Develop Bugs

[Q] stuck on htc screen after using rom manager

Help! I just rooted my new Desire with the unrevoked method. Then I installed Rom Manager, saved its recovery mode and backed up my ROM. Everything seemed to go well enough, but now my Desire is stuck endlessly rebooting to the HTC Screen.
I can access the Clockmod Recovery screen however. I've tried the system reboot option but that just gets me the Htc screen rebooting again and again.
I'm pretty much a newbie to this and didn't want to choose another option (wipe data/factory reset, restore saved rom) without checking it out as I don't want to brick my new Desire.
Could someone give me a step by step plan for recovering my Desire?
Many thanks,
Joe

Nice thing you have a nandroid backup. Just restore the backup. it should work.
Sent from my HTC Desire using XDA App

You have to wipe all the data and just flash a new Rom.
Sent from my HTC Desire using XDA App

stuck on htc screen after using rom manager
Thanks for this. A couple of other newbie questions. As I understand it, I wipe the data using the Recovery option, and I found the how to flash a rom instructions. If I want a stock rom (like the one that came with the Orange Desire here in the UK) where would I get that? And do you think it might work if I restored the first backup I made, or do you think that's faulty...
Thanks again,
Joe

stuck on htc screen after using rom manager
Things went from bad to worse. My battery seemed to stop charging so I wasn't able to get back to the recovery screen, and when I plugged the desire into the computer via the usb cable I simply got a flickering htc screen. I've had to send it back to Orange.
This experience has certainly made me leary of rooting and using rom manager again!
Does anybody have any explanation of what went wrong?
Joe

When the phone gets stuck in that loop when its trying to boot it wont charge, im not sure why.
The same thing happend to me using Rom manager. (maybe its a bug with the new version, or maybe we just didnt use it right)
I managed to get my phone to charge by taking out the battery and putting it back in ... so the phone was off, put it into the charger until it was fully charged and then did the recovery.

Battery affected by rom manager?
There's an addendum to this story. I replaced my Desire but had the same problem again, which seemed to be down to the battery in the end. Is it possible that the (virtually new) battery was affected by either rooting or rom manager backing up the rom? It seems very weird!
Joe

This might work for you
Remember to power down your Desire totally and charge it for about 2 hours or so (just to be safe) and continue.
WAIT, BEFORE YOU START, CREATE A GOLDCARD. IT IS VERY NECESSARY. THINGS WILL GO WRONG IF YOU DONT.
EDIT: YOU MUST BE ABLE TO BOOT GO TO THE BOOTLOADER MENU.
Firstly, download this file. http://dl.dropbox.com/u/13240777/Desire Downgrade.ZIP
Extract the files.
Run the win-down.bat file.
Follow on screen instructions.
After the process is completed, Head to the root of your SD card and check if there is a file named P99***IMG (FORGOT THE EXACT NAME BUT IT SHOULD BE SOMETHING LIKE THIS) there should be one.
Secondly, disconnect your phone and turn it off.
After that boot up your phone while pressing the volume down button and the power button.
The bootloader should be checking for files after awhile and once it found the file that is supposed to be in the root of your sd card, press the volume up button (NOT EXACTLY SURE, SHOULD BE THE ONE THAT SAYS YES AND CONTINUE)
It should be writing files to your phone. and replaces everything. E.G: HBOOT, RECOVERY,RADIO and such.
It should be writing files successfully and then it would ask you to reboot. Continue with the reboot and you should be having your Desire back to stock. Perfect.
PLEASE KEEP IN MIND THAT THERE ARE RISKS INVOLVED LIKE FAILURE OF WRITING TO THE HBOOT. PLEASE REMEMBER TO FOLLOW INSTRUCTIONS. MAINLY, DO NOT BLAME ME FOR ANYTHING THAT GOES WRONG.
FINALLY, YOU SHOULD BE READING EVERYTHING UP TO HERE AND THAT YOU MUST HAVE A GOLDCARD (A GOLD SD CARD)
Hope this helps you and please ask if you have further questions. PM me if the questions cannot be answered here. Good Luck

Ta
Thanks for the long reply. Sadly, I'm unable to test it out as I had to return my phone to Orange. I'm still rather mystified by what happened in the end (how could rooting affect a battery?) but I'll keep your reply on hand in case it happens next time I root.
Joe

[Q] Bricked my DHD, please help :(

Let me just start off by saying poop.
I've been reading up on these forums quite a lot, equipping myself with enough knowledge to get going on using this phone to its potential.
After the anticipation of getting my DHD, I went about rooting it. I used this guide: http://forum.xda-developers.com/showthread.php?t=841076.
Everything went fine without much trouble. I completed all the steps in rooting it and gaing SU access. Also installed the Clockwork Recovery mod without a hiccup. I went on to install the Android Revolution ROM and going through the guide I used a tool called: 'Easy Wipe Upgrade.'
After installing this zip, the phone reboot and it just refuses to budge. Stuck on the HTC splash screen.
I've held down the bottom volume button with power and it gets me into HBOOT. I've tried a variety of option such as factory resets and nothing seems to be working.
My luck and phones. Just have a very expensive brick now sitting on my desk. Ah
I'd appreciate any help I can get please. Thanks.

I managed to resolve it!
Just FYI. Mounted the USB (Which was hidden fairly deeply) I guess you don't look when you panic? I then dropped on the ROM and installed it and boot up took a while but voila, it worked!

Well done, I would go mental if I bricked my phone. That's why I am still just reading up rather than trying things.
Sent from my Desire HD using XDA App

in the exact same situation as you where Could you go into abit more detail how you resolved this? currently have no phone cheers

whats wrong with your phone mate

Just so you know, as long as you have access to the bootloader (can be stock bootloader with S-ON, doesn't matter), 99% of the time you can 'unbrick' your phone by installing a stock RUU (PD98IMG.zip method) which returns your phone to complete stock.
If you install the wrong RUU while ENG HBOOT S-OFF then you can potentially fudge up your phone for good (unless you have Radio S-OFF, then you are fine - just install the correct RUU).
So don't worry, because there is nearly always a way to go back to how your phone was before you started hacking it.

prank1 said:
Just so you know, as long as you have access to the bootloader (can be stock bootloader with S-ON, doesn't matter), 99% of the time you can 'unbrick' your phone by installing a stock RUU (PD98IMG.zip method) which returns your phone to complete stock.
If you install the wrong RUU while ENG HBOOT S-OFF then you can potentially fudge up your phone for good (unless you have Radio S-OFF, then you are fine - just install the correct RUU).
So don't worry, because there is nearly always a way to go back to how your phone was before you started hacking it.
Click to expand...
Click to collapse
Here is a link to the pd98img.zip method if anyone wants it for reference.

thanks for the replies got it fixed as explained above cheers

DarkShadowAy said:
I managed to resolve it!
Just FYI. Mounted the USB (Which was hidden fairly deeply) I guess you don't look when you panic? I then dropped on the ROM and installed it and boot up took a while but voila, it worked!
Click to expand...
Click to collapse
My DHD is not starting up after i have applied s-off tool and the orange led light is on without pluggin in , by mounting USB can cure my problem ??
PLEASE HELP !!

dr.m0x said:
Here is a link to the pd98img.zip method if anyone wants it for reference.
Click to expand...
Click to collapse
hey guys, hope u could help me out.. i tried this RD1945's method.. got an ruu file, renamed the ruu file, then i put it on my micro sd card using a reader, then i plug it back in my phone, run hboot, the hboot parsed the zip file which i renamed according to the steps.. after it parsed it brought me back to the fastboot, recovery, restore factory defaults menu, etc... which i then chose fastboot then reboot... it reboots but im still stuck at the htc white splash screen for some time now.. what am i doin wrong? does it take long to start? sorry im a noob can someone explain to me how its done properly?

agonize said:
hey guys, hope u could help me out.. i tried this RD1945's method.. got an ruu file, renamed the ruu file, then i put it on my micro sd card using a reader, then i plug it back in my phone, run hboot, the hboot parsed the zip file which i renamed according to the steps.. after it parsed it brought me back to the fastboot, recovery, restore factory defaults menu, etc... which i then chose fastboot then reboot... it reboots but im still stuck at the htc white splash screen for some time now.. what am i doin wrong? does it take long to start? sorry im a noob can someone explain to me how its done properly?
Click to expand...
Click to collapse
You are not supposed to rename the RUU file, rather you run the RUU file and then afterwards locate the ROM.zip file located in your temp folder. This ROM.zip file is meant to be renamed PD98IMG.zip, NOT the RUU file.

ok that was stupid of me.. ok will try to give it a go..

sorry if this sounds stupid to you again.. but, i just wana be sure.. its my first smartphone..
anyway, i run the ruu file on my pc, yeah? so then when i run it, it asks me to connect my dhd using the usb cable.. so i did... but it couldnt detect my phone.. thus, it couldnt continue it's setup.. ;-( thank you for helping out..

Make sure you install HTC Sync, it should also install all the DHD USB drivers needed.

hey, do you have any step by step guide on doing this? im afraid il do something wrong again and just risk messing up the phone even more..
i have htc sync and the htc drivers on my laptop but when i connect the usb plug to my phone and try to run the ruu.. it still gives me the prompt of no connection from the pc and android phone.. :-| what am i doing wrong? sorry...
thanks in advance for the any help!

i managed to get to the update part.. but now it prompts a 131 error message.. :-( help?

http://forum.xda-developers.com/showthread.php?t=841890
Did u have a Look here...this shows the method and its very self explanatory

Desire HD stuck on welcome screen after 2.3 update

Hello everyone,
im in urge need of help. I somehow failed while updating to 2.3 :/
I thought that the update was done since the loading bar went to the right and stood there for a good couple of minutes. So i took the battery out. Now as i turn the phone on i only get to see the htc sign on a white background.
I tried holding the volume down key and the power button at once. I get into the recovery menu or whatever it is called. There i've chosen factory reset: i can see a update screen again. The bar doesnt move from left to right though. After 15 sec the phone resets itself and i can see the htc logo again
Recovery only shows me a phone image with a exclamation mark
I never installed anything custom on the phone. It is as i bought it from the shop. I initially had 2.2 on it.
Anyone help please

I will guess you need to put a ROM file on your SD card and select install file from sd card in recovery. If something went wrong during update you proberly dont have a Android system installed right now.
But if your on stock rom I'm not sure if that will be possibl, but hopefully somebody with more knowledge could answear that...
Good luck

If you pulled the battery while it was updating something like the radio, then you have messed it up.
I'd suggest downloading the Gingerbread RUU and trying it again. Sadly you may now lose all the data on you phone.

andyharney said:
If you pulled the battery while it was updating something like the radio, then you have messed it up.
I'd suggest downloading the Gingerbread RUU and trying it again. Sadly you may now lose all the data on you phone.
Click to expand...
Click to collapse
screw the data !
I just want my phone back
If anyone could hit me up with the details how Im supposed to bring back my desire hd to live id be forever grateful!!!

Click the link in my sig, head to RUUs and download the Gingerbread RUU. Once downloaded, plug you handset into your computer, run the RUU~.exe .
If that fails to work, with the RUU~.exe still running open a search window on your computer and search for "rom.zip", I will be in a hidden temp folder somewhere in your userdata.
Rename this rom.zip to "PD98IMG.zip" and copy to your SDcard. Now turn off your phone, and power on while holding volume down. The bootloader should see the PD98IMG.zip and flash it for you.

garman76 said:
I will guess you need to put a ROM file on your SD card and select install file from sd card in recovery. If something went wrong during update you proberly dont have a Android system installed right now.
But if your on stock rom I'm not sure if that will be possibl, but hopefully somebody with more knowledge could answear that...
Good luck
Click to expand...
Click to collapse
dont think that this is possible, as he never had a custom revovery à la ClockworkMod installed. So he cant choose which zip to flash.
but i think that andyharney got the solution for this

andyharney said:
Click the link in my sig, head to RUUs and download the Gingerbread RUU. Once downloaded, plug you handset into your computer, run the RUU~.exe .
If that fails to work, with the RUU~.exe still running open a search window on your computer and search for "rom.zip", I will be in a hidden temp folder somewhere in your userdata.
Rename this rom.zip to "PD98IMG.zip" and copy to your SDcard. Now turn off your phone, and power on while holding volume down. The bootloader should see the PD98IMG.zip and flash it for you.
Click to expand...
Click to collapse
Damn! I can't find the option to make a e-blowjob but rest assured that if such an option would be there, you'd be the first one to receive it
Thanks a lot! It works. I had my doubts as during the whole instalation my phone showed the htc logo on the white background several times(i thought that it got worse), but in the end i got it back runing!
So happy! Thanks 1.000.000 times and once again: THANKS!

Which method worked the RUU~.exe or the PD98IMG.zip?

[Q] HTC Desire HD problem, Phone won't start.

Hi!
I'm gonna go straight to my problem.
I have a HUGE problem with my HTC Desire HD.
A few days ago I was gonna update my phone from Androind Revolution HD 7.0.2 to ARHD 7.0.3.
In this process I accidently erased my whole SD card. I put the SD card into one of those
USB things where you put the small SD-card into and then into the computer. Anyway, I accidently marked
everything and deleted it, So now my phone won't even start. It just stops at the white screen and it says HTC.
You know the startup screen that comes up when you start the phone. And then nothing happens.
I am tired of custom ROMs etc etc, and I would like to revert my phone back to factory settings.
Only problem is I don't know which RUU to use etc etc. I have tried the Hold Volume DOWN button and power button
and then chose restore factory defaults.. But it doesn't work. Please help me what should I do?
I want to revert it to stock as it was when I got it from the store..
I live in Sweden, If that's any help.
Please help, I can't even use my phone anymore...

What you need to do is download a ROM and place it on your sd card. Then turn on your phone while holding the volume down button. You should enter the boot loader menu, choose recovery. From recovery you can flash the ROM you placed on your sd card.
I'm not sure but I think if you want to go to stock you can just use a stock ROM file instead of a custom one, but i recommend sticking with a good custom ROM.
Heres a list of stock RUUs
http://forum.xda-developers.com/showthread.php?p=19101263#post19101263

Thanks mate!
Only question now is, which one should I use?
I live in Sweden if that's any help as I wrote in my post.

deXXa- said:
Thanks mate!
Only question now is, which one should I use?
I live in Sweden if that's any help as I wrote in my post.
Click to expand...
Click to collapse
Try Europe ruu ?
Sent from my HTC Desire HD using xda premium

What version should I chose then? What about gingerbread? ace? I have no idea how these things work, Right now I'm gonna try
RUU​_Ace​_HTC​_WWE​_1.72​.405​.3_R​_Radio​_12.28e​.60.140f​_26.04.02.17_M2_release_161342_signed.exe
Would that be the proper one maybe?
Also this didn't work, I put the .exe file which I downloaded, on the SD card, and I chose recovery but then a black scree
came up with the cellphone on it and a red triangle with a exclamation mark..
Should I maybe rename the file to something? Or pack it in a zip file and rename it to update.zip or something like that?
Thanks.

deXXa- said:
What version should I chose then? What about gingerbread? ace? I have no idea how these things work, Right now I'm gonna try
RUU​_Ace​_HTC​_WWE​_1.72​.405​.3_R​_Radio​_12.28e​.60.140f​_26.04.02.17_M2_release_161342_signed.exe
Would that be the proper one maybe?
Also this didn't work, I put the .exe file which I downloaded, on the SD card, and I chose recovery but then a black scree
came up with the cellphone on it and a red triangle with a exclamation mark..
Should I maybe rename the file to something? Or pack it in a zip file and rename it to update.zip or something like that?
Thanks.
Click to expand...
Click to collapse
You don't need to use a RUU ROM. If you had ARHD installed before and like that, then use that, or anything else on the forums. You just need the install .zip on the SD card, the recovery files are already on your phone. Power the phone on while holding the volume down button to boot into bootloader, then choose recovery and install the .zip

That's the problem I chose recovery and as I wrote before, a black screen comes up with the phone on it and a triangle with a exclamation point..
Or are you saying I should zip the RUU ROM? And rename it to update.zip and then chose recovery or something like that?
I have read a little myself, and the red triangle thingy, I found a solution to that. Press Volume Up and Power Button, So I did and I chose Install update.zip from sd card.
Only problem now is that the installation aborts itself and it says "Signature verification failed" or something like that. What do I do now?
Please help, I don't know what to do

deXXa- said:
That's the problem I chose recovery and as I wrote before, a black screen comes up with the phone on it and a triangle with a exclamation point..
Or are you saying I should zip the RUU ROM? And rename it to update.zip and then chose recovery or something like that?
I have read a little myself, and the red triangle thingy, I found a solution to that. Press Volume Up and Power Button, So I did and I chose Install update.zip from sd card.
Only problem now is that the installation aborts itself and it says "Signature verification failed" or something like that. What do I do now?
Please help, I don't know what to do
Click to expand...
Click to collapse
It seems like you have overwritten your recovery.
You can try installing clockworkmod by following this guide
http://www.addictivetips.com/mobile/how-to-install-a-custom-recovery-to-an-android-phone-device/
Try the fastboot or flash_image methods.
Once recovery is installed boot in recovery by holding vol down and press the power button, then choose recovery, and then install a ROM that you have downloaded and placed on your sd card
Edit: I highly recommend using a custom ROM and the method i wrote above but if you insist on installing a stock ROM you can use one of the RUUs from the link I posted earlier, the one you mentioned earlier should be fine. The RUU is an exe file that you run from your pc. Just connect your phone and run the RUU and follow the steps, you might have to boot into the bootloader on your phone though. It won't work if you just zip it.
Another method for installing a ROM without recovery is to get a ROM which is in the PD98IMG.zip format. If you have a ROM in this format just place the zip on the root of your sd card, boot into the boot loader and it should start installing automatically, but again you should try the recovery method first.

Thanks for this post man.
Only problem is I can't access the cellphones interface to turn USB debugging on or off, which was on when the cellphone stopped working.
And what do you mean by "Another method for installing a ROM without recovery is to get a ROM which is in the PD98IMG.zip format."
Should I just rename the ARHD 6.3.2 to PD98IMG.zip and then run it? Cause I did that and nothing happens as usual.
The only thing I can access in the phone is the boot menu..
And it seems to install clockwork mod you have to have access to the interface of the phone, meaning the phone must work sort of.. Mine doesn't It doesn't even start so that I can typ in the pin code etc etc... Nothing...
I even tried to boot the phone into boot menu and then chose Fastboot and plug it in via USB and then try to install the RUU .exe file.. Which did not work either..
I have no idea what to do..
I can however access androids own "boot menu" sort of, cause when I come into the boot menu I chose reovery, then after about 20-30 sec the black background comes up with the phone on it and a red triangle with a an exclamation mark and if I press volume up and power button it brings up a menu which I can chose "install update.zip from SD card" Only problem is, it doesn't seem to work no matter which ARHD.zip file i chose...
I am clueless on what to do. Any other suggestions?
Also the PC can't seem to find the phone when I plug it into the USB because as I said when I ran that RUU .exe file while it was plugged in, it told me it couldn't find the phone so..
help..

http://www.androidrevolution.nl/downloader/download.php?file=PD98IMG.zip
Use that PD98IMG.zip !
What you should end up with is a stock Froyo DHD which you can that root, custom recovery and so on !

Download the PD98IMG.zip from Aron Fridrik's post above, place it on the root of your sd card. Boot into the bootloader by pressing vol down and the power button when the phone is off, and the ROM will start installing automatically (I think).
Then follow this guide to root and install a later ROM.
Advanced Ace Hack Kit

Ok thanks a lot!
Will try this and get back to you.
But what's the difference on Froyo, ACE etc etc? I've never really understood that.
Thanks again! Will get back to you !

Froyo is Android 2.2, ace is the codename of Desire Hd and Wwe mean world wide edition
Sent from my HTC Desire HD A9191 using xda premium

WOW! It's working now!
Thank you all so much for the help you've given me!
I did what you said, copied PD98IMG.zip to the SD card,
booted into bootloader, it started updating the zip file and when it was
done the phone was back to stock. I then used the Advanced Ace Hack Kit
and rooted the phone, once that was done I downloaded ARHD 7.0.3 and booted into clockworkmod and applied the update.zip which I renamed earlier on the SD card.
And now I am running ARHD 7.0.3 and it's working great! I'm going to save that PD98IMG.zip file for the future in case something goes wrong again!
Now there's just one small problem, When I started Youtube on the phone I got the "force close" message, so my first thought was to uninstall it and install it again and that worked. Now I get the same message (force close message = "The application Sound set (process com.htc.sdm) has stopped unexpectedly. Please try again.) when I press Personalize > Sound > Notification Sound. It doesn't do that if I chose Ringtone or Alarm or any other. Only the Notification sound..
Any ideas what this might be?
I had the same problem when I used ARHD 7.0.2 and I though it was something with the ARHD ROM and that it might had been fixed in 7.0.3 but no.
So any ideas, or should I just check the post about ARHD 7.0.3 and see the FAQ there?
Anyway, thank you all again for the help!
I really appreciate it!

deXXa- said:
WOW! It's working now!
Thank you all so much for the help you've given me!
I did what you said, copied PD98IMG.zip to the SD card,
booted into bootloader, it started updating the zip file and when it was
done the phone was back to stock. I then used the Advanced Ace Hack Kit
and rooted the phone, once that was done I downloaded ARHD 7.0.3 and booted into clockworkmod and applied the update.zip which I renamed earlier on the SD card.
And now I am running ARHD 7.0.3 and it's working great! I'm going to save that PD98IMG.zip file for the future in case something goes wrong again!
Now there's just one small problem, When I started Youtube on the phone I got the "force close" message, so my first thought was to uninstall it and install it again and that worked. Now I get the same message (force close message = "The application Sound set (process com.htc.sdm) has stopped unexpectedly. Please try again.) when I press Personalize > Sound > Notification Sound. It doesn't do that if I chose Ringtone or Alarm or any other. Only the Notification sound..
Any ideas what this might be?
I had the same problem when I used ARHD 7.0.2 and I though it was something with the ARHD ROM and that it might had been fixed in 7.0.3 but no.
So any ideas, or should I just check the post about ARHD 7.0.3 and see the FAQ there?
Anyway, thank you all again for the help!
I really appreciate it!
Click to expand...
Click to collapse
Did you full wipe and factory data reset prior to flashing new rom?
Sent from my Desire HD using Tapatalk 2 Beta-4

Actually no I didn't. After the "root process" I just installed the update.zip through clockworkmod. Should I have done a full wipe and factory data reset before this?

deXXa- said:
Actually no I didn't. After the "root process" I just installed the update.zip through clockworkmod. Should I have done a full wipe and factory data reset before this?
Click to expand...
Click to collapse
you don't need to rename the from zip to update.zip to install a rom through recovery.
You should do a full wipe and reinstall ARHD, if the problem still persists try posting in the ARHD thread.
Don't forget to move the PD98IMG.zip from the root of your SD card or it will install every time you enter the bootloader.

Allright mate, Thanks a lot!
EDIT: I did what you said Lewelynn and now it works! Thanks a lot! Now it even looks different! =)
It's the small weather clock instead of the big one and a different look on the buttons etc etc.
How come it looks different now than before when I applied the ARHD 7.0.3? Is it because I did a data wipe/factory reset through 4ext?
Also when you do a data wipe/factory reset through 4ext, during that process it asks you if you want to install something about kernel or something else?
Can't really remember what it said.. But what did that mean? I chose No on the first question, and then Yes on the other question which said (recommended) so ofc I chose that.
Is this the reason it looks different now or ?
Thanks again!
You cannot imagine how greatful I am for your help!
Thank you everyone!

deXXa- said:
Allright mate, Thanks a lot!
EDIT: I did what you said Lewelynn and now it works! Thanks a lot! Now it even looks different! =)
It's the small weather clock instead of the big one and a different look on the buttons etc etc.
How come it looks different now than before when I applied the ARHD 7.0.3? Is it because I did a data wipe/factory reset through 4ext?
Also when you do a data wipe/factory reset through 4ext, during that process it asks you if you want to install something about kernel or something else?
Can't really remember what it said.. But what did that mean? I chose No on the first question, and then Yes on the other question which said (recommended) so ofc I chose that.
Is this the reason it looks different now or ?
Thanks again!
You cannot imagine how greatful I am for your help!
Thank you everyone!
Click to expand...
Click to collapse
I'm not sure why it looks different, maybe stuff was corrupted before since you didn't wipe, or maybe you unknowingly updated from sense 3.0 to sense 3.5 when you updated ARHD.
I don't use the 4ext wipe feature so don't know what those options are. If you are concerned, an alternate way of wiping is to use the superwipe.zip which you will find on the first post in the ARHD thread. Just install the zip before you install a new rom if you want to wipe.
No problem man we all started somewhere.

Alright mate,
Well then that's it, now everything is fixed. Moderator can remove the post or whatever Or he could let it be if someone else has the same problem.
Again! Thanks for everyone's help in this post! =)

[Q] Return to stock

I am currently running a unofficial cm10 rom and I want to return to stock, unroot, and go back to s-on. Can somebody please give me a tutorial on how I can do so?

gocool767 said:
I am currently running a unofficial cm10 rom and I want to return to stock, unroot, and go back to s-on. Can somebody please give me a tutorial on how I can do so?
Click to expand...
Click to collapse
Flash froyo radio thru hboot: http://dinc.does-it.net/Radios/2.15.00.07.28/PB31IMG.zip
Flash s-on patch thru recovery: http://downloads.unrevoked.com/forever/current/unrevoked-forever-son.zip
Do a full wipe thru recovery.
Flash latest ruu thru hboot: http://dinc.does-it.net/Stock_Images/4.08.605.15/PB31IMG.zip
Thats it.

I just realized im actually s-on not s-off. How do I flash something through hboot? When i reboot into boatloader, i only see a fastboot usb option .

gocool767 said:
I just realized im actually s-on not s-off. How do I flash something through hboot? When i reboot into boatloader, i only see a fastboot usb option .
Click to expand...
Click to collapse
The ruu i posted above should still work if your s-on, as it is an official signed image. Place it on your sdcard in no folders named exactly PB31IMG.zip. Boot to hboot and wait a few secs, hboot should find the file and prompt you to press vol up to update.

I put the file in the root of my sd card but when i boot into hboot, I am not prompted with anything. I made sure that the file name is correct as well. Could there be something else I am doing wrong?

gocool767 said:
I put the file in the root of my sd card but when i boot into hboot, I am not prompted with anything. I made sure that the file name is correct as well. Could there be something else I am doing wrong?
Click to expand...
Click to collapse
Try backing up and then reformating your sdcard fat32 with a pc. Then try again with only the PB31IMG.zip om the sd.

I can’t delete apps and I can’t reset my phone
For Gizmoe first time post, thanks for your info I found it with a google search, I was trying to follow your suggestion to FiFa_JockeR, but HTC does not have my phone on their web site. Can you please try to help me reset my phone somehow?
I have a HTC Incredible (ADR6300) and I just want to start over with this phone. Verizon stores no help, HTC customer service no help. They try to do what I’ve done already, “a factory reset”. But it just does not reset! with or without the SD card. This all started with the force closes on a few apps. Then I thought I would delete allot of apps just for the heck of it, then I ran into another problem. I can delete an app(s) while the phone is on but when the phone is rebooted or turned off then on again the deleted app(s) reappears. So I can’t delete apps and I can’t reset my phone. It’s exactly the same as FiFa_JockeR (just like the pictures) only we have different phones from HTC. PS phone has never been rooted.
http://forum.xda-developers.com/showthread.php?t=1458066&page=2
Then I tried this
http://forum.xda-developers.com/showthread.php?t=2215233
I downloaded and flashed? I put it on my formatted SD card and it loaded
I was excited because things were loading in hboot the file PB31IMG.zip
“Flash latest ruu thru hboot: http://dinc.does-it.net/Stock_Images...15/PB31IMG.zip”
anyway
now it takes about 4 minutes to get past the eye portion of the bootup, then I get “sorry the application bla bla bla has stopped unexpectedly.
please try again. this happens to what must be every app on my phone.
even if I go to settings I get the same thing “sorry the application.........
I just don’t know what to do.
I think the post by cmlusco on Re: [Q] Return to stock might be what I need but I really don’t understand it. I only downloaded the last file because I thought it was all I needed.
any help would be greatly appreciated.
and cmlusco thank you for your Post
ps guess you figured out I’m a nube
sorry if I’m not posting in the right place.