Develop Bugs

[Resolved] I know there's a lot threads about bricked desires but...

More information added in my 3rd post below...
I've searched the forums, googled and tried praying to the smartphone gods and I can't find an answer. Maybe you guys can help.
I downloaded a ruu that got half way through the process when it said I was using the wrong ruu and to instigate the recovery procedure - which I did. Unfortunately the phone didn't go into the white startup screen (the one you get if you hold the return key while turning on) with the recovery option, when rebooted, therefore preventing it's recovery.
The phone has the green charging light when pluged into usb but there is no 'HTC' screen or anything when trying to boot it. Just a black screen. I removed the battery and all I get is a vibration when turning it on and that's it, although on a few occasions the buttons on the bottom of the unit have lit up but to no avail.
Forgive me if the details are vague but it's all I have. I hope someone can help...
Al

Do you have slcd desire and did you use the correct ruu?
Do you have custom recovery ?
Sent from my HTC Desire

elmalote said:
Do you have slcd desire and did you use the correct ruu?
Do you have custom recovery ?
Sent from my HTC Desire
Click to expand...
Click to collapse
I think I used the incorrect ruu; that's why it sent me to recovery mode. I think it's AMOLED which is why I picked the ruu I did but it is a 2.1 phone and I was trying to get to 2.2. I think I used the wrong ruu...
No, I don't have custom recovery.
Thankyou for helping so quickly.
Al

Anyone have any idea? I get the feeling this phone is truely bricked...

Which ruu did you use to begin with? Was it previously branded?
A generally safe way to recover any phone is to flash the froyo ruu, but you may need a goldcard for that. Start the phone in fastboot mode to get the ruu to work.

teppic74 said:
Start the phone in fastboot mode to get the ruu to work.
Click to expand...
Click to collapse
The issue is it won't go into fastboot. Just a black screen when I try to turn on the power. The ruu failed and said it couldn't see the phone and to remove the battery and then power on to recover the original rom - that's when it started not working.
I know how to get the fastboot screen but with this phone the screen will not come on.
The ruu i used was: RUU_Bravo_HTC_Europe_1.15.405.3_Radio_32.30.00.28U_4.05.00.11_release_121865.exe
It was branded to t-mobile and was trying to debrand it. I created a goldcard as well. I have all the drivers needed on my PC but my PC can't see the Desire via USB. USB bricked solutions won't work because I can't get the phone to power up - well the buttons on the bottom light up and the phone vibrates but that's it.
Perhaps my first bricked phone?
Al

don't worry. because of the feedback you are getting (buttons lighting up, green charge light and vibrate on startup), it is not a true brick. it should be recoverable.
edit: try this (edited from here)
(Remember to remove PB99IMG.zip from your GoldCard before copying update.zip)
1. Make sure the update.zip (NOT update.zip.zip!) file is on your goldcard and correctly named.
2. Take the battery out first to ensure the phone is powered off. Then hold vol down and press the power button, and hold vol down for about 5 seconds. That will get you into the bootloader even though you can't see it.
3. Press vol down once. This will select recovery.fastboot is already selected
4. Press the power button once. This will start the recovery.this will start fastboot The phone will vibrate briefly.
4a. plug in your desire into your computer. there should be a *ding* sound from the computer recognising it.
4b. Run the .exe you have downloaded. wait for it to finish. TBH I havent installed an ruu from an .exe before. I presume it is pretty straightforward. after this installs you should be able to reboot your device and be away.
5. Wait 20 seconds or so. Then press vol up and the power button and wait a few seconds. You'll now be in system recovery.
6. Press vol down once to select 'apply sdcard:update.zip'.
7. Press the power button once to start the recovery.
8. After a few seconds press the power button once again.
Click to expand...
Click to collapse
if you don't trust the ruu you have got, I recommend you download a fresh one that suits the screen you have (whether it be slcd or amoled).

Yeah I have tried that but I am downloading another ruu as I type.
The hboot on this phone was 0.75. Can you (or anyone else) recommend a ruu to suit?
Thanks for the input. I'll keep plugging away...
Al

alzone67 said:
Yeah I have tried that but I am downloading another ruu as I type.
The hboot on this phone was 0.75. Can you (or anyone else) recommend a ruu to suit?
Thanks for the input. I'll keep plugging away...
Al
Click to expand...
Click to collapse
Just make sure you know which screen version you have and find a ruu file that has a higher build number then the one that you have installed, if its lower you will get a bootloader error
Hope this help!
Sent from my HTC Desire using XDA App

Ok. The phone isn't bricked but I still have the black screen.
The update.zip didn't work as per here but I have successfully installed ruu:
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed
I still get the BSOD (Black Screen Of Death), though.
Anyone have any thoughts on a ruu I should install or do I need to try a different process? Also, how do I find my screen version? I can't see the screen - is there a prog I can use???
Thanks for the help.
Al

alzone67 said:
Ok. The phone isn't bricked but I still have the black screen.
The update.zip didn't work as per here but I have successfully installed ruu:
RUU_Bravo_HTC_WWE_1.21.405.2_Radio_32.36.00.28U_4.06.00.02_2_release_126984_signed
I still get the BSOD (Black Screen Of Death), though.
Anyone have any thoughts on a ruu I should install or do I need to try a different process? Also, how do I find my screen version? I can't see the screen - is there a prog I can use???
Thanks for the help.
Al
Click to expand...
Click to collapse
I dont think there is a program to identify them, I read elsewhere that even HTC doesn't have systems to show which IMEIs were shipped with SLCD or AMOLED displays at this time.
ala the SLCD Brick page, have you tried the ruu they provide? http://shipped-roms.com/shipped/Bra...1.00.32U_4.08.00.09_release_137222_signed.exe
the login and p/w are shipped

nzdcoy said:
I dont think there is a program to identify them, I read elsewhere that even HTC doesn't have systems to show which IMEIs were shipped with SLCD or AMOLED displays at this time.
ala the SLCD Brick page, have you tried the ruu they provide? http://shipped-roms.com/shipped/Bra...1.00.32U_4.08.00.09_release_137222_signed.exe
the login and p/w are shipped
Click to expand...
Click to collapse
You, Sir, are my new idol. That ruu did the trick. The desire is now running super fast and is everything I ever hoped for.
A big thankyou to you and to everyone else who helped guide me through this process.
Cheers!!!
Al

Now you've got that ROM the next step is to go to 2.2 (which you can do now or wait for the OTA updates to start again). Just make sure you leave your gold card in (if you had to use one in the first place)

EddyOS said:
Now you've got that ROM the next step is to go to 2.2 (which you can do now or wait for the OTA updates to start again). Just make sure you leave your gold card in (if you had to use one in the first place)
Click to expand...
Click to collapse
I have saved the gold card for just this thing - the phone had a 4Gb card (my gold card) but I use a 32Gb for my music. <n00b>How do I get the phone to 2.2 (do I use another ruu?) and is it worth it?</n00b>
Al

Click on the version number in my signature (it's a link to the full RUU)

Yay!
Nevermind. The phone is updating automatically. How cool is that?
Thanks Eddy.
I have been having 'successful phone upgrading celebratory' drinks so bear with me...
Is it worth going 2.1 -> 2.2?? I seem to recall reading some where that 2.2 ain't all that it's cracked up to be - or am I mistaken?
Cheers,
Al

It's better than 2.1 IMO

EddyOS said:
It's better than 2.1 IMO
Click to expand...
Click to collapse
Thanks Eddy. I am going for it...

[Q] "Main version is older"-Rom 2.15.118.1 -How to beat it ?

It is an brand Desire, I rooted, I loaded custom rom (worked fine), but the ROM manager screwed up something. I guess, it reflashed the bootloader (or recovery?), but failed.
Now the desire cannot boot. It stucked at the screen, with logo.
The bootloader says :
BRAVO PVT3 SHIP S-ON
HBOOT-0.93.0001
MICROP-051d
TOUCH PANEL-SYNW0101
RADIO-5.10.05.23
If I try to go to RECOVERY the screen goes white, and nothing happens.
If I put the PB99IMG.zip to SD card, the HBOOT finds it, but says, "Main version is older"
Is any way to reFlash the rom ?
What to do ?

have your tried installing a RUU then restarting all over again?

Yep, I tried, in USB_HBoot and USB_FastBoot mode (only available for me) but I`v got error (152 or 170).
Should I use some specific version RUU ?

U should read all NEwbie Threads more carefully again and again ! If u do this nothing can go wrong !U have to easily reflash the recovery! Just use Google!

xtcislove said:
U should read all NEwbie Threads more carefully again and again ! If u do this nothing can go wrong !U have to easily reflash the recovery! Just use Google!
Click to expand...
Click to collapse
From that I read, to make reflash the recovery You need a loaded sytem.
This is what I do not have
xtcislove said:
Just use Google!
Click to expand...
Click to collapse
Or I'm wrong... - Then please help me

Have you tried
fastboot flash recovery "recovery file name".img
Click to expand...
Click to collapse
while in bootloader mode?
*note* you will have to download the android sdk, copy the recovery image into the tools folder, start cmd in tools folder and then type that command in.

Yes, I know sdk - already tried - I get protection error, not flashed.

h3llb3nd4 said:
Have you tried
while in bootloader mode?
*note* you will have to download the android sdk, copy the recovery image into the tools folder, start cmd in tools folder and then type that command in.
Click to expand...
Click to collapse
He has S-on. That will not work.
I think you need to try and find a rom which contains your HBOOT and try and flash that.
Sent from my Amiga 500 using Workbench

Right my bad
anyway, have you tried other PB99IMG.zips ?
find more here
http://shipped-roms.com/download.ph...00.28U_4.06.00.02_2_release_126175_signed.exe

http://forum.xda-developers.com/showthread.php?t=768256

excogitation said:
http://forum.xda-developers.com/showthread.php?t=768256
Click to expand...
Click to collapse
As I wrote before: "I am not able to fully load the sytem"

For me it sounds like recovery did not successfully flash from unrevoked - but how can I unscrew this ?!?
Now, I launched successfully RUU under USB_Fastboot !
But I tried a number of stock images-roms (with GoldCard - my phone is brand one) and each time I get error :
140:BOOTLOADER VERSION ERROR - on Desire screen : "Main Version is older"
My rom version: 2.15.118.1
What can be done ??? How to beat it ?

Sorry for the previous inappropriate answer.
So if you can still boot to hboot just install the drivers from here
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
assumed you're running Windows and then root using:
http://unrevoked.com/#desire
After that you can install basically whatever you want (don't install stuff not matching your phone though) from the recovery
menu.
Good luck

excogitation said:
Sorry for the previous inappropriate answer.
So if you can still boot to hboot just install the drivers from here
http://unrevoked.com/rootwiki/doku.php/public/windows_hboot_driver_install
assumed you're running Windows and then root using:
http://unrevoked.com/#desire
After that you can install basically whatever you want (don't install stuff not matching your phone though) from the recovery
menu.
Good luck
Click to expand...
Click to collapse
Unfortunately I am not able to use Recovery option :
As I wrote:
"If I try to go to RECOVERY I see logo for 2 sec., after screen goes black and nothing happens (The compters sees the Android USB Devices-My HTC)."
Any other ideas ?????

You've been told what to do on Androidforums so I'd suggest following that

You mean this :
You have a bit of a problem then. You could try a branded update with a higher release number (e.g. Three's froyo), and then downgrade that.
But I can not find update with higher rel. than 2.15.118.1

pawel_kd said:
Unfortunately I am not able to use Recovery option :
As I wrote:
"If I try to go to RECOVERY I see logo for 2 sec., after screen goes black and nothing happens (The compters sees the Android USB Devices-My HTC)."
Any other ideas ?????
Click to expand...
Click to collapse
Hi! I'm a new member and this is my first post !!!
When the screen goes black, did you try to hold the volume up button when pressing the power button. May be ...
pawel_kd said:
For me it sounds like recovery did not successfully flash from unrevoked - but how can I unscrew this ?!?
Click to expand...
Click to collapse
I think the same happened to me when i tried to unlock my Desire. I juste had te redo it until it worked.

I made a little progress - I have access to recovery, then I press VolUp+Power there is op screen:
E:/Can`t open /cache/recovery/command
I tried fake-recovery but its impossible to flash-error - flash aborted.
Can I do something now and maybe and solve my problem?

So, I give up
I`m sending the phone to an authorized service.
We'll see - warranty success or not (
Thanx 2ever1 for time and help

Give it another try, may be...
Sorry mate! Didn't read your answer till now. Did you try other RUUs. There's a bunch of them in that URL: shipped roms (it is somewhere in the forum juste search it) for Bravo.
For me, to upgrade from the stock "Eclair", i used this one "RUU_Bravo_Froyo_HTC_WWE_2.10.405.2_R_Radio_32.44.00.32U_5.09.05.30_2_release_142828_signed" and it worked just fine (before that i upgraded via stock zip to froyo but the unrevoked didn't work). Then i re used the unrevoked3 and it worked in third attempt.
I guess, there was a problem in the way the phone handels the transfer of data (USB dosen't act quick enough to send the right amount of data). So the first time when my phone bouted up, it couldn't get all data from the unrevoket script at the right speed so it continued booting with the old version of recovery prog without routing.
After it worked, i upgraded my radio to the "32.48.00.32U_5.11.05.14" via recovery and zip (found somewhere in the forum) and it was ok.
At least give it another try. It's all yours.

[Q] pls help my wildfire screen goes black

help me pls my wildfire scren goes black but the lights on the bottom are flashing it still vibrate when i power on sometimes i can go to hboot menu but icant select anything my phone doesnt fell maybe its a file that i downloaded pls help....

edlactaoen said:
help me pls my wildfire scren goes black but the lights on the bottom are flashing it still vibrate when i power on sometimes i can go to hboot menu but icant select anything my phone doesnt fell maybe its a file that i downloaded pls help....
Click to expand...
Click to collapse
Never heard of this issue. If i got u correctly, screen goes black with soft keys flashing means screen displays as if opened a black picture. Hboot options inaccessible. Was the os getting booted or not. Check it by making a call to wildfire from other phone. Is ur phone s-off by xtc clip.
Anyway cannot tell u the solution. But coming to the possible ways, u have RUU method and PC49IMG method. And warning, donot upgrade to the official froyo if u r not on it.
Sent from my HTC Wildfire using XDA App

sir im using cm7 and my phone is rooted i remember the last time i used my phone is i download some apps in the market then somebody calls me when i pick up my phone its already a black screen and the 4 buttons on the bottom are just flashing so try to pull out the battery it doest open anymore...

and sometimes i can access on hboot but my phone usually hangs...pls help

Just to be clear: your phone gives the same symptoms (black screen, flashing input buttons) in hboot mode?

sometimes i cant access on hboot i should try so many time if some i got luck i got an access it usually hang help....

I suppose you have preformd a nandroid backup somewere in the proces of you installing CM7 and you have Clockworkmod recovery due to the rooting process by unrEVOked.
Try as many times as you need to boot into hboot, and once there, navigate to recovery. In there you can put back a nandroid backup. In my oppinion, that should fix it.
If you no longer have a nandroid backup, just "reinstall" CM7 trough this recovery as you did the first time.
Erwin

I guess if his phone was s-off, then something error might have happened to the partitions which might be causing the issue. Because problem with access to hboot menu is not related to operating system.
And maybe if what I thought is correct, then an eclair RUU might be the solution (some solution which overwrites all the partitions). But nothing sure.
Sent from my HTC Wildfire using XDA App

Very true, but shouldn't the problem (inaccessable bootloader) manifest itself every time, and not most of the time?
Just brainstorming here, not saying right or wrong ;-) in contrary, I think its a good thing to try!

dare i say could it be a hardware issue?

last night i got luck to wipe all the data and my phone went back to a stock cm7 2.3 but after several min my phone turns blank again now i cant boot on hboot if i got lucky to enter hboot it hangs again

edlactaoen said:
last night i got luck to wipe all the data and my phone went back to a stock cm7 2.3 but after several min my phone turns blank again now i cant boot on hboot if i got lucky to enter hboot it hangs again
Click to expand...
Click to collapse
what do u mean by stock cm7.
As im not using custom roms, this seems something strange and confusing to me.
AFAIK, wiping the data clears the.custom rom.
And u forgot to tell ur hboot version and secure flag (see those in hboot menu). Whats ur hboot version now, and have u used xtc clip to make s-off.
[anyway i think there will be no harm on flashing merely the RUU. So, i think u can make a try of eclair RUU of ur region which has the Radio_13.53.55.24H_3.35.19.25 might be a hope]

bro i didnt used xtc clip my phone is already rooted im in cm7 nightly build how can i use ruu?and how to use it?i cant even boot on bootloader.....

and when i press now on volume down+ power nothing happening i cant go to the hboot....

edlactaoen said:
and when i press now on volume down+ power nothing happening i cant go to the hboot....
Click to expand...
Click to collapse
do u think its a hardware issue????

edlactaoen said:
do u think its a hardware issue????
Click to expand...
Click to collapse
Not sure of anything now. As u said u havent used xtc clip, ur phone will be s-on.
U said that when u faced the issue for the first time, ur phone screen went black on incoming call. That means there os is booted. If it is still the case, I think u can go with RUU, but not sure whether it works or not.
And RUU is an exe file to be run on windows pc connecting the wildfire in charge only mode. It is used for flashing the os. If u want to make a try with the ruu, u can download it from
www.shipped-roms.org/shipped/Buzz/
There u should download ur region eclair ruu which has radio version (u can see radio version in the file name of ruu) same as I mentioned in above post. And pls donot download froyo ruu.
Sent from my HTC Wildfire using XDA App

i downloaded this one http://www.shipped-roms.org/shipped...3.55.24H_3.35.19.25_release_151892_signed.exe am i correct bro?im from the philippines i dont know if this one is for my region....

do i still need to install htc sync????

Htc sync is not necessary if u have installed htc usb driver which will be 13 MB size. Anyone from those two will be needed.
And as there is no phillipenes ruu, that wwe ruu might be the option for u.
Sent from my HTC Wildfire using XDA App

by the way bro i tried to put a sim on my phone and tried to called it and it is ringing so i dont think its a hardware issue am i right?

HTC DESIRE unroot with RUU 2.3.3 failed

Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!

i_cs_u said:
Hi guys.
I know there are several posts already opened about this, but I`ve tried all I read there and nothing worked.
I wanted to send my rooted Desire back for repairs(camera LED broken thanks to a Torch app), and wanted to unroot it before I do.
I`ve read on some posts that u can unroot the phone by running the official Gingerbread 2.3.3 RUU found on htcdev.com (the official RUU), so I downloaded the RUU, installed hTC Sync, installed the Desire`s USB drivers(the same one`s that are required when rooting with Revolutionary).
The RUU started installing, the phone rebooted into the HTC splash screen and the "update" of the RUU started going, both PC and phone showed the cursor of the installing process, and at about 90% the PC gave me an error (update error).
I`ve tried again and again to run the RUU but everytime, it failed. And now, my Desire just won`t boot. I`ve taken the battery out, put it back, turned it on, and the only thing that appers on the screen is the white HTC logo on a black background, with 4 icons in each corner of the screen(looks just like the icon that appears when u plug in the usb cable with USB debugging mode ON).
Volume-down+Power and BACK+Power don`t work anymore, even though I press them, the phone just simply ignores the keys and takes me back to the before mentioned hTC splash screen.
I know this is probably something I did wrong, but if there`s any one kind enough to help me out with this, I`d deeply appreciate it.
Thank you!
Click to expand...
Click to collapse
plug the phone in then turn it on, tell us what it says

bortak said:
plug the phone in then turn it on, tell us what it says
Click to expand...
Click to collapse
It doesn`t say anything.
This is what I do:
1. Take the battery out.
2. Put the battery back in place
3. Try turning phone on using: Volume-down+Power -> the phone doesn`t show anything, it simply takes me to the HTC logo(white HTC logo on black background. It does the same thing if I turn it on using BACK+Power)
If I try running the RUU again, the installer gives me the next message: Error[152]: image update error.
From what I`ve read, this is a radio error which can only be fixed by hTC. Could that be true?
Also, after the RUU gives me the above error, if I unplug the USB cable, the phone shows following:
*************
RUU
Radio_V2 - OK
Splash1 - OK
Recovery - OK
Splash2 - OK
Radio_cust - OK
Bootloader - Bypassed
Userdata - OK
System - Fail-PU
Boot - OK
Partition update fail!
Update fail!
*************
I have the Alpharev CM7 r2 bootloader.

even if it is its covered by htc warranty so don't worry about it

I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.

i_cs_u said:
I don`t think it coveres it, as the Alpharev CM7 R2 bootloader still shows.
Click to expand...
Click to collapse
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.

Yes, I`m still S-OFF.
How do I flash them if I can`t access recovery using Volume-down+Power or BACK+Power?
I`ve downloaded the first one, renamed it into PB99IMG.zip, put it on root of SD CARD, turned phone ON and it takes me to the same htc logo screen as before.
LE
Tried with Android Flasher, but it gets stuck when trying to flash the bravo_alphaspl.img that u`ve given me.
So basically, I can`t enter Clockworkmod, I can`t enter the bootloader menu by turning on phone usine Volume-down+Power / Back+Power, and the phone is stuck in the HTC logo, while still S-OFF-ed, also the 2.3.3 official RUU gives me the error at the end of the installing process.
Does anyone have any idea what I could do?

Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.

i_cs_u said:
Bortak, one million thanks for the help, patience and the time you`ve wasted.
I managed to pull it off in the end.
My desire lives again
And hey, if ever in Romania, let met know, got a couple of beer cases with your name on them
Thanks again, dude!
Peace.
Click to expand...
Click to collapse
Haha it's cool dude but if I ever visit I may holla at you for some of those beers though

I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?

Flash bravo_downgrade.img and then the RUU.

Holabalola said:
I have the exact same problem as i_cs_u.
I tried to use an RUU to install 2.3, I have alpharev cm7r2 installed and I get stack on the same step as i_cs_u. I successfully flashed bravo_alphaspl.img with "fastboot boot bravo_alphaspl.img", but which partition do I flash bravo_downgrade.img to?
Click to expand...
Click to collapse
bootloader/hboot/spl

Nevermind, I got it to work

So write how to help others and if we helped you, use the thanks-button.

bortak said:
oh you're still S-OFF?
You're automatically in fastboot when you turn on since your phone is like that so just turn it on, plug it in first flash this and then flash this, Then run the RUU again.
Click to expand...
Click to collapse
Thanks for this. Returning desire tomorrow (switching networks) and forgot to resize and downgrade hboot before running ruu. Good job I ran into this thread for a reminder!

hey, i have a same problem as i_cs_u and dont know how to solve it, can someone give me explained proces?

Did you read the whole thread????

yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?

HTC_Desire_luka__ said:
yes but he says that he cant do anything and then in next post he says its solved. i dont know how he solved this?
Click to expand...
Click to collapse
He probably figured out that he has to use the fastboot flash boot *name of img* command or Android Flasher on that screen with the 4 ! At the corner instead of renaming to PB99IMG and attempting to flash it on the phone.
Sent from my HTC Original Desire with Android 4.0.1 ICS using Tapatalk

but i dont know how to do it from fastboot. i need an explaination of the process.

Help ME! :(

My g2 only charges when connected to the computer and i cant sync nothing! I cant look at my files!

How do you expect someone to help you when you don't give any meaninful information?
U rooted etc etc etc
Sent from my HTC Vision using xda premium

i supposed you rooted your phone... HTC Sync won't work anymore if you flashed a custom ROM...
and please give us more info... what u tried, what did u do...
—————
|RIROZIZO|
—————

ummm i got the phone used i dont know if the previous user rooted it... im on android 2.3.4... should i just factory reset it?

sebas81 said:
ummm i got the phone used i dont know if the previous user rooted it... im on android 2.3.4... should i just factory reset it?
Click to expand...
Click to collapse
i recommend going to an IRC client, connect to freenode, go to channel #G2ROOT and talk to the guys there... they could help you
—————
|RIROZIZO|
—————

You really haven't supplied any useful information, where we could even begin to try to help you.
Have you connected your phone to your computer successfully before, and only recently not working? Did you change anything?

redpoint73 said:
You really haven't supplied any useful information, where we could even begin to try to help you.
Have you connected your phone to your computer successfully before, and only recently not working? Did you change anything?
Click to expand...
Click to collapse
no it has never connected successfully i know what im talking about lol ive rooted a htc hd 2 (other phone dont get confused) before i just cant get it to sync to the computer. It does charge though

sebas81 said:
no it has never connected successfully i know what im talking about lol ive rooted a htc hd 2 (other phone dont get confused) before i just cant get it to sync to the computer. It does charge though
Click to expand...
Click to collapse
Well, apparently you don't know what you're talking about. There is no such thing as rooting on Windows Mobile. You're talking about HardSPL.
Did you install the HTC drivers or HTC Sync?

To find out whether your phone is rooted go into the bootloader (turn phone off, then hold volume down when you power it back on). When the bootloader starts up if it says "S-OFF" at the top of the screen you are rooted. If it says "S-ON" then you are not.

jgummeson said:
To find out whether your phone is rooted go into the bootloader (turn phone off, then hold volume down when you power it back on). When the bootloader starts up if it says "S-OFF" at the top of the screen you are rooted. If it says "S-ON" then you are not.
Click to expand...
Click to collapse
i got info and its rooted... there is is an factory reset button
I got HBOOT...
Hboot0.82.0008
my Radio is-26.13.04. 19_m

I just want to be the little italian man (mario) i need to insert roms

you could still downgrade with PC10IMG.zip file (download link in rooting guide on wiki). Than it should be working fine - but you loose root!
(last time I was rerooting it took me less than 5 minutes, so it should not be such a big problem )

anyother thoughts?

sebas81 said:
anyother thoughts?
Click to expand...
Click to collapse
Try a different computer/USB cable?
Can ADB see your device when it's plugged in?
Are you S-OFF? If so, try flashing a different ROM and see if the problem goes away.
Like others said, too difficult to definitively say what's going wrong without you providing some more information.

tun4f1sh said:
try a different computer/usb cable?
Can adb see your device when it's plugged in?
Are you s-off? If so, try flashing a different rom and see if the problem goes away.
Like others said, too difficult to definitively say what's going wrong without you providing some more information.
Click to expand...
Click to collapse
i am s off

how do you flash a custom rom, im stupid and cant find it :'( and btw this has to be through an sd card cause i think cant do nothing with my usb :/

do you have root permitions ? if so - download rom manager (at market), at first click on flash clockwork recovery and when its done take "download rom" - choose which one you want to and follow the steps that will rom manager tell you.
otherwise you could (after flashing recovery) put some rom to your sdcard, go to the recovery (power button + volume up; take care to not have pc10img file on your sdcard in that moment) - go to the recovery, wipe data /cache, advanced - wipe battery status / dalvik; back , instal zip - choose zip file with rom - and you are ready to go.

... says an error occurred while attempting to run privileged commands D:

i do have recovery mode what can i do with that?

otherwise you could (after flashing recovery) put some rom to your sdcard, go to the recovery (power button + volume up; take care to not have pc10img file on your sdcard in that moment) - go to the recovery, wipe data /cache, advanced - wipe battery status / dalvik; back , instal zip - choose zip file with rom - and you are ready to go.[/QUOTE]
Is there a guide for this?