Develop Bugs

Help A Newbie once A Day with An MDA

Hi All
Have a problem with my latest phone. A so called friend told me to upgarde the ROM so as to remove all the T Mobile poop in it. So he gave me the software I started the upgrade all went well stage 1 then stage 2 and finally stage 3. It said Congrats just hit reset and the power button at the same time and its done. Easy Me thought..... Not Easy....... Its now just booting up and screaming at me. The screen wont lite up and nothing else. I have tries to reset over 10 times now.....Anyone got any ideas, have I shot and killed my new phone...
Ta JG

this is not good. do you know which phone you are having? MDA is all the phoen from t-mobile. First identify your phone. Then, you need to know if you are using the right ROM on the right phone. THEN, you have to know are you using the right phone ROM on the phone (eg G3 or G4).

Its an MDA Copmact 11 does that help....

common.. more info. which rom you've used?

Alpine_Ext-1.11.162_Radio-1.04_stuffstripped_Camera_Fixed.
SORRY i AM NEW TO THIS AND i AINT GOT A CLUE WHAT i AM DOIN...HE HE HE

Oh forgot to mention it all went in ok, stage 1, 2, 3 and even told me on my computer it had worked. It was when I tried the power and reset that it all came tumbling down........

JeanGenie said:
Oh forgot to mention it all went in ok, stage 1, 2, 3 and even told me on my computer it had worked. It was when I tried the power and reset that it all came tumbling down........
Click to expand...
Click to collapse
All I would like to do is get the old stuff back then worry about an upgarde later can this be done without me having to do unspeakable things to the phone????

You've just flashed your Charmer phone with an Alpine ROM. If that doesn't kill your phone, I'm not sure what will.
Ok, try this. Hold down all 3 buttons -> power, camera, record buttons, and poke the reset. See if you can get a 3 colours screen.
If you get that, close active sync (stop the process WCESCOMM.EXE), connect your phone to your PC (when it is displaying the 3 colour screen). Then you ought to be able to run the ROM update file (EXE) from t-mobile (check the Charmer Wiki) and that may fix your problem.

hanmin said:
You've just flashed your Charmer phone with an Alpine ROM. If that doesn't kill your phone, I'm not sure what will.
Ok, try this. Hold down all 3 buttons -> power, camera, record buttons, and poke the reset. See if you can get a 3 colours screen.
If you get that, close active sync (stop the process WCESCOMM.EXE), connect your phone to your PC (when it is displaying the 3 colour screen). Then you ought to be able to run the ROM update file (EXE) from t-mobile (check the Charmer Wiki) and that may fix your problem.
Click to expand...
Click to collapse
I have done what you have said, I think...DUHHHH the screen has not lit up but its now showing USB in the top and V1.02 in th ebottem. I have connected it to my computer but active sync has not cut in yet....... I assume I have done it wrong....

hey
you DONT want activesync to cut in
put it in that 'usb mode' that you managed to get and just run the OFFICIAL T-Mobile rom update utility, but make sure to kill the wcesscomm process in windows' task manager.
good luck!

duke_stix said:
hey
you DONT want activesync to cut in
put it in that 'usb mode' that you managed to get and just run the OFFICIAL T-Mobile rom update utility, but make sure to kill the wcesscomm process in windows' task manager.
good luck!
Click to expand...
Click to collapse
I have just downloaded the t-mobile update as below
RUU_Compact ll_2060227_20602110_021921_T-MobileUK_Ship
I have switched off the file as you have said in the task manager. The update laods then says cannot find MDA Device connection error 274.
Could a system restart help?????
Sorry for all this, maybe stick to things I do know in the future, like washing my car.......

hey
get your phone back into that screen which had 'usb' written on it.
then do this:
download and install a program called 'winrar', you've probably heard of it and in all likelihood already have it!
once its installed, right click that t-mobile update you just download and select the 'extract to.../' option that will come up in the drop down menu, let it extract to the folder it does, open the folder in there will be a few files: you want the file which is called something along the lines of 'upgrateUT' or RUU Upgrade UT, it'll be an exe,
connect your phone up to the computer (with it in the USB mode and activesync disabled) and run that exe, it should go through as normal
good luck
(if you want any help just post back! best bet is for you to extract the files and report back with the name of the files in the folder!)

duke: I think he did that. He downloaded the EXE from http://www.tm-phonedownloads.com/download_manager_mda_com2.html
and it seems not able to detect his Charmer.
JeanGenie: Just to make sure, when you run that EXE, you have the phone connected with it displaying USB?

duke_stix said:
hey
get your phone back into that screen which had 'usb' written on it.
then do this:
download and install a program called 'winrar', you've probably heard of it and in all likelihood already have it!
once its installed, right click that t-mobile update you just download and select the 'extract to.../' option that will come up in the drop down menu, let it extract to the folder it does, open the folder in there will be a few files: you want the file which is called something along the lines of 'upgrateUT' or RUU Upgrade UT, it'll be an exe,
connect your phone up to the computer (with it in the USB mode and activesync disabled) and run that exe, it should go through as normal
good luck
(if you want any help just post back! best bet is for you to extract the files and report back with the name of the files in the folder!)
Click to expand...
Click to collapse
okie dokie...have extracted all th efiles and these are what I have got in a seperate folder
EnterBootloader
nk.nbf
README
ROMUpdateUtility
RUUGetInfo
RUUResource.dll
Thats all the files inside the folder

is "ROMUpdateUtility" an EXE file? try running that.

hanmin said:
is "ROMUpdateUtility" an EXE file? try running that.
Click to expand...
Click to collapse
I have and after a few seconds it says error 274 cannot find device....!!!!

well, it is amazing that you can go into the bootloader at all. I'm suspecting that the bootloader is not the Chamer bootloader, hence the ROM update EXE is not able to find it. Where did you download the Alpine ROM. Give exact link.
UPDATE: Look at the post here
http://forum.xda-developers.com/showthread.php?t=269329&highlight=
by 'windowsceportal'. He is able to flash the phone with 'Prophet RUU 2.5.2 noID check' with the DLL RUUResource.dll of Charmer RUU. I'm not very certain, but the noIdCheck may able to help.
UPDATE: As according to this post
http://forum.xda-developers.com/showthread.php?t=280128&highlight=
the bootloader mode that you are having is that of an Alpine (Charmer's bootloader mode is a screen with 3 colours). So, probably the updating program doesn't work. However, as an idea, you may want to try getting alpine upgrading EXE files to load Charmer ROM into the phone. It is an idea, not sure how can this be achieved.

hanmin said:
well, it is amazing that you can go into the bootloader at all. I'm suspecting that the bootloader is not the Chamer bootloader, hence the ROM update EXE is not able to find it. Where did you download the Alpine ROM. Give exact link.
UPDATE: Look at the post here
http://forum.xda-developers.com/showthread.php?t=269329&highlight=
by 'windowsceportal'. He is able to flash the phone with 'Prophet RUU 2.5.2 noID check' with the DLL RUUResource.dll of Charmer RUU. I'm not very certain, but the noIdCheck may able to help.
UPDATE: As according to this post
http://forum.xda-developers.com/showthread.php?t=280128&highlight=
the bootloader mode that you are having is that of an Alpine (Charmer's bootloader mode is a screen with 3 colours). So, probably the updating program doesn't work. However, as an idea, you may want to try getting alpine upgrading EXE files to load Charmer ROM into the phone. It is an idea, not sure how can this be achieved.
Click to expand...
Click to collapse
This is the link i used to get the original upgrade
ftp://xda:[email protected]_Radio-1.04_O2stuffstripped_Camera_Fixed.rar
Does that help any...

JeanGenie said:
This is the link i used to get the original upgrade
ftp://xda:[email protected]_Radio-1.04_O2stuffstripped_Camera_Fixed.rar
Does that help any...
Click to expand...
Click to collapse
Is there anyway of just deleting the Alpine ROM and reinstalling the correct charmer. I, as you have probably guessed aint got a clue what I am doing never lone saying...he he he
Just a thought.......
Plus my new XDA IIi was delieverd today am I being silly when I say I have been told that I can debrand it with the Alpine rom as listed above, dont want to try anything incase this phone goes belly up also....

Hellllppppp...........
Its me again, can anyone make any other suggestions to my problem please. I have tried in vain to do what has been already suggested but it seems either it wont work or more to the point I have no clue as to what I am doing.

How to unbrick an Imate 9502?

After spending many months waiting for the official WM6.1 ROM...
After following the firmware upgrade instructions explicitly (including the notes on Vista)...
I now have a bricked 9502!
The phone just simply tells me to reconnect and try and run the upgrade again immediately after it is powered on. (That doesn't work) I've been searching high and low for a method to reload the firmware.
As anyone who has dealt with iMate knows - their support is worse then useless. Its infuriating! (If you ever do get connected to their online support, they will simply disconnect the session if they don't have a quick answer)
...anyway...
I have the IMAGEFR.mbn and CP.mbn files extracted from the install set and copied to an SD card installed in the unit. I just can't find any info on how to get the phone to load the two firmware files from the card at boot time. (I'm pretty sure the USB connection is going to be useless).
Beware: All this may be due to the fact that Vista-64 wasn't a supported update environment (although the ReadMe specifically gave instructions for Vista - it did not specify 32 or 64).
Help is appreciated!

evanevery said:
After spending many months waiting for the official WM6.1 ROM...
After following the firmware upgrade instructions explicitly (including the notes on Vista)...
I now have a bricked 9502!
The phone just simply tells me to reconnect and try and run the upgrade again immediately after it is powered on. (That doesn't work) I've been searching high and low for a method to reload the firmware.
As anyone who has dealt with iMate knows - their support is worse then useless. Its infuriating! (If you ever do get connected to their online support, they will simply disconnect the session if they don't have a quick answer)
...anyway...
I have the IMAGEFR.mbn and CP.mbn files extracted from the install set and copied to an SD card installed in the unit. I just can't find any info on how to get the phone to load the two firmware files from the card at boot time. (I'm pretty sure the USB connection is going to be useless).
Beware: All this may be due to the fact that Vista-64 wasn't a supported update environment (although the ReadMe specifically gave instructions for Vista - it did not specify 32 or 64).
Help is appreciated!
Click to expand...
Click to collapse
I've read many posts around stating that upgrading WM devices through Vista has proven to be a nigthmare for a lot of devices.
If possible, try to get a WinXP equipped machine, and perform the SW upgrade there normally (i.e. by clicking on the EUM SFX executable file on the PC).
You see, I upgraded mine through my XP lappy, and the process simply ran flawlessly.
Just my 2 cents...
Cheers!
Carlos

the problem is not in the vista, i flash using vista ultimate and no problem, u can unbrick by
pressing fn button and call (green) button then press the reset button, without let the 2 previous button go until u can see the imate logo or hard reset message.
I hope this can help.

thanks a lot i have unbricked my imate
thanks a lot by your code buttons i have unbricked my i mate

Help!Where can I find LG Fathom's ROM?

Hi. I have a LG Fathom and I want to cook its ROM. However, to cook that I guess I need its ROM first. If you know there to find its ROM or if you know how to dump the ROM, can you please help me?
Thanks

Install Microsoft's Network Monitor** (its free - netmon from now on, im lazy ) http://www.microsoft.com/downloads/...1d-06cb-4658-b7f6-3088333d062f&displaylang=en
Close all your browser windows, instant messenger, email, anything that uses the network should be stopped while you do this.
Start netmon, and tell it to capture all the traffic on your network card.
Then start the lg-updater program (get it from lg directly), and have it check for updates for your phone.
Go back to network monitor and stop capturing traffic when it's done.
You can then either browse through the captured traffic in netmon directly, and see if you can find a url yourself (it'll be an exe or kdz file) or send me the capture file and I'll find it.
**If you're familiar with wireshark you could use that instead of netmon.

Hey there can90. If you manage to get the base rom for the LG Fathom would you be able to post the link. There is some stuff in that phone that I'm sure others would love to port to other phones; including myself

Can we flash unsigned roms to the Fathom?

Can90 managed to get me a network capture to look through, unfortunately it doesn't contain a reference to the stock rom. I assume this is because LG just hasn't uploaded it yet.
For anyone that wants to play with URLs to try and find it, this is the relevant portion of the response to lg's updater app.
<model>LGVS750SS</model>
<suffix>AVRZDB</suffix>
<esn_date>20100420</esn_date>
<sw_version />
<sw_url />
<sw_locale_url>/</sw_locale_url>
<sw_recommand_uri>AIC/GLOBAL</sw_recommand_uri>
<app_version />
<app_url />
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type />
normally sw_url and sw_locale_url would have what we want, but they're empty

Hopefuly I will be getting an LG Fathom tomorrow so I will try to help out here. Has anyone else had any luck snagging a complete ROM from LG's site yet?

Nobody that I've been able to find.
I have discovered there is a seemingly different (from the generic one used for the expo) updater for verizon.
I haven't actually looked at it yet, but it's different from the usual B2CAppSetup and is labelled as 1.0.1.8 (the generic one offered up on lg's site is 1.0.1.7) ( http://csmg.lgmobile.com:9002/client/app/Verizon/LGMobileUpdate.exe )
I'm not sure which one can90 used (I've pm'd him to find out and try the other) but if you've got a phone and a few minutes you could try them both.

Just as an update - I joined the LG forums and posted a question on the fathom update. Here is the post - http://www.lgcommunity.com/forums/aff/6/aft/6481/afv/topic.aspx
When I find out there's an update I will let everyone know.

I just checked the lg update tool and the fathom is on the list as of this morning! It wasn't there when I looked last night.

Is it possible that the fathom update could be a cab file? so far I have this -
URL: /swdata/WEBSW/LGVS750/AVRZDB/VS750ZV5_06/VS750ZV5_06.SV5_06.P58006.R5.cab
Edit:
link here - http://csmg.lgmobile.com:9002/swdat.../VS750ZV5_06/VS750ZV5_06.SV5_06.P58006.R5.cab
Is this whats needed? Not trying to push for an answer, just updating and asking...

da_reeseboy said:
Is it possible that the fathom update could be a cab file? so far I have this -
URL: /swdata/WEBSW/LGVS750/AVRZDB/VS750ZV5_06/VS750ZV5_06.SV5_06.P58006.R5.cab
Edit:
link here - http://csmg.lgmobile.com:9002/swdat.../VS750ZV5_06/VS750ZV5_06.SV5_06.P58006.R5.cab
Is this whats needed? Not trying to push for an answer, just updating and asking...
Click to expand...
Click to collapse
This doesn't appear to be a real cab file....not one that anything I've got recognizes anyways
Windows explorer opened it when others couldn't
At 130 megs it probably is what we're after, just in a new (to me at least) format. Did you try flashing it?
Running "strings" against it the first few turned up are
These are the contents of the cab file
VS750ZV5_06.SV5_06.P58006.R5.wdb
VS750_W_1_0_7_0.dll
VS750ZV5_06.SV5_06.P58006.R5.wdh
the wdh/wdb are not extensions I'm familiar with and I'd be more than a bit surprised if it was a ms works database. I'll try and take a closer look at the file later today if nobody else has by then.
Edit: Apparently that's the same packaging the vs740 came in. From what I could find, people hadn't been able to find tools to successfully unpack the wdb.
Going through the flashing process should leave a .bin file in the usual lgmobileax location, not clear whether that's something we can unpack with existing tools either.

Hey there da_reeseboy. Great find on the firmware. Once quick question though that may help me get past where I am stuck extracting the firmware. What is the firmware version that is running on your fathom. If your not sure where to look, got to start menu/Settings/System/System Info and click on the plus box next to Version Info. What does it say after ROM?

Dark9781 said:
Hey there da_reeseboy. Great find on the firmware. Once quick question though that may help me get past where I am stuck extracting the firmware. What is the firmware version that is running on your fathom. If your not sure where to look, got to start menu/Settings/System/System Info and click on the plus box next to Version Info. What does it say after ROM?
Click to expand...
Click to collapse
I don't have a version info with a plus sign next to it but under software version it says VS750ZV4

Thanks da_reeseboy. I see that that is an older version than the cab from the updater program. I haven't had any success extracting the files. If someone with a fathom is willing to try this we may be able to get the rom. We would need someone to attempt to flash their phone to the new firmware. To do this run the updater program and connect your phone to your computer. Next, make sure you have an activesync connection and start update. It should place the phone in emergency download mode. The update program should start running, will detect your phone, download the new firmware and start loading it to your phone. This is where you will need to search for the rom. In win xp go to:
C:\Documents and Settings\All Users\Application Data\LGMOBILEAX\Phone
in win7:
C:\Users\All Users\LGMOBILEAX\Phone
The rom should be in that folder. Just simply copy it somewhere so that you have a copy of it after exiting the updater since the updater deletes the file after completion. After that we would just need you to upload the rom to a free file sever and post the link for someone to download.

I'll be happy to try it in the morning with some coffee lol. I'll post my findings.
Edit: Do we want to try to pull the current version on my phone first before flashing the update? Just as something to compare to?

just an update - I dumped the stock rom, then tried to do the update but my computer is saying that it can't connect to the com port. I'm gonna try it on my laptop when I get back home (family was hungry so we went to get food). does anyone know if the update tool has an issue with win7 64 bit vs 32 bit?
Edit: home now, started update on my laptop - its working great so there must be an issue with 64 bit...

Update done. I snagged the files in that folder, but I don't think they will do us much good - its just the contents of the cab file.

For those interested, here is the contents of the phone folder during the update -
http://www.multiupload.com/5ZA2Z2QB00

Hey da_reeseboy. Thanks for trying. i was hoping that the updater would unpack the wdb file. Guess it didn't. You had mentioned something about dumping the original version on your phone. Do you have a copy of the dump?

I just finished uploading it and a dump of the update -
VS750ZV4 - http://www.multiupload.com/M7FYR42S60
VS750ZV5 - http://www.multiupload.com/KTED97KZU3
Think we can do anything with these?

Updated version to enable Unknown Sources

This is the latest release of my fix (June 14, 2011). This version addresses the Market ID and Moto Blur issue.
This version does not require the use of scripts on the phone. It uses ADB and sqlite3 (both are included in the zip file).
I created a new thread here because the older version was so full of bugs and comments about said bugs I figured it was time to start fresh, seeing how I am using a different method (the method I should have used to begin with) for this hack. Also, this should have been in development to begin with.
I have not had a chance to test the latest version, aside from verifying the awk command works as exptected. The rest is a strong educated guess, mixed with a re-tooling of it to just use Android Debug Bridge to do what I was having scripts do in the past. Should be much more reliable.
IF YOU DECIDE TO USE THESE INSTRUCTIONS: PLEASE, read through this page entirely from top to bottom at least once prior to doing anything. This way, if you are unsure on anything, you can ask the questions you need answers to. I am not liable for anybody messing up their phone because they didn't think to read the F'n manual prior to following these steps.
If you don't read this through completely before starting, and you brick your system, Don't come crying to me. I warned you.
This version makes it close to impossible to brick the system, but I left that bit in to cover my arse.
If you do not have the phone rooted, download the second zip file, and install the drivers found below:
Motorola Driver(install before you run the batch file)
You will need to enable USB Debugging:
On your phone,go to Settings->Applications->Development->Check "USB Debugging"
Latest version installs busybox for you, but if it doesn't, the script will pause for you to check, and tell you how to quit out of my script before proceding. If you have issues with that, let me know. I haven't tested this version, but by all accounts, it should be more reliable than my previous iterations, with the plus side of not having to purchase an app.
I have not tested it, so you may still need to tell it to install, but it should install the apk.
1. Download the attachment located in this post.
Unzip to a folder on your desktop.
PLUG IN YOUR PHONE NOW!!!
Double click on the batch file ("enable_unknown_sources.bat"). You may have to run as administrator, but I don't think so. Built on Windows XP (I'm a linux guy who wrote this at work in a couple minutes)
When it prompts for you to OK the super user for "unknown", look at your phone. It should have a prompt. If not, it may be ok. We will see....
once your phone has rebooted, you phone will have "unknown sources" enabled already. Don't worry about rebooting. The batch file did that for you.
Quite a bit less work than before. Good news: it's done! never to worry about it again...unless you upgrade....
DISCLAIMER:
DO NOT FOLLOW ANY OF MY STEPS IF YOU ARE UNSURE OF WHAT YOU ARE DOING! I have done my best to ensure that the instructions are accurate, but I made mistakes in the first revision, so who's to say that I didn't miss something this go 'round as well? If you decide to follow this walk-through, your actions are an agreement to not hold me liable if your phone becomes a pretty brick. I am not responsible for what you do with this information. If you have no idea how to do any portion of these instructions, you can either walk away (best idea), or ask for help here.
I am also not the 2nd shooter on the grassy knoll, nor am I the cause of all your woes throughout life. I always wanted to say that in a disclaimer.
Thanks to Vahnyyz for reminding me that I forgot to have you enable USB Debugging.
IF YOU HAVE PROBLEMS:
Have you installed the Motorola Drivers?
Do you have Debugging enabled?
If the answer to the 2 questions above are "yes, damnit! Give me a good answer, and stop wasting my time with these stupid questions", then you will need to tell me at what point the scripts fail. I will look into the problem as fast as I can.

so I tried the program you put on and everything because I haven't been able to root my phone as of yet, but the file I downloaded that included rooting did not work, everytime I ran the application it stated that "Device Not Found" and my phone is connected through USB at the moment.

Forgot a part
Thanks for letting me know about your issue. You need to do the following:
Ensure you have installed the drivers on you computer
Ensure USB Debugging is turned on
To enable USB Debugging, (on your phone...duh) go to Settings->Applications->Development->Check "USB Debugging"

as soon as I run the. bat file, command screen tells me to make sure that busybox is installed, which it is, to unplug phone, go to, busybox and install. Wife's phone is already rooted, once I hit next, "unknown" will pop up on the screen for a second and then....nothing.

Need to fix that to state "....after you ensure busybox is installed, plug phone back in"
Just plug the phone back up prior to proceding
Sent from my GT-I9000 using XDA App

How is the no blur version coming along....anxiously waiting for that!

JBallin4life27 said:
How is the no blur version coming along....anxiously waiting for that!
Click to expand...
Click to collapse
I am running into a problem I believe is caused by an older version of clockworkmod. I am trying to see if I can get a newer version running.
The issue:
It appears that the update file I generate is incompatable with the updater built into the version of ClockWorkMod I am running. Anybody have a newer build of the CWM I can use for testing?

jonsjava said:
I am running into a problem I believe is caused by an older version of clockworkmod. I am trying to see if I can get a newer version running.
The issue:
It appears that the update file I generate is incompatable with the updater built into the version of ClockWorkMod I am running. Anybody have a newer build of the CWM I can use for testing?
Click to expand...
Click to collapse
I had CM6 running on my motorola backflip and still have all the files saved on my computer...would it be in there somewhere and would that be useful to you?

JBallin4life27 said:
I had CM6 running on my motorola backflip and still have all the files saved on my computer...would it be in there somewhere and would that be useful to you?
Click to expand...
Click to collapse
I'm needing the second stage recovery file to make ClockWorkMod something newer than 2.x.x Needing to have it somewhere in the neighborhood of 3.x

jonsjava said:
I'm needing the second stage recovery file to make ClockWorkMod something newer than 2.x.x Needing to have it somewhere in the neighborhood of 3.x
Click to expand...
Click to collapse
Yea lol...no idea what that all means...sorry i'm not any help

Bootloading not working..or is it :)

Hello my name is austin and im running windows 8.1 ya i know why would i want that..well its fast sooooo..any whooo i have rocket chip 3066 based tablet and im trying to get it to get into bootloader mode witch I DID but it ended up saying device discriptor error on the usb devices SOOO i found the hub it was connected to and disabled it then it made the rock chip show up on the list of devices i opened rk batch tool as a test and would you know it was green well thats not the tool i have to use to flash this kernel i have to use the regular rk andriod tool..but when i open it it says no rk andriod usb device detected...is that weird? any how i need to get this to work..someone any one? have any ideas as to why? yes iv reinstalled the drivers and tryed 17 differnt ones and the only one that works is the rk usb driver i got from rk site.
i really have no idea how to make this work..so i tryed the rk batch tool and tryed to see if i could get it to do any thing.. so i clicked the swtich button but it said this is not supported..well it was dumb for me to try sense its allready in flash mode but still...i fill like somthing is wrong.
any help? ohh im using the GAME MID tablet
(EDIT(
GOOD NEWS EVERY ONE i figured out why the other programs would not regonize it so i went into the settings .inf file and changed the usb11 thing to 1 and then it WORKED!
but when i tryed to flash the kernal and recovery img files in the tool it showed the out put but said info start run . start to test. test device failed. run failed....this is so close..i hope someoen can help me im using a kernal edited by OMA he did it just for me and said to just flash the TUVVA kernal and the rocvery img provided by him and us the correct paths I DID and the address..witch i did.. :/ i hope someone knows SOMTHING

pl
Bump

ummm
No one can help??????

excellent my friend, but in other problem could you please put the specifications device?