heartsurfer008 said:
Well I am desparetly trying to cook a NAND build for my HD2 but there is pretty much less info available for me [a big NOOB in cooking] to try out my luck at cooking..!!!
So I'll appreciate if someone would put some light on it..!!!
PS: - I would appreciate if somebody can provide a detailed info..!!!
Click to expand...
Click to collapse
Finally the tutorial
Make your own Android Build for the HD2 by domineus I have always lived by these words- if you give a man a fish, he can eat for a day; but if you teach a man to fish you can eat for a lifetime. Android on the HD2 has always been an interesting thing for me and I know a lot of people that want to create their own builds, but have no idea how. If you ask a build creator or maybe someone in the htc-linux-chat how to get started, there may not be an answer. In fact, some of the perplexing behavior has left me puzzled in several ways - as if how to get an android build is a vaulted secret of knowledge like the holy grail. To be honest, it's not. It's a bit of hard work, a few nods in the right direction, and ultimately it's a community involved project. Just like miui development is a community project spanning actual continents to get this thing on our device every single week! It has led to a lot of questions, in my inbox, of how to begin. For a long time, the answer to the question was not answered until Cass helped me out. I want to do the same and contribute how to get a build of miui (or any android build) to the HTC HD2.
Things you will need
In order to properly start android development, it would be a good idea to make sure you have the following (a lot of it is no duh when you think about it)
A computer running linux
I can't stress that enough. While there is a lot of things you can do in windows, you will need some sort of linux distro in order to get android properly running on your HD2. There are a lot of linux distros you can use; with many using ubuntu as it is the most user friendly. I use Fedora and I am quite happy with the results. It's simple and effective. It gets the job done. Get a distro that you feel can get the job done.
Android SDK - either windows or linux
Android SDK is something that can be freely accessed and downloaded from the following location:
http://developer.android.com/sdk/index.html
It is a developer environment, but probably the most important thing you can use here (for the time being) is logcat. Logcat provides you to visually see the libraries and files working together to get android to work as well as if you run into an issue, it is the first thing you should resort to. For instance, boot reloop? Take a look at your logcat and try again.
A kernel
There are quite a few kernels available for android previously and they are divided into evo kernel or nexus one kernel. Many builders have transitioned to an evo kernel for PPP and a few other nice details but it is totally up to you. I highly recommend hastarin's kernel. For most of the time, it works well. But as you have noted, on MIUI, it hasn't been working as fantastic on other builds.
Donor Files
This is a bit difficult to find because it appears that the files that work best are nexus one builds without CM6.1 modification. So far, only one chef has that and it is tytung's nexus one build. Regardless of whose files you're using (e.g. tytung or darkstone's system which is the preferred choice) you will need a well working android build. You will be pulling several files in order to port.
MIUI itself (well any build honestly just miui is a good example)
This is a given. However, if you download from miui.com you will probably have an untranslated rom with odex files. That's bad. And in Chinese! It would be a good idea to browse the English forum for a deodexed rom with appropriate english translation (apps and frameworks)
-If pulling files from windows, you will need this
system extractor
http://uranus.chrysocome.net/linux/explore2fs-old.htm
I use that if I download in windows. It's relatively straight forward and it allows you to pull the files you need from the system.ext2 you're using and copying them to folders necessary.
build.prop
This you will need. You can find one here:
http://www.multiupload.com/B59IU3S6XY
Patience
Probably the most important thing. One thing I have noticed is you need patience to make it through. Sometimes, your build works, sometimes it doesn't. And it is difficult to still keep going. But gotta pull it all in and keep trying...it does pay off.
Okay so you have your files, a nice linux distribution, your build you want to port (MIUI preferrably) and you're ready to go. Now it's time to begin the process!
Step One - The Setup
I usually grab my files in windows before transitioning to my linux distro to finish the process. If you using windows 7 and you are using explore2fs, you will definitely have to right click on the exe and make it compatible by selecting compatible with windows vista. The file should also need to be run by administrator. If you don't know how to do that you can google compatibility in windows 7.
First thing is first. Create a new folder, you can call it donor_files if you want because name is arbitrary. The most important thing is to just name it. Within that folder, create a new folder called system. Enter the system directory and create a new folder called etc. Within etc, select Once that is done, create a new folder within etc called firmware. Once completed, return back to the system folder, create the folder called lib. In the lib folder, create a new folder called hw. So your folder should look like this:
Folder Name
-system
--etc
---firmware
--lib
---hw
So far so good? Excellent. Now, if you're in windows you will need to do a few things. Extract the system.ext2 of your donor build and place it somewhere you will remember (like your desktop). Now open up explore2fs, select file, and open image file. Under files of type (drop down), select all files and navigate to your system.ext2 file. You should now see the ext loaded on the left side of the program's workspace. Located is a very small + that allows you to view all directories in your ext2 file. Click that.
You will see several system folders on the left and files on the root. Since you haven't selected a specific folder, in the right hand view, you should see the file build.prop. If you did select a folder (like app) you will see some files. And that's okay too. Get a feel of the program.
Now you will do a test file pull. On the left hand side, select the folder etc. On the right window, you will see several files. We want AudioBTID.csv. Once you see the file, right click on AudioBTID.csv and select export file. Navigate to the donor file folder (or whatever you named it) and place the file in system/etc of that folder. Congratulations you just pulled your first file! But you will need a lot more files. Within the same directory, pull gps.conf, hosts, media_profiles.xml and the ppp folder. Now, navigate to firmware and pull the following files:
BCM4329B1_002.002.023.0360.0362.hcd default_france.acdb htcleo.acdb
BCM4329B1_002.002.023.0436.0439.hcd default_nel.acdb yamato_pfp.fw
bcm4329.hcd fw_bcm4329_apsta.bin yamato_pm4.fw
default.acdb fw_bcm4329.bin
Ideally you should not be able to find htcleo.acdb. You can find it here
http://gitorious.org/xdandroid_leo/q...eo/htcleo.acdb
Now in explore2fs, go to the lib directory and pull these files and place them in your lib directory:
libcamera.so
libcamera_client.so
libcameraservice.so
libhtc_ril_wrapper.so
libmm-omxcore.so
liboemcamera.so
libomx_aacdec_sharedlibrary.so
libomx_amrdec_sharedlibrary.so
libomx_amrenc_sharedlibrary.so
libomx_avcdec_sharedlibrary.so
libomx_m4vdec_sharedlibrary.so
libomx_mp3dec_sharedlibrary.so
libomx_sharedlibrary.so
libomx_wmadec_sharedlibrary.so
libomx_wmvdec_sharedlibrary.so
libOmxCore.so
libOmxVdec.so
libOmxVidEnc.so
libqcomm_omx.so
libstagefright_omx.so
Once those files are pulled, navigate to the hw folder of the system and pull the following files:
sensors.htcleo.so
lights.htcleo.so
Once those files are pulled, you can save your donor files to a flash drive and then boot into your linux distro. Login to superuser in terminal. For fedora, the proper method involves typing in su --login and entering your password you set up. Minimize your terminal window.
Extract the miui (or any other build) to your desktop (the focus is the system folder). Ensure the rom is deodexed and in your own language (if its miui, you will have to apply the proper language translations). Now copy the files you pulled from your donor build and apply it to the appropriate folders (usually a copy and a paste-literally). In this instance there will be duplicate files, overwrite them. That's the point! Do not forget the build.prop file I linked to earlier. You should add that to system folder.
So the files are copied, the next step is to restore the minimized terminal window (the one that is logged in as root). cd to where your system is located (not to the system folder itself). Now you will have to enter the following commands in terminal
chmod -R 777 system/etc
chmod 755 system/bin/*
chmod 755 system/xbin/*
rm system/etc/firmware/default*acdb (if you have sound in call issues)
touch system/etc/ppp/active (If you have latest wrapper and need ppp)
chown root:2000 system/bin/pppd
chmod 4755 system/bin/pppd
chown root:root system/xbin/su
chmod 4755 system/xbin/su
chown root:root system/xbin/hci*
chmod 4755 system/xbin/hci*
dd if=/dev/zero of=system.ext2 bs=1048576 count=256
mke2fs -F system.ext2
sudo mount -o loop system.ext2 /mnt2
cp -rp system/* /mnt2
sudo umount /mnt2
A few words on this that I must bold. the /mnt2 directory may not exist. If not, try mnt, that usually works
Once this is done, you will have a nice system.ext2. The only thing you'd need now is a rootfs, a kernel, clrcad.exe and a startup.txt file. Once that is done, you can test your build out.
Any questions
Special thanks to Cass and the htc-linux-chat for the few pointers they gave me.
The guide is by "domineus - http://www.miui-dev.com/" & I take no credit what so ever
Thanks to "white-energy" for giving us the link..!!!
Hope to have many more Chief's for our HD2, so that we [especially me] can satisfy our hunger to try different builds/ROM's..!!!
Happy Cooking..!!!
PLEASE PRESS THANKS IF YOU FOUND THIS THREAD USEFUL..!!!
+ 1... nobody wants to share information?
I don't know if this help but you can try
http://forum.xda-developers.com/showthread.php?t=897940
These kind of thread pop up once in awhile, but it's going no where, I've never seen well known chef show up in this kind of thread.
knowledge is power, maybe they dont want to share the power
Can anybody out there give us a step by step guide for cooking a NAND ROM for HD2..???
http://www.miui-dev.com/forums/showthread.php?481-Howto-Make-your-own-Android-Build-for-the-HD2
Instead of making a ext image, you should make a yaffs image.. so it can work on Nand
white-energy said:
http://www.miui-dev.com/forums/showthread.php?481-Howto-Make-your-own-Android-Build-for-the-HD2
Instead of making a ext image, you should make a yaffs image.. so it can work on Nand
Click to expand...
Click to collapse
Thank you, please check post 1..!!!
I've been looking for something like this. I want to create my own build for the recovery flasher. I guess the only thing needed would be how to convert from regular nand to recovery.
Thanks bro.
velayo said:
I've been looking for something like this. I want to create my own build for the recovery flasher. I guess the only thing needed would be how to convert from regular nand to recovery.
Thanks bro.
Click to expand...
Click to collapse
I was lookin for the same & credit goes to domineus & white-energy
& "white-energy" comes up with a NAND ROM..!!!
Congrats..!!!
white-energy said:
http://www.miui-dev.com/forums/showthread.php?481-Howto-Make-your-own-Android-Build-for-the-HD2
Instead of making a ext image, you should make a yaffs image.. so it can work on Nand
Click to expand...
Click to collapse
Are you sure its the only difference? Are the nand drivers stored only in the bootimg/initrd and not somewhere in the system.img?
yes or no will do for me thx
Is there a way to edit system.bin files, that comes with the NAND builds. I suppose that is where the ROM is. I want to unpack, edit the included apps and repack. How it is done? How the bin file is done. Google does not give any satisfiable links, did a quick search, though...
i am confused
Which explore 2fs do I download? There are 3 different ones one for binary one for code and optional update source code. I am a noob and tired of not having roms I am happy with. I have windows 7 and xp. I realize this will take time and I am good with it everything thats worth anything takes time.
deckoff said:
Is there a way to edit system.bin files, that comes with the NAND builds. I suppose that is where the ROM is. I want to unpack, edit the included apps and repack. How it is done? How the bin file is done. Google does not give any satisfiable links, did a quick search, though...
Click to expand...
Click to collapse
I think you mean system.img not system.bin
You can extract them with the unyaffs.exe or with the unyaffs command under linux. I have written a guide with attatched utilities here
Additionally birksoffsjunk (seasoned WM guru & chef of ChuckyDroid, ChuckyROM, & Dexter) has made a batch program to make this process easier. It's a work in progress & somethings are still buggy so follow the thread
Between the utility birkoffsjunk made & the tutorial I wrote you should be able to successfully edit & run your own build. Hope this helps.
deckoff said:
Is there a way to edit system.bin files, that comes with the NAND builds. I suppose that is where the ROM is. I want to unpack, edit the included apps and repack. How it is done? How the bin file is done. Google does not give any satisfiable links, did a quick search, though...
Click to expand...
Click to collapse
I think you mean system.img not system.bin
You can extract them with the unyaffs.exe or with the unyaffs command under linux. I have written a guide with attatched utilities here
Additionally birksoffsjunk (seasoned WM guru & chef of ChuckyDroid, ChuckyROM, & Dexter) has made a batch program to make this process easier. It's a work in progress & somethings are still buggy so follow the thread
Between the utility birkoffsjunk made & the tutorial I wrote you should be able to successfully edit & run your own build. Hope this helps.
anyone know how to edit or anything about initrd.gz?
hnamanh said:
anyone know how to edit or anything about initrd.gz?
Click to expand...
Click to collapse
It's an archive that can be decompressed and edited thru linux.
White-Energy use system.bin in his rom
Regarding initr and zimage, there is a guide that you can point me on ?
Thank you
KillaHurtz said:
I think you mean system.img not system.bin
You can extract them with the unyaffs.exe or with the unyaffs command under linux. I have written a guide with attatched utilities here
Additionally birksoffsjunk (seasoned WM guru & chef of ChuckyDroid, ChuckyROM, & Dexter) has made a batch program to make this process easier. It's a work in progress & somethings are still buggy so follow the thread
Between the utility birkoffsjunk made & the tutorial I wrote you should be able to successfully edit & run your own build. Hope this helps.
Click to expand...
Click to collapse
I have only green HTC
Hello
I would like to use Android on my HD2. I was searching and testing many ROMS but I didn´t find any rom which is usable for me. I would like to have a ROM that is without Sense, has Multilanguage support and is on Android 2.2 version.
So I decided that I would make my own.
0) I was reading
HTML:
http://forum.xda-developers.com/showpost.php?p=10291851&postcount=1
and made this procedure.
1)downloaded some ROM from here
2)unpacked this rom in linux with :
Code:
unyaffs system.img
then I got this directories:
Code:
app bin build.prop etc fonts framework lib media usr xbin
3)I downloaded update-cm-6.1.1-N1-signed.zip from CyanogenMod Forum > Downloads > Stable Mod > Nexus One and unpacked. I got : META-INF system boot.img.
4)I copied everything what was described step 0 from directories from step 2 to directory system from step 3
5)I downloaded and copied build.prop from step 0 to system
6) I updated permition like it is described in step 0
7) I created system.img with command : mkyaffs2image . ../system.img
Then I copied this system.img from linux to my windows and put this file in directory in which was different NAND rom. (replaced system.img). After that I flashed my phone and it did not work. Screen was frozen after booting and only green HTC was on display.
Can somebody please help me and give me some advice or some small howto. Does anybody know what can be wrong?
Thank you
Michal Fichtner
I appreciate the guide but damn that is hard to read. It really needs some sort of structure to it, titling proper paragraphs etc.
Hi,
it is possible to combi the dropdown energy widget froom miui and the gingerbread lockscreen into Desire HD Build?
Thats was awesome !
Sorry for my bad english
Hi all,
I am trying to develop a rom but I came along this difficulty: I can't find the sysyem.img. I tried to download a .zip file, only the folder named "system" came in it. And I tried it with a .exe and looked in "%TEMP%" no luck either...
Can anyone explain how I should extract the system.img?
Thanks in advance.
I guess your referring to a nandroid backup really. When you download a rom, it comes in a zip file which you can flash and has only a boot.img file (I think, can't remember off top of my head) so it can boot. It doesn't have anything else. You only see a system.img file when you do a nandroid backup. Everything that is in the system.img file is still the same as the system folder in a zip file.. more or less.
If you do have a system folder, it is possible to convert it using the HTC Kitchen
http://forum.xda-developers.com/showthread.php?t=633246
That should help heaps with ROM development
Can you please explain to me how I can convert the system folder, I don't have a clue.
Convert it how? How do you want to convert the system folder? And why? Might help us out more you know.
On "Theunlockr" (My guide for making a rom) It says
"If you have a .zip file, you can unpack the system.img and boot.img"
I only have the boot.img and a system folder!
And it also says: "If you have a .exe, run it until the first screen and then go to run and type %TEMP% and a rom.zip should be here"
in both cases it is not the case.
So, can anyone help me out please?
im trying to make my own rom trying to try new this out and i was going around taken lil apps tht other roms hads like hulu, mastermind mirror, ect and i dont think i zip it correctly cause when i check the inside of the zip folder the other file is still not zip and i am sure that is a problem right ??? ps im using cwm 3.0 is tht a problem ?
i use this meth...
ok, here it goes.
first, figure out where you want to push your file. i'd reccomend pushing manually in recovery to make sure the file itself works. then, using a tool like 7zip (pc) or betterzip (mac) create a file structure that matches the one on the phone. for example, if you wanted a boot animation to be put in system/customize/resource, make a folder system, customize in that, resource in that, and the bootanimation.zip inside that. now you have the main part. next, make a folder in the root of the zip called META-INF (caps counts) inside that, com, inside that, google, and inside that, android. thats /META-INF/com/google/android/. inside android, you need to place in an update-script. i'd reccomend taking one from another zip and just editing it becasue i still have not figured out a way to make that type of file (unix exec) from scratch. open it up in a .txt editor like notepad++ (pc) or coda (mac) and write your script. here is the baisic script for copying the directory system on the zip to system on the phone (like flashing a boot animation).
copy_dir PACKAGE:system SYSTEM:
CAPS COUNT AND MAKE SURE YOU HAVE AN ENTER AT THE END. IF YOU DO NOT HAVE AN ENTER AT THE END (TO MAKE IT TWO LINES INSTEAD OF ONE, LIKE ISSUEING A COMMAND) THEN IT WILL NOT WORK AT ALL ( E:SYNTAX ERROR IN UPDATE-SCRIPT IS THE ERROR YOU WILL GET)
so put this file into the folder android, and zip it. make sure it is in store only, compatibility mode, if you have such options. then, use an auto signer (or just say zip is not signed and make sure to put sig verification off) to sign the zip. flash, and watch your work magically appear.
the update-script i showed is written in amend. i have no idea how to write in edify bcuz it is much more complicated with the binary and stuff. so dont flash with cwm 3.0+.
i only have 1 thing to say first switch to amon ra amon ra is 1000 times better than clockwordmod
how do i switch?? lol also what if i unroot my phone would tht be a problem?
Jcki4 said:
how do i switch?? lol also what if i unroot my phone would tht be a problem?
Click to expand...
Click to collapse
go here and download the PC36IMG.zip and follow the directions
http://forum.xda-developers.com/showthread.php?t=705026.
as for setting up a rom unzip one to see how it's set up, i have changed a few things in some and zipped it back up and signed it but never built one, sorry couldnt be more help
Hello ,
How can I make CWM flashable zip ?
I'm making mod but I can't make flashable zip
Example : I made icon pack for Contacts , mms, video player. Carry the system folder manually. And set permissions. This is very exhausting. I want to make flashable zip.Please make detailed guide. If you help me I would be happy. Thank you.
Arnadel said:
Hello ,
How can I make CWM flashable zip ?
I'm making mod but I can't make flashable zip
Example : I made icon pack for Contacts , mms, video player. Carry the system folder manually. And set permissions. This is very exhausting. I want to make flashable zip.Please make detailed guide. If you help me I would be happy. Thank you.
Click to expand...
Click to collapse
Scripts for creating flashable zips and signing apk/zip files
Just wanted to share a few scripts that I have created for making things a little bit easier. These are bash scripts so they are only going to be functional in a bash shell such as Linux or OS X. If you're running on Windows then you might be able to execute these in Cygwin but I don't know that for certain. You could simply run the same commands in a DOS prompt. You might have to change syntax a little and manually execute them, but the basic process is the same.
I'm going to assume that you are familiar with adb. If not, go learn about it -- download the Android SDK, install the platform-tools, and make sure you can use it! You will probably want it to be in your PATH variable so that you can execute it at any time from a command line.
The next thing you will need is apktool installed, so that you can extract and build .apk files. This can be found here:
http://code.google.com/p/android-apktool/
Now we can move on to using these scripts. There are three files included inside of the scripts.zip file attached to this post. The zip file contains the following:
1. signit: This script will sign a .zip file or a .apk file. If you send in a .apk file as an argument then it will also zipalign the file. It uses testkeys to sign files. 2. createzip: This script will create a skeleton zip file for you. It will print out some instructions to help guide you with the creation. 3. update-binary: This file will never change. It's an interpreter for Edify scripts -- which is what YOU will be writing! You need to include an Edify script inside of the zip file so that recovery knows what exactly you want it to do. This file should be carried around inside of each zip as it converts your Edify script into something that recovery can actually understand and execute.
You will need to make sure that signit and createzip are executable. I would just use chmod +x on them.
The fourth and final thing you need is testsign.jar. You can get it here:
http://code.google.com/p/zen-droid/d...n.jar&can=2&q=
If you look at the top of the createzip/signit script you will see that the the variable binLoc gets set to /usr/local/bin. What this means is that you should place all four of the above files into that location. If you don't like /usr/local/bin then just change the binLoc variable to point to some other directory where you will store these 4 files, and make sure that directory is in your PATH variable.
We'll start by just modifying some images in a single file. For example, let's modify the battery icons in /system/framework/framework-res.apk. I'm not going to add or remove any icons that didn't previously exist, I'm simply going to change a few of them. If you really want to get into modifying some files then you will need to decompile the file in order to change any corresponding XML files (sidetrack -- if you're curious then look in res/drawable at the following 3 files: stat_sys_battery.xml, stat_sys_battery_charge.xml, zzz_stat_sys_battery_1.xml). I'm going to throw this step into the instructions, not because it's necessary here, but because it's a good idea to know how to do it anyway. So let's try and modify our icons!
The basic steps would be something like what I outline below. Before you try this I suggest you make a full backup in recovery just in case something goes wrong. I have reviewed the steps below several times and even walked through them to make sure they are correct so they should work for you.
1. Get the apk file:
Code: $ adb pull /system/framework/framework-res.apk
Copy this file somewhere safe because we are going to push it back to the phone later (you probably won't want to keep the edits we make in step 3 below indefinitely).
2. Decompile it with apktool:
Code: $ apktool d framework-res.apk
3. Update the necessary files:
Step 2 should have unpacked the file into a folder named framework-res. We want to update the necessary files inside of it. The battery icons are all stored res/drawable-hdpi. Navigate to that directory and look for files like stat_sys_battery_*.png. These are the images that get displayed while your phone is running on battery power. The charging images are stat_sys_battery_charge_anim*.png. If you have a set of icons that you want to use then simply paste those icons in and overwrite the existing ones. You can move on to the next step.
If you don't already have images lined up then we can just modify some existing ones to verify that your changes worked. I'll assume you have the stock MikG battery icons (or some way of knowing what your current charge level is) so take note of what your current charge level is, and then modify a few of those images around that area. For example, if your phone is currently at 65% then maybe you will want to modify stat_sys_battery_charge_anim66.png, stat_sys_battery_charge_anim67.png, stat_sys_battery_charge_anim68.png, etc. Just open up these files in GIMP, Photoshop, or whatever. Don't change their size but just change something -- maybe change the color from white to green. Or you could just draw some lines on them. Just make some changes that will be noticeable and then save the files.
4. Package it back up:
Code: $ apktool b framework-res framework-res.apk
5. Sign it using the signit script:
Code: $ signit framework-res.apk
6. Create a skeleton zip file using the createzip script:
Code: $ createzip system/framework framework-res.apk
Note that the createzip script accepts 2 arguments. The first is the directory where the file needs to go, and the second is the name of the .apk file. If you wish, you can run the script without any arguments and it will prompt you for the values. In either case it will give you instructions for what to do next. Here is an example in interactive mode (values that I typed in are highlighted in blue):
Code: $ createzip Please enter the directory that your apk file will go in Example: system/framework system/framework Please enter the apk file to put into this zip Example: framework-res.apk framework-res.apk Creating appropriate directory structure Directory structure complete. A sample updater-script file has been created for you. This sample script will push a file to the /system mount point.
Next steps: 1. If necessary, modify the file /home/gamblor/Desktop/scripts/zip/META-INF/com/google/android/updater-script
2. When script is complete then zip up the directory and sign it: $ cd zip $ zip -r name.zip * $ signit name.zip
7. Make the actual zip file:
Zip up the directory in a recursive fashion using the exact instructions supplied by the script. Note that the createzip script will build a sample updater-script file for you, which says to mount /system and push the files over to it (since that's what most flashable zips do anyway). For this reason, you shouldn't actually need to modify that script at all for the purposes of this tutorial. It doesn't do anything fancy like scroll text across the screen, but it should do the trick to get the file installed. Feel free to open it up with a text editor and see what it does. It will also copy the file framework-res.zip to the appropriate location so everything is in place and we can create our actual zip:
Code: $ cd zip $ zip -r battery-icons.zip * $ signit battery-icons.zip
8. Flash it like you would any other file:
At this point you should have a file named battery-icons-signed.zip. Copy that file to your sdcard and then reboot into recovery and flash it (remember to backup first, if you haven't already). If everything goes well then you should be able to reboot and then check the battery icons for the percentage level that you modified. If everything went well then you should see your modified icons. Congratulations!
As a side note, if you're making mods for yourself and don't plan on creating a flashable zip (or maybe not just yet), you can easily just push the file in adb. This saves you from having to make a zip file, sign it, copy it to your zip card, reboot, and then flash from recovery. So you can just replace step 6 above with the following commands and stop after this:
Code: $ adb remount $ adb shell stop $ adb push framework-res.apk /system/framework $ adb shell start
Obviously since this post was supposed to demonstrate creating a zip file, I included those instructions. But pushing stuff in adb is a shortcut if you're just looking to test things out on a single phone and don't want to waste time dropping into recovery. Remember that file that I told you save away in step 1? Well, if you want to restore your battery icons so that some of them don't have weird colors/marks on them then cd into the directory where you saved the original file away, and then just run the 4 commands above. It should replace the file with the original one, thus setting the battery icons back to the way they were before you ever ran any of the commands above.