary accept it. . .
6)now Open Root-uninstalller and Accept the superuser rights ,click Grant.
goto end of the list uninstall last two chines apps.
7)Restart your TAB your done.
ENjoy
Nice tutorial, but I did not face any of the problems after rooting.
i can't get the drivers of zync z930. i downloaded all drivers in the forum but none of them works in my win 8 64
bit and win 7 64 bit. Please help . I updated the tab to jellybean but i m not able to root it.
This is the Xiaomi Redmi 5 Plus's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
I want to specify that this tool can't bypass Xiaomi Bootloader Unlock procedure but all others function are working
Make this tool to enable diag port open without root permissions... My phones imei id is lost
not unlock bootloader my device. is redmi5plus.
[question]
So you are saying that this tool isnt compatible with other phones? Is the Device list updated over the years or what?
Please give us the tutorial and link of downloaded files that needed to flash in this Phone, I'm having a hard time to understand How this thing work
Welcome People!!!
In this Guide I show how to flash a KDZ to the LG X Cam using LGUP
Normally, somebody can put their device in Download Mode (LAF) and flash it with LG Bridge, but it will search the Carrier KDZ with the IMEI of the device.
So, LG Firmware has a lot of different KDZs for different carriers and brands, so in this Guide I will show you how to flash an Open (LG Stock) Software to this device and get rid of the bloatware.
What you need (Links after the Thanks Section):
LG X Cam (K580x) [Obviously] {Hopefully can work with another device}
LGUP Store Frame (Recommended the 1.14.03)
LGUP_Common.dll (Very necessarily to LGUP to recognize your device)
The .KDZ of your choice
At lease 1 USB 2.0 Port (Work more stable than USB 3.x for flashing in nearly all devices right now)
Let's Begin!!!
-Download your .KDZ (Recommended an open one, they are more light to download and are more clean), in Latin American Countries, the Colombian Firmware it's the most cleanest one in this moment.
-Download and Install the LGUP Store Frame with the Common LG DLL, as well your Drivers.
-Put the LGUP_Common.dll in C:\Program Files (x86)\LG Electronics\LGUP\model\common (Create the "common" folder in "model", inside the LGUP Folder"), just like this:
View attachment 4633853
On your device, put your device in LAF/Download Mode (Only the Volume Up button pressed while connecting the USB cable until the Firmware Upgrade Screen it´s Displayed)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then, if you have the USB drivers already installed, open LGUP (your device will be recognized right if you had done everything above):
View attachment 4633856
Select you KDZ (Notice that I have the Original Telefonica Firmware above and the Open Colombian Firmware under)
View attachment 4633857
[Process in Refurbish its recommended, but its up to you to select Upgrade]
Latter, Select Start, and the Phone Will Start Flashing
View attachment 4633858
(It's possible that the Phone when finish the Flashing, it can invoke the Recovery and Delete all data, results vary [In my case, it wont delete the first time, but the second time it Format Itself])
Finishing...
View attachment 4633862
It Boot to Life!!!
As a proof of having the Open Software... (Internal Space it's more free and less Apps to deal with)
Appreciated some Thanks, Comments and Good Faith Comments below...
Thanks to:
My Wife (My Only Inspiration to continue working and repairing devices)
My Essential Phone, for the relative good quality photos for this Guide.
My Client who borrow me his phone to work with.:highfive:
You, the XDA User/Visitor to take your time learning from this Guide
Absolute No Thanks to:
LG (Unreliable Devices and a pain in the *** to work with lately):silly:
MediaTek Inc. for those horrendous SoC with No Support, No Source Code and No Updates
Links:
LGUP: https://drive.google.com/uc?export=download&id=0B12zEp6BhQ4xaDRBcUg3SHBVQ0U
Common DLL: https://www.mylgphones.com/wp-content/uploads/2017/12/LGUP_common.zip
KDZs:
K580H (Latin American): https://lg-firmwares.com/lg-k580h-firmwares/firmwares/
K580 (Europe and other counties): https://lg-firmwares.com/lg-k580-firmwares/firmwares/
Drivers for you phone can be founded on https://lg.com/support
here I will provide info about reflashing asus ze620kl, here I give everything that I have tried and succeeded
if you phone Stuck on Fastboot Mode or dead after flashing try this guide :
QFILL : https://bit.ly/3dqcZee
TWRP : https://bit.ly/3BQaNpy
RAW Frimware : https://bit.ly/3Ulf3EJ
OFFICIAL FRIMWARE FROM ASUS ZE620KL ( ANDROID 10 ) : https://bit.ly/3BpuvXS
Follow This Guide,
Open the Back Cover of you phone,,and look and test point below
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
open QFILL Program, Select Flat Build, Chose Select Programer and browse located on RAW Frimware u are downloaded ( prog_emmc_ufs_firehose_Sdm636_ddr.elf )
and chose Load XML, select rawprogram_unsparse.xml and pacth0.xml
and you phone is opened, disconnect the battery connector then connect the two test points and plug in the data cable quickly,driver instled required,and select download button on QFIL
After succeed finish download,
turn on you phone into fastboot mode ( Vol + and Power Button ) and select fastboot flash recovery twrp-3.2.1-0-X00Q-20180508 .img,if succeed,reboot into bootloader
by command Fastboot oem reboot recovery
in TWRP mode,,you phone Sould 0mb internal Storage,, go Wipe,and erase internal storage and chose reboot option in twrp to reboot again in recovery mode,wipe again in this only wipe format data, and chace,,and instal the Frimware rom,,
viola,,you Zenfone 5 a life again
Hello QFILL link broken plz fix
zerolass said:
Hello QFILL link broken plz fix
Click to expand...
Click to collapse
QPST_2.7.480-20220823T041057Z-001
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com