[Q] TP2 restarting when loading, not flashing, not hard resseting - Touch Pro2, Tilt 2 Windows Mobile General

Hello, spec's!
I have following problem since august 2010:
After ordinyry ROM (not original) upgrade have usising phone several days, then switching off phone on night, on morning trying switch it on in vain. I've trying recharge akku through cable connected to phone, it charges half of minute then phone swithes on by self(seems like power button abridget but I've checked it with tester), starting showing T-Mobile logo "Stick together" then shows Windows logo then backlight fading then device restarts, so it happen infinite till battery fully goes empty. After that I've bought new battery with independent charger. I've recharging battery with external charger, after complete I placed battery in phone so same scenario with infinite restarting was happen.
Now on phone is installed original ROM and I can't install any other- in bootloader I can install only SPL's, but other ROM's not installs (flashing process freezes on 0%), also hard reset could not completes too- after loading phone in hard reset mode I push "volume up" but nothing hapens.
I haven't any ideas, somebody can help me? Thank you all.

Related

[Q] [Help] Defay dead - what could be the reason and how to rescue?

I've owned the DEFY for over two months, it is rooted but not flashed. Installed many apps and it had been working fine.
Today it suddenly go black when charging. Then, when pressing the power button, nothing happened. At first, when it was plugged into the PC USB port, the white LED was on. But later on, even the LED was always off.
Connected to PC via the USB cable, take the battery off and put it on again, the USB connecting and disconnecting sound was played on the PC. The Windows XP hardware manager briefly showed "Motorola USB device" and then it disappeared.
The screen is always black. Nothing seems to happen when pressing the power button, power+volume up, or power+volume down.
Please help!
I borrowed another DEFY and charged the battery to 100%. The problem persisted. The battery is good, for it can be used with the other DEFY.
Did you overclock your Defy? If yes, this might be your answer!
No. It has never been over-clocked. Just normal usage all the time.
If it can't even get to the recovery (hold volumn down) or bootloader (hold volumn up) screens, there's probably nothing can be done other than sending back for repair.
DEFY won't start after Flashing Chinese Froyo ROM
Hi,
I have the same problem: tried to flash Jboogie3 BlurlessGinger(2/16/2011).
Donwloaded the chinese rom from this thread: http://forum.xda-developers.com/showthread.php?t=895448
Flashed with RSD Lite: Result was "finished" and "PASS".
Pulled out the USB-Cable, LED light went off, but nothing happend.
Tried to reboot but no reaction from my DEFY. Even after pulling out the battery.
No Recovery Boot and no Bootloader Mode. :-(
Can anyone help please.
Thanky you in advance,
hartmuna
--------------------------
Hey guys,
luckily RSD was still able to connect to my DEFY even though it seemed dead. I reflashed the PL Froyo rom and it booted up smoothly. So be aware of the chinese rom!

[Q] GALAXY S2 - So weird [NEED HELP]

SHORT INTRO: My GF's phone, I am from PH [not living in Manila] so no reliable technicians, but my Gf brought it to one, the technician flashed it but I think it was fake or something becase it says Android 4.0, but exactly looks like Android 2.3, AND the phone keeps searching for network even if sim card is inserted. so I checked it myself.
I am frustrated and spent hours trying to fix this phone. AND I DONT GET IT!! WHY??
1.) I thought usb port is broken, but it was fine, i left the phone with charger connected for how many minutes, then it went on showing the battery charging animation.
2.) so i tried to boot, I SPENT HOW MANY MINUTES and TIMES PRESSING THE POWER BUTTON and it won't boot, I SMASHED THE POWER BUTTON [not hard tho], DISASSEMBLED AND CHECKED THE BUTTON, THEN TRIED AGAIN, THE SAME THING, but then IT WENT ON AFTER A FEW SECONDS, THEN I TURNED IT OFF[to prepare for installation of stock rom], THEN IT WONT BOOT, SOMETIMES WILL BOOT AFTER HOW MANY SECONDS OR MINUTES BUT WTF IS THIS. <<sorry :crying:
3.) i tried RECOVERY[stock] AND DOWNLOAD, it went into recovery mode ONCE, i tried wiping it all, "reboot system now" AND IT DIDN'T BOOT, IT WENT OFF, SO I AM BACK AGAIN TO NUMBER 2 PROBLEM. THEN IT WENT INTO DOWNLOAD MODE, but ODIN won't detect, I downloaded samsung usb drivers, the cable is from samsung, accessed the device manager[windows 10] and no device.
WHAT I TRIED/SEARCHED[NO LUCK THUGH]:
1.) turning it on without the use of power button [usb cable to computer, pressing volume up & down]
2.) turning it on with charger then removing battery quickly and reinserting it.
3.) i think everything, i've been searching all over the internet and here, no solution.
PLEASE! I need help. We've been planning to buy Galaxy S5 but we don't want this phone go into waste. This phone is over a year old. Is it because of the ROM? I really tried to boot into recovery but I don't understand problem number 2. PLEASE HELP! I'M DESPERATE :crying:

Bricked my SGH-I747?

EDIT: It was a hardware issue; apparently the start button was stuck, causing it to enter on a power off/on loop. It's been corrected since. Thanks for your interest.
Just a few days ago I installed LineageOS 14.1 on my device. There were some problems, mainly that audio was bugged up and phone calls would lose all voice and audio after some time. As a result, I decided to install OctOS to see if those issues weren't present.
As I was booting into recovery mode, I plugged my phone's charger since the battery capacity was at 40% and I feared it would shut down in the middle of the flashing process. So while it booted into TWRP, it shut down several times. At the last occasion, it booted into recovery successfully, then froze for a few seconds and then shut down.
From that point, the device turns on, shows the Samsung logo for a split second, then turns off. The same thing happens when I plug it in, and I can't even boot into Download mode without the same thing happening.
Did I break my phone, or do I just need to charge the battery?
Thanks in advance.
Try using debrick img and write it to sd card with Win32Diskimager then put it in your phone and boot into recovery and redo the rom install.

Nokia 6.1 TA-1043 Bootloop

My phone is TA-1043. All of the sudden my phone started to restart itself. The power options started to popup from right side automatically and the phone started to restart. Afterwards, I somehow managed to reset the phone but the problem solved for few hours until I connected it to wifi the google play store started to update some apps. I remember there was an unknown app which was installed automatically and again to phone started to restart. This happened after reset and I didn't even signed in my account at that time. I even managed to open recovery but the response there was unresponsive. The phone quickly rebooted itself from recovery mode and got stuck in bootloop. There is no charging animation which shows percentages. There is other charging animation the one without percentage and after putting it on for charge for fews mins the phone automatically starts, stucks in the start screen/Android one and again restarts. As per Nokia, there is an issue with board. And the price quote of the board is more than the phone itself. Kindly share complete details that how can I fix my phone. If the issue is with the board then the phone shouldn't even turn on or go into recovery mode or download mode.

Battery problem ? Bootloop when battery unplugged, flash LED when plugged, fastboot ok

Hello everybody,
I have a problem with my Xiaomi Mi A2 Lite (with bootloader unlocked but stock ROM) : I changed the screen and digitizer, the phone being okay after a repair and working for a few days. Then it stopped turning on when I press power button (the screen does not turn on). When I plug charger I have the white LED flashing but nothing (even after hours of charging with different chargers and USB cables). I can not go to fastboot by pressing power button down.
I disconnected the battery, the phone starts when plugged into charger but bootloops (with "Your device software can not be checked" and the fixed "android one unlocked" screen). When I replug battery in the bootloop stops and we get back to the black screen/flashing LED state.
I can go to fastboot mode when pressing volume down with battery disconnected, I tried flash_all from the official daisy_images package with no success. I also tried to fastboot boot to TWRP but I get a black screen (with bootloop if battery is unplugged).
I also tried QDL flashing of the official ROM using the guide on the forum, no success either.
I tried swapping the battery for a new one, still doesn't work.
When I dump fastboot vars I have amongst other "battery-soc-ok: no" (with and without battery plugged) and a reported battery voltage of 1000 with battery, 0 without.
I measured (with a voltmeter) the voltage between + and - pins of the battery I have 4.13V.
Would you have any idea of something to try ?
Thank you for your help,
any updates on this?, my unit is stock no reimage or what not but while charging one time it wouldnt turn on white LED flashing also but no display, so i let be , then after awhile i discovered it wont boot up, after several times trying ,i got to boot but went to be stuck on "android one unlocked" screen, i tried draining the battery same results , wtf is wrong with this phone now it works perfectly for the past 3-4 years
I swapped the motherboard and it worked again.
damn, where did you purchase your motherboard? and did it erase the files inside?

Categories

Resources