Related
I am unable to flash any roms except cm6 ( I can also flash any nightlies. )
This is driving me crazy. I have tried to flash fresh 3.2 to no avail. I have also tried to install the new virus rom. I attempted to install the rooted version off the newest ota with the same results.
After each attempt the result is the same. It will just hang on the HTC evo 4g screen.
I have downloaded the roms a few times each to ensure they were completed correctly.
I have pulled the battery and waited.
I have deleted all data / dalvik / Cache several times in a row.
I have attempted to flash using a different version (earlier) of clockwork with the same results.
I even attempted to flash with RA recovery. Same results.
I am completely lost as to why I can only flash cm6 roms
Please let me know any suggestions.
Sent from my PC36100 using XDA App
From what I have read...................
You need to restore a 2.1 or a 2.2 rom you have, boot to that, then you can flash to a 2.2 rom.
You can't go from CM directly to another rom.
I am on 2.2
Sent from my PC36100 using XDA App
An HTC rom.
CM is not a typical ROM.
Restore your original backup, and try from there. If you don't have one, you may need to RUU
Bielinsk said:
An HTC rom.
CM is not a typical ROM.
Restore your original backup, and try from there. If you don't have one, you may need to RUU
Click to expand...
Click to collapse
Ok, so basically I am going to unroot - reroot?
I just flashed from cm6 straight to baked snack directly with no problems. Not really helpful but you shouldnt need to flash to a stock rooted rom first. Note sometimes you have to wait a good 5 minutes for the htc screen to go away. Probably took about 5 when I moved from cm6 to snack.
I just tried again, attempted to go to fresh. I let it sit for 10 minutes with no results.
Defpdp said:
I just tried again, attempted to go to fresh. I let it sit for 10 minutes with no results.
Click to expand...
Click to collapse
I unrooted- rerooted with the same results, I cannot flash ANY roms other than Cm6 it seems, this is very frustrating..
Anyone else have any ideas at all??
Thanks!
Try flashing a new recovery. If you're using the newest amon go back to the last one or vice versa. Or even move over to clockwork. But I would ask about that I know clockwork doesn't play well with cm6. This could get you in trouble but I guess you always go back to amon.
crimeslunk said:
Try flashing a new recovery. If you're using the newest amon go back to the last one or vice versa. Or even move over to clockwork. But I would ask about that I know clockwork doesn't play well with cm6. This could get you in trouble but I guess you always go back to amon.
Click to expand...
Click to collapse
Nothing worked, tried going to different recoveries/versions. Nothing.
Anybody? Any advice?
if you flashed cm6 and have it working... its my understandung that you cqn not just go and flash a different rom. there is a process that needs to be followed.
but i have never and never will use cm6 so i could easily be talking from my rear.
Sent from my PC36100 using XDA App
I flash from cm6 to rooted stock rom when I need to update prl and stuff.
After you flash wipe dalvik and cache again I had that problem when flashing snap.
Im not sure if these don't help. Maybe you can send a tweet to cyanogen himself to get it resolved. If fix pst your findings
Sent from my PC36100 using XDA App
Re root and see what happens
Sent from my PC36100 using XDA App
Also check your kernel, you shouldnt have to flash anything but the rom you want when switching from cm6
Some reason I tried flashing another rom but it won"t let me and keeps going back to the original rom. I had frankenstein and wanted to check out viper. I dled the viper rom and dropped it into my sd and wiped and did the usual through cwm but everytime i boot back up iot goes to frankenstein.. Any ideas? I even deleted the frank rom just to make sure but that shouldnt make a difference should it?
What version of clockwork? You will need version 3.
Sent from my SPH-D700 using XDA App
yeah that"s the one I got. It says Viper opened and completed but after reboot it reverts back to franken
oh crap you know what. I have v2.5.1. That's the one I got with that 1 click root process. Is there an updated clockwork for the epic?
same thing too
That happend to me to but from mystic mountain to frankenstein. What i ended up doing was odening to stock rerooting and then flashing. You don't even have to wipe because odining it technically wiped it lol.
seems like a lot of work just to change roms. What doesnt make sense is that randyshear from youtube that does a lot of the rom reviews and installs just changes them one after another with his epic. Is there a 3.0 cwm for epic?
There is a new clockwork version for the epic. I am on my phone so don't have the link but it is a post in the development section.
Sent from my SPH-D700 using XDA App
I just checked their is a link to cw 3 in the first post of viper rom.
Sent from my SPH-D700 using XDA App
Ive got a complete package on my ROM thread,it contains CWM3.0.0.5,and everything else you would need.
Thanks fellas!
I am using the newest amon recovery. Everytime i try to restore a nandroid i save it gives me bootloops. I normally wipe everything twice and flash caulks format all zip. Is there something im doing wrong?
Sent from my PC36100 using XDA App
i would love to have this answer also...was getting the same thing happening to me, sumtimes bootloop off a hot restart...various roms, mysn, mik, virus, miui, didnt really matter which i was coming from or going too...
have since unrooted my phone and rerooted it just to see if sumthing was off...so far so good...would still like to have answers as to why though.
amon ra 2.3
latest radios
oo3 hardware
3.70
hboot .76 eng boot
Same here i rerooted and then reooted back and i still get the same result. Wonder if i am supposed flash the rom, then restore? On my hero i never had issues.
Amon ra 2.3
004 hw
Newest everything
Myns rls5
Ziggy nwest
Sent from my PC36100 using XDA App
Is your usb plugged in while either backing up or restoring? Have you tried loading a different version of amon?
U need to flash a kernel, nandroid dont save that
Sent from my SGH-T959 using XDA App
so your are saying flash the kernal first then restore nandroid restore?
Okay I just tried what you said and I still got bootloops. And my USB is never plugged in when i do a nandroid.
Something in the backup is giving you bootloops. Try completely wiping, the flashing a new rom.
You can review the recovery log too.
Sent from my PC36100 using XDA App
DEFINITIONOFREAL said:
U need to flash a kernel, nandroid dont save that
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yes it does. Likely the issue is that a wipe is not being performed before restoring the data in the nandroid.
Sent from my PC36100 using Tapatalk
Garbage in, garbage out.
If your device was unstable when you backed it up, it will continue to be so after you restore.
Try a different Sd card. If your device continues to be unholy, revert back to a stock based rom or even RUU. If your issues persist, you likely have a hardware fault.
Basic troubleshooting 101...
Nandroids dont replace the kernel, do the nand then flash the kernel
Sent from my SGH-T959 using XDA App
i really need sum help...have posted here once before on this issue...i just flashed mik4.5 last nite...made a backup this am...flashed sum mods and made another nand backup this afternoon...needed a text message off the first nand backup so i wiped everything and started the nand restore...installed just fine and started to boot up just fine untill the boot animation stopped...then it started bootlooping...wth man...i have had my evo since it came out and been using amon ra since i started this adventure we call rooting...never have i had so many things go wrong with nand restore or backups...9 out of 10 backups i have made since 1.8 has become obsolete has not worked...please help...ty
Man I'm having bootloops all the time now ever since i updated the new combo radios and flashed myn RLS5. On sense with rls5 my phone reboots a lot kinda and with AOSP roms like MIUI my phone reboots like every 24 hours and goes on a bootloop. I can't figure out what's going on. Tried messaging some devs but they don't answer me
Did u run Calkulins Format All.zip?
Sent from my PC36100 using XDA App
LuvThyMetal said:
Man I'm having bootloops all the time now ever since i updated the new combo radios and flashed myn RLS5. On sense with rls5 my phone reboots a lot kinda and with AOSP roms like MIUI my phone reboots like every 24 hours and goes on a bootloop. I can't figure out what's going on. Tried messaging some devs but they don't answer me
Click to expand...
Click to collapse
When you switched roms, did you do a format data/calkulin's format all? doing either or should fix your bootlooping problem.
I always use caulkins format all. Still get bootloops. Wipe everything, still get bootloops. I dont know what to somwtumes except star all over from scratch.
Sent from my PC36100 using XDA App
marcusva79 said:
I always use caulkins format all. Still get bootloops. Wipe everything, still get bootloops. I dont know what to somwtumes except star all over from scratch.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Same here bro. I've tried 3 different roms this weekend thinking it was just miui causing the problem but I actually got bootloops on all of them . This is weird
Sent from my PC36100 using XDA App
"Wipe everything", is that a factory restore/reset?
Cause that's what I do (factory reset).
Then the nand restore............
marcusva79 said:
I always use caulkins format all. Still get bootloops. Wipe everything, still get bootloops. I dont know what to somwtumes except star all over from scratch.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Are you flashing kernels over that?
I recently flashed my first rom...yes im a noob. I installed some root friendly apps that say I don't have my nand unlocked. Can someone send a link my way to instruct me? I thought I did it...evo4g...running evokings black titanium
Sent from my PC36100 using XDA App
androidFIERCE said:
I recently flashed my first rom...yes im a noob. I installed some root friendly apps that say I don't have my nand unlocked. Can someone send a link my way to instruct me? I thought I did it...evo4g...running evokings black titanium
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Some more details would be spectacular, such as which apps you're trying to use that give you that error. Do any other root apps work? What method did you use to root? Do you have the 'super user' app installed on your phone? When you boot to the bootloader, does it show Ship S off or Ship S on? What method did you use to flash the rom? Did you do it manually in recovery, or did you use ROM Manager?
When I boot to recovery it shows s-on. I don't remember the exact app name but it was used to manage power and cpu usage to boost performance. I used unrevoked root method found on xda.
Sent from my PC36100 using XDA App
I flashed rom from sd manually via zip
Sent from my PC36100 using XDA App
androidFIERCE said:
I flashed rom from sd manually via zip
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Okay, you should be S off, not S on. Since you have custom recovery installed, you need to download the unrevoked forever s off tool, and flash it in recovery. Then boot back to your bootloader, and be sure that you're S off. At that point, I'd boot back to recovery, do a full wipe (data/factory reset, cache, dalvik cache, and flash calkulin's format all.zip), then reflash your rom. See if it works after that.
Much appreciated friend. To be continued.
Sent from my PC36100 using XDA App
androidFIERCE said:
Much appreciated friend. To be continued.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Not a problem. And if you are on the newest version of clockwork recovery, you may not be able to flash that Calkulin's Format all.zip. You may need to flash King's format all zip instead, which I will attatch for you. Just remember, that after you flash either of the Format all.zip's, you need to flash a new ROM before you boot up. Once you flash the Format all.zip, everything geti's wiped, and you won't be able to boot up.
So instead of calkulins use kingsmod? Now.I don't wipe again one I use kingsmod do I?
Sent from my PC36100 using XDA App
Nevermind. Flash the format all.zip then flash rom.
Sent from my PC36100 using XDA App
androidFIERCE said:
Nevermind. Flash the format all.zip then flash rom.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
That is correct. Don't try to boot after flashing format all, until you first flash a ROM. Let me know how you make out
androidFIERCE said:
So instead of calkulins use kingsmod? Now.I don't wipe again one I use kingsmod do I?
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
Correct, they both do the same thing, except king's is edify compatible, which makes it gingerbread and clockwork 3.0+ friendly.
Also...kings black titanium is my first flashed rom. I like it...but I don't want to miss out on something better. I am sure I will try other roms ...but in the meantime...any suggestions for performance and stability roms. I've seen screenshots of overclocked phones....the response of my current rom is great...but I am into full customization. Any ideas from those who know?
Sent from my PC36100 using XDA App
...sounds like you should try CM7
I recommend CM7. You just need to download and flash the latest gapps with it.
Someone wanna give the pros and cons of cm7? I have heard it plenty of times. Same type of thing right? I can flash cm7 straight from. Zip on my sd card?
Sent from my PC36100 using XDA App
When u say gapps that's foreign to me...I am still noob. Is this a cynagen rom. I see alot of screen shots with people clocking their androids way ocmver the stock 1 gig. How do they accomplish this. Sorry for all the questions.
Sent from my PC36100 using XDA App
androidFIERCE said:
When u say gapps that's foreign to me...I am still noob. Is this a cynagen rom. I see alot of screen shots with people clocking their androids way ocmver the stock 1 gig. How do they accomplish this. Sorry for all the questions.
Sent from my PC36100 using XDA App
Click to expand...
Click to collapse
http://goo-inside.me/gapps/latest/7/universal/ < gapps [google apps] you flash them in recovery after flashing a new gingerbread rom, its so that your market, gmail, ect installs and work. And CM7 offers a lot of customization, plenty of themes, ect. You can overclock your phone using setcpu or from settings > cyanogen mod settings > performance > cpu settings. The only real con is a few select apps don't have gingerbread support yet, like juice defender, I believe. And if you want to update your PRL, you have to flash a sense rom, update, flash back, but that's easy.
Okay so that zip file is the gapps for cm7 rom? Now is the cm7 fast and responsive and is it a gingerbread based rom? I've been doing this replying back and forth from my phone...havent done the research yet.
Sent from my PC36100 using XDA App
PERFECT!!!
Okay now I am S-OFF. Thanks for the help guys...also...i was peeping in on mikifroyo 4.6, if i can get another lead on flashing roms...first data/factory reset, then wipe cache, then wipe dalvik, then i can flash new rom? Or do i need to flash a format all.zip first?
im running myns warm 2.2 i love sense i've been to cm7 and back a hundred times that with netarchy's 4.3.1 kernel is nice fast pretty decent battery life too but ya gotta give it day or so to see better life and lots of mods for myns too. id rather wait for gingerbread til someone other than cm to come out with one
Just asking cause I flashed the starburst rom and it boot looped my phone. I got into the main screen once but, the task bar kept force closing and it kept boot looping... Any help would be great.
Sent from my SPH-D710 using XDA Premium App
Yes this is the Sprint Galaxy S2 Epic 4G Touch section.
Did you make a nandroid backup 1st? (If Yes, restore your backup) Did you go into "mounts and storage" and format "/system" before you wiped data/cache/dalvik cache?
Odin another rom.
Search for and download odin v1.85. Then download a .tar file. Where ever you find these items, you'll also find good instructions.
Then try flashing starburst again.
veladem said:
Just asking cause I flashed the starburst rom and it boot looped my phone. I got into the main screen once but, the task bar kept force closing and it kept boot looping... Any help would be great.
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
Yes, I did make a nand and got back to it, the starburst rom section told me to flash through cwm. But, it didn't work. I odined a tar last night, I'm fine now, but, how should I go about flashing again? Yes, I did wipe.
I'm running the oc'd zedomax or however thats spelled.
Sent from my SPH-D710 using XDA App
veladem said:
Yes, I did make a nand and got back to it, the starburst rom section told me to flash through cwm. But, it didn't work. I odined a tar last night, I'm fine now, but, how should I go about flashing again? Yes, I did wipe.
I'm running the oc'd zedomax or however thats spelled.
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Did you format /system prior to flashing Starburst? That'll cause bootloops if you failed to do so.
Yup, did that, what cwm do I need?
Sent from my SPH-D710 using XDA App
veladem said:
Yup, did that, what cwm do I need?
Click to expand...
Click to collapse
I would suggest 5.0.2.3, or 5.0.2.6 Also...make sure you format cache/dalvik/data/system at least 3X each. If that doesn't work, then try redownloading the ROM. Might've gotten a borked download.
veladem said:
Yup, did that, what cwm do I need?
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
Use this: LoStkernel or this: CWM
But I'm willing to bet that you either didn't format system in the mounts and storage menu or it didn't take when you tried. I would retry StarBurst again first, making sure to Format System Under Mounts and Storage and making sure it succeeds. Then you won't have to worry about any of the other stuff.
Yeah, CWM can be quirky
Sent from my Nexus S 4G using xda premium
12MaNy said:
I would suggest 5.0.2.3, or 5.0.2.6 Also...make sure you format cache/dalvik/data/system at least 3X each. If that doesn't work, then try redownloading the ROM. Might've gotten a borked download.
Click to expand...
Click to collapse
I wiped cache and dalvik, but I didn't format them. I also didn't even bother to wipe and it worked just fine.
It's just not working... Idk why, this is the only problem with a phone I've ever had in cwm...
Sent from my SPH-D710 using XDA App
Got it! It's pretty sick to. What roms do you guys suggest though?
For some reason I had to go back to stock? Doesn't matter, works now.
Sent from my SPH-D710 using XDA App
Just flashed starburst v 1.8 10/22 over 10/19. Went perfectly, no wiping anything. But, what should I try next. I love flashing roms...
Sent from my SPH-D710 using XDA App
veladem said:
Just flashed starburst v 1.8 10/22 over 10/19. Went perfectly, no wiping anything. But, what should I try next. I love flashing roms...
Sent from my SPH-D710 using XDA App
Click to expand...
Click to collapse
I'm running viperROM v2 and it's pretty sweet. It's a really tough choice between this and starburst.
Hm... I keep getting sms like this after a flash...
//LL:1563:1319692697855:MZC:C:gDMa4uO2LcH60QAxcWBcCA==:BPEAXC0OZLE8VPAUKXDGLY8HQDAUBR0T
Any ideas?
Sent from my SPH-D710 using XDA App
help help help please
my lil brother thought it wud b great if he tried to root my phone...i apologize if in the wrong spot ive been searching forums googling for like 6 hours with no luck. my phone is stuck in the galaxy loading logo screen the one with the yellow triangle i can not get it out using odin kies or notta please help me thanks
This is Dial A Prayer ...
veladem said:
Just asking cause I flashed the starburst rom and it boot looped my phone. I got into the main screen once but, the task bar kept force closing and it kept boot looping... Any help would be great.
Sent from my SPH-D710 using XDA Premium App
Click to expand...
Click to collapse
The place to post ANYTHING about using a Starburst ROM on Epic 4 G Touch is
http://forum.xda-developers.com/showthread.php?t=1276320