Develop Bugs

hilfe

hi all
ich hab ein problem tom tom erkennt meine karten nicht mehr. obwohl gestern alles gut funktioniert hat.
weisst jmdn was ich tun soll?ich hab schon die karten neu installiert aber das funktioniert nicht..
bitte hilfe

mortezajebeli said:
hi all
ich hab ein problem tom tom erkennt meine karten nicht mehr. obwohl gestern alles gut funktioniert hat.
weisst jmdn was ich tun soll?ich hab schon die karten neu installiert aber das funktioniert nicht..
bitte hilfe
Click to expand...
Click to collapse
soft reset your device
when this doesn't work reinstall your sd card by getting it out and in your device again then tomtom will recognize your cards again

pvdhelm said:
soft reset your device
when this doesn't work reinstall your sd card by getting it out and in your device again then tomtom will recognize your cards again
Click to expand...
Click to collapse
sorry but it didn't work

can you tell me the version of the tomtom application and the rom version of your system. I run tomtom version 6.030 with the europe maps on it and it works great so it shouldn't be a problem.
can you see your sd card in the file explorer?

pvdhelm said:
can you tell me the version of the tomtom application and the rom version of your system. I run tomtom version 6.030 with the europe maps on it and it works great so it shouldn't be a problem.
can you see your sd card in the file explorer?
Click to expand...
Click to collapse
rom version 3.5405.1 WWE
tom tom 6
i can see my sd card in the file explorer but it didn't diagnose my german map

mortezajebeli said:
rom version 3.5405.1 WWE
tom tom 6
i can see my sd card in the file explorer but it didn't diagnose my german map
Click to expand...
Click to collapse
Do you have bluetooth turned on? If so turn it off and try again. If it works then use TomTom home to back up the map to the computer and then using TomTom home reinstall the map with bluetooth turned on.

New Rom - New programs installation

Is there a possibility to have a backup method of the existing programs before a new rom version will be installed? And can i use it with different versions? It takes a lot of time to install the programs again and initialise it with the serial numbers.
Thanks!

Je nach dem
Hallo,
ich habe sehr gute Erfahrungen mit Spritebackup gemacht.
Backup erstellen und bei der Wiederherstellung die Zusammenführungsstufe 1 wählen.
Aber meiner Meinung nach wirst du es letztendlich nur durch ausprobieren herausfinden.
Mal funzt es, mal kannst du damit auf die Nase fallen.
Ich denke wenn der Cook im neuen Rom etwas in der registry getuned hat, dann überschreibst du das mit der registry aus dem Backup.
Hoffe es hilft ein wenig.
In english:
I think you have to try it yourself.
I had good experiences with Spritebackup.
Backup your Installation, and if you restore the Backup on the new rom, use
Stage 1 in combination settings.
In my cases it mostly works.
But i think you overwrite the registry of your new rom, with the settings of your Backup-rom.

Thanks for your reply. I´ll give SpriteBackup a try and cross my fingers

Please let us know how it worked for you.

berndhufmann said:
Is there a possibility to have a backup method of the existing programs before a new rom version will be installed? And can i use it with different versions? It takes a lot of time to install the programs again and initialise it with the serial numbers.
Thanks!
Click to expand...
Click to collapse
You can try to restore data from a previous ROM, but you can run into (registry) trouble. If you have the time and energy to setup an automated installer to do all kinds of installations and provisioning for you, you can take a look at Sashimi.

Problems with making the gold card

hello,
when i start the "GoldCardTool" i get this message
"Die Anwendung konnte nicht richtig initialisiert werden (0xc0000135). Klicken sie auf "OK", um die Anwendung zu beenden."
I know the message is on german, but maybe you know the failure anyways?
I hope someone could help, and sorry for my bad english
cheers
cell

According to Google Translate:
"The application failed to initialize properly (0xc0000135). Click "OK" to exit the application"

How to integrate new Apps?

Well...
Did some mods for my CFW...
HTML:
------------------
MenuID LIST
------------------
00: NONE
01: KEYPAD
02: LOGS
03: CONTACTS
04: MESSAGES
05: EMAIL
06: SOCIAL_HUB
07: SETTINGS
08: MUSIC
09: INTERNET
10: MEMO
11: TASK
12: CLOCK
13: FM RADIO
14: CAMERA
15: VOICE RECORDER
16: VIDEO PLAYER
17: GALLERY
18: CALCULATOR
19: CALENDAR
20: MY FILES
21: SEARCH
22: MY ACCOUNTS
23: JAVA
24: IM
25: YOUTUBE
26: NAVIGATION
27: ALL SHARE
28: NFC
29: IM Folder
30: SAT
31: Voice Command
34: Desk Cradle
------------------
MenuType List
------------------
00: SHP App
01: OSP App(Removable, AppID field required)
02: Preloaded OSP App(Unremovable, AppID field required)
03: Java midlet in SHP
04: Java midlet packed in OSP(Not Used)
05: Native URL
06: Bookmark URL
07: Widget App
08: Widget App(Floating)
09: for initiate Folder
10: Preloaded Widget App
11: Preloaded Widget App(Floating)
12: Fixed Native
#Version
Version=1
#Softkey
MenuID3=0
MenuType3=12
#Page0
MenuID0=1
MenuType0=0
MenuID1=3
MenuType1=0
MenuID2=4
MenuType2=0
MenuID3=2
MenuType3=0
MenuID4=9
MenuType4=0
MenuID5=5
MenuType5=0
MenuID6=8
MenuType6=0
MenuID7=26
MenuType7=0
MenuID8=17
MenuType8=0
MenuID9=14
MenuType9=0
MenuID10=19
MenuType10=0
MenuID11=23
MenuType11=0
MenuID12=24
MenuType12=2
AppID12=0rq06e23py
MenuID13=6
MenuType13=0
MenuID14=21
MenuType14=0
MenuID15=27
MenuType15=0
#Page1
MenuID0=7
MenuType0=0
MenuID1=10
MenuType1=0
MenuID2=11
MenuType2=0
MenuID3=20
MenuType3=0
MenuID4=32
MenuType4=0
MenuID5=25
MenuType5=5
MenuID6=16
MenuType6=0
MenuID7=13
MenuType7=0
MenuID8=12
MenuType8=0
MenuID9=18
MenuType9=0
MenuID10=15
MenuType10=0
MenuID11=31
MenuType11=0
// Polaris
MenuID12=0
MenuType12=1
AppID12=06cm35xl2f
// Caster
MenuID13=0
MenuType13=1
AppID13=577yx64nrt
MenuID14=0
MenuType14=1
AppID14=1xd3tvpnc5
MenuID15=22
MenuType15=0
#Page2
MenuID0=34
MenuType0=0
// Facebook
MenuID1=206
MenuType1=3
MenuID2=0
MenuType2=2
AppID2=8d7uw8z551
// Opera Mini
MenuID3=80
MenuType3=3
// Google Maps
MenuID4=163
MenuType4=3
// Song ID
MenuID5=101
MenuType5=3
// BlueFTP
MenuID6=130
MenuType6=3
// eBuddy
MenuID7=220
MenuType7=3
// Song ID
MenuID8=101
MenuType8=3
// BlueFTP
MenuID9=130
MenuType9=3
// eBuddy
MenuID10=220
MenuType10=3
So the Main menu has only one button at the bottom...
With this code it does start...
But I'd also like to insert badaBoard LITE into menu...
I inserted it into CSC file like "kaufDa"- & "HRS"-App (from German LA1) but it does't appear...
Where is the mistake?

You must also add Like this to mainmenu.init
MenuID2=0
MenuType2=2
AppID2=8d7uw8z551
ID=Your app id

hero355 said:
You must also add Like this to mainmenu.init
MenuID2=0
MenuType2=2
AppID2=8d7uw8z551
ID=Your app id
Click to expand...
Click to collapse
Am I right, that the bold marked numbers declare the position?
Is the App correct in CSC or should it be moved to ShpApp.app?

Taxidriver05 said:
Am I right, that the bold marked numbers declare the position?
Is the App correct in CSC or should it be moved to ShpApp.app?
Click to expand...
Click to collapse
1.You are right
2.Except Default applications app should be in CSC.No ShpApp.Because It will give bootloop when you moved to shpapp

hero355 said:
1.You are right
2.Except Default applications app should be in CSC.No ShpApp.Because It will give bootloop when you moved to shpapp
Click to expand...
Click to collapse
Well...
It is not really a "Default"-Application...
I picked the folder from my Wave II with sTune after downloading from app store...
With permission from the developers I'd like to integrate "badaBoard LITE" into my CFW...
I also put the folder into CSC file...
But after flashing it does not apper...
But the other two apps are visible...

You must full flash with new .csc file

With permission from the developers I'd like to integrate "badaBoard LITE" into my CFW...
Click to expand...
Click to collapse
Du weißt aber schon. Das das nicht geht. In einer ungehackten Firmware...
Die Apps aus der Firmware sind mit einem anderen Certificate signiert...
Das 2. Cert ist aus dem SDK...
Das 3. ist nur für den Store...
Best Regards

Okay...
Und austauschen kann ich die Zertifikate nicht einfach?
Hatte gehofft, dass das ähnlich funktioniert wie mit Polaris. Nur,... pack ich das in die ShpApp.app, bekomm ich ne Bootschleife...
Bau ich es in die CSC ein, wird es trotzdem nicht angezeigt, wie die beiden vorinstallierten aus der DBT...
@hero355: I also tried this, but it has no effect...
As adfree said, it seems, that it hast to do wirh certificates...

Na Du kannst maximal 2 verschiedene signierte Versionen haben...
Die aus dem Store, die wir alle ziehen konnten...
Und eine mit dem bada SDK signierte...
Problemchen...
Ich habe mir fast 2 Jahre die Zähne ausgebissen. Das d. SDK Zert in die FW zu integrieren...
Ich habe es bis heute NICHT gebacken bekommen.
Ob es mit dem, was Du so verabscheust funktioniert. Weiß ich nicht.
Aber Standarmäßig ist es unterbunden, andere Zerts in die FW einzuarbeiten.
So das Du keine Samples oder selbst signierte Apps preinstallen kannst...
Also ich kanns wie gesagt nicht.
MfG

Ah...
Okay...
Dann lass ich das erstmal so raus...
Dachte nur, dass es auf vergleichbarem Wege wie mit Polaris machbar wäre...

Maybe a talk in English will help me to understand what you already know
Did you just take installed files with sTune or you catched OAP file ???
Make sure there is no DCF files in your app files
I guess that the certificate thing shouldn't be present now after the Disable integrity check
Best Regards

I took the installed files...
There ARE DCF files in it...
How should I catch the OAP file?

It can help you
http://www.badapps.ru/4342-obhod-zaschity-shifrovaniya-v-bada-20.html

Hmmm...
I am not really familiar with Russian...
And Google translation is not really useful...

There is several ways to catch OAP file
One of those is installing app on SD card
During download you will see OAP file created in /Mount/MMC/Others/DownloadedAppPackages/
Wait until download of the app is complete
During app install copy final OAP file (refresh from a while to another the folder)
That's it
Best Regards

Hmmm...
Somhow download via Kies does not work currently for me...

the way explained above is with using in phone Samsung Apps

Ah...
Okay...
I will check it...
Can I also grab it while installing on phone?
Hidden paritions are visible in my FW...

1.
http://forum.xda-developers.com/showthread.php?t=1717392
2.
I think this is is misunderstanding or big fault...
badaBoard Devs get more trouble then!
Samsung not allow alternate ways of distributing!
Please not bring our Devs in trouble.
Thanx.
Best Regards

Galaxy Watch R805 - Galaxy Store Fehler: "Fehler, erneut versuchen"

Hallo,
hoffentlich hat jemand einen Lösungsansatz:
Nachdem ich die Watch auf Werkszustand zurückgesetzt und neu eingerichtet habe, kommt beim Start des Galaxy Stores der Fehler: "Fehler, erneut versuchen".
Mir fällt hier gerade nichts sinnvolles ein, ist eine Neuinstallation des Stores möglich?
Vielen Dank & Grüße,
Mathias

matke2 said:
Hallo,
hoffentlich hat jemand einen Lösungsansatz:
Nachdem ich die Watch auf Werkszustand zurückgesetzt und neu eingerichtet habe, kommt beim Start des Galaxy Stores der Fehler: "Fehler, erneut versuchen".
Mir fällt hier gerade nichts sinnvolles ein, ist eine Neuinstallation des Stores möglich?
Vielen Dank & Grüße,
Mathias
Click to expand...
Click to collapse
English please
Translation
Hello,
hopefully someone has a solution:
After I reset the watch to factory settings and set it up again, the Galaxy Store starts with the error: "Error, try again".
I can not think of anything meaningful here, is it possible to reinstall the store?
Thanks, Greetings,
Answer. Go to app settings Clear storage data, uninstall and reinstall, make sure permissions are granted in app settings

Problem with Galaxy Watch
david72262 said:
English please
Translation
Hello,
hopefully someone has a solution:
After I reset the watch to factory settings and set it up again, the Galaxy Store starts with the error: "Error, try again".
I can not think of anything meaningful here, is it possible to reinstall the store?
Thanks, Greetings,
Answer. Go to app settings Clear storage data, uninstall and reinstall, make sure permissions are granted in app settings
Click to expand...
Click to collapse
Question:
Hi, thank you for your Answer.
how can I uninstall and reinstall the Galaxy Store on the Galaxy Watch?
It isn't possible in the app setting on the watch, it also dowsn't work if I try it via wearable app on the phone.
Any ideas?
Thank you!!!
Mathias