Hey guys since nobody has posted a true review of the new Trident Cyclops case for the vibrant yet, I thought I'd take the liberty of making one myself. I hope you enjoy it. Feel free to leave any comments or opinions on the case you have below.
-bobofosho123
I have one of these sitting in the box that I ordered and recently received. I was planning on using it, but then it arrived and I saw how much thicker and wider it made the phone and it's kinda turned me off. I am probably going to return it. I also ordered the recently released Seidio Innocase for the Vibrant though and it should be here tomorrow. It looks to be a bit closer to what I want out of a case (minimal bulk added), though at the cost of less protection like the Cyclops provides.
I don't know. I might consider keeping it and switching to it for times when I may want the extra protection, and use the Seidio for a majority of the time.
Oh man nice review. I just can't hide the beauty of my Vibrant
The built-in screen protector I don't like but it's a ncie feature.
And that's not red, bobo, that's pink.
You forgot to show us how to screen responds with the screen protector that comes wit the phone.
Very helpful review. It's hard to imagine damaging the phone with that level of "rugged-ization." However, I'm not sure that I would want to have that amount of additional bulk for everyday use.
ColorNapkin said:
Oh man nice review. I just can't hide the beauty of my Vibrant
The built-in screen protector I don't like but it's a ncie feature.
And that's not red, bobo, that's pink.
You forgot to show us how to screen responds with the screen protector that comes wit the phone.
Click to expand...
Click to collapse
It's pretty responsive in terms of using it. But the only issue that I have with the case is that it can be a pain at time to bring down the notification from the top of the screen. At the end of the day it's really not too big of a deal and I don't mind the extra bulk if my phone is safe.
I love the vid cuz he was honest. But i cant deal with the bulk and the rugged look. That's why i went with the Aegis. It's a lot more sleeker and actually looks good. Also my density is set pretty low and i need easy access to my notification bar. Thanks for the video.
I really love this case i got mine in blue and i made some modifications to the case it took out the screen protector so i could actually use it and removed the cam cover cuz it messed with quality, all in all it's amazing i can actually throw it at the ground repeatably and it wont die
I also had to make some modifications to my Cyclops case. I sanded down near the ports a little bit so I can get my nails in deeper to open up the usb and headset tabs. I removed the main screen protector and may also have to remove the camera screen protector because it causes glare in video recordings. But with my luck soon after I remove it, something is going to scratch my camera lens. What I really like about this case is that it makes the phone completely level. They added another hump near the top to even out the bottom hump. I don't think I've seen another case do that yet. It adds a good amount of bulk/grip to the phone. When the phone is naked, it feels like I'm talking on a playing card. Only thing I really don't like about it is that the silicone outer part comes off too easily at times. I wish they made the grooves deeper or something so it locks into place better. Overall, I'm pretty pleased with my Trident Cyclops case.
My girlfriend and I have had this case on our vibrants since a week after we bought them. We love them, the only complaint we have ever had was that sometimes it can be difficult to get the rubber piece out of the charger port and headphone jack. The company now makes a 2800mah battery and slightly bigger case for the vibrant. I am debating on ordering 2 of those. Hope this helps
Related
So the first thing I noticed was that this is not a slider, but a front-and-back snap case. The product description says "Unique snap together design and opening slot makes putting on and removing your case easy" but for some reason thought it was a slider like the Surface II for the Captivate. So, it's not their fault I misunderstood.
Since the front bezel cover is so thin, my initial impression is that it seems a little flimsy. The back cover is also quite thin and has no lining like other Seidio cases. I think this was a conscious decision in order to keep the case as slim as possible. The fit is quite precise, so I don't think the lining would really make much difference as there is no movement within the case.
Although the front bezel piece seems flimsy at first, it feels quite sturdy once you snap it to the back cover. I do have some concerns the clips that snap together will wear down over time if you remove the cover frequently. Only time will tell on that point.
It has Seidio's "signature soft touch finish" which is like a somewhat rubberized matte texture. It's quite nice, but attracts prints if you have oily fingers.
Overall, the fit is pretty much perfect and the cutouts are precise. It's very thin and has a nice texture. Of the six cases I have, it's certainly the nicest. It does, however, cost about as much as the other five cases combined - $29.95.
At $19.95, I'd probably recommend it in a second. At $30 I have some reservations, namely the long term durability of the clasps that keep the two pieces together.
Vibrant case wont work
should be gettin mine tomorrow....
i think they have 6 month warranty which actually does work. thats another big plus with this company.
kolyan said:
i think they have 6 month warranty with actually does work.
Click to expand...
Click to collapse
Good to know. Hopefully won't have to use it.
Thanks for the review.
I'm still sticking to my white mesh case. I like really light and almost-not-there type of cases.
Thanks for the review, mine should be here within a day or so.
I ordered using the coupon code XMAS15 that was posted here. Not certain it's still valid though as the poster said it may expire on the 19th.
To the OP, how does the phone feel in your hands compared to what you had previously?
Also, did your volume buttons ever rattle? This is my only hesitation as the silicone case from t-mobile prevents the rattles I have from the volume rocker (which is loose).
s15274n said:
Thanks for the review, mine should be here within a day or so.
I ordered using the coupon code XMAS15 that was posted here. Not certain it's still valid though as the poster said it may expire on the 19th.
To the OP, how does the phone feel in your hands compared to what you had previously?
Also, did your volume buttons ever rattle? This is my only hesitation as the silicone case from t-mobile prevents the rattles I have from the volume rocker (which is loose).
Click to expand...
Click to collapse
For reference, I've had TPU's, hybrid TPU/Plastic (the one with hard clear back), a generic version of the Barely-There, and a flexible plastic perforated case (XMatrix Cover from DayDeal).
The added size and weight is similar to the XMatrix perforated case. It's not as slim as the Barely-There style cases, but I think it's definitely lower profile than TPU or silicone.
The finish is nearly the same as the Barely-There knock off I have, but seems a little more durable (the coating on the old case started to come off within days). It's smooth, almost suede-like, but has a bit of tack when held in the hand. When put on a smooth surface, like a desk or on wood trim in a car, it does not stick at all. This is a bit of a negative for me. One thing I like about TPU cases is that they kind of stick when you lay them on a smoother surface (I usually put my phone on the wood trim next to the gear shift in my car) but are not tacky otherwise.
As for the volume buttons, mine are not loose so I can't really comment on that issue.
One other thing I've noticed in the last few days of using the case, is that bezel cover is attached to the bottom part in only a few spots so there is some give in the areas that aren't clipped together. I think they should have added a couple more contact points on each side. It's not terrible, but I'm a bit OCD so it probably bothers me more than it would most other people.
I'll report back, should be here anytime now.. thanks man.
Case is good, very slim and feels good in hand, not perfect like other Seidio products. Like the review states, the case is NOT slide-on which sucks. I dont know why they used clip-on design, with slide-on case could have been even slimmer and more durable. Fit is also nice, but also not perfect, phone is just a little loose in case, not noticeable right away until you play with it.
kolyan said:
Case is good, very slim and feels good in hand, not perfect like other Seidio products. Like the review states, the case is NOT slide-on which sucks. I dont know why they used clip-on design, with slide-on case could have been even slimmer and more durable. Fit is also nice, but also not perfect, phone is just a little loose in case, not noticeable right away until you play with it.
Click to expand...
Click to collapse
After waiting around for the SGP Slider, I was also hoping this would be a sliding case.
I did get to hold a Captivate with the Innocase II, which is a slider, and the fit was pretty awful. It moves around a ton compared to this front-back type. I guess I'll take this style and more precise fit over slider with a bad fit.
Is it the bump on the Vibrant that is the main issue with a slider?
I was a bit let down to find this was a snap on the front/back design.
new coupon good through Sunday: MIX15
buy 2 products and get 15% off, free shipping for 2010
ordered one today from ebay for 18 and free shipping. thanks for the review and pics. Your pics make it look like it has a nice clean design in front.
djjeesh said:
ordered one today from ebay for 18 and free shipping. thanks for the review and pics. Your pics make it look like it has a nice clean design in front.
Click to expand...
Click to collapse
it is nice and clean. my nexus one case fits better, but they probably had to make it clip-on design i guess for Vibrant bump
Nice review! I can't help but feel like Seidio threw this product together in a hurry, after they realized there are people with Vibrants. It just looks cheap compare to their other offerings.
Just got it. initial impressions:
1 feels great in the hand. Looks good too.
2 I absolutely hate how easy it un-snaps.
3 I want to know their return policy till they have a legit case like the ones I am accustomed too from seidio.
4 it's much more difficult to press power now.
EDIT: okay, found out how to do the return, just waiting to hear back from them.
Hi,
I just got my SGS2 and wanted to order a case for its protection so I took a look around and found this from Astrobile. ( Google it, forum doesn't let me to post url ) It's pretty awesome on paper, cause i didn't get it yet, but I looking forward it is indeed cool.
They have a 1 plus 1 event now, so you can get 2 for a price of one. They also include 2 screen protector with it. It's Made in Korea.
Why is it Hybrid? Its made of plastic, but at the back of it there is a metal plate which "make your device looks slimmer". Imo it could also helps keep your device cooler. My SGS2 is getting real hot when playing constantly for an hour or more.
Im already excited about it, can't wait to get it! I will update when i get them, they said it will take about 10 days.
And the best of all, there is free shipping to worldwide. Of course you can take a Express Shipping, but that's not for free...
Arrived!
Hello!
As i promised, i will write a mini-review according to my first few impressions about the case when i get it, so here you are!
First things first, it has arrived fairly quick according to it was a free shipping. +1!
It has came in a pink plastic bag, nothing special. The package of the case itself is nice, suggests quality, +0.5!
The first problem face me when i actually opened the box and got the black case in my hands. I noticed it is kinda thick,-0.5, and has some shimmering material mixed in the black TPU, -1!!!. This is weird, but must be the Korean taste for beauty...OK.
The next thing I didn't like about thie case was it thickness, ok I already mentioned it, BUT the holes for the buttons are also that deep that they're hardly accessible. They could have made some "case-buttons" or I don't know the expression for that. -1!!! Maybe something like on this one.
The metal backplate also has some color transition from black to silver (mostly silver for a "black" backplate), and I don't like it. I have to give a -0.5.
Alright, enough of the CONs, let's see some more PROs. This case is not that bad at all. Its Sturdy enough, but still flexible so I can believe my phone is protected from small height drops (if not landed on the screen - tho the case has some edge which laps over the phone, so if you turn it face down, your screen won't be scratched, also the screen protector is there.) So this worth a +1! The touch of the material is good, less slippy then the phone naked, but still not as good as it could be. (Maybe my hands are just to small for such a huge screen and while im tryin to reach the other end of the screen with my goofy fingers it just wants to slip off of my hand. - So I won't give penalty on this.
The matte screen protector included is absolutely superb quality! It has a really nice touch, a colors doesn't distorted and it's free of any oil, fingerprints, +1. Tho I have to mention that on the website they were talking about 2 screen protectors will be included, this is a -0.5...
And of course don't forget about the extra case included with every purchase of this model from the color of your choice (even the same your ordered originally). They have black and white with various backplates.
I won't give penalty points on this, cause this was a gift
So, the thing is it is kinda the same as the black, since it also has that crappy shimmering thing mixed into the material, but it is less visible than on the black one. Backplate is the same aswell, weird color transition...But again, it was gift. So it is OK
The Verdict:
Summa Summarum, the case has finished with a +1 in its stash. My impressions is just confused as this rating.
I like it a bit, but I don't think I will stick with it too long. For a first case it's just perfect, since my main goal is just to protect the phone, and it does the job well. Tiny imperfections like the deep button hole is a thing i could get used to by time, not really a big issue.
Next time I will definitely go for a bumper-style case which preserves my phone's slick for factor, which I love.
Here you can see some high-res pics of the cases.
Hope you found my very first review helpful! Please press the "Thanks" button! Cheers I'm off...
P.S: This is my 10th post, let's celebrate :lol:
The phone + case look rather thick on the photo's. Is the mic on the upper side not covered? There is no picture of that.
TheWizardbc said:
The phone + case look rather thick on the photo's. Is the mic on the upper side not covered? There is no picture of that.
Click to expand...
Click to collapse
Hey!
Thanks for the input! Yeah, sorry I forgot to mention that, actually I didn't even knew that is a mic also!
Returning to the topic, yeah the case also has a cut for the second mic too!
Can you please tell me what is it for?
the second mic
the second mic is use for the noise cancellation feature.
if you want a cheap and cheerfull hybrid case then look for a fake sgp neo hybrid case
if you want a more exspensive hybrid case look for genuine neo hybrid sgp cases
a fake one will cost up to £12 and usually start at about £6
real sgp cases will cost you £18-£22 and no less
iam using a fake neo hybrid at the minute as i broke my genuine one and its a pretty good case for the money , it fits standard battery and 2000mah battery , its lasted a good few months and has kept the phone pristine , it covers the phone well even with the 2000mah battery
they are the best hybrid case ive found and add minimal bulk to the phone , look good , fit nice , protects the phone from drops and if you buy a fake one you can get them for pretty good prices
That 'shimmering' effect looks nasty. It's good that you get a second case though.
i think there are better cases out there and at cheap prices, but in the bright side it does look nice.
Has anyone used a ruggedized case? I bring my tablet EVERYWHERE and need something decent to protect it and was thinking about the Gumdrop cases. Any suggestions?
I use the Gform Extreme Sleeve 2 for extra protection. It says it fits the Ipad but I can confirm that it will fit the galaxy tab even with the stock book case on it. This is the best combination of protection and comfortable usability I have found.
It is kinda spendy but I bought both cases on ebay for less than retail and the samsung book case is definitely not necessary.
http://g-form.com/product/ipad-extreme-sleeve2/
If you don't think this case is beefy enough check out their torture test videos online.
http://g-form.com/technology/
Dose the gumdrop have a built in screen protector like the otterbox?
Sent from my PG86100 using XDA App
streetrider nick said:
I use the Gform Extreme Sleeve 2 for extra protection. It says it fits the Ipad but I can confirm that it will fit the galaxy tab even with the stock book case on it. This is the best combination of protection and comfortable usability I have found.
It is kinda spendy but I bought both cases on ebay for less than retail and the samsung book case is definitely not necessary.
http://g-form.com/product/ipad-extreme-sleeve2/
If you don't think this case is beefy enough check out their torture test videos online.
http://g-form.com/technology/
Click to expand...
Click to collapse
Always been curious about these cases that look like tires. Is there any advantage to this over an equally-thick material without the pattern? It seems to me like the tread on this would actually make it more likely to be damaged, not less. There's thin points (for puncture or pressure), and its easier to bend. And though there's probably a small difference in weight (though minimal; the heavier outer coating is larger than if it was flat), I can't imagine the tread makes it more fun to put into or take out of a bag. I've never used one though so I'm curious if there's something I'm not considering.
slack04 said:
Always been curious about these cases that look like tires. Is there any advantage to this over an equally-thick material without the pattern? It seems to me like the tread on this would actually make it more likely to be damaged, not less. There's thin points (for puncture or pressure), and its easier to bend. And though there's probably a small difference in weight (though minimal; the heavier outer coating is larger than if it was flat), I can't imagine the tread makes it more fun to put into or take out of a bag. I've never used one though so I'm curious if there's something I'm not considering.
Click to expand...
Click to collapse
There's something you've not considered. I think the design helps with the shock displacement. Maybe not, but it's what I figure.
Have you watched the videos? This is one a$$ saving case. LOL
If you're as tough on your tab as in the videos you crazy, but then again, stranger sh!t has happened on accident.
Sent from my GT-P7510 using one stinky finger.
I have one and love it. I got one for my daughter's kindle, too. It does have a built in screen protector but I didn't install it for my case (affects screen responsiveness and feels crappy). The screen is protected from being recessed behind protruding, reinforced edges, so if i drop it it won't break anyway. Also, the case prevents accidentally hitting the power button, which used to drive me crazy. I take my tab to work everyday...get lots of compliments on the case. The material and ridges let me sit it on my couch or lap and not slide out of position. They also feel nice in the hands. I have an otterbox defender case for my evo4g. That's a great case, but I recommend this grippier type of material instead for a tablet. My phone case lets me slide in and out of my pocket easily, but i want traction with my tablet case. I also tried one of those folding tablet cases, but they seem ridiculous to me.
I have the white gumdrop case for my tab 10.1. As far as protection it is great. The corners are reinforced and it has a built in screen protector. You will have no doubt that your tab is very well protected inside this case. It also offers a LOT more grip and security in your hands. The only downside it that is easily doubles the thickness and weight of your tab. With this case on you can easily drop, throw, bang etc.. without even a thought of damaging your tab.
I love my Gumdrop! I wrote an in-depth review if you want to check it out, with more pictures and details then you can shake a stick at, lol.
http://romrepo.info/viewtopic.php?f=50&t=664
I got a gumdrop case shortly after I got my tab 10.1, Love it. The silicon cover is very thick especially on the corners, the frame is solid and fits on the tab well, the cover and frame fit together very solid, and the screen protector is actually pretty good. It makes the whole setup look very clean, and my touchscreen is still very responsive with the gumdrop screen protector AND a static adhesive screen protector on.
tldr gumdrop A+
slack04 said:
Always been curious about these cases that look like tires. Is there any advantage to this over an equally-thick material without the pattern? It seems to me like the tread on this would actually make it more likely to be damaged, not less. There's thin points (for puncture or pressure), and its easier to bend. And though there's probably a small difference in weight (though minimal; the heavier outer coating is larger than if it was flat), I can't imagine the tread makes it more fun to put into or take out of a bag. I've never used one though so I'm curious if there's something I'm not considering.
Click to expand...
Click to collapse
Sorry for the delay, I am working on my capstone project for an EE degree and I have not been on the internets for fun since sunday.
I cannot say I would be able to point out any major advantages between the current design and one that is equally thick throughout, I would probably guess weight and cost. I believe the case is made of a fancy foam that stiffens on impact and does not seem like there is much of an outer coating over the foam but I have not yet cut into mine to find out.
The "tread" really has not caused me any problems getting this into or out of my backpack. The case is not frictiony like rubber but not so slippery that I am afraid to drop it when I carry it around either. I would say they found a happy medium between fly paper and a greased watermelon.
Overall I am very happy with this case and I recommend it to anyone who needs some heavy duty protection. I am even considering buying one for my laptop!
I got mine today left the screen protector off I have a zagg on mine super case I'm going to order one for the wifes Asus transformer
+1
I got my Tab last Fall and a Samsung Book Case shortly afterward. I had looked at the Gumdrop case and thought it'd be good to have, but didn't pull the trigger. That was a big mistake.
My son decided to grab the Tab from the kitchen counter & play games on it in the family room, but the dropped it on the tile floor before he got to the couch. I ended up with a $200 repair bill for a new screen. Needless to say, I had a Gumdrop waiting to be put on the tablet as soon as the repair was complete. This thing feels sturdy & strong. I just wish I had bought the case when I first saw it. I'd be $150 richer.
Got my gumdrop last week and really like it wasn't to sure bout the screen protector at first but its very responsive. Def worth the $.
Sent from my GT-P7500 using Tapatalk
I ordered one yesterday and then saw this thread. I checked this forum for case info before but didn't see the gumdrop case mentioned. I found it googling rubber corners galaxy tab 10.1.
Great to see positive reviews. Two concerns I have are:
- could the rubber case interfere with the wifi antenna?
- could the battery/electronics get too hot in it under normal conditions?
I notice that when you put your hand on the corner near the power button, the back and front get warm with no case. I imagine the glass acts as a heatsink. If you feel around the warm corner it doesn't spread to the rest of the glass. When I get the case I'll see if the warm area seems bigger.
In the manual it recs use in the temp range O-45c. I searched to see if 10.1's have overheating issues and I see anything to indicate that.
I've had the Gumdrop case on my Tab for about two months now & I've never had overheating issues.
Fat Tires said:
I've had the Gumdrop case on my Tab for about two months now & I've never had overheating issues.
Click to expand...
Click to collapse
Cheers, good to hear.
I just read somewhere that someone said that a silicone cover on their phone caused wifi loss, but others tested theirs and didn't have any loss.
I haven't noticed a decrease in my wifi reception. It works the same at home, the office, & in public spots like the coffee shop.
I don't think you'll notice any negative issues with the case other than added bulk & weight. Those are a fair trade for the better protection you'll get from the case.
Great, I'll do a proper test when I get it. I should try it with my Samsung Book Cover case as well.
I figure the thickness and security of it might make it easier to hold for long periods despite the weight. I like the idea of being able to grip it by the raised edge while carrying it, and I think I'll now have the confidence to bring it places and let other ppl actually play with it!
It looks like it might even survive a fall down stairs which even iBallz wouldn't
Hey NexVision
Which Gumdrop case fits your P7500? They don't list it on the site and it would suck to get a case and the buttons don't line up. Everywhere I look there seems to be a hundred different model #s (for each carrier, 4G and wifi only etc) and nothing seems to list which models are similar.
I want to chime in here with nothing more than +1 to everything positive mentioned here and No, I haven't had any of the problems asked about in this thread either.
Just thought I'd share some thoughts and pictures of a new case I got (I am a bit of a case junkie... usually end up with 10-15 cases per phone). Typically I either wouldn't be the first to post about a case (so I don't bother) or I don't feel strongly enough to share. I didn't see anything about this case, though... so here goes.
Link: http://www.amazon.com/gp/product/B0073YAAVK/ref=oh_o02_s00_i00_details
Various colors are available.
Notes: My device is the Verizon/LTE variant. This is a 2 piece case (black silicone base and red fishbone part).
Looks: I really think the case looks great, the pictures below won't do the colors justice but the black is a very nice matte black and the red is a very cool shade. The design is appealing, of course, or I wouldn't have purchased it... heh.
Fit: The fit is nearly perfect (might actually be perfect, this is the first time I'm ordering this style of case). One of the... ribs has a teeny tiny slight gap between it and the black base. It is not highly noticeable and I couldn't capture it well in a picture... but it's there.
I don't know if this is related to my phone being the VZW version.I don't know if this gap will go away as the case "settles in" since it is pressed down easily and doesn't feel too tight.I don't know if the case will fit with the extended battery, but since I have the extended battery at home I will test it out and report back.
Feel: I really like the feel of the red part on my hand when I'm holding it. It's not any extra grip or anything, but it is comfortable. The side grippyness is sufficient to not be slipping out of your hand, but it's not as grippy as many other cases that have a more textured design.
Function: The lip is sufficient to protect the screen when face down. The only thing I don't really like about the case is that the button parts aren't super noticeable by touch. Don't get me wrong, they work perfectly and you can feel them just fine when you are trying to, but when I am not paying attention I find myself not being certain where they are for a moment or two. I will probably get used to this, though.
Hope that gives everyone the info they're interested in... if you have questions, feel free to ask.
Thanks for the write up and pics. That case looks awesome. Curious if it would fit with the extended battery. Hope to hear back from you about it.
Sent from my Galaxy Nexus using Tapatalk
I tried it with the extended battery...
The silicone part fits perfectly, the fishbone part is a little close but does fit too.
The... spinal parts at the top on the back are slightly raised. Just a bit, only an issue if you are pretty nit picky... But it definitely fits and the clips/ribs and top/bottom fit perfectly.
Happy to confirm that the slight gap on one of the ribs has gone away over night. The case fits perfectly now (regular battery). Still fits good, but not great with the extended battery (might improve if left alone over time).
Thanks again. I might check into getting one of these on payday. The price isn't too bad even if I end up not liking it.
Zomb!e said:
Thanks again. I might check into getting one of these on payday. The price isn't too bad even if I end up not liking it.
Click to expand...
Click to collapse
No problem... good luck if you decide to buy it, hope you enjoy it. I myself am a case junkie. I've only had the Galaxy Nexus for 2 weeks and have 6 cases and I still have 20 or so for my last phone (Epic 4G Touch).
How is the silicone? Is it a dust/lint magnet and is it a chore to get out of medium to snug fitted pants?
redrapt0r said:
How is the silicone? Is it a dust/lint magnet and is it a chore to get out of medium to snug fitted pants?
Click to expand...
Click to collapse
No issues getting it in and it of pockets (even the tighter "cell phone pockets" a couple of my pants have).
It does acquire a bit of dust like you'd expect, but FAR less than most silicone cases I've had (guessing because a lot of it is covered/broken up by the fishbone part).
I tend to be pretty nit picky and with this case I do not feel the constant urge to clean it.
How "protective" would you say it is?
Just ordered a nexus and am looking at cases my primary concern is protection, although I want a cool look too.
How do you think this would compare to come of the other cases in terms of protecting against drops? I figure a self-described "case junkie" might be the person to ask this sort of comparative question to
Ok, so this is all just my opinion... I'm not dropping my phone on the ground to support this, lol.
Both pieces (the silicone case and the red fishbone that locks it into place and secures it) are pretty secure and well made. The lip around the face is a good size (not so tiny that it is insignificant and not so big to cause usage issues).
I won't sit here and pretend I have a rating system for this stuff, but I have some cases that feel like they won't protect anything beyond it sliding around the desk or a gentle fall onto some clouds/carpeting and some cases that feel like they will do their drop and protect it from a moderate drop and fall. This case falls into the latter/better group.
I like the appearance, but not so much that I'd use it if it was a piece of crap. Thankfully, it seems well made to me.
Woah
what struck me on first glance is the design!
Its quite eye catching
I'm just not sure if it is durable...
This look good. I bought one
Sent from my Galaxy Nexus using Tapatalk
Anybody who is interested in the Bear motion cases from Amazon:
http://www.amazon.com/gp/product/B00BVWJ94E/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1
These are very nice thin and light hard case that will give light protection for your phone while still being stylish. My two case came in the other day (Black/Gray). I have not receive my One yet but the cases feel real nice in the hand. So if you are looking for a thin and light case, give these a shot.
Pics taken with my Nexus 4:
smooth3d said:
Anybody who is interested in the Bear motion cases from Amazon:
http://www.amazon.com/gp/product/B00BVWJ94E/ref=oh_details_o03_s00_i00?ie=UTF8&psc=1
These are very nice thin and light hard case that will give light protection for your phone while still being stylish. My two case came in the the other day (Black/Gray). I have not receive my One yet but the cases feel real nice in the hand. So if you are looking for a thin and light case, give these a shot.
Click to expand...
Click to collapse
Hey smooth,
Thanks for the pics - are these textured on the inside? It seems they could cause scratching to the back and sides on the phone while being shifted around.
D3luSi0n4L said:
Hey smooth,
Thanks for the pics - are these textured on the inside? It seems they could cause scratching to the back and sides on the phone while being shifted around.
Click to expand...
Click to collapse
Yes they have the same finish as the outside. It's hard to explain but it feels really smooth so I doubt its going the scratch the phone.
It actually feels a bit smoother on the inside. It's barely discernible, but it's there. My fingertips are well tuned, thanks to my woodworking.
It's a fantastic case, but offers almost zero screen protection. If that works for you, $6 from Amazon (US) can't be beat.
smooth3d said:
Yes they have the same finish as the outside. It's hard to explain but it feels really smooth so I doubt its going the scratch the phone.
Click to expand...
Click to collapse
CocheseUGA said:
It actually feels a bit smoother on the inside. It's barely discernible, but it's there. My fingertips are well tuned, thanks to my woodworking.
It's a fantastic case, but offers almost zero screen protection. If that works for you, $6 from Amazon (US) can't be beat.
Click to expand...
Click to collapse
Appreciate the responses, may have to pick one up.
Picked up a green one for 5.99 with Prime shipping. I like it a lot, the texture is real nice, and it is a real tight fit so I dont think it will be moving around in the case, I have taken it on and off a lot in order to show people my nice aluminum phone., and have yet to notice any scratches though you do have to be careful taking it out of the case, as I said it is a tight fit. But Overall I really like the case, it really does offer almost 0 protection. It looks nice and feels nice. My one issue with the volume buttons are a bit difficult to press with it on and it kinda feels like it is something I could make if I had a 3d printer, very thin. Someone who is looking for a real protective case can look elswhere, this is almost all about style.
I just got my phone and this is how it look like in the black case:
Sorry for the poor lighting!
Very nice! I just ordered the gray one from amazon because my poetic borderline case is taking forever to ship. Hopefully this case will give just the right amount of protection.
Sent from my HTC One using xda app-developers app
I ordered some myself the other day. Even though they haven't arrived yet, they look very similar to the ROCK Quicksand cases they made for the Galaxy S3, and HOX. I'm just not digging their logo on the back... I'll probably remove it somehow.
bought the blue one. coming in on monday
great thin case
I really like this case. The texture is superb and sublime. Just enough to barely feel. There are just a couple of things that could be improved to make this case perfect for me.
1) The lip at the corners is slighly recessed and the corners should wrap around the phone a bit more. Almost every time I drop a phone it lands on a corner and with this case it's possible the aluminum could take the impact.
2) Lose the SIM tray cutout.
3) I'd feel better about putting the phone face down if the lip was just a half millimeter higher.
4) Power button cutout isn't quite cutout enough. It should be like the usb cutout which is perfect.
5) Volume cutout is just a bit 'sharp'. I wish the edges were smoothed a bit.
That said, these are nitpicky items and more like suggestions I guess. I would endorse this product.
Galaxy S4 cases
New to the forum. Anyone has suggestions regarding cases for Galaxy S4? There are so many choices out there. Just got confused easily.
I used to have a Bear Motion wallet case for my note and loved it. They seem to have the same wallet case available for S4.
But, I really want to have something simpler this time around. Any suggestions for a snap on case?
Same quality and fitment as Incipio and Spigen @ only $5.99... You can't beat em!
I have the Bear Motion case in grey, and yes, it's definitely a nicely fitted, slim, grippy case. However, the rubbery texture DOES begin to wear off with time. The coating on the edges on the front corners of the case have begun to wear off, revealing grey plastic underneath. Fortunately, it does blend fairly well so it isn't much of an eyesore. Hopefully you'll be able to see what I mean from the attached picture.