Okay, so today I tried to flash a ROM with Clockworkmod which btw was my first time.. and now my phone can go into recovery mode and then when I select reset to factory setting it takes me to the Clockworkmod recovery menu. However, even if I delete all data, the phone does not boot up to the stock ROM. I have tried everything >< but to no avail..what should I do?
Related
Hi, I'm fairly new to Rooting and ROM flashing but having successfully flashed a few ROMs to my N7105 (Note II International LTE), I decided to go back to the stock firmware.
Having flashed the stock ROM for my region, my phone now does not get past the Samsung logo. It appears as though everything went ok in Odin but the phone just won't boot!!
Having done a bit of searching, I think it might be that my data/dalvik cache needs to be wiped (if I've got that wrong, be nice - I'm new to this!). Thing is, I can't find a way to wipe this cache without loading in to CWM recovery or similar. The recovery that I can currently boot in to does not allow me to wipe cache, only to go in to download mode or to reboot.
Does anyone have any ideas?
Thanks in advance.
Never mind, just discovered holding Volume Up, Home and Power boots in to the actual recovery mode from which I did a factory resst.
Told you I was a NOOB
Hi,
Using philz touch recovery I recently did a full backup of my phone. I then wanted to restore my phone to that state so I tried to do this, pressing backup and restore/ restore from sdcard1. Philz touch said the restore had completed but when I rebooted the phone I encountered a boot loop. I managed to get past the boot loop but I now have to set up my phone from scratch. It seems every time I try to restore it causes a boot loop. Would anyone know why this may be, or if I did something wrong? Thanks.
(Using s4 mini gt i9192
I am also facing this issue when i flashed back into stock using odin..then i have to go into recovery mode and wipe data and factory reset and then wipe cache partistion.
Yes. I am running a cm12 nightly.
My phone often boot loops when I reboot for an xposed module for example. It s annoying because I then have to re-setup my phone.
I had a problem recently after trying to do a "factory reset" from the android settings in CM12. Once the tablet will reboot was kept at a constant bootloop in recovery, appeared the display screen of the recovery and restarts. Do not know what to do, I tried to install a rom from Odin but it was impossible, in the end, the solution was to download the recovery stock and install it with ODIN, after entering mode download dozens of times, and many reboots after returning to stock recovery the message on the screen said "erasing" so I guess the tablet had the order to the "factory reset" but this will not be achieved from TRWP.
If someone comes to have a problem bootlop I hope you can fix it with this method, a hug to everyone.
translated with google translator.
A factory reset is simply wiping/formatting the data partition. Twrp could have done that.
Your mistake was attempting to do it from within a custom Rom. The device needs to boot to recovery to perform the reset. I'm guessing you would need cwm recovery installed to factory reset from within CM12 as I doubt it would work with stock or TWRP.
My tab was running stock 5.1.1 rooted and twrp
I flashed the cm-12.1-20160501-NIGHTLY-lt03wifi to check it out, and it was giving me issues so I booted it up in download mode and reflashed P600UEUCNI1_P600XARCNI1_HOME.tar.md5
and now its just sitting at the samsung loading screen .
I cant seem to get it into any type of recovery mode, only download mode.
anyone have any ideas on what i can try to do to get it booting again?
Ok correction i am able to boot into recovery mode.
Ok i was able to get into recovery mode finally..
I reflashed the cm12.1 zip and that is booting.. but still having issues ... it rebooted after doing the initial setup..
I would love to get back to a stock type rom...
You're gonna need to boot into recovery and wipe data & cache.
blindmanpb said:
You're gonna need to boot into recovery and wipe data & cache.
Click to expand...
Click to collapse
I was able to get it booting CM again, but i really would like to go back to the stock rom, but flashing it via odin doesnt seem to work, that when i get stuck at the sumsung screen..
now i was thinking this might be because twrp is still the recovery and not the stock. so i need to find the stock recovery to put back and try that i guess
If you're flashing stock firmware, it should replace TWRP with stock recovery.
You're also going to need to wipe data & cache almost any time you are switching ROMs (and definitely if you are switching between stock & CM).
blindmanpb said:
If you're flashing stock firmware, it should replace TWRP with stock recovery.
You're also going to need to wipe data & cache almost any time you are switching ROMs (and definitely if you are switching between stock & CM).
Click to expand...
Click to collapse
Thats what i thought too about the recovery.img
so you think i should wipe data/cache in trwp then reboot it back to download mode and flash via odin?
Hi all
Been having some issues with a Tab3 that was stuck in bootloop - it would turn on for anywhere upto 10-20 seconds then reboot, and repeat... I tried going into setting and selecting factory reset and it wouldn't allow it.
I then used Odin to flash TWRP recovery then flashed a custom ROM (can't remember which but it was completely de-bloated and had bare necessities). The bootloop continues and still not fixed.
When I boot into recovery I can select all options, re-partition, format, wipe cache/dalvik, etc... But even though I've wiped everything in recovery when I reboot the Tab everything is exactly as it was, as though I hadn't wiped it.
I've tried flashing a new recovery and stock ROM with no success... So, I'm wondering if anyone has ever had this problem and how would you recommend I go about fixing it?
Cheers
I've tried using Odin using re-partition, nand erase all, phone efs clear, PIT file, stock ROM, recovery, etc...
It's not hard-bricked as it's booting up, but for some reason it doesn't wipe or flash to stock and I can't find the solution!!
Any help is appreciated