Related
[Q] Tried to install Beatmod ICS, stuck on "screensaver" usb and recovery won't work
Hi guys,
I've watched the n00b video and been googling for the last few hours as well as reading through various pages on the XDA forum. I've found a lot of problems that are kinda similar and tried various solutions but don't seem to be quite getting there.
Basically I had Virtuous Affinity as the OS and clockworkmod installed (should be the most up to date versions of both, they were put on no more than a week ago) as well. I also had a backup of current OS and so on on the SD card, as well as the original zip of the rom.
I decide I want to give ICS a go and so I downloaded the betamod ICS and then loaded it. It asked me if I wanted to do a dalvik cache wipe, a dalvik cache + data wipe and a third option I don't recall. I went with the dalvik cache wipe (at the time I was under the impression that was the correct course of action) then put it back in my pocket while ICS installed.
I get my phone out of my pocket later and it's kinda stuck on what looks like (but logically isn't, I'm guessing it was meant to be a splash screen type thing while ICS installed or some such) a screensaver which just loops endlessly. The only thing you can really do is take the battery out and turn her on again, in which case you once again end up in the endless screensaver loop.
I've tried booting to recovery using volume - and the power button and unfortunately it just boots straight into the looping screensaver again.
Getting a bit worried and feeling adventurous I tried seeing what I could do with ADB, however the computer seemed unable to recognise that any device was connected with ADB devices not listing anything.
I've read up a lot and I'm at a loss as to what to do - there's a rom on the SD card and there also should have been a backup but I just can't get it into recovery.
I do have the ability to view the SD card on another device and interact with it, so if there's a potential SD fix, that's certainly not out the window.
But yeah, I'm clueless how to proceed here and very green at the whole rom business. Can anyone advise what I might try to do from here? I don't care what state I end up going back to, or if I lose my data, I can get all that back, I just want the phone in some semblance of basic operation.
I'll be keeping an eye on the thread, if I've left out any pertinent data ask away and thanks in advance for anyone with a clue how I can fix this mess .
EDIT: Post may be better off in ICS thread above and I do apologise if so, I would move it but I seem unable to delete it.
Remove battery for 5 seconds and then try again to boot into recovery using volume -and power button.
ik222 said:
Remove battery for 5 seconds and then try again to boot into recovery using volume -and power button.
Click to expand...
Click to collapse
I have, it doesn't work. I've left the battery out for a fairly long period. Volume - + power still just brings it back to the "screensaver" loop.
Thanks for the suggestion though.
Turn the phone off completely; pull the battery out for a bit then replace it and don't touch anything. Don't try to turn it on. Plug the phone by usb to your pc (still turned off). At the command prompt in the folder containing adb.exe type "adb reboot recovery" - the phone should power on and go to recovery where you can wipe properly and reflash whatever you want.
You should be able to boot to recovery using the volume down + power button combo (hold the volume-down key, then press and hold the power button and keep both held until you get to the bootloader menu); the only thing that's wrong with your phone is that you've flashed one ROM over another without wiping it first, so the ROM can't load but this shouldn't affect your bootloader or recovery.
Worst case you can flash a RUU which will restore it to the official firmware; you'll then need to re-root and re-install a recovery image to be able to flash custom ROMs again.
Very helpful post, thanks! I'll try all that and see how I go, I'll post if I still have trouble.
Yeah I dunno why I can't boot to recovery it's weird. The volume button wasn't working, so I removed it and am pressing in the volume down portion of the volume button with a pen while holding down the power button. It's possible perhaps I'm not successfully depressing volume down, but I'm 99% sure I am and that that's not it. I am however doing it as you and other guides advise, depress volume down, hold it and then depress power and hold both for about three seconds, no joy!
Anyway, as said, I'll try what you're recommending and see how I go. Thanks!
hopscotchjunkie said:
At the command prompt in the folder containing adb.exe type "adb reboot recovery"
Click to expand...
Click to collapse
Curious what you mean by this? Cause there's no command prompt in the folder ADB is in. Do you mean in command prompt, be in the folder, i.e. c:\abd kinda thing? I tried just loading command prompt and typing abd reboot recovery, no device detected - no joy.
Ethicistabdiel said:
Curious what you mean by this? Cause there's no command prompt in the folder ADB is in. Do you mean in command prompt, be in the folder, i.e. c:\abd kinda thing? I tried just loading command prompt and typing abd reboot recovery, no device detected - no joy.
Click to expand...
Click to collapse
Yeah that was what I meant; I've got a feeling that that only works when the phone is powered off if you had USB debugging activated on the phone beforehand, so if that's not working that might be why.
c:\adb
results in error: device not found.
ADB app itself is in C:\adb\platform-tools but when I try that it goes The System cannot find the path specified. I've tried cd/adb and I can get that far but I can't get to adb/platform-tools.
EDIT:
Okay, I managed to get to c:\adb\platform-tools but adb reboot recovery is still advising error: device not found. Guessing perhaps I didn't have usb debugging enabled. Are you able to suggest another work around at all? I'm happy to flash it to whatever, I don't mind losing data, just want to get it in working order again. I don't see how I can though when I seemingly don't have access to recovery or USB...hrmm, must be some way around.
Accidental double post, sorry.
You need to try get into recovery mode, where you can do a full wipe and see if that fixes anything.
Firstly, remove your battery then re-install it, your phone should still be turned off at this stage. Press and hold the volume down button, then additionally press and hold the power butter, until something appears on the screen. If the bootloader appears, you can then boot into recovery from there.
If the above fails to work, report back with your results and hopefully something else will be suggested.
Ethicistabdiel said:
c:\adb
results in error: device not found.
ADB app itself is in C:\adb\platform-tools but when I try that it goes The System cannot find the path specified. I've tried cd/adb and I can get that far but I can't get to adb/platform-tools.
EDIT:
Okay, I managed to get to c:\adb\platform-tools but adb reboot recovery is still advising error: device not found. Guessing perhaps I didn't have usb debugging enabled. Are you able to suggest another work around at all? I'm happy to flash it to whatever, I don't mind losing data, just want to get it in working order again. I don't see how I can though when I seemingly don't have access to recovery or USB...hrmm, must be some way around.
Click to expand...
Click to collapse
Your only other option to get into recovery is the volume-down/power-on combination. Like I said, I can't think why that's not working unless it's related to your missing volume button (maybe it's not maintaining a constant pressure on the button when you're using whatever to press through the hole).
If you still can't get that to work, I would suggest finding a stock RUU and flashing that. It's an .exe file that runs from your PC and will return your ROM, bootloader and radio back to stock. Obviously that means you'll lose root and your custom recovery so you'll need to do all that again from scratch. There's a sticky in the dev section with a link to a thread with various RUUs (it's named something along the lines of "shipped & test ROMs" - I'll check that and link to it once I've dragged myself out of bed to the computer). You'll lose all your data, but if you took a backup beforehand you can restore that once you're back up and running.
//sent from my Desire HD using Tapatalk; all errors entirely intentional.
Yeah I'm starting to think perhaps the down button is just broken.
What state should the phone be for the RUU, turned off with usb plugged in or turned on? Bearing in mind, that when on, all it will do is the "screensaver". Will it work in either of those states?
Thanks, will deffo research more when I get home. Appreciate the help immensely.
http://forum.xda-developers.com/showthread.php?t=824357&page=5
Guessing you mean that as far as the ruu thread. Am downloading a stock rom atm, with shaped internet till tomorrow, meh! Will see how I go. Have a feeling phone was probably Vodafone branded at stock though, so that could make for extra fiddling but yeah, fingers crossed.
If you are able too install a stock-rom you can work from their than install 4EXT recovery
touch than you doen't need the volume buttons.
I downloaded the most recent stock rom on the link above. When I try to install it though, phone off or on, it advises a USB connection error. Is this likely to be because I originally had vodafone stock and need to make a gold card, or should it still at least be recognising it? It does advise not to run any programs on the phone or anything when while installing the update, but of course, as long as my phones turned on it's stuck on the damned screensaver loop.
http://forum.xda-developers.com/archive/index.php/t-841890.html
Gonna give that a go, fingers crossed!
D'oh, just found out my mobile was Three at stock and not Vodafone, the search continues .
Gah, I'm about tearing my hair out here, I want my damned phone back . Stuck using a $79 Huwawei Vodafone thing at the moment and it's so so so awful.
Anyway. I was under the impression that making a goldcard would mean I could RUU a non-Three stock rom on the phone. I made a goldcard following these instructions; http://www.addictivetips.com/mobile/how-to-make-gold-card-for-htc-desire-hd/
Then I turned the phone on as the RUU advises, (meaning it's scrolling through the feckin' "screensaver") and start the process and once again get a USB connection error.
What's the better process at this stage, try and take it back to Three stock? I don't see how I can at the moment, the only Three stock I can find seems to be rom, not RUU, meaning I'd need to load from the phone, which I can't due to no recovery. Or should I keep trying to get the goldcard thing to work, maybe try some different RUU's or something?
I'm open to any other suggestions as well. Had a bit more of a fiddle around with my volume down button, no matter what I do though, I can't get recovery mode. Always boots first to the white HTC screen and then starts the infernal "screensaver" loop.
Ethicistabdiel said:
Yeah I'm starting to think perhaps the down button is just broken.
What state should the phone be for the RUU, turned off with usb plugged in or turned on? Bearing in mind, that when on, all it will do is the "screensaver". Will it work in either of those states?
Thanks, will deffo research more when I get home. Appreciate the help immensely.
Click to expand...
Click to collapse
How come the volume down button be broken. When you were using Affinity Rom weren't you able to use your volume button for music. Remove SD card from phone then press "First - Volume down gently for 2 sec" & press-hold power button when it goes into bootload place your sd card back select option "REBOOT RECOVERY". I think your panicking too much just be patient nothing is wrong, i think your just hurrying it up...
The volume button didn't work before either. I had to manually adjust volume from settings. I thought it was just because of the dodgy plastic button on top, but using a pen to depress the button underneath doesn't work either.
Believe me, I've been trying to fix this for days now, every different way of depressing volume down in order to get to recovery has not worked. Short of taking the phone apart and seeing if I can see what's wrong with the button (doubtful with my level of expertise) then it ain't happening via that method.
Got a little bit hopeful with this;
http://www.htcdev.com/bootloader/ruu-downloads
But that too requires my phone to be in usb debugging mode, which of course, it isn't.
Is there anyway to force the phone into usb debugging mode using some form of hack or some such? The thing is, it is powered and everything, I can turn it on, the screen works and all that jazz and indeed the phone will charge from USB and the computer makes a noise when I plug or unplug it, the phone itself however won't do anything other than the "screensaver" ICS installation loop. I guess I'm thinking where there's life there's hope and perhaps there's some way in that state I can get it to switch debugging on, though I think I'm reaching at this point .
Ethicistabdiel said:
The volume button didn't work before either. I had to manually adjust volume from settings. I thought it was just because of the dodgy plastic button on top, but using a pen to depress the button underneath doesn't work either.
Believe me, I've been trying to fix this for days now, every different way of depressing volume down in order to get to recovery has not worked. Short of taking the phone apart and seeing if I can see what's wrong with the button (doubtful with my level of expertise) then it ain't happening via that method.
Got a little bit hopeful with this;
http://www.htcdev.com/bootloader/ruu-downloads
But that too requires my phone to be in usb debugging mode, which of course, it isn't.
Is there anyway to force the phone into usb debugging mode using some form of hack or some such? The thing is, it is powered and everything, I can turn it on, the screen works and all that jazz and indeed the phone will charge from USB and the computer makes a noise when I plug or unplug it, the phone itself however won't do anything other than the "screensaver" ICS installation loop. I guess I'm thinking where there's life there's hope and perhaps there's some way in that state I can get it to switch debugging on, though I think I'm reaching at this point .
Click to expand...
Click to collapse
The only option i can think of is "Fix your volume button from your nearest Service centre". Without that you cant do anything. I am Sorry....
Searched many places for my problem but cannot find it specifically and this forum seems to be more clued up than most so here goes.
One x screen started to occasionally freeze on unlock screen (volume buttons worked also the volume pop up came on so screen itself not frozen just couldnt touch input i presume) but would fix with either a full power down or a few presses of the top button. Over the course of a day or two this has progressed to virtually always freezing and finally to where i couldnt unfreeze it even after powering down.
Did a factory reset which did give me access to my phone again but still the problem persists.
From my research it could possibly be some sort of cache problem. Also noticed after factory reset with no apps or data installed, apart from the preinstalled ones, am using 4.7 gb of internal memory with only htc sense running. this seems excessive to me but never checked it before so not sure if this is about right. If not then the cache theory could be right.
So can anyone help me please.
bump
thebarran said:
Searched many places for my problem but cannot find it specifically and this forum seems to be more clued up than most so here goes.
One x screen started to occasionally freeze on unlock screen (volume buttons worked also the volume pop up came on so screen itself not frozen just couldnt touch input i presume) but would fix with either a full power down or a few presses of the top button. Over the course of a day or two this has progressed to virtually always freezing and finally to where i couldnt unfreeze it even after powering down.
Did a factory reset which did give me access to my phone again but still the problem persists.
From my research it could possibly be some sort of cache problem. Also noticed after factory reset with no apps or data installed, apart from the preinstalled ones, am using 4.7 gb of internal memory with only htc sense running. this seems excessive to me but never checked it before so not sure if this is about right. If not then the cache theory could be right.
So can anyone help me please.
Click to expand...
Click to collapse
Did you try RUU?
Not rooted my phone so was hoping to find a fix without rooting in case i have to send it back.
thebarran said:
Not rooted my phone so was hoping to find a fix without rooting in case i have to send it back.
Click to expand...
Click to collapse
Try following this:
http://forum.xda-developers.com/showthread.php?t=1859714
No need to root / unlock bootloader
EDIT: follow option 2
following option 2 but stuck.
Make sure that USB debugging is enabled (Settings/Developer options). In order to determine which ruu file you require, boot your device into bootloader mode (Power off and then restart device by holding Power and Volume Down button together). Connect to pc via USB and check that device shows FASTBOOT USB on screen. Enter the following command in command prompt:
fastboot getvar version-main
But when i enter that in Command prompt i get fastboot is not recognised command etc using windows 8. Any help
Note: my phone is locked
thebarran said:
following option 2 but stuck.
Make sure that USB debugging is enabled (Settings/Developer options). In order to determine which ruu file you require, boot your device into bootloader mode (Power off and then restart device by holding Power and Volume Down button together). Connect to pc via USB and check that device shows FASTBOOT USB on screen. Enter the following command in command prompt:
fastboot getvar version-main
But when i enter that in Command prompt i get fastboot is not recognised command etc using windows 8. Any help
Note: my phone is locked
Click to expand...
Click to collapse
Can you try running fastboot on a different OS? Windows XP/7, Ubuntu? Something else?
EDIT: BTW, are you sure you are running the fastboot command from the fastboot folder?
davidk-il said:
EDIT: BTW, are you sure you are running the fastboot command from the fastboot folder?
Click to expand...
Click to collapse
not doing this what do you mean?
thebarran said:
not doing this what do you mean?
Click to expand...
Click to collapse
Navigate on your PC to the fastboot folder lets say "c:\fastboot".
Shift+right click on any blank place and choose open command window here(or something like that my OS is not in english now).
Try using fastboot commands .
ah nice works, thanks. stay with me in case i get stuck again.
thebarran said:
ah nice works, thanks. stay with me in case i get stuck again.
Click to expand...
Click to collapse
Sorry,
Gotta get some sleep =)
If after running RUU nothing changes take the phone to service.
more problems
Ran and installed the ruu but got an
error[152]:image update error
The ROM update utility cannot update your android phone.
Please get the correct ROM update utility and try again
But i have the correct version already 3.14.401.31 it just wont install and now my phone is stuck on a black screen with htc in centre and nothing else.
Did you run the ruu.exe as a administrator ?
Right click the ruu exe and select that.....and put the phone in the bootloader/fastboot usb mode
Mr Hofs said:
Did you run the ruu.exe as a administrator ?
Right click the ruu exe and select that.....and put the phone in the bootloader/fastboot usb mode
Click to expand...
Click to collapse
tried it in admin mode still no good and cant get to any other screen on my phone now other than the black screen with htc in the middle
thebarran said:
tried it in admin mode still no good and cant get to any other screen on my phone now other than the black screen with htc in the middle
Click to expand...
Click to collapse
Phone for sure in fastboot usb mode?
davidk-il said:
Phone for sure in fastboot usb mode?
Click to expand...
Click to collapse
it was when i first did it biut cannot check no more
Hold the power button and the volume - button together until it reboots and boots into the bootloader, hook the usb cable and you should see "fastboot usb" in red text. At that point you run the ruu with administrator rights
Mr Hofs said:
Hold the power button and the volume - button together until it reboots and boots into the bootloader, hook the usb cable and you should see "fastboot usb" in red text. At that point you run the ruu with administrator rights
Click to expand...
Click to collapse
i cannot. all that happens now is that it powers down and comes back to the black htc screen. cannot get to boot screen anymore.
thebarran said:
i cannot. all that happens now is that it powers down and comes back to the black htc screen. cannot get to boot screen anymore.
Click to expand...
Click to collapse
Try shutting of the phone, powering on when holding power button+volume down for about 8s.
You will get a hboot, choose fastboot connect usb cable and try ruu with admin permissions
finally did get to hboot screen by letting the phone shutdown itself but couldnt ruu as battery power to low so i powered down and recharged battery but back to square one where i cannot get to boot screen just constant black htc screen and cant power down again.
So ill let my battery run down again to power off completely open boot screen then stay on that til i power up enough to try ruu again.
Il let you know what happens when this is done later.
Hi guys
I've got a desire Hd, over 2 years old now so out of warranty. Not rooted, Android 2.3.5 (official ROM), Middle East ROM and relocked.
When i turn it on,After a minute or less, when it would normally show an android screen, the screen goes to bootloader. and when I wanna reboot it or enter to the recovery , the screen goes blank but the phone is still on, and the screen is still on but in a very dark grey. if you hold it on an angle the backlight appears to be on. But from that point nothing happens, the buttons no longer respond, and I have to remove the battery to turn it off.
Although I've tried to reset factory my phone but it didn't work and the screen goes blank again when the backlight is still on.
Thanks for your help.
PLease help me asap.
did u ever experience this problem?
What did you do to get it in this state?
bananagranola said:
What did you do to get it in this state?
Click to expand...
Click to collapse
nothing much. I've just removed the battery many times, because the Volume down didn't respond and I wanted to enter to the bootloader!!
any solution?!! :crying:
try this:
What happens after putting battery back whitout pressing the ON-Button?
If it's still off, try pressing once ON-Button AFTER holding Volume-UP till HBOOT comes... maybe your phone need that
OR:
Connect the phone (when its off) to PC. Then turn phone on. Flash the boot.img over PC with fastboot.exe (only boot.img, not hole ROM). I had the same troubles with every ROM i tried, i had to flash it manually.
ammo12 said:
try this:
What happens after putting battery back whitout pressing the ON-Button?
If it's still off, try pressing once ON-Button AFTER holding Volume-UP till HBOOT comes... maybe your phone need that
OR:
Connect the phone (when its off) to PC. Then turn phone on. Flash the boot.img over PC with fastboot.exe (only boot.img, not hole ROM). I had the same troubles with every ROM i tried, i had to flash it manually.
Click to expand...
Click to collapse
Does it needs any RUU to do this or the boot.img is already exist in my phone?! (my phone is S-ON and relocked)
and what's the exact command to flash boot.img not the whole ROM?
Transporter2009 said:
Does it needs any RUU to do this or the boot.img is already exist in my phone?! (my phone is S-ON and relocked)
and what's the exact command to flash boot.img not the whole ROM?
Click to expand...
Click to collapse
Once you're in the bootloader, and assuming your computer has the correct drivers and img files, type in CMD:
"fastboot flash boot boot.img"
I think I'm in a worse condition than you. My phone won't even boot into bootloader, have tried all the hardware keys (Vol+-, Home, Back, Menu) with Power button. I have even tried taking the volume cable out and pressing the buttons directly but my phone still goes into the boot animation and then blank screen with backlight on. My computer is also not recognizing the phone so adb doesn't work. I'm out of ideas, anyone got any?
cherhunghow said:
Once you're in the bootloader, and assuming your computer has the correct drivers and img files, type in CMD:
"fastboot flash boot boot.img"
I think I'm in a worse condition than you. My phone won't even boot into bootloader, have tried all the hardware keys (Vol+-, Home, Back, Menu) with Power button. I have even tried taking the volume cable out and pressing the buttons directly but my phone still goes into the boot animation and then blank screen with backlight on. My computer is also not recognizing the phone so adb doesn't work. I'm out of ideas, anyone got any?
Click to expand...
Click to collapse
I did it but unfortunately I faced with this Failure:
Code:
C:\Android>fastboot flash boot boot.img
sending 'boot' (2840 KB)... OKAY
writing 'boot'... INFOsignature checkin
FAILED (remote: signature verify fail)
what should I do then?? :crying:
and about your problem i think the Volume Key is the problem and it can be fix by replacing the volume key or even with a simple cleaning. don't worry
My HTC One M8 (Verizon) is seemingly bricked. My phone is rooted, S-Off, with the stock ROM. I have been trying to update to the latest OTA update by returning to stock. I had previously modified some entries in the Build.prop and Platform.xml. I knew those had to be default in order for the OTA to work. I had copied the original files and pasted them to my SD Card so that I could simply cut the modified versions, paste them to my SD Card, and cut the originals from my SD Card and put them in their corresponding system folders.
Upon a reboot something apparently went horribly wrong because all my phone does now is boot with the white screen and green HTC Logo, then the screen goes black. I have tried the typical Power Button + Volume Down but it won't enter the boot loader. The good news is that the USB port seems to still work for my windows computer recognizes a device connecting to it but it doesn't show up as an interactive device in windows explorer..if that makes sense.
Please Help!
SF-Echo18 said:
My HTC One M8 (Verizon) is seemingly bricked. My phone is rooted, S-Off, with the stock ROM. I have been trying to update to the latest OTA update by returning to stock. I had previously modified some entries in the Build.prop and Platform.xml. I knew those had to be default in order for the OTA to work. I had copied the original files and pasted them to my SD Card so that I could simply cut the modified versions, paste them to my SD Card, and cut the originals from my SD Card and put them in their corresponding system folders.
Upon a reboot something apparently went horribly wrong because all my phone does now is boot with the white screen and green HTC Logo, then the screen goes black. I have tried the typical Power Button + Volume Down but it won't enter the boot loader. The good news is that the USB port seems to still work for my windows computer recognizes a device connecting to it but it doesn't show up as an interactive device in windows explorer..if that makes sense.
Please Help!
Click to expand...
Click to collapse
When you connect it to the PC can you pick up the device with adb? If so, have you tried to run the command from adb to boot it into bootloader? adb devices ... if found, adb reboot bootloader
:fingers-crossed:
BerndM14 said:
When you connect it to the PC can you pick up the device with adb? If so, have you tried to run the command from adb to boot it into bootloader? adb devices ... if found, adb reboot bootloader
:fingers-crossed:
Click to expand...
Click to collapse
I'm not too familiar with ADB commands but I typed in "adb reboot recovery" and it said: "error: device not found" so even if my command was wrong it's still not detecting it. I also tried: "fastboot reboot bootloader" and it just says "waiting for device"
Also I feel like it's worth mentioning the phone is automatically rebooting every two minutes or so (haven't timed it exactly but it's a while). Still showing the green HTC Logo then the screen goes dim, then the screen turns off.
SF-Echo18 said:
I'm not too familiar with ADB commands but I typed in "adb reboot recovery" and it said: "error: device not found" so even if my command was wrong it's still not detecting it. I also tried: "fastboot reboot bootloader" and it just says "waiting on device for device"
Also I feel like it's worth mentioning the phone is automatically rebooting every two minutes or so (haven't timed it exactly but it's a while). Still showing the green HTC Logo then the screen goes dim, then the screen turns off.
Click to expand...
Click to collapse
Try holding volume UP + Power button, this simulates a "battery pull", just hold it in for a while it can take a while to "pull", when it's off try again booting into bootloader, volume DOWN + Power button.
BerndM14 said:
Try holding volume UP + Power button, this simulates a "battery pull", just hold it in for a while it can take a while to "pull", when it's off try again booting into bootloader, volume DOWN + Power button.
Click to expand...
Click to collapse
I held Volume Up + Power Button and it showed the white screen with the green HTC logo. I then released all buttons. Once the screen turned off I then held Volume Down + Power Button for two minutes straight and nothing happened.
Even though we haven't found a solution yet, I am appreciative of the help.
sounds like you never installed the htc drivers for your phone, hence your pc doesn't see the phone when you are doing ADB commands.
install the drivers for it, then try the ADB commands via your pc
and dont mess with the build prop or other system files unless you have a working back up and are 101% certain about what you are doing..
Just remember to change directory in command prompt to the folder where adb.exe is located.
I don't know why the device doesn't reboot into bootloader though when you hold volume down + power button, shouldn't have to hold it for 2minutes. Holding volume up + power button to simulate a "pull" should only take up to 20 seconds or so at most and pressing volume down + power will then immediately take you into bootloader mode, or at least it's supposed to.
Did you release the volume up / power combo when the screen went dead or before? Try holding it until the phone shuts off and then right away press volume down + power.
Sorry if I'm not answering right away though, busy eating, and will be here and away for the next hour or so while I get ready for work =o( once I leave for work I'll only be able to help some more after like 2 hours or so. Hopefully we can do something before then though =o)
wase4711 said:
sounds like you never installed the htc drivers for your phone, hence your pc doesn't see the phone when you are doing ADB commands.
install the drivers for it, then try the ADB commands via your pc
and dont mess with the build prop or other system files unless you have a working back up and are 101% certain about what you are doing..
Click to expand...
Click to collapse
You're right, I didn't install the drivers. I did so and ADB was able to recognize it and I was able to access the bootloader. Thank you everyone for your help. I won't be making the mistake again.
SF-Echo18 said:
You're right, I didn't install the drivers. I did so and ADB was able to recognize it and I was able to access the bootloader. Thank you everyone for your help. I won't be making the mistake again.
Click to expand...
Click to collapse
So you'll be able to fix it from here on then? I was just about to link this thread to you as well should you have gotten adb to work again, it's for the RUU for Verizon seeing as you said you're on Verizon.
But going by your response up there you might already know how to fix this issue further :good:
BerndM14 said:
So you'll be able to fix it from here on then? I was just about to link this thread to you as well should you have gotten adb to work again, it's for the RUU for Verizon seeing as you said you're on Verizon.
But going by your response up there you might already know how to fix this issue further :good:
Click to expand...
Click to collapse
Indeed I appreciate it, but I just finished installing the RUU ha. Hopefully this thread will be of use to someone in a similar circumstance in the future.
Share another method of getting into recovery mode on non-responsive blank screen
Hi,
I just want to share how I accessed recovery mode with the same build.prop issue but with S-ON (might work with S-Off too).
I found the solution from here:
http://forum.xda-developers.com/htc...ter-download-mode-t2853100/page2#post62490577
To get into recovery mode on a non-responsive blank screen, hold the power button and volume up button at the same time and then approximately after 10 seconds, switch from pressing the volume up to volume down button before the HTC logo white screen shows while still holding down the power button. After, a white boot screen will give an option to go into recovery mode.
Hello everyone, I got a problem again with my Robin, when I try to turn on the phone I do it with my charger since my power button and volume buttons are smashed, now since I cant use my power button I cant start the phone, and after a while it boots me intro TWRP, so my question is Is there a way to turn on my Robin without my power button on TWRP?
Your help is very aprecciated. :fingers-crossed:
I would think mounting it to a pc and issuing a reboot command would work. I never thought TWRP loaded automatically though.
philhachey said:
I would think mounting it to a pc and issuing a reboot command would work. I never thought TWRP loaded automatically though.
Click to expand...
Click to collapse
I already did that, and it didn't work :crying: it goes to fastboot mode, I cant choose anything and just stays in fastboot for a while then it goes back to TWRP.
Maybe your smashed buttons are getting pressed at boot simulating the fastboot and/or recovery.