[Ask Your Questions Here] Questions & Answers for Epic 4G Users - Epic 4G Q&A, Help & Troubleshooting

CLICK HERE TO GO TO THE WIKI
I have decided to open a Questions and Answers thread on this section of the forum. This is a good way to keep the number of new threads with questions down to a minimum, which will make new threads essentially for people that are contributing to the Samsung Epic 4G. This includes, but is not limited to, people that are providing the following:
- Roms & Kitchens
- Programs & Apps
- Fixes & Tweaks
- Skins & Themes
- Tips & Tricks
I would like to request the help from other members to keep the thread in order and in check. This will have the added side effect of creating an ever self updating knowledge base that will far extend the content of the Wiki. This will in turn save us from having to answer the same question a billion times...
Please refer to the Wiki first before asking any questions though! It can be located here: http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S/SPH-D700
CLICK HERE TO GO TO THE WIKI

Any idea when the OTA push for2.2 will start?

jg187211 said:
Any idea when the OTA push for2.2 will start?
Click to expand...
Click to collapse
Unfortunately, we don't have anyone in the community who has inside access to that information. Some of our members are affiliated with Sprint, and so have slightly more reliable rumors, but even their sources have thus far been wrong if they quoted a specific date...
So I hope you understand that I'm not being a jerk when I say, we won't know until it actually happens (and this will probably always be the case)
That being said, this most recent leak (DK28) seems stable so far IMO, so it could potentially become our official update

ok im a total noob to all this stuff. i followed the guide to update my epic to 2.2. the problem is, that the camera, gallery, and a couple other apps dont work. Can someone help me? Should i go back to 2.1, if so, how do i do that?

EDIT: Angry rant removed, thanks to the mods for a quick response (and to the member who's post was removed: no hard feelings, I hope you understand)
Just remember to read before posting, to make sure your post will be relevant and not redundant
jayzn210 said:
ok im a total noob to all this stuff. i followed the guide to update my epic to 2.2. the problem is, that the camera, gallery, and a couple other apps dont work. Can someone help me? Should i go back to 2.1, if so, how do i do that?
Click to expand...
Click to collapse
Whenever flashing a ROM using either recovery, it's always a good idea to wipe the phone (as in factory reset - I'm not referring to wiping the cache or the dalvik cache, although both steps are also usually recommended)
If you used the odin method described in this thread: http://forum.xda-developers.com/showthread.php?t=861213
then you might have flashed the wrong tar - DK05 and DK17 both had the camera problem, make sure you have the DK28 file.
If you have the right tar, then you could have an incomplete download... I doubt that though, when that happened to me, my phone wouldn't boot at all. But you might want to redownload the tar just to be sure (double check the filesize after it finishes and before you flash, if it seems too small then it messed up again)
That's the best general advice I can offer, but if you'd like to provide more details about the method you used (especially a link to the guide you used, if it isn't the one I provided), someone here might be able to identify where you're going wrong

i followed the instructions from http://forum.xda-developers.com/showthread.php?t=861213. i didnt use odin, i just used the .zip method. it took me a lot of tries cause i kept getting errors. the second mirror link worked for me, but like i said, my camera, gps, gallery and some other apps dont work.
oh and everytime i try to flash again, i get the error.

It sounds like you're either starting from the wrong rom or not wiping the phone before flashing the zip. All of the zip updates I have seen require you to start from DI18 stock (root an clockwork seem to be okay in my experience, all other mods must be removed) - if you have installed any custom roms, your best bet is to follow the odin method using the stock DI18 tar - so you may as well just skip the zip methodand odin to the stock DK28 tar
And you absolutely must wipe the phone (again, factory reset - I suspect many people are just wiping the cache and/or the dalvik cache).
Sent from my SPH-D700 using XDA App

Odin flashing
I've got a quick question. I'm looking to move to a build using the DK28 information release and it requires that I update the pit and modem files on my phone using Odin. Do I need to flash a 2.2 rom right away or am I safe to boot into my current rom first?

KaiXXV said:
I've got a quick question. I'm looking to move to a build using the DK28 information release and it requires that I update the pit and modem files on my phone using Odin. Do I need to flash a 2.2 rom right away or am I safe to boot into my current rom first?
Click to expand...
Click to collapse
Are you doing the strictly odin method (full froyo in a tar file)? Or an update.zip?
The odin method *should* include the modem and everything (and you use the updated pit in the same process) - you'll have to read the particular thread that you got the download link from, but I haven't noticed any odin tar files that required the modem separately
For the update.zip method, I don't know if it matters whether you flash the modem before or after applying the zip through recovery - I don't think either one overwrites the other, but that's a part of the process I can only guess about. But regardless of when you odin flash the modem, that's when you'll use the new pit file (the same as the odin-only method above).
As far as I know, the primary difference is that the update.zip doesn't inherently overwrite user data (but you'll probably have broken programs that FC all the time, which means a wipe is necessary, making this somewhat null). I prefer the odin method because it is a fresh flash of the entire system (I usually let it repartition as well - no one else has posted about that feature so I have no idea if it's a fluke that it hasn't given me problems)
Hope that helps

which is the best
so i have updated to dk28 froyo 2.2 i like battery life and performance can anyone offer info on which is the best rom for me or just some insight on which rom is the best overall

How do I stop running applications from starting every time I restart my phone?? I have the start up auditor but for some reason everytime I restart my phone the apps I have disabled keep restarting themselves and I have to go into the running programs and disable them manually. WTH?? Doesnt programs constantly running in the background kill the battery life?? How do I disable apps from starting?

youngpro83 said:
How do I stop running applications from starting every time I restart my phone?? I have the start up auditor but for some reason everytime I restart my phone the apps I have disabled keep restarting themselves and I have to go into the running programs and disable them manually. WTH?? Doesnt programs constantly running in the background kill the battery life?? How do I disable apps from starting?
Click to expand...
Click to collapse
How I understand it, especially with Froyo, you shouldn't have to kill programs in the background, if said 'background' process or service is working normal or efficiently. I still kill the DRM process when I reboot my phone, and not sure if it's still causing drain issues.
Also (someone else confirm this), I believe that constantly 'killing' certain background processes actually uses MORE battery, since it has to constantly restart itself. I've had a much more stable device *not* using auto killers, and just sniping one here and there that I know to cause drain.
Some reading material on GC, tho, in regards to memory management

Ignore me!

devo52 said:
so i have updated to dk28 froyo 2.2 i like battery life and performance can anyone offer info on which is the best rom for me or just some insight on which rom is the best overall
Click to expand...
Click to collapse
A lot of it is personal preference - this early in the game, the primary differences between the roms are going to be mostly cosmetic. So for now, the best advice I can offer is to try each of them and decide which theme you like. Regardless of how you upgraded, you had to use odin, so you have succeeded at the most difficult step of the process - and odin can bring your phone back to life if something goes wrong, so it's an invaluable skill to have.
In the meantime, keep watching the threads (quietly, unless you have a question that hasn't been asked already - we're working on cleaning up the forum to make it easier for everyone to find answers... but I digress...)
It's too early to be sure of any of the fixes out there - we have at least three separate fixes for the GPS issues; some people find success with one, others with another, and a lucky few don't need the fixes at all... so in summary, we can't say which is better or worse just yet, stay tuned and decide whether you want to experiment on the bleeding edge, or wait for these things to be stable and thoroughly tested.
And if you have any doubts, just stick with the stock DK28 for now

tl;dr, questions in BOLD.
Okay, after spending the entire night scouring the internet/this forum and starting from absolutely zero-knowledge about the Android OS, I managed to update my Epic to 2.2, and root the phone. Now, I'm kinda stuck as far as customization goes. I see all these cool skins and battery life mods and stuff, but they don't exactly offer any steps as to how to install them. Since I don't exactly know what file-types do what, I'm kinda shooting blindly at trying to update/install something "custom" onto the phone. So, my question(s) is/are:
What does the ROM do?
What does the ROOT do?
I know the root basically "unlocks" your phone, but that's all I know. The process of customizing the phone still remains a mystery. (that's the problem with following step-by-step instructions, rather than actually knowing what you're doing.)
I also don't understand the purpose of flashing a phone. Flashing, in my experience is to update something, like say a BIOS. But that sets the system back to square 1 as far as all settings go, in this particular example.
If I flash, with say Odin, after having updated to DK28 and "rooting," won't this make all the "customization" that I've done prior basically 'null' because I've just flashed the phone into a blank-state?
Sorry if these are questions easily answered by searching, but I just spent my entire sleep-cycle trying to find the answers to these questions, and managed to only get so far. I look forward to the answers On another note, I am now EXTREEEEMELY pleased with my phone. Before this evening, I was just the regular, old run-of-the-mill enduser. I liked the cool built-in customizations and all the apps and what not, but never dreamed of being able to customize my phone to THIS EXTENT. So, now it's something I'm very interested in doing..it makes my phone truly mine.

zdavidi said:
What does the ROM do?
What does the ROOT do?
Click to expand...
Click to collapse
Did you see the link to the Wiki in the original post of this thread? That's where I started when I first got here, it helped me understand the basics.
zdavidi said:
If I flash, with say Odin, after having updated to DK28 and "rooting," won't this make all the "customization" that I've done prior basically 'null' because I've just flashed the phone into a blank-state?.
Click to expand...
Click to collapse
It depends on what you flashed with Odin. If you only flash a modem file, then your customizations and apps are untouched. If you flash an entire ROM in "tarball" form then not only does it re-write the modem but it also overwrites all user data. Think of the latter as resetting the phone to stock and works even if you cannot boot up.

When can we expect a custom Kernel with netfilters for wifi tethering?

n00b question.
If an SDK version is released (say, like, Gingerbread today), does that mean chefs could take it and cook up a ROM for ANY phone (say, like, the Epic)? Or do they need something else to do that?

Remove Touchwiz Launcher (consequences?)
Hey-- I'm using Quantum 2.0.0 ROM, and I never use the touchwiz launcher. Does anyone know if it's safe to just remove the apk? (TouchWiz30Launcher.apk) or is there other functionality tied to it?
I use LauncherPro, fyi.

Please forgive my ignorance... I've searched the forums, looked at the wiki...
I use titanium backup and am now running the DK27 froyo build by noobnl. My question... How do I restore my e-mail accounts to the phone everytime without having to re-type them in? I've been flashing a rom every other day on average since I got the phone and it's getting REALLY old.

Related

[ROM][CDMA][VZW]KhasMek's K-leanMod v3

(Yes I know clean isn't spelled with a K)
Well, I've been working on my personal ROM for quite a while now, since there isn't much out there for us VZW users, I've decided to share. This might work on sprint, but I haven't tried. Sprint users should stay away unless they really know what they're doing. As normal, it's not my fault if you fubar your tab by flashing this or if zombies come and speedhump your cat. You've been warned.
Preamble
1. Don't ask me on how to install koush's recovery, that's what his thread is for. Laymen's terms- Did you do THIS? If you did, you're good to go, if not. do it.
2. I am not going to teach you how to use, or set up the applications that you need to use/flash this. I have included links to everything you need to know, just click and read for a second. If you are not willing to put out a little bit of effort to better your experience with your Tab, I am not going to waste even more of my time that could be dedicated towards making my ROM better. Also, if you aren't willing to give yourself the fundamental knowledge required for flashing this and something goes wrong, you will then have the required skill to fix it, instead of blaming me for bricking your Tab. I don't need that. I am willing to support my ROM and help with some confusion, but if you want me to do everything for you- lo siento.
About This ROM
There's not too much to say about it. It's DJ11 with almost 100MB of bloat ware, Verizon/Samsung crap and worthless other nonsense pulled out and the good bits updated with parts of the EURO updates/dumps. I have also done some other mods and optimizations.
Features
Updated Samsung apps from newer GSM ROMS! (The only way you can currently experience the updates on your CDMA device)
Deodexed
Zipaligned
Ad blocking hosts
Screen density of 180 (you can fit more stuff on the screen. Change with build.prop edit or LCD Density changer)
Transparent Notification bar
Gingerbread launcher
Minimal Touchwiz integration
Custom notification and ringtones (a la The PHJC)
More! (Really, there is more, but I can't think of it right now, I'll edit this post as I remember)
Installed Apps
3G Mobile Hotspot (wifi needs it to work)
Browser
Calendar
Camera
Chrome to Phone
Contacts
Email
Gallery
Gmail
Google Search
Latitude
Maps
Market
Connected Music Player (from Motorola, it's sweet)
Navigation
Places
Spare Part
Superuser
Talk
Task Manager
Titanium Backup
Video
Voices
Voice Search
Youtube
Removed
Verizon Boot Animation (That's why all you see is a black screen on first boot, just wait. I'm working on a custom one right now.)
Touchwiz Launcher!!!
Accessibility features. Note: you can still manually download them from the market.
lot of other crap, I can't remember, blockbuster, games, it goes on. I pulled out almost 100MB of apps, unneeded audio files, apps and such.
Changelog
v3 - Installation Update
Not much has actually changed about this ROM, I started to theme it, I stopped, I need to replace the zips with the stock again
CWM flashable zip install method has been uploaded for ease of flashing
v2 - Application Update
Lots of apps integrated from the GSM JMI Dump from Rotohammer. As usual I have deodexed and zipaligned the apks. There are some nice updates in the task manager, Contacts, Calendar, email and several other apps.
v1 - Initial Public Release
I was having some core issues with previous versions, but I've been running for well over 12 hours now without a problem.
If people paying for the data plans would report back to confirm all wireless cell activity still functions, that would be great (I only use wifi, but my VZW location service still works, so your data should too).
Known Issues
The notification/ringtones are duplicated in the selection windows, don't know why but there are no redundant files.
You will get core FC's and FC's in contacts, calendar and email until your Twitter/Facebook/Gmail accounts are fully synced, this is normal. Just give it a couple hours to fully sync (or turn up the sync interval to speed up the process).
If you are having any issues with the ROM loading on the first boot (it shouldn't take more than 4 minutes at the black screen) Turn the Tab off by holding down the power button until it powers off (9 seconds or so), Boot into recovery, select advanced --> reboot recovery. Once the secondary recovery loads, select format/factory reset and reboot.
Set picture as lockscreen wallpaper doesn't work.
Plans
I don't know, it's fast right now. Probably just more streamlining, accurate battery mod, shutdown options and a theme are all on the list too. This is really just to get me through until I finish some other things. You can make requests, but don't expect me to listen to them. I'm just sharing the ROM I've made for myself, so it is, and always will be, configured the way I like it. There's always the random good idea though. Let me know if you find any serious bugs too please.
Installation
Download the VZW bootstrapper or manually CWM your Tab (instructions HERE)
Download ROM
Factory Reset (BACK UP YOUR DATA FIRST! Should only be necessary if coming from stock)
Boot into recovery mode (power off, power button + volume up)
Select Install zip from sdcard
Select Select zip from sdcard
Browse to the location of the ROMs zip
Select yes and wait for the flash to complete
Reboot
Extras
Metamorph to change status bar black - DOWNLOAD
Metamorph to change status bar white - DOWNLOAD
Metamorph to change status bar transparent - DOWNLOAD
Note: Metamorph can be downloaded from the market HERE or if you prefer ninjamorph HERE.
Thanks
jt1134, Adrynalyne, rotohammer, TCMAN and everyone in IRC as usually is great help.
Lastly, if you like my work, donate to me so I can donate money to devs that make my world easier (and therefore yours).
Great Khas.
Had an issue with the Market, even though you said it was in the rom. I had to use unyaffs on my CWM backup and pull the Vending.apk there and then push it. Otherwise I'm loving it. Great job
Awesome. We have been waiting for someone to step up for us VZW guys. I will be flashing tonight. Thanks man
Im getting alot of fcs when adding a gmail account. Im not sure. Why.
Sent from my DROIDX using XDA App
Two Quick Questions
Hi Guys, I have my tab rooted but that was the extent of my knowledge. I apparently am unsure what this means exactly.
Can someone explain how to do this - YOU MUST HAVE AN EXT4 FORMATTED FILE SYSTEM TO USE
Can someone walk me through the steps of how to - Flash Via Heimdall
Thanks for this..
@ Boushh ,
I have 3 VZW Tablets...funny I got them all for Christmas Gift from One Vocal Wish at Shopping center with my Friends...LOL
I am glad to Try out your ROM, test bugs and other stuff!!
If you can just Post a Descriptive Instruction "How-To" step by step short and brief understandable, will be AWSOME!! All I care is IT Works!! and Functional 75% of Time it is ON!!
andermk said:
Hi Guys, I have my tab rooted but that was the extent of my knowledge. I apparently am unsure what this means exactly.
Can someone explain how to do this - YOU MUST HAVE AN EXT4 FORMATTED FILE SYSTEM TO USE
Can someone walk me through the steps of how to - Flash Via Heimdall
Thanks for this..
Click to expand...
Click to collapse
The easiest rout for you would be to download and install the "Verizon Tab Bootstrapper" (it costs a buck, also, not my app) from the market onto your tab. that will convert the necessary partitions to ext4. Alternatively you can follow the method to do it manually HERE
ekoandrew said:
@ Boushh ,
I have 3 VZW Tablets...funny I got them all for Christmas Gift from One Vocal Wish at Shopping center with my Friends...LOL
I am glad to Try out your ROM, test bugs and other stuff!!
If you can just Post a Descriptive Instruction "How-To" step by step short and brief understandable, will be AWSOME!! All I care is IT Works!! and Functional 75% of Time it is ON!!
Click to expand...
Click to collapse
No to come off as rude or anything, but I do have instructions on the first post. They are pretty much all you need, so what exactly are you not getting or would you like explained more in depth? Once I discover this I can update my instructions to where it would be more helpful for some of you.
Beginners Terms
No to come off as rude or anything, but I do have instructions on the first post. They are pretty much all you need, so what exactly are you not getting or would you like explained more in depth? Once I discover this I can update my instructions to where it would be more helpful for some of you. [/QUOTE]
Hey Boushh,
When you said:
YOU MUST HAVE AN EXT4 FORMATTED FILE SYSTEM TO USE
Use Koush's recovery to get there.
Do you mean just wipe data and cache in cwm or something more?
Also when you said to Flash Via Heimdall - Im just not sure how to use Hiemdall. Can you tell me what steps to take.
Sorry for the questions and thanks for your patience.
Hey boushh, would you mind listing out all the apps that you deleted out of the /system? I just want to make sure that some of the stuff like divx, mobile print, etc is still there.
Thanks for all your hard work!
Boushh,
Thank you so very much for this. I just flashed v2 and I'm in love with my tab all over again! I do have 3g enabled, and so far it seems to be working just as well as the stock ROM. So far I don't notice any issues and it's blazing fast. I'm also using your new kernel as well. Thanks again and keep up the awesome work!
steveo11284 said:
Boushh,
Thank you so very much for this. I just flashed v2 and I'm in love with my tab all over again! I do have 3g enabled, and so far it seems to be working just as well as the stock ROM. So far I don't notice any issues and it's blazing fast. I'm also using your new kernel as well. Thanks again and keep up the awesome work!
Click to expand...
Click to collapse
Im looking for some help, im not new to this completly as ive rooted and installed many roms on my phones but im new to this for the tab...
I downloaded the bootloader off the market. After i do the bootloader do i factory reset?
My question is with heimdall....when you have the screen up with all the different options(pda/code , kernal, etc) where do you put the rom to flash it?
EDIT* I got to the clockworkmod recovery screen. Can i wipe cache and install zip from there as im used to from my phone????
Thank again as any help is appreciated
Alright guys i need some help...The tab wont get pass the "samsung" when i try to boot. The only thing i did was run the bootstrapper from the market. I can get to download mode but i cant figure out how to install the rom from heimdall...
UPDATE: In Heimdall i got "flash successfully completed" but when the tab goes to boot it wont get past the samsung screen!!
---Deleted---
jkurl said:
I really hope you did a backup cause it you did then you can go into recovery and restore your system. If not you can still go into clockworkmod and reinstall the rom from there. that is where you should have installed the rom from.
Click to expand...
Click to collapse
Well after all morning trying to figure this out...i finally got it! Had to restore to factory settings and whatnot first and then i figured it out!! Thanks again
steveo11284 said:
Boushh,
Thank you so very much for this. I just flashed v2 and I'm in love with my tab all over again! I do have 3g enabled, and so far it seems to be working just as well as the stock ROM. So far I don't notice any issues and it's blazing fast. I'm also using your new kernel as well. Thanks again and keep up the awesome work!
Click to expand...
Click to collapse
Awesome, I'm so glad to hear 3G is still working! Thanks for letting me know that. Also, I'm glad you enjoy the ROM, I have some good things in store for it too.
newtonfb said:
Im looking for some help, im not new to this completly as ive rooted and installed many roms on my phones but im new to this for the tab...
I downloaded the bootloader off the market. After i do the bootloader do i factory reset?
My question is with heimdall....when you have the screen up with all the different options(pda/code , kernal, etc) where do you put the rom to flash it?
EDIT* I got to the clockworkmod recovery screen. Can i wipe cache and install zip from there as im used to from my phone????
Thank again as any help is appreciated
Click to expand...
Click to collapse
You factory reset, as I said in the instructions, also, there is no zip. You flash via Heimdall in download mode, as I said in the instructions. The ROM will not boot unless you factory reset
newtonfb said:
Alright guys i need some help...The tab wont get pass the "samsung" when i try to boot. The only thing i did was run the bootstrapper from the market. I can get to download mode but i cant figure out how to install the rom from heimdall...
UPDATE: In Heimdall i got "flash successfully completed" but when the tab goes to boot it wont get past the samsung screen!!
Click to expand...
Click to collapse
I would use the heimdall command prompt, the GUI doesn't always work right. Also, this has no verizon boot animation, so you will just see a black screen for a second once you get past the samsung screen.
jkurl said:
I really hope you did a backup cause it you did then you can go into recovery and restore your system. If not you can still go into clockworkmod and reinstall the rom from there. that is where you should have installed the rom from.
Click to expand...
Click to collapse
No, you don't install the rom from Clockworkmod. You should read the directions before spreading misinformation in the future.
Does this rom have the bluetooth drivers fixed?
No, you don't install the rom from Clockworkmod. You should read the directions before spreading misinformation in the future.
Click to expand...
Click to collapse
So what your saying is that you can't install this rom via clockwork mod?
http://www.youtube.com/watch?v=A_qwT7rTY4E
Above is a Video, how the ROM looks like after flashed with Hemidall.
I used Frontend instead of CMD, also purchased the VZW Bootstrapper!
This is 2nd Tried with Voodoo Kernel!
Everything moves pretty well as you can see. So far no Bugs, I just missed the good old File App from original stock rom.
Deleted as well no need to argue over a Rom. Now if you stole my beer than I can see.
@boushh is the CWM for vzw you using version 3 or a later version? Got some people asking me in another forum an I want to make sure I give them the correct info.

A new guy's stupid questions:

Please be patient with me, I'm new to the entire smartphone era.
I've spent the last week or so scouring these forums deciding what I can and cannot do with my brand new Epic. What I unfortunately was unable to find were directions put into laymans terms as exactly how to properly flash your phone (I am still even unsure as to the correct terminology for many things). When I read the wiki and the forums I'm lost about a paragraph in.
It would be incredibly appreciated if any of you had tips for a new person to these forums and to this lifestyle itself. I'd love to know how to properly modify my phone without breaking it (and not feel like I'm reading a medical dictionary). When/if I do mod my phone, I'd like to know how to go about restoring it should I for whatever reason need to take it in to the extremely... helpful.. Sprint store here in my area. I'm pretty quick to learn and as I said, I'd really love if someone willing to be patient with me would explain to me the ins and outs I would need to know to take advantage of my phones capabilities.
Well most roms now use ext4 filesystem instead of RFS (default) so you have to install Clockwork Mod 3 which will auto convert it
CWM3 directions:
Download Here
On phone go to applications -> development -> usb debugging (turn on)
plug phone into usb port, run the run.bat from the CWM folder (it might say something like restart server and wait for phone to reconnect i generally just close the window and run the run.bat again then it'll mount as r/w and install)
Then after your phone reboots transfer any ec05 ext4 rom to your sdcard, i suggest This one.
After that turn off your phone completely.
Hold volume down, camera button, power. This will boot into clockworkmod.
CWM will backup all data, format, then restore the data... it'll take a few minutes.
Now if you want to start fresh click wipe data / wipe cache and also go to advanced/wipe dalvic cache. If you want to keep all your apps just proceed to the next step
go to Install from sdcard, browse sdcard for the rom.zip, select it, let it do its magic, after its done go back to the main menu, reboot system, and you're done
EDIT: Cwm controls -> volume up/down to naviage, Power = back, Camera = select. I think you can also use the keyboard arrows and stuff but i find it easier using the buttons
I think you should start him with cw2.5 instead of 3.0. 3.0 will brick his phone unless he is ready to flash a rom right alway!!
Those directions are much easier to follow.
What are the negatives to doing this to your phone (besides the ultimate brick)? Would doing this allow me to give my phone the ability to hotspot it?
How would I go about restoring it should I not like Syndicate and wish to return to stock?
OmegaMateria said:
Those directions are much easier to follow.
What are the negatives to doing this to your phone (besides the ultimate brick)? Would doing this allow me to give my phone the ability to hotspot it?
How would I go about restoring it should I not like Syndicate and wish to return to stock?
Click to expand...
Click to collapse
If I was you I wouldn't be in such a rush to flash a rom. Root first and take from there. It took me a whole month to flash a rom before I felt comfortable with the terminology. Catch up on some reading first
hi I also am still new to this even though i flashed my phone at least a 100 times and got my buddys epic rooted i followed this forum http://forum.xda-developers.com/showthread.php?t=798067. they did a great job with links to get cwm2.5 and also the adb files. so when you root your phone the computer will find your phone. One thing that did keep me held up for a while was when you have your phone in debug mode. connect the phone to the usb. but do not press connect on your phone. hope this helps some. I spent about 3 long days reading and gathering everything before trying and like a day and a half trying.
shook187 said:
If I was you I wouldn't be in such a rush to flash a rom. Root first and take from there. It took me a whole month to flash a rom before I felt comfortable with the terminology. Catch up on some reading first
Click to expand...
Click to collapse
You're probably very right.
What permissions does rooting get me? To root my phone I should use clockwork or something different? If so, you suggested 3.0 and someone else 2.5. Opinions on both for a newbie?
shook187 said:
I think you should start him with cw2.5 instead of 3.0. 3.0 will brick his phone unless he is ready to flash a rom right alway!!
Click to expand...
Click to collapse
No such thing will occur. He might get it into a position of where he can only use odin but certainly not a brick. I have heard of only 1 person bricking their phone in 6 mths and that was a dev cuz he was messing with the bootloader. Jump in at your own pace.
Sent from my SPH-D700 using XDA App
OmegaMateria said:
You're probably very right.
What permissions does rooting get me? To root my phone I should use clockwork or something different? If so, you suggested 3.0 and someone else 2.5. Opinions on both for a newbie?
Click to expand...
Click to collapse
I never suggested 3.0, I would do 2.5. 3.0 Requires you to flash a rom cause it won't boot without a rom. If you use 3.0 without flushing a rom, you'll get stuck at the samsung screen.
shook187 said:
I never suggested 3.0, I would do 2.5. 3.0 Requires you to flash a rom cause it won't boot without a rom. If you use 3.0 without flushing a rom, you'll get stuck at the samsung screen.
Click to expand...
Click to collapse
Sorry, my mistake!!
I'll check out 2.5. Anything I should know about rooting in general?
OmegaMateria said:
Sorry, my mistake!!
I'll check out 2.5. Anything I should know about rooting in general?
Click to expand...
Click to collapse
The main thing which you already mention is the free wireless tether.
CWM 2.5.5 = the RFS root method. You can use it to install EC05 roms that have RFS support
It allows you to run programs with superuser... such as wifi tether, wireless tether, titanium backup, root explorer... thats about it for the basic user
If you want tweaks/fixes what you want is a custom rom... most all will have
Call log fix (remove the sms notifications from in your call log), Kernel fixes/updates/added features, deodexed, zipaligned, custom boot animations, voodoo audio/color, custom touchwiz, etc..
You wont brick your phone regardless, but if you do it exactly as i typed you wont have any problems either . The reason you want to put a rom on your sdcard before you boot into CWM3 is so you can flash a compatible rom that has a ext4 kernel...
EDIT: and regarding the negatives, well you wont brick your phone unless say your battery dies as you flash it... The ext4 non-journaled will actually make your phone last longer over the RFS system. The only thing I can think of is the root method removes the Free HD games and Asphalt 5 Demo which the official OTA updates check for when u get them. Doesn't matter though because you can update your rom through CWM anyways lol.
About positives, atleast for me: Longer battery life, faster phone, less annoying bugs, sexy look, custom boot/shutdown, free wifi tether/wired tether, automatic backups set every night at 5am.
I went straight to cwm 3.0.0.6 as a noob but I must have read 1000 posts in various forums regarding root, the file system(s), custom software/ROMs/kernels. The key is read post after post about where others have had issues until you no longer come accross any new issues. Then you know what you are getting into. Just remeber, glitches can occur and during flashing, there are writes that have no error checking and sometimes require a reflash at best and a system restore at worst. It comes with the territory. It is unlikely you will brick your device as long as you are careful to follow insructions, although the reality is (no matter how many times you hear how safe it is) that there is a very very slight chance that a glitch while using software such as odin could send you back to the Sprint store for a new one. Its exceedingly rare, though.
The small risk was worth getting the phone that I wanted originally - instant responsivness, access to every customization and dev. level control of the hardware (free tethering!) - everything runs better - games,browsers,vids (look better and sound better), music sounds better, etc. Etc. There are some seriously talented devs. here. If you decide to take the plunge, check out k0's ACS Frozen ROM and mysteryEmotionz (sp?) Theme(s). When you go from stock to those, you can't help but wonder WTF sprint and samsung are thinking. Yeah, its that good.
Good luck!
Sent from my SPH-D700 using XDA App
blu9987 said:
CWM 2.5.5 = the RFS root method. You can use it to install EC05 roms that have RFS support
It allows you to run programs with superuser... such as wifi tether, wireless tether, titanium backup, root explorer... thats about it for the basic user
If you want tweaks/fixes what you want is a custom rom... most all will have
Call log fix (remove the sms notifications from in your call log), Kernel fixes/updates/added features, deodexed, zipaligned, custom boot animations, voodoo audio/color, custom touchwiz, etc..
You wont brick your phone regardless, but if you do it exactly as i typed you wont have any problems either . The reason you want to put a rom on your sdcard before you boot into CWM3 is so you can flash a compatible rom that has a ext4 kernel...
EDIT: and regarding the negatives, well you wont brick your phone unless say your battery dies as you flash it... The ext4 non-journaled will actually make your phone last longer over the RFS system. The only thing I can think of is the root method removes the Free HD games and Asphalt 5 Demo which the official OTA updates check for when u get them. Doesn't matter though because you can update your rom through CWM anyways lol.
About positives, atleast for me: Longer battery life, faster phone, less annoying bugs, sexy look, custom boot/shutdown, free wifi tether/wired tether, automatic backups set every night at 5am.
Click to expand...
Click to collapse
I went into the run.bat file in the one click root and removed the 2 lines that give the command to delete the free hd games demo and asphalt 5 demo. Ran the one click root, and I still have those 2 installed on my phone. Beats having to reinstall them again in the future and preventing an update because of the missing apps.
Tirregius said:
I went straight to cwm 3.0.0.6 as a noob but I must have read 1000 posts in various forums regarding root, the file system(s), custom software/ROMs/kernels. The key is read post after post about where others have had issues until you no longer come accross any new issues. Then you know what you are getting into. Just remeber, glitches can occur and during flashing, there are writes that have no error checking and sometimes require a reflash at best and a system restore at worst. It comes with the territory. It is unlikely you will brick your device as long as you are careful to follow insructions, although the reality is (no matter how many times you hear how safe it is) that there is a very very slight chance that a glitch while using software such as odin could send you back to the Sprint store for a new one. Its exceedingly rare, though
Click to expand...
Click to collapse
Yeah I've spent the entire week when not at work reading about it to see if it's worth it. I have a hard time following the directions I find though because they're normally written for experienced folks and not beginners.
Apart from Rooting it (as explained very well earlier) I still have no clue about flashing, how it works, or how to do it. Nor do I want to just fiddle around with it and break it. I can't find a good guide on ODIN or backing up that I can understand comfortably enough to risk flashing my phone so I'm kindof at a loss.
Go on YouTube and search "randyshear". He has step by step videos for pretty much everything. Makes it easy
Sent from my SPH-D700 using XDA Premium App
OmegaMateria said:
Yeah I've spent the entire week when not at work reading about it to see if it's worth it. I have a hard time following the directions I find though because they're normally written for experienced folks and not beginners.
Apart from Rooting it (as explained very well earlier) I still have no clue about flashing, how it works, or how to do it. Nor do I want to just fiddle around with it and break it. I can't find a good guide on ODIN or backing up that I can understand comfortably enough to risk flashing my phone so I'm kindof at a loss.
Click to expand...
Click to collapse
I was the same way and to some degree still am. What I did was read and read. I read the WIKI several times realizing that a lot of it was written for someone more experienced than I. I also read how to restore a bricked device and return to stock a few times. I installed everything to return to stock on my PC so if I had a failure I already had my path back to working stock. I went to CM 2 just to get some experience. Then I went for it to CM 3 and Syndicate 1.0 and have been incredibly happy that I did.
Also know that terms like brick are used a lot but is then followed up with my phone will do this or that. In the definitions a brick is literally as good as a brick for a phone. The term is used way too much incorrectly so don't let that scare you. You will see when reading that there are only a few things to do if there is a problem. Frequently you will read to re download the files or use a different cable or USB port. If you keep reading you will become more comfortable with your ability to find the answers if there is a problem because there are people on here that seem to take great joy in helping people like you and I out and they have the experience and knowledge to help.
Trust me ... keep reading and searching and you will start to put the pieces together. Don't be discouraged. If you are really interested in this stuff, you WILL get there.
Sent from my SPH-D700 using XDA App
Definitely agree with JohnCorleone, Randyshear has a ton of very good youtube vids. Helpful with rooting also with picking a ROM. Just to add my two-cents. The "epic cookbook" http://forum.xda-developers.com/showthread.php?t=967014...Helped me over and over again. alot of info, without alot of scavenging throughout threads. Good luck
There is no need to flash a rom right off the bat. Rooting with one click will give you a good jumping point. I would one click root to cw3 let it convert to ext4 then do a backup. Use titanium backup to remove all the junk bloatware.
Sent from my SPH-D700 using XDA App

[Q] HELP!!! how to get the new evo update with root...COMPLETE noob here guys

hey xda fans....ok so i have a severe issue here:
i have the evo 4g...rooted... and am on sense with 2.2 and 3.70 (i think you guys know what that is) so anyway i want to get the new update and start really having fun with my phone. I have not been able to fully understand all this rooting and flashing etc...O_O so i installed ROM manager, which now some peeps are sayin dont use if you dont know what you are doing WELL HI, THAT WOULD BE ME so for all the experts, gods and godesses of rooting (EVO) flashing, please please please help me from start to absoulute finish...i need to know what am i downloading, running, saving and to where- that was a huge issue too i couldnt find the files after i downloaded them LOL if i am successful...I will post the greatest YOUTUBE, forum, blog about this..i am so lost right now
b4 i forget a couple updates of info everytime i tried to flash or do any type of recent updates i get the usb connection 170 error or maybe 171 cant remember now....ummm...i rooted originally with unrevoked so unrooting i wouldnt have a clue...and yes i have searched allll possible threads for help but i only get 50/50 and then still get messed up..thanks
thanks again and happy rooting
While I am not going to hold your hand as there is plenty of information on these forums and the internet, I will steer you in the right direction. Since you are rooted, all you really need to do is download the rooted version of the latest stock rom. There are a few in the development section. The version is 4.22. After downloading you will flash this rom in recovery. Make sure you do a nandroid backup before flashing the update.
DO NOT unroot just to install the update. You will lose the ability to root hour phone for the foreseeable future.
Good luck
Sent from my PC36100 using XDA Premium App
ok thanks i will try it now...stay tuned
Ur not going to see much difference. The update dissapointed lots of people expecting a new look. Install a couple of custom roms if u want to have some fun. I am using the MikG v1.03 Rom with new sense incorperated and its waaaay better than the stock update we just got.
Sent from my PC36100 using XDA App
Pleat try to see this as advice and not being an ass.
Rooting your phone is really for being able to dig in to your phone and get all you want out of it and be able to customize more than the average evo.
What were your initial intentions for rooting? I get the draw to have free wifi tether but, that just happens to be one perk of it. Of course, there are the options of kernels and cpu clocking.
But, really the developers are attempting to bring the newest and most useful and functional features to the roms opening the full potential of your phone.
Aside from that, if you are unclear and confused about the process of flashing, you should really hold off and do some more research.
Go to the wiki page and read up! i spent about a month reading everything I could find on rooting, flashing, kernels, radios, prls, threads on roms and their issues and up sides. I knew what I was doing and what rom and features I was going to use.
Honestly, youtube will also be your friend. A few devs also post videos people have made about their roms including how to flash them. You should also read up on the results of mistakes made during flashing and how to fix them.
Get to know your phone and submit it to do your will!
Good luck!
Sent by Supersonic!
thanks to all...and no offence at all imheroldman. i appreciate every piece of info...well i did flash the new 2.3 and totally hated it no difference...apps were gone (probably my fault LOL) but i went back so ill keep trying until i find the absolute best ROM for me. i may try your advise sand1303 and look at MIK
thanks again guys
dmccoy516 said:
thanks to all...and no offence at all imheroldman. i appreciate every piece of info...well i did flash the new 2.3 and totally hated it no difference...apps were gone (probably my fault LOL) but i went back so ill keep trying until i find the absolute best ROM for me. i may try your advise sand1303 and look at MIK
thanks again guys
Click to expand...
Click to collapse
Your apps were gone because you wiped data. Try Titanium Backup - there's a free version in the market that allows you to backup and restore, get the Pro key to avoid agreeing to the permissions/install of each individual app. The Pro version also allows for a larger number of backups per app, where the free version limits to one and when you make another backup it overwrites the first one. You can also freeze apps with the full version, but if you enable "Chuck Norris Mode" in settings the free version will allow you to uninstall system apps. There are other perks to the Pro Key, but I digress...
If you backup your apps & data, you can restore them on the new one. Whenever you flash a new rom, always wipe data, cache and dalvik (dalvik cache is under advanced in Clockwork). If you're simply updating the rom (ie to a newer version by the same dev, like Cyanogenmod nightlies) you can just wipe cache and dalvik unless otherwise stated in the rom. Whenever you flash anything other than a rom - kernels, themes, mods, radios, etc - do not wipe data.
If you don't know which rom to use, as long as you have a nandroid backup you can always go back to your setup that you like... so flash away. If you want to stick with something closer to what you're used to, try Myn's Warm TwoPointTwo... it's still FroYo. If you want Gingerbread/Sense, I've heard great things about MikG. I would avoid any rom that needs you to partition your SD card until you get your feet wet & know what you're doing.
Oh, and if you decide to flash the new radio update, don't pull the battery when you see the screen you've never seen before - you'll brick your phone. Just wait it out, and it'll take you back to recovery where you can then reboot normally.
(from... Evo/MIUI/Tapatalk)
Definitely look at Mik, and learn all you can about partitioning your card for APS2SD, you'll want that for the bigger ROMS, about flashing radios, very important to do that correctly, about theming, and so many other things that being rooted opens up for you.
Mik is great for sure, also kings roms. If you want something that is still htc sense there are many great developers and right now is the time because they are able to merge ports with the ota for the max performance for our phone while running gingerbread and having nifty new 3.0 sense features.
And maybe someday you will venture to the aosp world some day...
Sent by Supersonic!

Ox's noob corner (work in progress)- everything you need to get started right here

Well everyone the dinc2 community has treated me well but I have moved on to the htc rezound please do not hesitate to still pm questions though I'm hoping I can find a volunteer to take over this thread. I'll miss you guys cuz for the most part it was a very mature forum and ill pop in once in awhile to say hello. Good luck if anyone would like to give back to this community and take over this thread pm and ill pm a mod. god bless
I thought it maybe fun to have a light and humorous side to this also so everyone keep your eyes out for funny posts that can make our quote of the day:
if you guys see any posts that make you chuckle pm me and I will put it here and credit you for finding it
Anyone looking to root your incredible2 that is on 2.3.4 with the.98 hboot please see here: http://forum.xda-developers.com/showthread.php?t=1298990 then after your hboot is downgraded follow the instructions on rivera82falcons thread,linked below
hey guys I'm attempting to get a thread started to get all the basic info out to the newcomers that they will need to start there modding a flashing journey. I'm also hoping this will help cut down on the repetitive questions and useless posts mucking up our forums. This is and always will be a work in progress, so this is just a start there will be much more info added as time goes on.
First thing if your not rooted yet everything you need to know is in this thread by rivera82falcon http://forum.xda-developers.com/showthread.php?t=1219246
Next up is how to flash a custom rom: http://forum.xda-developers.com/showthread.php?t=1263756 by AgalychnisCallidryas
Another thing is the gingerbread ruu. If your phone comes with froyo I would reccommend following the directions on this page before trying to root because unrevoked is becoming increasingly harder to find. Also this can get you out of some pretty sticky situations if you mess up badly enough: http://www.androidpolice.com/2011/0...8-605-4-same-as-the-official-gingerbread-ota/
wanna try a different radio? Head over to gu1dry's thread: http://forum.xda-developers.com/showthread.php?t=1134451
Its my opinion that every flasher should have adb setup on their computer, it will bail you out of a bootloop, tell you why its happening and do all kinds of other awesome stuff. here is an excellent thread from nephron to get you on your way, its from another phones forums but everything except the drivers apply to us, obviously install the correct drivers for your phone: http://forum.xda-developers.com/showthread.php?t=532719
for those of you who use aosp roms, just about everyone prefers the miui camera over the aosp stock one and here it is with instructions. Thanks pacerguydon: http://forum.xda-developers.com/showpost.php?p=17691395&postcount=11
if your market is missing apps, check this out: http://forum.xda-developers.com/showthread.php?t=1275574 thanks knipp
those of you who want to learn java and general scripting here is a few good tutorials that artvandelay440 dug up:http://forum.xda-developers.com/showpost.php?p=17691710&postcount=13
for the up and coming themers here is where to get brut.alls apktool:http://code.google.com/p/android-apktool/ if anyone can find me a good noob friendly tutorial for apktool let me know and I'll post it.
tommytomato created a fantastic super tool called android utility, you can decompile apks sign them and do all kinds of good stuff. Really the ultimate themeing tool: http://forum.xda-developers.com/showthread.php?t=1167623 if your thinking of doing mods and themes of your own you should check this out, tommy is a modding master and extremely helpful to new themers
wanna changer your splash screen or boot animation? Have a look at 06stangs thread here: http://forum.xda-developers.com/showthread.php?t=1161543
if your running an aosp rom you can change the carrier label here's how: http://forum.xda-developers.com/showthread.php?t=1221882 thanks to artvandelay440
running a sense rom? Go here for a new lockring: http://forum.xda-developers.com/showthread.php?t=1260128 thanks to jwhetstone02
our friend knipp21 has started modding miui lockscreens check it out: http://forum.xda-developers.com/showthread.php?t=1288566
before getting my incredible2 I had an inspire, the one thing I missed about the inspire was 4ext recovery,well now we have it. Big thanks to madmaxx80 for the awesome recovery: http://forum.xda-developers.com/showthread.php?t=1267540
here is a great tool for undervolting, it provides an easy to use gui, please read up on the pros and cons of undervolting before attempting and remember you must have a kernel that supports undervolting to use this. It will not work on the stock kernel. Thanks to chad0989 for this: http://forum.xda-developers.com/showthread.php?t=1190004
here is setcpu a tool for overclocking, your kernel must support overclocking and this should not be used in conjunction with any other overclocking apps. Thanks to coolbho3000 for this, and please guys consider purchasing the donate version of this: http://forum.xda-developers.com/showthread.php?t=505419
here is a very educational thread similar to this one, its from the thunderbolt forums but most of the info applies to us as well. Its a very well put together thread and super informative. I reccommend you guys check it out because its a good read. Big thanks to loonatik78 for putting it together: http://forum.xda-developers.com/showthread.php?p=16695064#post16695064
another thing I would like to stress to the new people, xda has a thanks button, and now you can even use it right from the xda app, don't be greedy with it guys if someone helps you click thanks.
I would like this thread to become a community effort, if there is anything you guys feel should be here dont hesitate to let me know. This is my small effort to give back to a community that gave me so much so I will gladly try to answer any and all questions in an effort to keep our forums clean. No matter how stupid you think the question may be pm me and I'll try to help. I may not always have your answer but will most likely be able to point you in the right direction. see post three for frequently asked questions
Pm me for any and all questions as well.
Sent from my Incredible 2 using xda premium
this q and a section will be a work in progress as well. If anyone has suggestions for questions that you think should be here, by all means let me know.
Q: I think I bricked my phone what should I do?
A: calm down 99 percent of the time people think they are bricked they really aren't. If your device shows any sign of life your chances are good that your ok. If you can access hboot by holding volume down and power while the device is off your in good shape you can still flash the ruu and get back to stock.
Q: I put the ruu on my sdcard but hboot cannot find it
A: when flashing anything from hboot it must be named exactly PG32IMG.zip and yes it is case sensitive. Also if you have to rename the file, if doing it on a computer be careful because a computer will automatically add a .zip to the end of it and hboot will not recognize it.
Q: I flashed a kernel a now my "insert issue here" don't work
A: did you flash an aosp kernel on a sense Rom or vice versa? If so things will not work as they should always make sure the kernel you are flashing is compatible with your Rom.
Q: will sense apps and widgets work on aosp roms?
A: short answer is no
Q: my phone is stuck in a bootloop what should I do?
A: some time in your flashing career you will encounter a bootloop, there are a couple of ways to fix this number one is start adb (which every Rom flasher should have set up in my opinion) and type adb reboot recovery and hit enter then once in recovery you can reflash and try again. Your other option is to pop the battery out, put it back in then hold volume down and power to get into the bootloader once there select recovery. If you can not navigate in the bootloader that means the PG32IMG.zip is on your sdcard still. Remove that and it will let you navigate the bootloader. If you have no way to remove that .zip pop out your sdcard boot into bootloader select recovery then pop your card back in.
Q: what is the best Rom out there?
A: there is none its all a matter of opinion. Just a warning, don't start a new thread asking this question you will be flamed into oblivion and the mods will lock it. I've seen it a million times
Q: I just flashed an aosp Rom (miui, cm7, omgb) why is my earpiece volume so low?
A: as of now this is a known issue for our aosp Roms, the tiamat kernel is said to fix it.
this is the start of my q and a and it is far from complete, if you think there is something important that is not here by all means let me know.
Ok guys here is some basic terms you should be familiar with before rooting and flashing
1. Flash or flashing, basically just means to install something from recovery or bootloader
2. Rom- the word rom is kind of an outdated term (read only memory) because we can in fact write to it, nonetheless a rom in the simplest of terms is basically your operating system.
3. Kernel- the kernel is the heart of your o.s. It basically communicates with your software and hardware, wifi and processor speed are a few examples of things your kernel controls among many other things. Sense kernels should not be used on aosp roms and vice versa things will not work as they should.
4. Overclocking- to increase your processors stock speed to increase performance
5. Underclocking- pretty self explanatory underclocking is used to help save battery
6. Undervolting- to decrease your voltage to save battery. Undervolting is a slightly controversial topic some people swear by it and others say it can actually decrease your battery life. Undervolting can cause stability issues so educateyourself before attempting.
7. Radio- basically the software that works with your hardware to give you your signal and mobile network, on other phones they are also reffered to as modems
8. Aosp- android open source project, aosp roms are roms built from the original google source code, some examples of these are cm7, miui, omgb, these are typically lightweight roms that you can customize yourself, they are preffered by many users because of the great battery life and performance
9. Sense roms- these are roms based on an original htc rom, sense is th ui that htc adds to android, sense roms have many nice apps and widgets, and usually are packed with eyecandy, however many people say that sense it a resource hog and needs a lot more ram to run than aosp roms
10. Port- a port is a rom or theme originally made for another device but made to work with ours
11. Wipe- it is usually recommended to wipe before flashing a rom, but not always mandatory, read the forum of the rom your flashing to see if a wipe is recommended or not. Some roms will wipe data automatically some will not. A wipe is just basically giving you a clean start like when you first got the device and is done in the recovery menu. When in doubt wipe, you will run into less issues.
12. Ruu- an ruu is a stock signed rom that is flashed in hboot, an ruu is your get out of jail free card, if you mess your phone up too bad an ruu will bring your device back to its stock state
13. Hboot_ this is basically your bootloader from hboot you can enter recovery, do a factory reset, and flash an ruu, a radio, and other things not flashable in recovery
there is some more basic definitions that I overlooked, see post 28 by artvandelay440
How about some basic definitions? Sense, AOSP, Rosie, kernel, recovery, md5 sum, etc.
How, when, and why to wipe.
How to perform a battery calibration.
Don't restore system data when moving to a different ROM or updating to a new framework.
ontophantoms said:
How about some basic definitions? Sense, AOSP, Rosie, kernel, recovery, md5 sum, etc.
How, when, and why to wipe.
How to perform a battery calibration.
Don't restore system data when moving to a different ROM or updating to a new framework.
Click to expand...
Click to collapse
yes good idea. Definitely will do. I also plan to add a miscellaneous goodies section including commonly used apps like miui camera. And links to kernels and other good stuff. Like I said this thread is a wip I just wanted to get a start on it tonight. I'm not at home now and I'm doing this on my touchpad so its quite tedious. Will work on it a lot more tomorrow. Thanks for the input
Love this idea for a thread. I know this will be a stop that noobs and even seasoned vets will make. Thanks for taking the time to put something like this together!
Thanks for setting this up!
It's really helpful to us newcomers, who inevitably ask a question that will annoy the seasoned members. There is so much info buried in threads with many pages that it's hard to read it all and not overlook something along the way.
Having all the start-up info, and maybe a list of well-known bugs for each rom, in one place will be great!
Woot! Got a sticky!
Sent from my Incredible 2 using xda premium
+1 For the best idea ever. Great job.
I think you should spice it up a bit I'll add more later lol. Good thread guys.
For the first post you can start it like this:
Rooting your phone (Achieving S-OFF)
Please read and re-read rivera82falcons execellent write up located here:
http://forum.xda-developers.com/showthread.php?t=1219246
Flashing a custom ROM to your device
Please read AgalychnisCallidryas thread on how to manually flash a ROM located here:
http://forum.xda-developers.com/showthread.php?t=1263756
Please note that you don't need to back up every user app with titanium backup, some people only like to backup apps that have data, such as games.
It's also important not to back up system apps (apps that came with the phone). Restoring those apps may cause system failure.
Setting up ADB
Nephron has a full set of instructions on how to set up ADB, you can find the thread here:
http://forum.xda-developers.com/showthread.php?t=532719
Finding the ROM that's right for you
This is one of those threads that may be sensitive to some. I find that finding the best ROM depends on your tastes. When ROMs are released they generally have bugs. Some may be deal breakers, like not having MMS working, or something small like not having a particular tweak installed or an application force closing. You really have to download the ROM and take it for a test drive.
Read through the threads on feedback. Generally, if you see the same bug being mentioned it probably is plagued through every ROM install.
GSM functionality of the phone is important to some, but not most. Generally, if you download a ROM that's based off of the original ROM it should work fine. But if you are downloading a port from another device expect that feature not to work.
Don't be afraid to flash a ROM. The worst that can happen is it will throw your phone into a soft brick (bootloop). Simple way to fix it is restore a backup you made or flash a ROM that you know is solid.
Creating a backup (nandroid) of your device
Your phone at this point must be rooted, and the ROM you are running has to be rooted.
Get Rom Manager from the market. Install the latest recovery that it prompts you with - If you've already installed clockwork mod then proceed.
In ROM Manager:
1. Scroll down to Backup Current ROM
2. Name it what you like, like backup_09192011
3. Let it back up. The more data you have the longer it takes.
In recovery: (You cannot assign names in recovery)
1. Boot into recovery
2. Go to backup and restore
3. Choose backup
To restore a nandroid backup - Wiping data, cache, and dalvik isn't necessary.
1. Boot into recovery
2. Go to backup and restore
3. Choose restore
Useful Applications:
http://androidcommander.com/ great for deleting or replacing apps on the fly. Windows interface, simple to use.
Here are a few more additions:
Replacement camera app for those that don't like to use the stock camera that came with CM 7 or other AOSP Roms.
This Click me Miui camera app works great, just remember to go into the camera settings after installing and select 8mp as the picture size. It can be installed as either a separate camera app or as a replacement to the stock camera.
To install as a add on, just install the apk as a you would any other app. Download to your sd card and install.
To replace the stock camera app, rename the downloaded apk to "camera" (without the quotes) and using root explorer (make sure and select R/W) move the renamed apk to system/app and replace the stock camera apk (first though, make a copy of the stock camera app and add .bak onto the end and store this copy on your sd card, I make a folder named storage so I know where my .bak files are at).
Now that the camera apk is in the system/app folder, the permissions and ownership will need to be changed.
Long press on the camera apk and in the popup menu select permissions,
You will want to change it to look like this:
Read Write Execute
Owner x x
Group x
Others x
After changing the permissions, scroll to the bottom of the popup menu and select "change owner"
You will want to change the ownership so that it reads"
Owner 0 - root
group 0 - root
Select OK and your done. Reboot and you will know have the Miui camera installed.
Wallpapers:
Click me
More to follow later.
Awesome guys keep em coming. I didnt expect this thread to explode so quickly great job guys. Anyonr tutorials or info you guys add i will link to in the op. I will typically update the thread every night around midnight eastern time. Thanks guys.
Sent from my Incredible 2 using xda premium
I always see lots of beginning android users who want to learn Java/xml/whatever to begin building. I made a list of some coding tutorials-they might be of some help to a newcomer who wants to learn.
JavaScript for Android:
http://www.youtube.com/playlist?list=PL34F010EEF9D45FB8
General Introduction to learning Android development:
http://developer.android.com/guide/developing/index.html
General Coding:
http://www.codecademy.com/#!/exercise/0
From around XDA:
making your own boot animations: http://forum.xda-developers.com/showthread.php?t=1096068
ADB workshop and guide, including edited path variables: http://forum.xda-developers.com/showthread.php?p=9959449
How to decompile/edit/sign/recompile apks with APK Manager:http://forum.xda-developers.com/showthread.php?t=695701
how to use APK Edit (apk tool with custom GUI): http://forum.xda-developers.com/showthread.php?t=890199
Editing with NinePatch (.9.png) images: http://forum.xda-developers.com/showthread.php?t=1192207
Great thanks!
Sent from my Incredible 2 using xda premium
Add how to change boot animations and splash screens? (my thread)
Sent from my ADR6350 using Tapatalk
Sure will thanks
Sent from my Incredible 2 using xda premium
oxlong27 said:
Sure will thanks
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
Maybe the how to on hulu? I dont think many use it...but it won't take up too much space right and the how to for renting movies from the market (posted somewhere as changing permissions to mu from Su temporarily)
But seriously this is a great job. I didn't expect all this lol. I'm glad we are trying to save our community.
I came to the Eris and it already had a community. We built this one and it needed some leadership. Way to take charge bro
Unlike the Eris all our devs would rather have their own site and that's ok. But ppl haven't been mature about it. I like the devs like tazz and the way he does things. Just the way I am lol.
Sent from my Incredible 2 using xda premium
I never expected it to take off like this either, but im definately glad everyone likes this and will continue to work hard on it thanks again guys. Will update tonight with links to your suggestion
Sent from my Incredible 2 using xda premium
Another thing.
Some questions would be answered of you tried it yourself.
Like "how does this app work" open the darn thing and find put...if you're still lost in the sauce come ask here. Please research and try yourself first.
Sent from my Incredible 2 using xda premium
knipp21 said:
Another thing.
Some questions would be answered of you tried it yourself.
Like "how does this app work" open the darn thing and find put...if you're still lost in the sauce come ask here. Please research and try yourself first.
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
yes very good point knipp I want this thread to be informative and educational not a hand holding experience. I have no problem helping anyone that is willing to help themselves but it makes my skin crawl when I see a post that says “wanna root someone please give me detailed instructions" and I have seen a lot of them.

Removed Carrier IQ / CIQ, phone won't boot

You've probably heard about the Carrier IQ fuster cluck by now and, if you're like me, are up in arms and want it gone if you have it on your phone. I would suggest that you don't use the removal tool yet...
I am rooted using the "stock" method here: http://forum.xda-developers.com/showthread.php?t=1342728 and just downloaded the tool from http://forum.xda-developers.com/showpost.php?p=17612559&postcount=110 to check for CIQ on my phone (it was there) and purchased the license to remove it, which I also did. I then rebooted the phone as instructed but can't get past the SGS2 splash screen.
Can someone please help me... if I have to flash a new rom, fine - I can accept that. I should have been thinking before I did anything but I had only rooted up to this point and didn't have any Nandroid backups or anything and that's my fault. However, I used the internal phone storage or SD as my primary file location and need to access it to grab my files. Is there any way to do this if my phone isn't booting up?
I read another thread (can't seem to find it now I was on my mobile device), where another person did the same exact thing as you and had to ODIN to stock and start from scratch. The phone isn't bricked, but it's not going to boot now.
I'm disappointed because according to Caulkin's ROM CIQ is removed, but I used the tool you are speaking about as well and it states that CIQ still exists. I was going to pay the .99 and have it removed since that tool supposedly works for Samsung devices, but after reading that other thread and now yours - I'll pass.
I'd recommend re-ODIN'ing your phone, not from experience with the issue but just from what I read from the other thread - you aren't going to have much of another option.
EDIT: Here's the link to the thread with your exact questions pretty much and the answers you can expect - http://forum.xda-developers.com/showthread.php?t=1360988
Ugh. Thanks for the reply... this is so annoying. If I go that route, it's going to wipe all of my internal SD memory, too? I've already lost access to the items on my external card because I had that encrypted... but I used my internal for primary storage and have a LOT of items on there of great importance...
Starting from scratch I can deal with - losing all my files I can't.
What package are you on? It works on EG30, but not on EK02. Framework is different.
Worked find on my EG30. Waiting for it to be updated to the EK02 package. Should be around soon.
Not trying to nitpick, but you should always have at least two backups of your internal and external memory. That's at least what I do, usually I backup all my files once a week and do a NANDroid once a week. Saves the headaches from ever happening.
You could try three-fingering to see if you can get into recovery and see what you can do from there, but I don't think you are really going to be able to do much. This method has been tried and proven to soft-brick your phone.
I was going to attempt this method this morning and then did a simple search on XDA and found it had soft-bricked that guys phone I linked you too. That's all it would have taken...
Good luck.
I have some backups, as well as Titanium Media Sync running and Google+ uploading photos, but there are always gaps. Unfortunately I haven't done a 'hard' full drag and drop back up for a couple of weeks, and you can generate a lot of data in that time.
To tell you the truth I'm a little unsure about how or what it takes to have the ability to do a Nandroid backup. I've done plenty of them in the past but what I mean is that since I just did the stock root method I don't know if I needed to install CWM or something like that to get the ability to do a Nandroid. I just haven't had the time to research that fully so I hadn't done one yet.
For what it's worth, the ****storm about the CIQ thing just really exploded in the last 24 hours or less so I didn't think there was anything to look up about the removal tool. I guess I was so distracted about the BS that is Carrier IQ and just wanted it gone, so I ran the tool without thinking there was a database of information on it already. It was my bad.
In the automated rooting thread, you could choose Option C and select a kernel+CWM to install EG30+CWM and EG31+CWM are provided.
update: Fixed. Whew. Thanks for the suggestions, especially, sfhub. Did as you said over in the other thread http://forum.xda-developers.com/showthread.php?t=1342728&page=26 ... will post followups there but basically flashed the stock rom in odin and phone booted back up like nothing ever happened. Well, the only difference really was the media scanner took a considerable time longer than usual on that first clean boot. Thank you so much, again, and see you over in the other thread w/ a few more questions...
dbaybay said:
I read another thread (can't seem to find it now I was on my mobile device), where another person did the same exact thing as you and had to ODIN to stock and start from scratch. The phone isn't bricked, but it's not going to boot now.
Click to expand...
Click to collapse
Unfortunately, that was probably me. I freaked out too but just Odin the stock tar and all is well.....other than now being on E31 and now can't get any ek02 goodness.
Sent from my SGSIIE4GTuvwxyz....should I touch my nose or walk a straight line now?

Categories

Resources