Related
Hey guys,
I was using Unsigned-Hard-SPL-Diamond-OliNex to flash b4 installing the new rom. it is showing 100% done and my phone reset, and all look fine...
however when entering bootloader screen it is showing me the version as 1.34.00 (sth like this), and check from the rom in the setting of the phone..it is still 1.34.xx (the original rom).
I was following the steps from some posts in the forums...but still the same..
Can anyone please help? sorry i am a newbie to pda phone...
Thanks again guys
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
I have a similar problem. When i made HARD SPL everything is ok, but when i try to make a ROM update there is an error massage on the screen. I tried with 2 or 3 ROMs and always the same ****... I downloaded the official one and it's the same... I made printscreen here it is ---> http://img29.picoodle.com/img/img29/4/7/2/f_gggm_0346e0b.jpg any ideas ?
maybe you installed the rom using sspl and hard spl did not install when you tried to install it. Not sure if this is possible.
Let check the Hard-SPL installed:
press volume down and soft reset (small red button) together and keep until comes out the 3 colored band in the screen, read the Hard-SPL version, it must be 1.40.
Let us know, ciao.
that's the windows error message saying it needs to close.. what's the error message the RUU gives.. it should have a number, or description of what happened. sure your download is not simply corrupt?
Well I have downloaded it 3 times already and every time i tried to make ROM update after HARD SPL my device cannot make upgrade and this error massage is on the screen.. I made soft reset after HARD SPL and there was no 3, but 4 colors on my screen...I thought that I ****ed up the phone, but for my luck I'm not hehe. BUT The f***in version is the same:
ROM version: 1.34.831.1 WWE. ROM date: 05/25/08. Radio version: 0.93.25.NS16. Protocol Version: 52.24.25.08H.
Please help, I don't know WTF!?!? That version is just NO COMMENT!
Thanks...
yeah can you please state the exact error message that comes up?
also, can you confirm you have Hard-SPL on your device.. if so, which version? (signed or unsigned)
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Yea after i followed the steps it is working all fine for me. I think my original problem is the way to enter boot loader screen, but then during the flash of the signed rom (1.37.456.2) i found that the version for boot loader is SPL-1.40.OliNex .
Now all is working fine, thx guys!!!
1 more question, if i have the hard spl installed, flashed a new rom. What should i do if i wanna flash another rom? (let say, after RUU-1.37.456.2 i wanna flash 1.37.401.3). Should i sspl and hardspl and install the new rom? Or i just simply install the new rom without hardspl again?
Thanks again!!
no, hard-spl is 'permanent' on your device unless you manually revert to stock SPL or something..
just flash another ROM without flashing Hard-SPL again
racerx_ said:
can you follow the steps here exactly and let me know the result?
hard-spl upgrade guide
Click to expand...
Click to collapse
Could you please stop flashing your site all the way here? Here at XDA there is a lot of info how to flash your phone, it is not needed to flash your site all the time here. One time is enough.
i'm not 'flashing' my site.. if one time was enough he would have already gone through the guide. i didn't even MENTION the site, either, simply gave him a link to the guide. if you take time to read the thread you'll find that it actually helped him get hard-spl on his diamond which is why the site was created so we can minimize these kind of questions and threads in the forums.. if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Thankz guys thatz helpful
racerx_ said:
if you spent more time actually helping people instead of writing ridiculous posts like this maybe we'd have a cleaner and more productive forum
Click to expand...
Click to collapse
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
sumitescp said:
maybe you installed the rom using sspl
Click to expand...
Click to collapse
not possible, at all, and don't try either, you could screw the device up if you try to flash a ROM we signed.
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
Is it me, or does his site look like a rip-off of mrvanx.org ?
Yzord said:
I'm sorry? Ridiculous posts?
I don't take you serious anymore. Saying that i am posting ridicolous posts while you are spamming all the way in here.
I just asked it friendly and now again, stop spamming your site. I find it in every support topic now a days and you are telling ME about a cleaner and more productive forum???
The info you have on your site is the same info as what can be found in here.
Click to expand...
Click to collapse
ya, ridiculous cause there is no step by step upgrade guide with pics in the forum, and yeah all the info was there, but obviously some ppl have trouble reading so i gave him the info he needed. You on the other hand have yet to say anything helpful in this thread. So stop being a troll and post something useful. this will definitely be the last reply i waste on you
Olipro said:
Is it me, or does his site look like a rip-off of mrvanx.org ?
Click to expand...
Click to collapse
i think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
racerx_ said:
...I think it looks like the stock Joomla template that comes with a Joomla installation cause i couldn't find a cool enough template for this site Actually, i offered to help MrVanx add a trinity section to his site before i started my previous site, but no reply so i decided to help some non-hermes users.. this sure is a lot of drama for trying to help people with their noob questions
Click to expand...
Click to collapse
I like the site and the content. Update it always like MrVanx did before to his info site. There's no harm done here.
Hello everybody.
I am new to the XDA Forums i heared about the site a couple of days ago from a class mate.
now a few weeks ago i bought the T-Mobile version of the HTC Touch Diamond. I wanted to start with installing a new rom.
http://forum.xda-developers.com/showthread.php?t=422417
this is the one.. when i try to install it i get a error message.. my old ROM still works but i can't get the new one on it..
is the problem my OS.. windows vista?
or is it a other problem..
i hope somebody can give some information
thanks already
You didnt say if you had first flashed HardSPL? read the sticky here should help
http://forum.xda-developers.com/showthread.php?t=416211
TomMyH1992 said:
Hello everybody.
I am new to the XDA Forums i heared about the site a couple of days ago from a class mate.
now a few weeks ago i bought the T-Mobile version of the HTC Touch Diamond. I wanted to start with installing a new rom.
http://forum.xda-developers.com/showthread.php?t=422417
this is the one.. when i try to install it i get a error message.. my old ROM still works but i can't get the new one on it..
is the problem my OS.. windows vista?
or is it a other problem..
i hope somebody can give some information
thanks already
Click to expand...
Click to collapse
read in my signature for your doubts about flashing & hard-spl
bye,
davide
thanks.. gonna try working it out
Also don't forget to read a small guide explaining ROM Upgrades.
Regards,
Carty..
Hey guys,
I got a problem here.
Every time I start up my device I get the text ''This concludes the beta test of this software release. Thanks you very much for your time and effort in helping make this a great product for our customers.'' And it's stuck on that then.
I can't turn my device off, and when I soft reset my device it goes to that screen instantly even before the PIN-prompt. I don't know what's causing this, I have Dutty's HD Xtreme 1.7 rom installed which I wanted to flash to the 2.0 version but then this started.
How do I turn my device off so I can make it sync with my pc to put the image on it for a new rom? Or atleast make this message go away since I'm stuck on it now and can't do anything with my device.
Help is MUCH appreciated!
Thanks alot!
/A
--woops posted this in themes, will repost in general touch hd forum!
do a hard reset n select a date say a month ago.... then it will let u sync with ur pc so u can reflash
It's a known problem that appeared in Dutty 1.8 ROM it's fixed in 1.9 and 2.0. you'll want to upgrade your ROM
I recommend you to upgrade your cooked ROM, it seems that your ROM is not a stable version
isnt this the time bomb effect on duttys roms he has it in more roms
flash over to a newer version
sunnymiu said:
I recommend you to upgrade your cooked ROM, it seems that your ROM is not a stable version
Click to expand...
Click to collapse
Ive been thinking about installing a new ROM say Duttys new Extreme 2, Ive had a look on the wiki and some of the stickies to see how this is done and it all looks as confusing as hell..
Does anyone know of a process break down on how to FLASH a new ROM ???
I might just give it a go
Jezwick said:
Ive been thinking about installing a new ROM say Duttys new Extreme 2, Ive had a look on the wiki and some of the stickies to see how this is done and it all looks as confusing as hell..
Does anyone know of a process break down on how to FLASH a new ROM ???
I might just give it a go
Click to expand...
Click to collapse
This is a tutorial for the Diamond. It will NOT apply to Blackstone, but the principles are the same!
Hi, I have Eclair on my kaiser in ext2 partition and I like so much it but it isn't too fast, for example if I use the Copilot Navigator it is slow, or many time when I call or use some program it is slow and go to block.
I want an android more fast and I have read it is possible to flash my rom and istall android with NAND.
My questions is:
-if i install android with nand it will be more fast?
-can I return to WinMo and return to the ROM I have now In my kaiser WInMo6.1???? If yes there is a tutorial??
Thank you so much!
P.S. where i can find a tutorial for NAND flash???
Sorry gfucka, but are You really blind? Tutorial is for example in first sticky on this forum...
Moreover there is probably written that You can flash again WM after You go to NAND android.
Oh sorry really really sorry but I'm really tired today and I have watch for other Treah and not the first.
Thanks.
But for the first question? With nand it is more fast??
Don't know how for 2.1, but it seems that 1.6 is slightly faster.
Please follow the rules of the forums and search before starting new threads. ESPECIALLY to ask a question thats been answered multiple times (this includes all of your other threads too). If you are too tired to search or dont have time to search than you shouldnt be using these forums. Please help us all and abide by the rules.
some say it's not faster.
it so fast with 1.6
but 2.1 else
i rebuild 1.6 with my kaiser it so fast ,and i like it very much.
Thread closed. No need for thread due to sticky at top of forum
Hi All
Well, after being without one for almost 5 years ... I have bought a second hand HTC Universal, mine to be specific is the O2 XDA Exec.
Being as it was second hand all I got was the handset and USB cable, no discs, box ... nothing! I am really trying to down-grade the ROM on it. It currently has WM6.5 .. and from what I can tell it is defo a cooked ROM from somewhere. I want to down grade to WM5 so it is faster and I dont need any of this fancy stuff as I will be using it for home automation.
I have done ROM upgrading before on my old HTC Touch HD ... so can anyone point me in the right direction please
Welcome to fora, have a look on my sig link, you´ll find what u need.
really being said by orb3000, you can get it from the link in his signature or you find at http://forum.xda-developers.com/wiki/index.php?title=Universal_ROMS_Radios
Hello all again.
Please please can someone help me here. My HTC Uni is now a brick, stuck in bootloader.
I have done the task 28 55aa and from what I can tell, it did what it was meant to. I cant seem to upgrade any roms tho, I have downloaded 5 so far and all have failed saying it cannot find RAPI.dll ... can anyone help me please?
Sorry, maybe I should explain what I have tired! Might help lol
OK, I bought this of eBay and it came with a really bad home cooked Rom that was really slow and laggy. I wanted to downgrade it down to WM5 again so I picked a ROM of here and set about updating. At this point I need to mention this, I cant remember the name of the rom BUT I DO NOT BLAME the cooker of the rom, any rom cookers or xda developers for the problems I now have ... i did this fully knowing i am doing it at my own risk!
So, I didnt do alot off research and found out later that you need a special driver to flash in windows 7. Since trying to flash my HTC it has been stuck in boot loader. I have tried the task 28 55aa, tried upgrading just the radios and just the roms. Hard reset .. all that I can think and no luck at all.
Some of the roms come wtih "MaUpgradeUt_noID" this works, but the "ROMUpgradeUt" doesnt as it says the RAPI.dll file is missing.
Please can someone help me!
Again, on my sig link you´ll find a lot of help threads for problems like that.
I can recommend you to do a DOC format, instructions on my link as well.
all is well now, thanks orb. without your super guide I'd still have a dead HTC.
For all those who want to know, I had to upgrade my ROM on a windows XP machines ... luckily work surprisingly allowed me to do it!!