Develop Bugs

2G mode and 3G mode only

I've noticed in the menu options, there is an option to keep the phone in 2G mode only. On the other hand, is there any way to keep the phone in 3G / 3.5 / 4G mode? Any software that can do this?

hkalltheway said:
I've noticed in the menu options, there is an option to keep the phone in 2G mode only. On the other hand, is there any way to keep the phone in 3G / 3.5 / 4G mode? Any software that can do this?
Click to expand...
Click to collapse
The phone will only switch to 2G if faster speeds are not available. The 2G mode option allows you to prevent the phone from switching to faster (and more battery consuming) data connections....

From the dialer, you can type in *#*#4636#*#* to bring up some "secret" settings. From there you can configure your phone to only use 3G.
Sent from my Galaxy Nexus using Tapatalk

NPuter said:
The phone will only switch to 2G if faster speeds are not available. The 2G mode option allows you to prevent the phone from switching to faster (and more battery consuming) data connections....
Click to expand...
Click to collapse
How about if I don't want 2G at all and want it to stay 3G only, even if there is no signal? I remember this option on the SGS 2..

hkalltheway said:
How about if I don't want 2G at all and want it to stay 3G only, even if there is no signal? I remember this option on the SGS 2..
Click to expand...
Click to collapse
You do what chrono just said and the hidden menu let's you force 3g only. *#*#4636#*#* on the dial pad.

RogerPodacter said:
You do what chrono just said and the hidden menu let's you force 3g only. *#*#4636#*#* on the dial pad.
Click to expand...
Click to collapse
Doesn't stick all the time for some reason. Same with atrix. And other phones.
Sent from my Galaxy Nexus using xda premium

Chrono_Tata said:
From the dialer, you can type in *#*#4636#*#* to bring up some "secret" settings. From there you can configure your phone to only use 3G.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
What setting to change? I see phone information, battery information, etc..but no settings..any help please? Thanks!

hkalltheway said:
What setting to change? I see phone information, battery information, etc..but no settings..any help please? Thanks!
Click to expand...
Click to collapse
Go into phone info. From there if you scroll down a bit you will see a text that says something like "GSM/CDMA auto". Press that and you should get a drop down menu. Change the setting to "CDMA only". That should work.
Sent from my Galaxy Nexus using Tapatalk

Chrono_Tata said:
Go into phone info. From there if you scroll down a bit you will see a text that says something like "GSM/CDMA auto". Press that and you should get a drop down menu. Change the setting to "CDMA only". That should work.
Click to expand...
Click to collapse
Not sure how that disables 2G (1xRTT). Unless I'm mistaken, both 1xRTT (2G) and EVDO (3G) run on top of CDMA.
Also, you can get to this from settings->wireless & networks->More...->Mobile Networks->Network Mode
There you can select LTE/CDMA or CDMA.
And it always sticks

Mobile Network mode GSM/CDMA confusion *#*#4636#*#*

Entering in the "secret" menu *#*#4636#*#*, i noticed that the default network mode is GSM/CDMA auto (PRL)
Aren't two completely different networks (and phone)? Or what that CDMA setting is referring?
Since my GNext is GSM and in my country there is no CDMA network operators, is that the best option regarding the battery life?
I remember that in my previous htc desire, the default network mode was WCDMA preferred (WCDMA different from CDMA), even if i was using GSM auto (PRL) which mean that if the 3g is low it will use the 2g network...and i remember there was nothing about CDMA network
So my doubt is why the Galaxy Nexus GSM doesn't have GSM auto (PRL) or WCDMA preferred as default option? is that a bug?
here a reference about the network mode http://www.google.ie/support/forum/p/android/thread?tid=6a327a95211ac789&hl=en
GSM = GPRS (2g), EDGE(2g), UMTS(3g), WCDMA(3g), HSDPA(3g) {Cell Carrier examples: AT&T and T-Mobile}
CDMA = CDMA*(2/3g) EV-DO(3g) WiMax(3/4g) {Cell Carrier examples: Verizon and Sprint}
Now that the general stuff is out of the way, here's my take on the Preferred Network types:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best.
Click to expand...
Click to collapse
In addition seems there is no way to change the network mode in that menu on my gnext, the option i choice doesn't stick

andQlimax said:
Entering in the "secret" menu *#*#4636#*#*, i noticed that the default network mode is GSM/CDMA auto (PRL)
Aren't two completely different networks (and phone)? Or what that CDMA setting is referring?
Since my GNext is GSM and in my country there is no CDMA network operators, is that the best option regarding the battery life?
I remember that in my previous htc desire, the default network mode was WCDMA preferred (WCDMA different from CDMA), even if i was using GSM auto (PRL) which mean that if the 3g is low it will use the 2g network...and i remember there was nothing about CDMA network
So my doubt is why the Galaxy Nexus GSM doesn't have GSM auto (PRL) or WCDMA preferred as default option? is that a bug?
here a reference about the network mode http://www.google.ie/support/forum/p/android/thread?tid=6a327a95211ac789&hl=en
In addition seems there is no way to change the network mode in that menu on my gnext, the option i choice doesn't stick
Click to expand...
Click to collapse
Id like to know why the options dont stick as well... Just seems stupid to me that they dont stay after you choose them.

I have also been wondering the same thing. On the Nexus One and Nexus S it would default to WCDMA prefered and if I were to force 3G on it then it would stick on a reboot. On the GN if I put it to WCDMA only or GSM only it will revert to the GSM/CDMA auto (PRL) network type. It did this on stock 4.0.2 and it's also doing it on CM9.

In that menu there is something about LTE ram dump too. Is there a little more ram the LTE guys are getting that's hidden on GSM?
Sent from my Galaxy Nexus using Tapatalk

GSM auto (PRL) won't stick but WCDMA did for me but I REALLY regret changing it. It caused my SMSC number to change to 00 and I couldn't change it back on my GNex. It took me a while to figure out that the SMSC had changed and it stopped me from sending text messages but I could still receive them. After wiping and flashing a few times I realised and I put the sim card into an old phone and changed the SMSC back and put it back in my GNex and it let me send texts again.

3bs11 said:
GSM auto (PRL) won't stick but WCDMA did for me but I REALLY regret changing it. It caused my SMSC number to change to 00 and I couldn't change it back on my GNex. It took me a while to figure out that the SMSC had changed and it stopped me from sending text messages but I could still receive them. After wiping and flashing a few times I realised and I put the sim card into an old phone and changed the SMSC back and put it back in my GNex and it let me send texts again.
Click to expand...
Click to collapse
I am going to eat my own words but iv just done the same thing, can't send SMS. I don't have an old phone to put my sim in. I'm not sure what my SMSC was to change it back. Ideas?
Sent from my Galaxy Nexus using Tapatalk

The Gingerbread Man said:
I am going to eat my own words but iv just done the same thing, can't send SMS. I don't have an old phone to put my sim in. I'm not sure what my SMSC was to change it back. Ideas?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
God it was a nightmare yesterday. I did a google search and found the number on vodafone forums for my country. What's your carrier? Even if you have the number maybe you won't be able to put it on your nexus like me but you can try. Another possible solution might be to get a new sim card but I'm not sure if that'll work. I just read it online.
Sent from my Galaxy Nexus using Tapatalk

The Gingerbread Man said:
I am going to eat my own words but iv just done the same thing, can't send SMS. I don't have an old phone to put my sim in. I'm not sure what my SMSC was to change it back. Ideas?
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
OK try +44-7973100973 for orange uk
Sent from my Galaxy Nexus using Tapatalk

Thanks shall give it a try!
Sent from my Galaxy Nexus using Tapatalk

The Gingerbread Man said:
Thanks shall give it a try!
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Good luck. Let me know if it works or not.

3bs11 said:
Good luck. Let me know if it works or not.
Click to expand...
Click to collapse
Apparently not. The annoying thing is there is thing OEM specific carrier info button which is greyed out, I bet that would sort out my settings.
Sent from my Galaxy Nexus using Tapatalk

The Gingerbread Man said:
Apparently not. The annoying thing is there is thing OEM specific carrier info button which is greyed out, I bet that would sort out my settings.
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Mine is greyed out too so maybe that doesn't change anything in this case. I guess your best bet is trying to put the sim card into another phone and set the SMSC number on that phone then plug it back into your GNex. I used an old blackberry

3bs11 said:
Mine is greyed out too so maybe that doesn't change anything in this case. I guess your best bet is trying to put the sim card into another phone and set the SMSC number on that phone then plug it back into your GNex. I used an old blackberry
Click to expand...
Click to collapse
Yeah, might be borrowing my mums Nokia at this rate lol Did you find if you tried to copy and paste numbers into the smsc area it caused a force close for 'phone'?
I did come across http://smsclist.com/downloads/default.txt which looks pretty handy to have around
Sent from my Galaxy Nexus using Tapatalk

The Gingerbread Man said:
Yeah, might be borrowing my mums Nokia at this rate lol Did you find if you tried to copy and paste numbers into the smsc area it caused a force close for 'phone'?
I did come across http://smsclist.com/downloads/default.txt which looks pretty handy to have around
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Force close for phone as in the app?

3bs11 said:
Force close for phone as in the app?
Click to expand...
Click to collapse
Yeah haha I'm sorted now anyway thanks for your help, I can finally send messages again but had to set the message centre on my mums phone lol I'm relieved!
Sent from my Galaxy Nexus using Tapatalk

The Gingerbread Man said:
Yeah haha I'm sorted now anyway thanks for your help, I can finally send messages again but had to set the message centre on my mums phone lol I'm relieved!
Sent from my Galaxy Nexus using Tapatalk
Click to expand...
Click to collapse
Glad to see it worked. I actually went back to stock and rooted again and flashed AOKP and all that just to fix this and then realised all that wasn't necessary lol. I wonder if everyone switching to WCDMA only is having this issue or just us?

3bs11 said:
Glad to see it worked. I actually went back to stock and rooted again and flashed AOKP and all that just to fix this and then realised all that wasn't necessary lol. I wonder if everyone switching to WCDMA only is having this issue or just us?
Click to expand...
Click to collapse
Gutted! Mine doesnt want to stick with WCDMA but I'm happier with my phone fully working again. I hope no one else gets this and I'm grateful for your help. I never had this particular problem before and I'm glad I know how to sort it next time if needs be
Sent from my Galaxy Nexus using Tapatalk

SMSC update
for refenrece about the above problem updating the SMSC i found this link
http://community.windmobile.ca/windmobile/topics/nexus_s_smsc_advanced_menu_options
its for the nexus s, but it works also on our galaxy nexus
so basically with our nexus (also other samsung i guess) through the advanced menu *#*#4636#*#*, u can update the SMSC only putting the encoded value like described in the link above
also the important things are the 2 buttons near the SMSC field:
- the first on the left (nearest the field) mean refresh: basically should load ur actual SMSC (sometimes don't work)
- the second on the right (far from the filed) mean update: so it change ur SMCS with the actual value on the field..so be carefully if the field is empty
(in my language the translation of those button are wrong, and both have the same label..thats why im explaining it )
anyway i suggest to don't play with the *#*#4636#*#* menu at all, unless u have problems
hope this helps some future users

I need help. Im in the US on AT&T. Im having the same problem sending sms. I can receive them but just cant send them. I think i messed up my smsc. Messing around with*#*#4636#*#*.I dont know what to do. Im running stock rom. Can somebody help me and tell what number need to put in. Im kinda lost. Gsm galaxy nexus in the use on ATT

Geng ....

At&t temoraly RAT removal

I just play with my S3 I747 and find out how to temporaly remove RAT restriction.
Click phone then punch code : *#197328640# ->Umts->Debag Screen->Phone Control->Network Lock->Rat_Free_Supporting ON
After you click this you see " Now RAT Free Supporting". Click back button and try setting radio by pressing *#2263#.
RTA will lock back after restarting.

could you explain what "RAT restriction" is and what removing it will provide?

kirkgbr said:
could you explain what "RAT restriction" is and what removing it will provide?
Click to expand...
Click to collapse
Here is a thread that talks about RAT restrictions. It appears to have to do with restricting access to certain bands, but I am swimming in waters that are deeper than my skills will allow.
http://forum.xda-developers.com/showthread.php?t=1189241

norbarb said:
I just play with my S3 I747 and find out how to temporaly remove RAT restriction.
Click phone then punch code : *#197328640# ->Units->Debag Screen->Phone Control->Network Lock->Rat_Free_Supporting ON
After you click this you see " Now RAT Free Supporting". Click back button and try setting radio by pressing *#2263#.
RTA will lock back after restarting.
Click to expand...
Click to collapse
I gonna do a run for this later today to see if it will actually work for allowing band selection and sticking.

It seemed to work for me, but it's only been a couple of minutes so far after turning off LTE. BTW, the first menu is "UMTS", not "Units".
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Any suggestions on how to make these changes permanent without rooting?

Since there is now a known code to lift restrictions until reboot, I hope some dev will figure out a way on stock based roms (both stock and mods), as well as AOSP based, to make it permanent. I have tried AOKP and CM10 in hopes the LTE and 2G toggles would work but no dice with AT&T SGS3.
Anonymously_Unknown said:
Any suggestions on how to make these changes permanent without rooting?
Click to expand...
Click to collapse
Given the issue at hand, it is most likely a deeply embedded setting that will not be available to standard user base (non rooted), henceforth root access or even on a programming level will be needed to make the necessary changes. How the changes will be made available, if it is done, will depend on what was needed to make it permanent. This raises the question of where is this restriction coded into the AT&T SGS3. Is it firmware, ROM, SIM related, Radio? Seriously doubt it is hardware itself since there are ways to get around the restriction.

larryka said:
It seemed to work for me, but it's only been a couple of minutes so far after turning off LTE. BTW, the first menu is "UMTS", not "Units".
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Yes you are corect. I make correction in OP.

Testing RAT unlock now.
norbarb said:
I just play with my S3 I747 and find out how to temporaly remove RAT restriction.
Click phone then punch code : *#197328640# ->Umts->Debag Screen->Phone Control->Network Lock->Rat_Free_Supporting ON
After you click this you see " Now RAT Free Supporting". Click back button and try setting radio by pressing *#2263#.
RTA will lock back after restarting.
Click to expand...
Click to collapse
Testing this method now. So far I am running on 2G. I will give it at least a couple of hours and will update this post accordingly.
Update: I was messing around and decided to save this USSD (the official name of these secret dialer codes) in my contacts. From dialer you can start pressing *#1 and when it appears just press it. This gives quick access should you need to change radios often. I also want to add that instead of going back into *#2263# you can also select the band from *#197328640#. If you want to change it immediately, then once you get the confirmation "Now RAT Free Supporting" press the menu key on the left of the Home button. Select back and repeat again to go back again. Then, instead of choosing Network Lock choose Network Control-->Band Selection. This takes you to the same menu that *#2263# does and you can select accordingly.
@norbarb...perhaps you can update your OP to reflect that you can stay within the original selection instead of *#2263# and just go back twice to access the band selection. It is just one more way of doing things.
I also did the test of rebooting my phone. As mentioned by norbarb, if you have rebooted the RAT restriction is back in place. Regardless of which option you take to the band selection it will show RAT restriction until you follow the OPs steps again to remove restriction. Have not found a way for permanent removal of the restriction yet (I am optimistic and really want this permanent so I will look very hard to find a solution.). Also when I rebooted I had GSM 2G only selected prior and I kept the option upon reboot so only the RAT restriction is reset...not the network band settings.
Update 2: After 4 hours I am still on 2G Edge. I am in a very good LTE location so this is definitely the most promising outlook. I have found that I despite my love for the look of AOSP roms, the inability to turn on 2G at all will keep me with TW for now. Thankfully I do not mind the look of TW and with root, I can kill the Bloatware. I will look at all of the options in the *#197328640# menus and see if there is anything that may can be applied for permanent access. I also wonder if the secret to overriding the lack of options for network choices in *#*#4636#*#* will be here as well as this would more preferable to shut down LTE only.

aybarrap1 said:
I also did the test of rebooting my phone. As mentioned by norbarb, if you have rebooted the RAT restriction is back in place. Regardless of which option you take to the band selection it will show RAT restriction until you follow the OPs steps again to remove restriction. Have not found a way for permanent removal of the restriction yet (I am optimistic and really want this permanent so I will look very hard to find a solution.). Also when I rebooted I had GSM 2G only selected prior and I kept the option upon reboot so only the RAT restriction is reset...not the network band settings.
Click to expand...
Click to collapse
Same here.
Sent from my SAMSUNG-SGH-I747 using xda premium

Isn't the problem with doing this, say if you disable LTE and only select HSPA, it wont go to any 2G networks if you are out of coverage. Because its not on 'automatic', its on HSPA. So if you are out of a service zone of HSPA, then you dont have anything to fall back to.
If only there was a way to disable LTE, and use the other networks 'automatically'.

geoldr said:
Isn't the problem with doing this, say if you disable LTE and only select HSPA, it wont go to any 2G networks if you are out of coverage. Because its not on 'automatic', its on HSPA. So if you are out of a service zone of HSPA, then you dont have anything to fall back to.
If only there was a way to disable LTE, and use the other networks 'automatically'.
Click to expand...
Click to collapse
That is the problem. However, AT&T in their infinite focus on trying to force users to their networks of choice has purposely had the ability to do network selections disabled. Under normal circumstances in android devices the option of network selection is under settings and mobile networks option. This is removed I am sure at AT&T's request. The other way to access this is to use USSD *#*#4636#*#* in dialer and select "Device Information" which will give you an option to choose a network preference. While the USSD works the option to select network preference does not work.
At least with the option to unlock RAT and using USSD *#2263#, it gives some sort of ability to choose a network. For me this is perfect since I want the 2G only due to poor 3G and LTE signals at work. However you are right that it is not convenient if you just want LTE off. For the moment there is no known way to obtain this option on the AT&T SGS3.

aybarrap1 said:
That is the problem. However, AT&T in their infinite focus on trying to force users to their networks of choice has purposely had the ability to do network selections disabled. Under normal circumstances in android devices the option of network selection is under settings and mobile networks option. This is removed I am sure at AT&T's request. The other way to access this is to use USSD *#*#4636#*#* in dialer and select "Device Information" which will give you an option to choose a network preference. While the USSD works the option to select network preference does not work.
At least with the option to unlock RAT and using USSD *#2263#, it gives some sort of ability to choose a network. For me this is perfect since I want the 2G only due to poor 3G and LTE signals at work. However you are right that it is not convenient if you just want LTE off. For the moment there is no known way to obtain this option on the AT&T SGS3.
Click to expand...
Click to collapse
Yep. I also think it's something to do with AT&T network setup. Because on AOSP ROM's we can't toggle LTE either. But the same ROM on a Canadian model phone will work just fine.
Even though the iphone has an LTE toggle. At least I read somewhere that it does.

geoldr said:
Yep. I also think it's something to do with AT&T network setup. Because on AOSP ROM's we can't toggle LTE either. But the same ROM on a Canadian model phone will work just fine.
Even though the iphone has an LTE toggle. At least I read somewhere that it does.
Click to expand...
Click to collapse
It has nothing to do with the network setup...it is the carrier forcing restrictions on their customers. I have had three other android phones (including my wifes) in the last three years. All of them were restricted from choosing the network from stock rom. The moment I uploaded a ROM such as CM or other AOSP Roms I was magically able to do a network select. I even had to Windows phones (6.1 and 6.5) and both of them were stripped but with some registry edits I was able to add the option back to select between 3G/2G and 2g only. It is AT&T's way and they are notorious for it.
On a side note, I would not be surprised if AT&T is the primary corporate network that pushed for this network SIM lock ruling by the Congressional Librarian. Of all the carriers they have the most to lose.

If you want to select multiple bands and still turn lte off..
http://forum.xda-developers.com/showthread.php?p=37334232
Galaxy S III I747

fmllc said:
If you want to select multiple bands and still turn lte off..
http://forum.xda-developers.com/showthread.php?p=37334232
Galaxy S III I747
Click to expand...
Click to collapse
I have been testing this for the last 4 hours and it does seem to work. Went to 2g only area and it switched perfectly to 2G and reverted back to 3g when I left the area. However I am not able to do GSM ONLY (2G only) using this method. You will have to follow the instructions on this thread for that.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

Click back button and try setting radio by pressing *#2263#.
norbarb said:
I just play with my S3 I747 and find out how to temporaly remove RAT restriction.
Click phone then punch code : *#197328640# ->Umts->Debag Screen->Phone Control->Network Lock->Rat_Free_Supporting ON
After you click this you see " Now RAT Free Supporting". Click back button and try setting radio by pressing *#2263#.
RTA will lock back after restarting.
Click to expand...
Click to collapse
How to set radio by pressing *#2263#?
And what is RTA will lock back after restarting?

So what is the benefit of the ability to change bands?

OKAstro said:
So what is the benefit of the ability to change bands?
Click to expand...
Click to collapse
It could result in battery savings and reduced dropped calls. For instance, I am often in and out of areas with little to no bandwidths under LTE. At default, my phone would always looking for an LTE signal which means my battery takes a pounding. By having my phone only look for 2G/3G, I do not take as large of a battery hit. Besides that, LTE does consume more power. For the most part I leave my phone with LTE off because the data speed is not crucial for me. At home I have a really fast WiFi network so it is better to be on it anyway while at home.

aybarrap1 said:
It could result in battery savings and reduced dropped calls. For instance, I am often in and out of areas with little to no bandwidths under LTE. At default, my phone would always looking for an LTE signal which means my battery takes a pounding. By having my phone only look for 2G/3G, I do not take as large of a battery hit. Besides that, LTE does consume more power. For the most part I leave my phone with LTE off because the data speed is not crucial for me. At home I have a really fast WiFi network so it is better to be on it anyway while at home.
Click to expand...
Click to collapse
OK Thanks. But under Settings/More Networks/Mobile Networks/Network Mode there are 13 "band" combination choices. Do those choices not provide what you''re looking for (i.e.2G/3G)?
I've never changed mine, so I'm curious

N7105 lte only

Is there a way or mod to enable LTE ONLY in the Mobile Network Settings? Thanks guys!

Try cdma only...
Sent from my GT-N7100 using xda app-developers app

Yes you can but if you set LTE only.
Your phone will not able to receive or dial call.
LTE only for data, not supporting voice call.

darkinners said:
Yes you can but if you set LTE only.
Your phone will not able to receive or dial call.
LTE only for data, not supporting voice call.
Click to expand...
Click to collapse
Can you teach me how to do it? Or link me to some instruction? TIA!

jerverg said:
Can you teach me how to do it? Or link me to some instruction? TIA!
Click to expand...
Click to collapse
＊＃197328640＃ >1>1>8>7>2
then you can select the band you desire to use exclusively.
Still, please beware. once you lock your phone in LTE only.
THE PHONE WILL LOST THE ABILITY TO RECEIVE OR MAKE CALLS.
*sorry for the caps

darkinners said:
＊＃197328640＃ >1>1>8>7>2
then you can select the band you desire to use exclusively.
Still, please beware. once you lock your phone in LTE only.
THE PHONE WILL LOST THE ABILITY TO RECEIVE OR MAKE CALLS.
*sorry for the caps
Click to expand...
Click to collapse
Before I do this, is there a ways to get it back to the way it used to be? Like, just typing ＊＃197328640＃ again?

Beware! I have used the trick to set preferred band LTE on a Note 2 and an S3 and while it is possible through the same trick to set back to auto, both phones lost sensitivity in 2g and 3g making them next to useless on public networks!!!
Only do this if you are prepared to dedicate the phone to packet switched, LTE only service! Fortunately I could accept that limitation, but that may not be your case...
If you are planning to do this, depending on your network, you may also have to set service mode to PS only instead of CS+PS through the menu item one down from preferred band.
Sent from my GT-N7105 using xda app-developers app

N7105 *#9090# default and LTE/4G question

Hi,
Need some assistance regarding a setting for the N7105. If someone could kindly input in their dialer *#9090# and tell me what the default settings are (please do not select anything). Then press back button to cancel.
The default settings are the ones with an asterisk in between two brackets, as seen here (*)
I accidentally selected
[1]DM/DUM over HS-USB
Click to expand...
Click to collapse
when checking out the service mode/diag config using the above dialer code.
On another matter, also in regards to the N7105. Has anyone noticed in Settings>About Device>Status, that their N7105's Mobile network type is consistently LTE:14
Reason being, is that when my phone is displaying that status, my signal bar shows only 1 bar. However, it does sometimes show full bars and the Mobile network type then displays 'UMTS:3'
I am in an area that can receive 4G signals (Sydney, Australia), but I was under the impression that my phone should be idle in UMTS:3 mode for general calls and SMS; and switching to LTE:14 when I activate mobile data and thus use 4G signal.
I am able to make calls/sms and connect to 4G with no problems, however am concerned that since it tends to be in LTE:14 mode the most that it may drain the battery more than if it were in UMTS:3
Thanks in advance.

Bump
Just dialing *#9090# won't change anything, so long as you don't touch any of the options. Simply dial it, look at the defaults, and then press back button to cancel/close page.
Thanks in advance to those who can help.

Mine is on HSDPA:9, i'm using the N7105 also.
Even if its using LTE band, as long as your not downloading data, it wont kill your battery.

Mine is
[2]DM/DUN over HSIC &
[5] DBG MSG ON
GT-N7105T Unbranded (XSA)

jomarx said:
Mine is on HSDPA:9, i'm using the N7105 also.
Even if its using LTE band, as long as your not downloading data, it wont kill your battery.
Click to expand...
Click to collapse
Thanks, hmm ok guess it should be fine then.
Android Newbe said:
Mine is
[2]DM/DUN over HSIC &
[5] DBG MSG ON
GT-N7105T Unbranded (XSA)
Click to expand...
Click to collapse
Thanks so much, really appreciate it.