Most nbh's i find, are usually vogue-xpt-yzh.nbh.
Now, we use atools to set device to kaiser, android version to eclair/donut, resolution, and other settings.
Yet, on the settings, i still get : " Full Android on Vogue "
I know this is just to show off, but can we edit this ??
daedric said:
Most nbh's i find, are usually vogue-xpt-yzh.nbh.
Now, we use atools to set device to kaiser, android version to eclair/donut, resolution, and other settings.
Yet, on the settings, i still get : " Full Android on Vogue "
I know this is just to show off, but can we edit this ??
Click to expand...
Click to collapse
warbyte managed to change it to: HTC Kaiser on his build, ask him
albertorodast2007 said:
warbyte managed to change it to: HTC Kaiser on his build, ask him
Click to expand...
Click to collapse
Using HARET it was possible IIRC.
Now, since a-tools cannot patch that info, i really don't know...
daedric said:
Using HARET it was possible IIRC.
Now, since a-tools cannot patch that info, i really don't know...
Click to expand...
Click to collapse
but im using his build installed on NAND and it reads: HTC kaiser (u wont believe me but this was one of the main reasons i use his build )
oh oh! but it depends on the kernel u use duh! im using the kernel he attached to the build... so he has to know how to change this.. .i guess he used some kind of hex editor....
albertorodast2007 said:
but im using his build installed on NAND and it reads: HTC kaiser (u wont believe me but this was one of the main reasons i use his build )
oh oh! but it depends on the kernel u use duh! im using the kernel he attached to the build... so he has to know how to change this.. .i guess he used some kind of hex editor....
Click to expand...
Click to collapse
i really don't know... i've yet to try and open a nbh with a hex. KAISER... 6 letters, 6 bytes... VOGUE... 5 letters... 5 bytes...
Fortunately for all of us, it is not nearly as complex as you are imagining. It is actually very simply. It is in the properties of the build and it is just a string you need to modify in clear text you can use an androidupdate.tar for that. It's just a cosmetic thing that I was obsessed with and needed to change. I can provide you with an androidupdate for that if you all need me to, just PM me.
daedric said:
i really don't know... i've yet to try and open a nbh with a hex. KAISER... 6 letters, 6 bytes... VOGUE... 5 letters... 5 bytes...
Click to expand...
Click to collapse
LOL
Sent from my HTC Kaiser using XDA App
daedric said:
Most nbh's i find, are usually vogue-xpt-yzh.nbh.
Now, we use atools to set device to kaiser, android version to eclair/donut, resolution, and other settings.
Yet, on the settings, i still get : " Full Android on Vogue "
I know this is just to show off, but can we edit this ??
Click to expand...
Click to collapse
Open build.prop with text editor, find ro.product.model= and add 'HTC Kaiser' or whatever you whant
next initrd.lzma release (and also kernel) will fix it.
Related
My device has been locked. It now shows a screen with the following:
This concludes the beta test of this software release. Thank you very much for your time and effort in helping make this a great product for our customers.
To obtain a newer release or further information, please revisit the web site that you used to obtain your current beta release.
Click to expand...
Click to collapse
I couldn't do anything with my device now, and soft-reset doesn't help. Perhaps another build helps, but I like my current ROM. Any solutions to this?
----------
For those who were using PDAVIET 2G, a solution has been posted by elivne at http://forum.xda-developers.com/showthread.php?t=400388
I have tried it and it works without the time bomb. Cheers..
kwangchin said:
My device has been locked. It now shows a screen with the following:
I couldn't do anything with my device now, and soft-reset doesn't help. Perhaps another build helps, but I like my current ROM. Any solutions to this?
Click to expand...
Click to collapse
I believe you will have to flash a different ROM...
Cheers.
can you establish activesync to flash a new/different ROM?
Anyone else seeing this? Is it all ROMs builton 19949 or just a particular one?
zim2dive said:
can you establish activesync to flash a new/different ROM?
Anyone else seeing this? Is it all ROMs builton 19949 or just a particular one?
Click to expand...
Click to collapse
Set your date to 16th June and you will know~ =)
my hermes also locked 2
now flash back to 19588 version
same problems here, device lock >.<"
is there not a fix for this? registry change?
My device locked too .... my rom is pdaviet rom build 19949 and not come back until I did a ahrd reset.... going back to 19900
the same here
the same here, can some one raise this point in pdaviet web sit
the same for me, pdaviet version build
I have the same problem... I can't connect with my active sync.. how can I update or change my rom? help please...
P.S. I can't do the "Flashing with your Memory Card" as 1, I don't have another device or a reader for it and 2, I have 1.3GB of impt files in it..
kwangchin said:
My device has been locked. It now shows a screen with the following:
I couldn't do anything with my device now, and soft-reset doesn't help. Perhaps another build helps, but I like my current ROM. Any solutions to this?
Click to expand...
Click to collapse
I believe this should fix it. use a hex editor to edit shell32.exe's S000. search for 0000004AB2FFFFEB, change it to 0000004A0000A0E1.
@trashcan: how am I to do the editing? Will it work even though my unit is not connected with activesync?
to update to a new rom, even if you can't connect with activesync, press the power + left ok buttons and press reset until a 4 color screen appears. then you should be able to update to any image using RUUWrapper.exe
@destro: thanks alot. it worked
me too.. yesterday get lock..
trashcan said:
I believe this should fix it. use a hex editor to edit shell32.exe's S000. search for 0000004AB2FFFFEB, change it to 0000004A0000A0E1.
Click to expand...
Click to collapse
I found shell32.exe but I can't really edit it. Can you give a more detailed explanation on what we have to do.
Thanx
Eran
jocool said:
I found shell32.exe but I can't really edit it. Can you give a more detailed explanation on what we have to do.
Thanx
Eran
Click to expand...
Click to collapse
Quote:Originally Posted by trashcan
I believe this should fix it. use a hex editor to edit shell32.exe's S000. search for 0000004AB2FFFFEB, change it to 0000004A0000A0E1.
I found shell32.exe but I can't really edit it. Can you give a more detailed explanation on what we have to do.
Thanx
do this code will fix the timerbomb?
Same...
Same...
First thing I'm doing from now on with all new ROMs is:
Set year 2050 right after flashing!
And see.
Please read this originall thread: http://forum.xda-developers.com/showthread.php?t=627997
This is not my work! I just change some files, to be able to run this Android on VGA devices. (I testet it just with RAPH100)
Screenshots:
Coming soon
Download:
Rapidshare
If you use HTC Fuze download FUZE Startup rename it to "startup" and copy it to andboot folder.
For Updating this Android u should use an application called MJGDroidUtil in ANDBOOT folder.
Click on/Open MJGDroidUtil -> Click Menu -> Update -> check the checkboxes -> click Update
Further Development Cancelled but update tool will be working
Wifi working? and HTC Sense not to big like one the Klinux build?
Yeah WiFi works for me, and the sense is usuable
I think this is Klinux, just bootscreen says it
Well if this is Klinux build it's working out of the box for me on VGA
And we already have a thread here for Klinux builds
love it...need it...this is running nicely...just in case you are unaware, marketplace causes soft reset...i'm using this on a fuze fyi
macieh said:
love it...need it...this is running nicely...just in case you are unaware, marketplace causes soft reset...i'm using this on a fuze fyi
Click to expand...
Click to collapse
how are you geting this to work on ur fuze? I downloaded the link and extracted, copyied everything in the andboot folder onto the root of my sd.
i started up haret and i keep getting loops and loops of the Klinux:hTc boot screen.
I go no where. I loops that screen again and again. I cant go pass that. What did you do different?
macieh said:
love it...need it...this is running nicely...just in case you are unaware, marketplace causes soft reset...i'm using this on a fuze fyi
Click to expand...
Click to collapse
I have the same market place problem I have using a touch pro Raphael 100 .. no solutions for this ?
lemonspeakers said:
how are you geting this to work on ur fuze? I downloaded the link and extracted, copyied everything in the andboot folder onto the root of my sd.
i started up haret and i keep getting loops and loops of the Klinux:hTc boot screen.
I go no where. I loops that screen again and again. I cant go pass that. What did you do different?
Click to expand...
Click to collapse
I edited startup file to be able tu use this linux with fuze.
Enjoy it
FUZE Startup
Rename it to "startup" and copy it to andboot folder
// I will look at Marketplace
And what exactly is the difference with this :
http://forum.xda-developers.com/showthread.php?t=647779
and this:
http://forum.xda-developers.com/showthread.php?t=641021
I have had Android running on my raphael100 with perfect sense in vga for some time now.
Did you miss that or have you put in something extra?
I have checked. There is absolutely no difference..
Looks like someone wasn't really paying attention the last couple of weeks
The linked thread actually mentions a lot of things aren't working that are working on the other builds.
rajackar said:
And what exactly is the difference with this :
http://forum.xda-developers.com/showthread.php?t=647779
and this:
http://forum.xda-developers.com/showthread.php?t=641021
I have had Android running on my raphael100 with perfect sense in vga for some time now.
Did you miss that or have you put in something extra?
Click to expand...
Click to collapse
your vga fix, does that include the chopped off icons text as well?
AdamiX said:
I edited startup file to be able tu use this linux with fuze.
Enjoy it
FUZE Startup
Rename it to "startup" and copy it to andboot folder
Click to expand...
Click to collapse
thanks for your reply. but i still cant get this to work on my att fuze.
this is what im doing.
1) format card
2) extract downloaded file onto computer desktop
3) copy everything from the andboot file into root
4) replace the STARTUP.txt with ur startup_fuze from page1
5) put card into device
6) start up
I keep getting this loop at the boot screen of klinux:hTc
I can't go pass that!! ARGH!
The funny thing is that all these problems can be solved by reading to my thread and klinux's thread..
Indeed, I think it's better to just close this thread and not add to the confusion of the already growing number of android threads.
Ok guys
Sorry that i want to share something
Haha, good job, I am using Raphael 100 as well.
Please keep going
but my phone every time I wake it, the brightness always very low. Is there any solution? I already turn off the auto brightness.
AdamiX said:
Ok guys
Sorry that i want to share something
Click to expand...
Click to collapse
I'm not trying to bash you or anything and as always any work done to improve android on our devices is highly appreciated. Only thing going on here is that we can't really see the difference with the other packages.
Could you perhaps clarify that for us?
what is the probleme on this build
rajackar said:
I'm not trying to bash you or anything and as always any work done to improve android on our devices is highly appreciated. Only thing going on here is that we can't really see the difference with the other packages.
Could you perhaps clarify that for us?
Click to expand...
Click to collapse
Ok so use another build There is a lot of ported androids, like ROM. There is also a lot of ROMs so choose one and use it
@frank007hk brightness. I haven't got this problem. Just try to chane some settings. but if u turn off the auto brightness in WinMob, there will be something just in Android's settings
So Stop this thread. There is a lot of ports for android, u can try them
Just wondering if anyone was working on getting this ported to our phones? Works on the Desire and few others via this thread:
http://forum.xda-developers.com/showthread.php?t=772795
They also have our phone on the wiki as showing in progress.
http://psfreedom.com/wiki/index.php?title=Device_compatibility_list
It's listed even two times! They have to make up their minds about the used usb controller though *fg*.
I wonder who is actually working on it? I have watched the thread all day.. I see its listed, but no proof of anyone actually working on it. I guess it just listed because of the usb controller it uses is compatible..
Anyone know what may be different between our diamonds and the HD2? They have it running on the HD2 now
http://forum.xda-developers.com/showthread.php?t=777120
Please someone, help us !
mysticg said:
Anyone know what may be different between our diamonds and the HD2? They have it running on the HD2 now
http://forum.xda-developers.com/showthread.php?t=777120
Click to expand...
Click to collapse
I hope that the problem is only to recompile the code for the Diamond hardware...
(also on Diamond we can run haret.exe)
It´s Done
PSFreedom Diamond port is READY!!!!
http://wiki.psfreedom.com/wiki/HTC_Raphael
Thanks to developers who make it possible.
Let´s try it...
The link it' s wrong
Denial84 said:
The link it' s wrong
Click to expand...
Click to collapse
Try later... the link is correct...
Trying now. If this works, I can finally return my TI 84 calc.
After following the guide and getting android installed i get the following error trying to insert the module "insmod: can't insert 'psfreedom.ko': invalid module format".
im using the newest xdandroid i could find here on a diamond100
actually dmesg returns "psfreedom: version magic '2.6.27.46-01162-g741ab49-dirty preempt mod_unload ARMv6 ' should be '2.6.27.46-01130-g0ac6681 preempt mod_unload ARMv6'"
nevermind... apparently i missed an important step
OK
I tested on my Diamond.
It's ok for me.
Now I'm tested the fixed version with backupmanager.
I'll update soon.
NB
The first boot is very slooooooow.
I have install and run Psfreedom on my old Diamond GSM.
I dont have PS3 right now.
But it looks like working cos.... when I type "insmod psfreedom.ko" and press enter I have next line "#" no any errors and messages.
And at that moment my PC recognize "Unknow USB device". So I think that something is emulating on my Diamond.
One more thing!
When I copy file "modules-2.6.27.46-01162-g741ab49-dirty.tar" to SD
I have renamed it to "modules-2.6.27.46-01162-g741ab49.tar" and replace existed old one.
I have XDAndroid 2.2 (rel 1.6) no any updates.
forum.xda-developers.com/showthread.php?t=732362
So you can try! )))
bastardociccio said:
I tested on my Diamond.
It's ok for me.
Now I'm tested the fixed version with backupmanager.
I'll update soon.
NB
The first boot is very slooooooow.
Click to expand...
Click to collapse
the fixed version? Where??? O_O
Di1Ly said:
One more thing!
When I copy file "modules-2.6.27.46-01162-g741ab49-dirty.tar" to SD
I have renamed it to "modules-2.6.27.46-01162-g741ab49.tar" and replace existed old one.
Click to expand...
Click to collapse
I didn't do that... but PSFredoom works well
I have to rename the modules?
Denial84 said:
the fixed version? Where??? O_O
Click to expand...
Click to collapse
I modified the psfreedom.ko by myself
Is very simple with an HEX Editor.
terminal say me invalid module format when i try to load module .ko
bastardociccio said:
I didn't do that... but PSFredoom works well
I have to rename the modules?
Click to expand...
Click to collapse
Did U check it on PS3????
I dunno but installation step need to replace zImage/modules.
So I think to rename and replace it.
Di1Ly said:
Did U check it on PS3????
I dunno but installation step need to replace zImage/modules.
So I think to rename and replace it.
Click to expand...
Click to collapse
like I said it work well (with PS3 of course)
Now I'm testing the fixed version.
bastardociccio said:
like I said it work well (with PS3 of course)
Now I'm testing the fixed version.
Click to expand...
Click to collapse
right now work XD when i insert module nothing happen it's normal? :|
two problems...
why i must connect usb to pc when i start haret?
i have cryogen 6 installed it's a problem?
Will it be possible to make any true standalone Android ROM without using windows?
And for what device are this settings "RAPH800"?
Currently, no, but there is workaround - a light ROM with dualboot or directly HaRET in autorun.
Neopeek is working on it at the moment. It will come in the next few weeks. Be patient!
e334 said:
Neopeek is working on it at the moment. It will come in the next few weeks. Be patient!
Click to expand...
Click to collapse
could you please give more info or a link
In the next days i will look into dzo's script and adopt our kernel + ramadresses to get a full working nbh so that i can flash it onto my device. Hope everything goes well. This will take some serious concentration. This is what I am going to do:
Compile the kernel from scratch
Strip-out nb.os + nb.payload.os from vogue / kaiser / polaris to see what's going on
Recompile a new test-nbh to NAND-FLASH it as bootloader for Android
And last but not least: Adopt NoMoRootFS
I hope I and my device won't get stuck with this (I only have 1 device to test). If you wanna share your thoughts or contribute this then just answer to this discussion and share your ideas. I will keep you updated on this and in my free time I will also try to update the various Android builds. But I can't promise you to do so.
Click to expand...
Click to collapse
-neopeek
http://www.neopeek.com/en/community...67-Flashing+Android+on+our+devices?groupid=13 (mods please remove if this violates any rule of xda..)
Keep in mind that currently us TP user's DON'T have working camera (working on), and faster power drain (working on.) so if you end up using this rom (when it's done and released in time) you will have a phone that drain's faster then WM (meter usage is PRETTY accurate though itself.), and no camera anymore (until they finish adding support, and THEN add to this guy's kernal for the said ROM.), just so you know this
Currently, dual booting works just fine, and haven't experienced any negative's to date since using it this way. Hope that helps.
Ok. Tnx for the answers.
But can someone explain to me why it is so difficult to make working ROM for TP when the HTC Hero have the same hardware and powered up with Android? I am confused about that.
For what phone are startup settings (RAPH800)?
How much it will be faster with ROM flashed in nand memory than one run by heret in WM?
Tnx
mikx said:
Ok. Tnx for the answers.
But can someone explain to me why it is so difficult to make working ROM for TP when the HTC Hero have the same hardware and powered up with Android? I am confused about that.
For what phone are startup settings (RAPH800)?
How much it will be faster with ROM flashed in nand memory than one run by heret in WM?
Tnx
Click to expand...
Click to collapse
Uhm the Hero comes with Android 'from the factory' - it's a native Android device. Just like WinMo is native to our devices...
The brilliant devs are literally trying to reverse engineer drivers so Linux/Android can run on our WinMo phones.
I forgot to answer your other questions... NAND should give some performance boost, but I don't know how much. Probably not much, it didn't do much for the RHOD - albeit a little.
Phone startup settings, you should have a STARTUPS folder and it should have the RAPH800 startup in there...
Edit: (removed post, question was already answered)
Cant wait for nand support , i loved it on my Kaiser
Theoretical question: Will installation to NAND and starting directly from bootloader affect performance positively?
Corias said:
Theoretical question: Will installation to NAND and starting directly from bootloader affect performance positively?
Click to expand...
Click to collapse
In theory yes, but so far the benefits have been minor, if any. Of course the NAND that is functional for the TP2 isn't technically a full NAND, so it's probably not the best example to use.
arrrghhh said:
Uhm the Hero comes with Android 'from the factory' - it's a native Android device. Just like WinMo is native to our devices...
The brilliant devs are literally trying to reverse engineer drivers so Linux/Android can run on our WinMo phones.
I forgot to answer your other questions... NAND should give some performance boost, but I don't know how much. Probably not much, it didn't do much for the RHOD - albeit a little.
Phone startup settings, you should have a STARTUPS folder and it should have the RAPH800 startup in there...
Click to expand...
Click to collapse
Tnx for the answer. I know that I have RAPH800, but it can't work on my TP, only settings that work are RAPH, and I was wondering for what phone are these RAPH800 settings??
mikx said:
Tnx for the answer. I know that I have RAPH800, but it can't work on my TP, only settings that work are RAPH, and I was wondering for what phone are these RAPH800 settings??
Click to expand...
Click to collapse
I'm not sure how to answer your question. Babijoee's builds have a STARTUPS folder, do you not have this?
The process is simple. Put the tool in С:\.
Run as admin. Select one of the cab files-in the folder there should be only one.
Similarly with (http://forum.xda-developers.com/win...lds-update-links-collection-cab-t3234805),but
Result and cabs here : http://4pda.ru/forum/index.php?showtopic=770305&view=findpost&p=54847252
bikercat said:
The process is simple. Put the tool in С:\.
Run as admin. Select one of the cab files-in the folder there should be only one.
Almost the same (http://forum.xda-developers.com/win...lds-update-links-collection-cab-t3234805),but do not need to enter commands.
Tool :http://4pda.ru/forum/dl/post/9040582/App.zip
Cab for HTC One M8
http://4pda.ru/forum/dl/post/904001..._52a3d7175d13787ebcc722099a8b53a216c51804.zip
Cabs for others :
http://4pda.ru/forum/dl/post/9050650/CONT.zip
Result : http://4pda.ru/forum/index.php?showtopic=770305&view=findpost&p=54847252
Click to expand...
Click to collapse
Oh really, that's great
We all had that cab since long time.
bikercat said:
The process is simple. Put the tool in С:\.
Run as admin. Select one of the cab files-in the folder there should be only one.
Almost the same (http://forum.xda-developers.com/win...lds-update-links-collection-cab-t3234805),but do not need to enter commands.
Tool :http://4pda.ru/forum/dl/post/9040582/App.zip
Cab for HTC One M8
http://4pda.ru/forum/dl/post/904001..._52a3d7175d13787ebcc722099a8b53a216c51804.zip
Cabs for others :
http://4pda.ru/forum/dl/post/9050650/CONT.zip
Result : http://4pda.ru/forum/index.php?showtopic=770305&view=findpost&p=54847252
Click to expand...
Click to collapse
Tutorial?
I cant register to that forum. Who can post the microsoft.ms_docking.mainos.cbs_52a3d7175d13787ebcc722099a8b53a216c51804.zip ( 31,51 МБ )
here?
Nevermind, i didit.
augustinionut said:
I cant register to that forum. Who can post the microsoft.ms_docking.mainos.cbs_52a3d7175d13787ebcc722099a8b53a216c51804.zip ( 31,51 МБ )
here?
Nevermind, i didit.
Click to expand...
Click to collapse
upload it to chinese cloud server this time please
bikercat said:
The process is simple. Put the tool in С:\.
Run as admin. Select one of the cab files-in the folder there should be only one.
Almost the same (http://forum.xda-developers.com/win...lds-update-links-collection-cab-t3234805),but do not need to enter commands.
Tool :http://4pda.ru/forum/dl/post/9040582/App.zip
Cab for HTC One M8
http://4pda.ru/forum/dl/post/904001..._52a3d7175d13787ebcc722099a8b53a216c51804.zip
Cabs for others :
http://4pda.ru/forum/dl/post/9050650/CONT.zip
Result : http://4pda.ru/forum/index.php?showtopic=770305&view=findpost&p=54847252
If somebody marry an unsupported phone with the original dock - will let you know !!!
Click to expand...
Click to collapse
will that make it work on any phone (lumia 920) or it'll just make the continuum app run?
Couldn't install it on 640XL. Tried all three cabs, result is the same:
ERROR: 0x8024a110
Command failed. (HRESULT = 0x8024a110)
Can't download cabs
Lumia. Deploy one cab after other. Erase .face extension...
This site can’t be reached
The webpage at http://forum.xda-developers.com/newattachment.php?do=manageattach&p=69536527 might be temporarily down or it may have moved permanently to a new web address.
ERR_CONNECTION_ABORTED
Really xda?
karaki93 said:
will that make it work on any phone (lumia 920) or it'll just make the continuum app run?
Click to expand...
Click to collapse
try Pendrive straight away too
---------- Post added at 03:52 PM ---------- Previous post was at 03:43 PM ----------
never mind you selfish *****
http://download.windowsupdate.com/c..._00d24dcb2decb8d15ecd6dd61493208136e86586.cab
http://download.windowsupdate.com/d..._debf5ea714636f4d4fb323e0fe30c14592f26589.cab
Installing the cabs will surely not be enough for it to work, and I have to say lately all those peoples giving me middle fingers doesn't really encourage me into sharing the other missing part, but as I had really *enough* of all those peoples I'm sharing it anyway, this isn't for those peoples, but only to stop all those fools from asking me the same question again and again and then insulting me everyday.
To get Continuum to work properly after installing the packages you need to do the following:
HKLM\SOFTWARE\Microsoft\Shell\Docking
create a new dword value called EnabledForTest
set it to 1,
reboot and enjoy it running on unsupported cpu types.
lets see how to manage this http://forum.xda-developers.com/win...7-miracast-t3496988/post69539385#post69539385
EDIT: managed.
By the way, to properly install the cabs you need to make sure it matches your current build, if not get back to the correct build or use the correct cab. Otherwise it may not work or break WU with deltas.
gus33000 said:
Installing the cabs will surely not be enough for it to work, and I have to say lately all those peoples giving me middle fingers doesn't really encourage me into sharing the other missing part, but as I had really *enough* of all those peoples I'm sharing it anyway, this isn't for those peoples, but only to stop all those fools from asking me the same question again and again and then insulting me everyday.
To get Continuum to work properly after installing the packages you need to do the following:
HKLM\SOFTWARE\Microsoft\Shell\Docking
create a new dword value called EnabledForTest
set it to 1,
reboot and enjoy it running on unsupported cpu types.
Click to expand...
Click to collapse
Gus, I'm not able to add this EnabledForTest value at this key path, it just won't write. I'm using Interpol Tools 1.8 and already restored NDTKSvc. What I am doing wrong?
Use custompfd.
gus33000 said:
By the way, to properly install the cabs you need to make sure it matches your current build, if not get back to the correct build or use the correct cab. Otherwise it may not work or break WU with deltas.
Click to expand...
Click to collapse
You're absolutely right; this should written on any OP with the tweak that require old .cab deploying.
BTW, as far as I know, MS is not using "binary patching" method; all .cab contains full version of binaries and other files (provisioning etc.). I believe (I don't have enough knowledge) installer API on the phone is checking files(s) checksum.
Do you know the trick (maybe, some registry change) how to bypass that check?
SolariXxX said:
Gus, I'm not able to add this EnabledForTest value at this key path, it just won't write. I'm using Interpol Tools 1.8 and already restored NDTKSvc. What I am doing wrong?
Click to expand...
Click to collapse
Add it using the registry editor, not the browser... It fails because the browser isn't allowed to list. So use the editor. Also, try the newest versions, that version you're using is old.
djtonka said:
try Pendrive straight away too
---------- Post added at 03:52 PM ---------- Previous post was at 03:43 PM ----------
never mind you selfish *****
http://download.windowsupdate.com/c..._00d24dcb2decb8d15ecd6dd61493208136e86586.cab
http://download.windowsupdate.com/d..._debf5ea714636f4d4fb323e0fe30c14592f26589.cab
Click to expand...
Click to collapse
which one is for lumia??or should i have to install both cabs??pretty confusing because @bikercat only gave*one cab which is almost 35mb
1 - Main cab : microsoft.ms_docking.mainos.cbs_debf5ea714636f4d4fb323e0fe30c14592f26589.cab
2 - Update cab : microsoft.ms_docking.mainos.cbsu_00d24dcb2decb8d15ecd6dd61493208136e86586.cab
And those actual cabs for last build on fast ring?