Develop Bugs

Calls being dismissed by lock screen.

Hello,
Loving my desire but this problem is really annoying,
Every time I take the phone out of my pocket it's slide the phone upwards so the call is being dismissed.
Any chance I can change that?
I'm running a rooted phone.
Thanks.

I agree on this, It's quite annoying.
I've seen some apps that change the lockscreen, but most of them consume memory and/or a lot of battery power. A free app would be preferred.

why isnt your screen off? when you go to put the desire in your pocket press the power button on the device quickly and it will turn your screen off and also lock it, there is no need to have the screen on whilst in your pocket is there? this is also power saving on your phone, hitting the power button again will then switch it to the lock screen once you have taken it out of your pocket.

haggisuk99 said:
why isnt your screen off? when you go to put the desire in your pocket press the power button on the device quickly and it will turn your screen off and also lock it, there is no need to have the screen on whilst in your pocket is there? this is also power saving on your phone, hitting the power button again will then switch it to the lock screen once you have taken it out of your pocket.
Click to expand...
Click to collapse
This is when a call comes in. When a call comes on the phone wakes from sleep mode.

[Q] power button issue?

Hi all,
does anyone sometimes have to press the power button (when phone is completely turned off) twice (2 presses to turn on) sometimes?...
so just to confirm
- handset is off
- push power button once (sometimes doesnt come on
- push for second time (and powers up)
im defiantly pushing for long enough
iv have no issues with the button at all when in the UI or when locking/unlocking display
iv done a few tests where i have turned off. then went to switch on, with the same pressure and sometimes it starts with one, sometimes it starts with two presses,
do u think this is a fault? anyone experience this? normal?
just checking...
thanks heaps!

I had the opposite on my first one. When I pressed the power button to turn screen off, the screen went black for 1 sec and jumped back on lock screen.

brodiecb said:
Hi all,
does anyone sometimes have to press the power button (when phone is completely turned off) twice (2 presses to turn on) sometimes?...
so just to confirm
- handset is off
- push power button once (sometimes doesnt come on
- push for second time (and powers up)
im defiantly pushing for long enough
iv have no issues with the button at all when in the UI or when locking/unlocking display
iv done a few tests where i have turned off. then went to switch on, with the same pressure and sometimes it starts with one, sometimes it starts with two presses,
do u think this is a fault? anyone experience this? normal?
just checking...
thanks heaps!
Click to expand...
Click to collapse
to switch on device you have to keep pressed power button for few seconds or u can keep it pressed until you see lights at the touch keys.. :good:

Hi
brodiecb said:
Hi all,
does anyone sometimes have to press the power button (when phone is completely turned off) twice (2 presses to turn on) sometimes?...
so just to confirm
- handset is off
- push power button once (sometimes doesnt come on
- push for second time (and powers up)
im defiantly pushing for long enough
iv have no issues with the button at all when in the UI or when locking/unlocking display
iv done a few tests where i have turned off. then went to switch on, with the same pressure and sometimes it starts with one, sometimes it starts with two presses,
do u think this is a fault? anyone experience this? normal?
just checking...
thanks heaps!
Click to expand...
Click to collapse
I don't think many people would turn their phone completely off so haven't found the issue.
When you power off what will be happening is the phone is off as much as it can be, but these buttons are soft off, the battery is still connected and some power must be drawn to run the power circuitry to detect the button being pressed again to signal to power back up the phone, in the same way when you turn your TV off by the remote, power is still drawn to run the remote sensor on the TV.
To keep the drain on the battery as low as possible so the battery isn't completely discharged over months of storage I suspect the power chip waiting for the on signal again is only sampling every so often to save power so it can be in super deep sleep state. This means depending on where in this cycle you are when you press the power button it might seem like it isn't responding, so typically you have to leave it depressed long enough for it to be "seen".
The better option is to just to put your phone into flight mode if you don't want to be disturbed or want the phone off. I do this overnight and lose no battery power by the morning, so it is as good as off. You can add a button to your home screen to do this quickly, widgets are included already for that.
Regards
Phil

Mine does the same thing.. Sometimes it does it with waking up from sleep also.
Sent from my HTC One X using xda app-developers app

[Q] Can you only use the power button to unlock the screen?

Can anyone unlock the phone using home button ?
it only works with the power button for me. The home button works when the screen is on but not when , the screen is turned off the phone flashes for brief second then screen goes off, i noticed this before i downgraded and after it has always been like this, its like I am double tapping it when I am not . I get the same response if i double tap the power button

Just to be clear. Are you asking if the screen turns on and stays on after pressing the Home button while the screen is turned off?
I'm on unlocked 3.6.8 and if my screen is off, I can press the home button and the screen turns on (still have to slide to unlock or enter PIN). However, the screen does stay on for a period of time and I can sit and look at the lock screen, view the dynamic perspective on it, etc until the timer eventually shuts the screen off again.

If the sensor located below the front camera is covered up with a screen protector or anything else then you can have problems turning the phone on with the home button or the camera button.
All screen protectors with a hole for the sensor should work on the phone. Screen protectors without a hole for the sensor may or may not work. My screen protector doesn't have a hole for the sensor but I don't have a problem turning the phone on with the home button. But if I cover the sensor with my thumb I can not turn my phone on with the home button.

Weird problem with screen/power button

Background -
I bought this OnePlus 5T with a smashed screen to fix.
Paid 70 bucks for it plus the screen is just shy of 150 in total.
I was able to replace the screen and frame which was a little more complicated than I anticipated, but it ended well and the phone seems fine, although the screen quality isn't as good as stock.
***Problem - it seems that for unknown reasons, after turning off the screen pressing using the power button, screen becomes black and won't turn on, not until i hold the power button for ten seconds and restart the phone the hard way. Then the phone turns on and starts working again, but if I turn the phone off with the power button then it won't turn on again. I can tell the phone is working behind the black screen, vibration working, notification light working. But Everytime I turn the phone off with the power button I have to hard reboot the phone to get it back on again. Once this starts happening I have to factory reset to get the power button functioning normally again. It will work normally for a day or two and then out of no where the issue comes back again after pressing the power button - screen won't turn on.
Could it be software? I know it might be natural to suspect the screen is faulty, but the screen works normally until I use the power button to turn it off, and then works normally again for a couple of days after a factory reset ...
Thoughts ?

Power button doesn't wake up the phone immediately. 1 minute delay???

Hi all,
Problem: When the phone is turned on, locking the screen works beautifully. Once the display turns off, pressing the power button doesn't do anything... for about a minute. Then the display wakes up and everything is fine again. It doesn't sound like a hardware issue, as the power button works in recovery, and to lock the screen. The screen turns on instantly in recovery and when powering on the phone, so I don't think it's the screen's problem either.
Does anyone have any ideas to fix this problem? Thanks!