Related
@all,
!!!PLEASE KEEP THIS AN INFORMATIVE THREAD!!!!
being part of the tester team, I feel we should collect findings in here, rather than in the "old version 4.0"-thread!
so here we go:
- no problems on my hero (german mdaciii, without wifi)
- no touchflo integrated ( or am I blind?)-- SOLVED
many thanx
thormdac said:
@all,
being part of the tester team, I feel we should collect findings in here, rather than in the "old version 4.0"-thread!
so here we go:
- no problems on my hero (german mdaciii, without wifi)
- no touchflo integrated ( or am I blind?)
many thanx
( @tom:should this not be in your intrest, pls. let me know-I will remove thread in this case )
Click to expand...
Click to collapse
Use finger from the top bar, to the bottom bar
thormdac said:
@all,
being part of the tester team, I feel we should collect findings in here, rather than in the "old version 4.0"-thread!
so here we go:
- no problems on my hero (german mdaciii, without wifi)
- no touchflo integrated ( or am I blind?)
many thanx
( @tom:should this not be in your intrest, pls. let me know-I will remove thread in this case )
Click to expand...
Click to collapse
Touch Flo enable = Simple do a slide from top toolbar on the bar down to the buttom toolbar
Cheers..!
where is the new romm 4.1 for download? please, thanks
@imstill,
Deleted to keep as an information thread only
@tom,
btw.: device information displays rom version as v4.0wwe
thormdac said:
@imstill,
believe me, I am definately NOT blind. (thanx for your comment here)
@tom,
I have investigated more than once: no touchflo nowhere to be found! neither under settings, nor in programs or elsewhere!
btw.: device information displays rom version as v4.0wwe
Click to expand...
Click to collapse
Hey thormdac my friend..!
[email protected] only Joked.Hope u understand.I update support Touch Flo cube not button.
If u don't understand see this video :
http://youtube.com/watch?v=zQBOespJRfU
Cheers...!
and again [email protected] only Joked.U and [email protected] also very good man for me.
I found only two little things:
1- the clock on the top bar is not sinchronized with the htc home clock (when this switch, the first switch about 10 seconds after)
2- every time I make a call the receiver volume is always set at min. also if I set to max.
Anyway, they are not important and Tom is great.
Weehaa... looks great...
I´m really curious about it.
Deleted to keep as an information thread only
Deleted to keep as an information thread only
Deleted to keep as an information thread only
More Findings
1. Touchflo works well without the hardware button...when you finally find it
2. No obvious signs of the auto vibrate sound profile issue, either when adding an appointment or when an appointment come around. Haven't tested the auto profile yet though - just enjoying not having to turn my system sound back on every five minutes
3. The camera seems to work quickly and properly - nothing new or sexy to it, but working is sexy enough for me
4. The touchflo cube config module is better and slicker
5. It feels more stable and a bit faster - highly subjective, I know
6. I thought I had a few issues with ActiveSync at first - dropping connections, USb device not recognised -but that seems to have settled down
7. I haven't yet found anything I could describe as a bug but I'm still looking
Tom's done a very good job here - good work fella! He copped a little unfair flak around 4.0, as did the testers. This is not a commercial release - it's what you want to make of it. If you don't like it, or it doesn't work it's no-one's fault, just your tough luck. That's the risk you embrace when you move off of the OEM ROM. If it doesn't work don't donate - it IS optional - and use a different ROM.
This will do nicely for me in the meantime.
I don't make it for "Donate"
For all : I don't make it for "Donate"
Remember i make it for us.And make it because i like this work...
Have people donated to me and said.He already donated and tell me need share link for him.
I don't want share link because this only beta version.Still have bugs.I need test and Fix it before release v4.1.My Rom always free for all people like my Rom.Donate to me if u like my work, don't donate and tell i need make.. ect ect..
Please understand me...!
thormdac said:
where i come this is also making fun of people!
may it be as it is, I feel like closing this thread--it wasnt ment for gossipping around!
Click to expand...
Click to collapse
You have PM
just a suggestion
Hi tom... everything goes well and works ok except that phonepad input problem.. bythe way i have a suggestion to the cube enabling process.. as far as i know in the actual HTC touch the cube is enebled when your slide the finger from top to bottom.. I think you have reversed it .. in this rom and the previous one exit is by this method.. If you can modify this setting easily can u update in the final version... If u cant also no problem as this rom is great.. Keep up the good work....
cheers and good luck to your studies...
Hi all
AFter install tomtom software whit tomtom Home the button 1 is set whit tomtom.I have copy touchflo.lnk from /windows/applauncher to /windows/startmenu/programs (this file is hidden) and set button 1 for start touchflow now
tnx tom
infido said:
Hi all
AFter install tomtom software whit tomtom Home the button 1 is set whit tomtom.I have copy touchflo.lnk from /windows/applauncher to /windows/startmenu/programs (this file is hidden) and set button 1 for start touchflow now
tnx tom
Click to expand...
Click to collapse
Any question........
if settings/connections/Usb to pc/ Enable advanced network functionality is check my activesync not work
sorry i have solve this problem of drivers on my pc
I just want to say, I would help Tom if I could. My B&B4.0 works still fine.
diego1810 said:
2- every time I make a call the receiver volume is always set at min. also if I set to max.
Click to expand...
Click to collapse
definately cant confirm this! running smoothly here!
One issue,
not Rom related (i think)
installed TCMP 0.72 RC1 and FlashVideoBundle.
When going to www.youtube.com.
Explores hangs.
But it is the only issue i could find
Can anyone point me 3G Dialer OEM package (I personally prefer Diamond style Phone Canvas) which behave normally in QVGA?
I've been trying for some time to build my own ROM for Trinity with only the basic stuff included.
What I miss the most (after the Camera which I recently found) is proper 3G dialer. I've tried doesens and doesens of dialers, but noone is working graphically or functionally proper.
Some dialers are behaving great, but they all have the same problem: after pressing the power button to wake the device they gain the focus and displayed onscreen. Some of them even begin dialing the last number after resume by pressing the power button. If there is no other proper working dialer ... can someone tell me how to fix this bug ?
And please don't tell me how to search the forum ... I've almost read it all article by article
P.S. Why all the cookers "protect" their ROM's from dumping? Why is this necessary? What can I steal ... isn't it all "free"?
osavioro said:
Can anyone point me 3G Dialer OEM package
Click to expand...
Click to collapse
I've attached for you 3G dialer which I've using.
osavioro said:
Why all the cookers "protect" their ROM's from dumping? Why is this necessary? What can I steal ... isn't it all "free"?
Click to expand...
Click to collapse
If you will cook roms for more time you will know why
Thanks ... I'll try it immediately!
Any chance for something Diamond & Blackstone like ?
osavioro said:
Any chance for something Diamond & Blackstone like ?
Click to expand...
Click to collapse
Sorry but I have a fully working 3G dialer, only this one I've posted...
OK ... I found the perfect 3G Video Dialer ... it works perfect ... even the video calls.
The only problem is that IT ALWAYS POPUP AFTER RESUME and EVERY 3-RD RESUME IT DIALS LAST NUMBER.
This is outrageous ... please ... anyone ... how to get rid of this problem?
tomme45i said:
I've attached for you 3G dialer which I've using.
Click to expand...
Click to collapse
It doesent work with my Trinity!
osavioro said:
It doesent work with my Trinity!
Click to expand...
Click to collapse
So flash your trinity with my rom (I have this dialer in my rom) and you will see that it work correctly
osavioro said:
OK ... I found the perfect 3G Video Dialer ... it works perfect ... even the video calls.
The only problem is that IT ALWAYS POPUP AFTER RESUME and EVERY 3-RD RESUME IT DIALS LAST NUMBER.
This is outrageous ... please ... anyone ... how to get rid of this problem?
Click to expand...
Click to collapse
sorry ... there's no way ... not at least if you're not familiar with engineering.. it's all about phcanrc.dll ... this file is responsible for layout of the dialer and the button config i guess - i replaced this file a couple of times ... if we could patch this file to work correctly on trinity we would be done...
sorrily theres no else 3g dialer that works than the one tomme45i already posted - i have tried tons of dialers with my rom - i know it
if you want it manilla style you need to replace graphics yourself ..
nosedive said:
sorry ... there's no way ... not at least if you're not familiar with engineering.. it's all about phcanrc.dll ... this file is responsible for layout of the dialer and the button config i guess - i replaced this file a couple of times ... if we could patch this file to work correctly on trinity we would be done...
sorrily theres no else 3g dialer that works than the one tomme45i already posted - i have tried tons of dialers with my rom - i know it
if you want it manilla style you need to replace graphics yourself ..
Click to expand...
Click to collapse
maybe it's not in phcanhtc.dll (main) or phcanrc.dll (resource) but somewhere in XIP/OEM. That would explain why opal's dialer works in some Hermes ROMs...
Guys, I don't know if this helps, but I've been using 3G dialer from Schen, originally made to Hermes but fully functional with Trinity (I didn't detect any major problems so far). The only minor problem I found is with battery icon; this dialer package replaces your current icon. As for the rest, very stable and functional (I'm unable to test video dialer, though; so I can't say it works, although it tries to make the call and warns about lack of 3G network).
Check here: http://forum.xda-developers.com/showthread.php?t=322463&highlight=dialer
BulldozerPT said:
Guys, I don't know if this helps, but I've been using 3G dialer from Schen, originally made to Hermes but fully functional with Trinity (I didn't detect any major problems so far). The only minor problem I found is with battery icon; this dialer package replaces your current icon. As for the rest, very stable and functional (I'm unable to test video dialer, though; so I can't say it works, although it tries to make the call and warns about lack of 3G network).
Check here: http://forum.xda-developers.com/showthread.php?t=322463&highlight=dialer
Click to expand...
Click to collapse
There are two version of this dialer. One of them goes to Windows folder and does not work either the cab or the oem.
The second version goes to a folder named Dialers. It works ... appart from the part that it is not in the windows folder and it has some minor graphical bugs. I am trying to fix it ... but without any success at the moment.
However there is another dialer that actually works: "Dialer_Touch_3G__v_2_02_By_Duronmarcel" (Attached). Converting this cab to oem does not work for me ... for unknown reasons.
"NiAx Trinity 6.1.70 BlueAngel" (http://forum.xda-developers.com/showthread.php?t=437735) uses this dialer but unfortunately NiAx is still not responding to my question.
g77 said:
maybe it's not in phcanhtc.dll (main) or phcanrc.dll (resource) but somewhere in XIP/OEM. That would explain why opal's dialer works in some Hermes ROMs...
Click to expand...
Click to collapse
Netdrg have ported opal phone canvas to trinity.
http://forum.xda-developers.com/showthread.php?t=409697
Please ask him to publish it here.
Ciao
claros said:
Netdrg have ported opal phone canvas to trinity.
http://forum.xda-developers.com/showthread.php?t=409697
Please ask him to publish it here.
Ciao
Click to expand...
Click to collapse
Unfortunately that's the old well known kaiser-style dialer with an opal-like skin, not the true dialer...
Anyway it's the closest dialer one can have in trinity for now!
g77 said:
Unfortunately that's the old well known kaiser-style dialer with an opal-like skin, not the true dialer...
Anyway it's the closest dialer one can have in trinity for now!
Click to expand...
Click to collapse
I know, true opal dialer works on trinity with our oem dll, but don't have videocall. A lot of dialer works with trinity but don't have some feature...
Netdrg have made a great work
Ciao
@nosedive
@g77
The package attached is working on Trinity.
It contains 3G (ie. video dialing functionality) but it is not active when installed (as a matter of fact I think that this is Diamond dialer but rewritten by HTC for QVGA Jade). At first I thought that it would work with Diamond Video Telephony pack ... but no luck.
There are some lines in the rgu file which contains valuable information ... maybe
Code:
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Shell\Extensions\ContextMenus\AppView\MSCdial\{1AD110A1-B3E6-4CB9-AC0F-69E059AFBFEF}]
@="DPadMenu.dll"
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\DialParser]
"DLL-OEM"="ddcall.dll"
[HKEY_LOCAL_MACHINE\Security\Phone\Skin]
"ext"="\\windows\\phcanhtc.dll"
Because diamond does not have video dial button it has an option in the context menu. I think that what we are facing here is some dependancies being responsible for the lack of the video call option.
Please ... tell me what you think about that.
P.S.
This dialer always shows after resume and sometimes dials last number ... this is issue yet to be solved.
I've tried a solution posted somewhere in the forum ... something about "ShowTitleBarClock" in the registry ... don't work at all.
I've created clean ROM (nothing but the dialer) ... the same story ... this made me sure that this is not some cross-application problem.
osavioro said:
This dialer always shows after resume and sometimes dials last number ... this is issue yet to be solved.
Click to expand...
Click to collapse
I know about this problem on some dialers, but in my case, the problem was a wrong dll files in dialer. Maybe the problem is somewhere else?
tomme45i said:
I know about this problem on some dialers, but in my case, the problem was a wrong dll files in dialer. Maybe the problem is somewhere else?
Click to expand...
Click to collapse
Which was the wrong DLL ?
Another update
I've managed to pop up the "Video call" option of the Opal canvas by adding the DPadMenu.dll from HTC Diamond. Video call is still not workign but I'll test tonight with the Diamond Video Telephony pack.
The dialer is still popping for no reason
osavioro said:
Which was the wrong DLL ?
Click to expand...
Click to collapse
Honestly I don't remember... It was about 2-3 months ago. But the reason in your case could be somewhere else...
tomme45i said:
Honestly I don't remember... It was about 2-3 months ago. But the reason in your case could be somewhere else...
Click to expand...
Click to collapse
Are you saying you got opal dialer working with a dll replacement in original package? If so that's amazing man! Please try to remember which dll was
I'm loving NFSFAN's new Bell ROM, but i'm not crazy about the slide to answer on the phone canvas.
I'm looking for a way to replace the slide to answer / ignore with buttons instead of a slider while keeping everything else the same.
I've researched different skins for this dialer (there are some cool looking ones out there!!) but none of these change the slider.
Any help would be appreciated.
This one works for me; http://forum.xda-developers.com/showthread.php?t=429179. There is also a black version somewhere Google 'Black Minimal Dialer'
I've now been using NFSFAN's ROM for a few days now.
Must say i've gotten quite used to the dialer. I like all of the other features. Especially the "in call curtain". While i'm still not in love with slide to answer I understand the concept of why it was created. If I want to press a button that's what the hardware key is for!!
I wasn't really looking for a new dialer, but i've learnt the slide is an integral part of the package.
Thanks for the response anyways. You were the only one to do so. (everyone else was probably busy shaking their heads!!!)
now mine might sound like a really stupid question, but can I install the opal's slide to answer dialer on my sprint htc vogue ? are all the ## codes working for you on your phone ?
Yes, everything works (911 etc)
In NFSFAN's words, the data connection is not active during a call, it just breaks the data errors.
The dialer is included in his ROM, i'm not really sure if the same one is found anywhere in CAB format. A quick google search for "opal slide to answer CDMA" should yield some results for you.
http://forum.xda-developers.com/showthread.php?t=466519
http://forum.ppcgeeks.com/showthread.php?t=44017
http://forum.ppcgeeks.com/showthread.php?t=53599
and many others!!
Happy hunting,
Jason
thanks jmitr for your patient answer and the links to the solutions.. really really appreciate your patience and yes I just installed it and working fine now.. love the new dialer...
i spoke too sooon... i installed the complete cab by mbarvian and then tried juggaloo's cab but it was for VGA graphics, i tried mbarvian and conflippers cab but that messed up everything...
just mbarvians cab - didn't display the incall screen properly.... it was all greyed out...
now i can't find a single good cab which displays everything like it should... i don't want to do any more trial and error and find out... please help me on this ...
i dont mind not having the canvas - atleast i get a bigger picture on caller screen and thats all i want right now...
I know s2u2 has a large picture to answer the phone with.
I don't use it anymore, I found it drained my battery too fast. With NFSFAN's rom and the opal dialer it isn't really needed anyways.
Sorry none of the links led to anything fruitful, my only experience with this dialer is in the custom ROM. Must say it has grown on me though!!
myshinynewtouch said:
i spoke too sooon... i installed the complete cab by mbarvian and then tried juggaloo's cab but it was for VGA graphics, i tried mbarvian and conflippers cab but that messed up everything...
just mbarvians cab - didn't display the incall screen properly.... it was all greyed out...
now i can't find a single good cab which displays everything like it should... i don't want to do any more trial and error and find out... please help me on this ...
i dont mind not having the canvas - atleast i get a bigger picture on caller screen and thats all i want right now...
Click to expand...
Click to collapse
I've been using this on my Sprint Touch for months now with out any issues. Here's a link for a post I have up at PPCGeeks for you to check out . Please let me know if you have any problems. If you don't want the lock feature, don't install Albert's cab...
myshinynewtouch said:
i spoke too sooon... i installed the complete cab by mbarvian and then tried juggaloo's cab but it was for VGA graphics, i tried mbarvian and conflippers cab but that messed up everything...
just mbarvians cab - didn't display the incall screen properly.... it was all greyed out...
now i can't find a single good cab which displays everything like it should... i don't want to do any more trial and error and find out... please help me on this ...
i dont mind not having the canvas - atleast i get a bigger picture on caller screen and thats all i want right now...
Click to expand...
Click to collapse
I had trouble getting the dialer to work initially also. It seemed to be tied to the rom build that something changed after the 20XXX rom build was released. If I used anything earlier it wouldn't work. If your on a stock rom that may be part of the issue. Not sure, but just my experience in fixing the issue.
It is tied to a shell component.
NFSFAN said:
It is tied to a shell component.
Click to expand...
Click to collapse
Hey thanks for the reply NFSFAN, the slide to answer was the only part of your ROM that I didn't really like......at first. I couldn't imagine going back to the old dialer now.
It is good to learn what's possible and what's not though, thanks again for the answer.
Cheers,
Jason
jmitr said:
Yes, everything works (911 etc)
In NFSFAN's words, the data connection is not active during a call, it just breaks the data errors.
The dialer is included in his ROM, i'm not really sure if the same one is found anywhere in CAB format. A quick google search for "opal slide to answer CDMA" should yield some results for you.
http://forum.xda-developers.com/showthread.php?t=466519
http://forum.ppcgeeks.com/showthread.php?t=44017
http://forum.ppcgeeks.com/showthread.php?t=53599
and many others!!
Happy hunting,
Jason
Click to expand...
Click to collapse
Codes don't work for me on the verizon beta rom. Is it just me or do you have to use the folder rather than the dialer?
Till now i have found just about everything in xda! Even a similar thread for the same problem but no solution at all!
Thing is, my hd takes too long to wake up for an incoming call..resulting in missed calls all the time..Ring starts in about 3,5 tones..!!! It wakes almost instandly (backlight) but it takes a lot of time to draw the picture etc and THEN starts ringing..
[i am on MIRIS V18 wm6.5, using the default WM dialer with the sliders (not htc's one!) and csdev for autolocking after wake up]
I had similar problems in many roms, even 6.1 .. with the fastest one being 1,5 tone then ring.. Its allready too long for me! I have tried some tweaks, i am not using mp3 for ringtone, using instant ring from hdtweak and no ring delay setting etc..still no luck..
What can be done? I know that many users have the same problem, even with stock roms.. Its same for such a device to be able to do everything sooo sweat but not the phone function!!
So any special tricks?? (font, gdi cache etc settings?) i heard that with sktools and advanced configuration tool etc you can do actually much about that!
Feel free to post your experinces as well, hoping that someone can provide us with a solution or a worthy workaround..!!
I've got the same problem, always have to call people back. Mostly takes about 5 seconds before the answerbutton works, while ringtone is already pissing off the other passengers in the bus
I still think the slow buildip is caused by Wisbar Advance, I used the HD Tweak aswell.
Very Good POST yes you are right many peoples have the same problem i have the same problem!
So i try with HD tweak "Ring without delay" i try with Advanced config and etc Again the same really when someone ring me no matter from the ringtone or anything the phone start ringing after few seconds!
I make few test and what i saw is that if the phone is sleeping when someone call you take longer your phone to wake up and ring
then i try again with no sleepy phone, again ring with delay so i can say if the phone sleep he need few seconds to ring like 5 seconds if the phone not sleep he need 3-4 seconds But at all This is serious problem and maybe is time we to fix this!
I don`t see any point this device to be able to do so much things and we always to Upgrade them but the phone function that we use everyday to make us troubles!
I have this problem with the stock room when the phone was brand new, after i flash the phone with Davideuck V 5 have the same and now im with Davideuck v7 and again is the same ! so no matter what kind of room or radio version you use this problem is real... and really the phone ring with DELAY
Will be perfect if anyone can find desigion of this problem and our phones to start ring immediately without any delay !
Thanks
I have been struggling for months with well-known this 2-sec (far more than this !) delay. The HD tweak didn't work for me either. Furthermore, it has been reported that even if this setting is changed, it is self-reset after a soft reset !
The only solution I found is replacing the HD Caller ID with the WM default one. It is very ugly compared to the modern HTC one, but now my phone takes only 1 sec to respond, that is, wake up, show the Caller ID screen and start ringing.
This replacement can be done from the settings of the HD tweak.
Please let me know if this works for you ! I'm running stock ROM.
Yes if we use the default WM dialer the PHONE is very very fast and ring without ANY delay but its very UGLY so maybe the problem is in the dailer!
Like i say no matter what room you use yes its the same for me with the default WM and the phone just think faster than me
Maybe some programers must to chek this out why this heppand maybe the HD dialer is too heavy?
Yes,thats true! But i am using wm dialer, not htc's one!! Still far from fast..(although i am on wm 6.5 where the default wm dialer with the answering sliders looks awesome, its buggy and slow as hell..[because it needs that the phone is locked in order to run so])
So as i asked around in a major greek forum i have found out that 99% of hd users have the same issue! [that 1% doesn't give a s&@t !]
Here too..What can we do about it..?I am starting to think the 1,5 tone delay as acceptable value..[told you i am on 3+ right now!!] Does anybody know if windows 6.5 that lock with external programm [like csdev] on wake up take normaly so long? Ideas...?
it's always not a good idea to fresh new rom too often
coolmicko said:
it's always not a good idea to fresh new rom too often
Click to expand...
Click to collapse
That has nothing to do with the problem man..!
If we could find a way to minimize the load on wakeup!! (so the hd has nothing to load more than the phone function!)is it possible?
Like i told you with the default WM dialer with WM 6.1 the phone ring without delay and is like every normal phone so this mean that the problem is in the dialer..
I think that the HD dialer is too heavy or buggy and this is the reason why take so long to wake up.. the phone!
Maybe some programers must to chek this out what is the diference betwen the default WM dialer and HD dialer we all know what is the diference.. but i mean the diference not how they look like how they are made and all other litle codec files..
So maybe we can find solution to update the HD dialer to be fast as the default WM one..
No matter you are with WM 6.5 and etc.. because till the problem is not solved no matter what room you will use the dialers will be the same made from the same files..
to resolve this we need to know what exactly is the problem to be able to fix it!
Like i say i think that we can find answers in the DIALER but im not programer..
this is very true and this is a very good post gonna supscribe to instant email about it right now ... i think the problem is not only in the dialer i have a stock rom and i had the problem since the very first day but i got a greater delay after installing spb pocket plus while i am not actually using manilla anymore and even a greater delay after installing wisbar advance 3 ... maybe the solution would be in the processor priorities i dont know
So far, i haven't found any solution .
I already made the same post a few months ago :
http://forum.xda-developers.com/showthread.php?p=3902624#post3902624
there's got to be a way guys!!
Some time ago, both sides recording was a total NO(!) for htc devices!! They say it was HARDWARE ISSUE and nothing could be done!(for over a year+) Then .. ICR and..voila! We even got tmc now! !
Is it possible to have the slugiest of all phones?? no way!
I think is a question of time we to find solution for our problem with the phone ringing delay!
Managed to get it to 1,5 rings in the same situation!( as i described before, no rom change etc..i was on 3,5 + rings remember!!)
I installed advanced config tool and played with the phone and performance settings.. performance almost set to max values..(font cache etc..)
Phone settings no delay, end key delay from 3000ms to 0 etc..(there are some settings there, so be sure to know what you are doing or backup first!)
Think i can get it to 1..!which will be extremely fast from what i experienced so far!!
Note: the improvements are for the second+ call after a softreset! The first one is ALWAYS slugish!!
Hi kostasalfa,
Mind posting your Adv Config settings? Thanks.
After long... long search I found maybe a solution:
HKCU\ControlPanel\Sounds\RingTone0
Script value to av0pr
I'm going to test but it seems the true way ^^ (thx to AX3L)
D'rath
Ok .. not a "true" solution but got INSTANT ring! (before the end of the first tone!!)
As i said i was on wm 6.5 using the kinda buggy default lock etc...After my advan.config setting which was an improvement i did the following! Stopped csdev and so the deafult lock! I did go back to S2U2 !! (warning,important: set delay after wake up to 300 or better 400 ms!!) And then i tried resco contact manager!(again!) But there is a new beta free for all of you in their forum!( http://www.resco.net/forums/ShowPost.aspx?PostID=24957 ) Set it to HANDLE INCOMING CALLS! Soft reset.. and voila!! (install s2u2 in device..resco better in sd!)
As i said..not a true solution but i GOT INSTANT RING!!
DONT FORGET TO USE HD TWEAK TO REVERT TO DEFAUL WM DIALER, NOT HTC;S ONE!!!
Try abd tell me if it worked for you!
i use the new energy rom 6.5 standard hav no problems with ring time or receive any late calls or miss calls u guys must check out the roms before loading them
Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.
tatou said:
Thanks for suggesting to try Resco Contact Manager. The new beta version seems to have corrected the incoming call delay. So far, my HD responded just before the first ring ends. Still testing.
Click to expand...
Click to collapse
Good news! Resco did it i think..
(i may try the energy rom as wingtytn suggested but i dont think its a roms issue..Ps:wingtytn try to call yourself from another phone to see WHEN it starts ringing..if you got no issues i would lke to know!you use wm stadar dialer?etc!)
Hi,
I want to point out, this small (cab) found a rom for HD2 Laurentius26 (Thanks) link: http://forum.xda-developers.com/showthread.php?t=1044596, running on a HD MINI. It allows automatic rotation (landscape). I did tests on the main features of HD MINI, from start menu seems to work well. Obviously does not work perfect on home screen and dialer. is useful to me for example, in the Remove Programs screen.....
As Laurentius26 realized, would be nice to create for HD MINI, a dialer (phone keypad) to insert into a rom cooked .... combined with the cab autorotate.
hi, does it work in the sense? i mean for example in the music tab..does it rotate into landscape same as on hd2?
hi, I tried it now because I did not know if it worked, because I do not use Music tab.
It 'clear that they can not run those programs, which have no skin in the landscape. The CAB autorotate changes the (log system) on the instructions MANILA. I think! but inside 56KB adds nothing !!!!!
In fact, I think, Laurentius26 on ROM FOR HD2 added skins to PHONE DIALER to operate in landscape.
As I have said does not work with all programs in rom: dialer (phone keypad), etc. HOME SCREEN. . MUSIC TAB LANDASCAPE in fact it does not work with BSB Tweaks !!!!!
Do not be hard for something that is given for FREE!
First of all there are already a few threads which specifically discuss about this matter with different apps (Probably around 3).
As mentioned above, the problem does not lies on the AutoRotate app but Manilla itself so unless someone is willing to create HVGA landscape Manilla skin there wont be any landscape Manilla view for our HD Mini.
Considering the low activity of HVGA skin and app development, the chance is slim ....
In fact it is so Ahinigami. I cooked a Rom for hd mini. I'm looking at this work, an application that allows autorotate COMPLETE, to be included in ROM.
(As I said above) I opened this thread with the hope, too, that someone could make a skin for HD MINI laurentis26 as it did, at least for the telephone keypad.
But here it seems only .......... : download and install!
Update
And in fact sometimes life rewards bold .......
I was reminded that long ago I published a thread (TUTORIAL MOBILE MAGIC).
From that folder (attached to the thread) I managed to build a (cab package) and fully functional. I think I continue on this road ....
telephone keypad, is it the usual dialer we're using "cprog"?
If yes, it does support landscape mode ....
I just downloaded the dialer to pack kitchens.
then placed on ROM to HD2. but I just did download.
in the little free time I'm looking for a good rom to join HD mini. Now I'm considering O2_uk
anyway .... and now that I think I can do now a (cab package), if I can send you a private pm
UPDATE:
I understood the potential of HD MINI. I spent a little time,
and I made a special cab for PHOTON. is the dialer pad (telephone keypad) that I said above.
From the first test seems to work fine (I used MOBILE MAGIC) is enclosed SCREENSHOT 2/ 3 / 4. Thanks to Ahinigami to the stimulus.
removed in error
Hi.
Thanks for Auto-rotate
If you create a cab , please upload it ...
If you're planning to cook AutoRotate app into your rom, I suggest using simpler and smaller app specifically just for this purpose.
I've tried the cab you attached in the first post and it was quite buggy (Sense tab is not functioning properly such as alignment) and without any blacklist/whitelist feature.
On the other hand Mobile Magic (Beta) is a rich feature app but comes with larger footprint.
If you've the time, pls do try out ChangeScreen. It has a simple and easy to use interface and smaller footprint.
-----------------------------------------------------------------------------
Btw, if you're planning to include AutoRotate app into your Rom, do you plan to allow just a few selected app such as Shell32 (Start Menu), dialer, and Sense (When possible)?
Some programs are not rotate friendly and will stop working properly once rotated so you should take this into account too.
Hi Ahinigami ,
ChangeScreen I tested (I did not know) but absolutely bad (on my rom). It should immediately crash and lock system. I could not even evaluate the memory usage when this program is resident in memory.
However, I'm working on another program, and I am considering just the memory used, depending on the version used the same program. In fact, the features that I want to achieve are: the fluidity of the graphics, speed, low memory but also the workers!
For the delay on the dialer cab I apologize! Patience!
But I do not eat with it! I do this for a hobby ...... but I also have my job!
For tonight than upload a new thread in the dialer pad and the cab to rotate + tutorial. Afternoon do the last test and upload!!!
I see, take your time .... Having a new developer for HD Mini is a good news itself for me.
There is nothing I can do for you but I could at least help you to try out your new app and rom when released.
Ahinigami Thanks!
is a pleasure for me to be of help! Experience together!
About go to the link: http://forum.xda-developers.com/showthread.php?t=1064807
I hope good news .... for you ..... for you all.
Hola, great work you´re doing here
I´ve been comparing the Mini and the HD2 for a while now, and even though I´ve also achieved to rotate (force rotation) Manila/Sense, it´s not ported to landscape yet (7c60907d_manila, 22e41977_manila, 14394200_manila) and has never been. The fact is that we should have to decompile and mode some of the manila core files for it, assigning in those files the corresponding positions for the elements...
Now, if all you want to do is to be able to rotate everything else, that´s easier since a few reg entries will do that for quite some apps (see L26 rotation cab) OR by using a very simple and powerfull app like xHook or xtask. I use it on both my Mini and HD2 (yep, with Laurentius beta ROMs) and I can rotate "on demand" everything (except sense) by simply assigning the winflag softkey to the rotation of 270 degrees within xtask
Hi BHS_ Interceptor,
Thank you very much.
You gave some very interesting news!
I think it is the right way, ......
In fact that's what I'm trying to implement. From your suggestions, I will try to work .... because I want to get the final result that you wrote above. Well.
oregon69 said:
Hi BHS_ Interceptor,
Thank you very much.
You gave some very interesting news!
I think it is the right way, ......
In fact that's what I'm trying to implement. From your suggestions, I will try to work .... because I want to get the final result that you wrote above. Well.
Click to expand...
Click to collapse
Hola Oregon, glad my post was useful. If there is anything else I can do, just let me know.
Btw, if you simply use the reg keys and also enable autorotate, the behaviour on the Mini will not suffer except on Sense. You would have to add a lot of exe´s to the white list and after installing new apps, some of this would have/need to be added as weel. Using xTask/xHook, you don´t have to worry about white list nor anything else, even about registry, since it rotates on demand what ever and when ever you press the set Key. You can also assign another key for it, but I like the win flag since we already have another one right below the softkey. If you replace the winfla icon with a "rotate" icon" then all looks perfect as well
Btw, on my HD2 (I´m also a member in Laurentius Platinum Beta team) I have assigned the button through the "build in" taskmanager Leo is using for the ROM...