Develop Bugs

problem with WIFI and Flash rom

guys i'm having trouble connect to the internet via wifi, i am using beast mod 4.2, i can connect to the router however it would not connect to the internet. i try to connect using my tablet and everything works any idea??

G1_enthusiast said:
guys i'm having trouble connect to the internet via wifi, i am using beast mod 4.2, i can connect to the router however it would not connect to the internet. i try to connect using my tablet and everything works any idea??
Click to expand...
Click to collapse
More info would be nice. Run a logcat while connecting and loading a page.

DaAwesome1 said:
More info would be nice. Run a logcat while connecting and loading a page.
Click to expand...
Click to collapse
how do i run logcat?

G1_enthusiast said:
how do i run logcat?
Click to expand...
Click to collapse
Go to the market and search logcat
Sent from my R800i using XDA App

G1_enthusiast said:
how do i run logcat?
Click to expand...
Click to collapse
Use a logcat app or download terminal emulator and type "logcat" then press enter.

ok guys i got the file save, but not sure what to look for.

Post it up.

there hope it work

Maby reinstall the software
Sent from my R800i using XDA App

noppoer2 said:
Maby reinstall the software
Sent from my R800i using XDA App
Click to expand...
Click to collapse
uh...what software??

bump any ideas?

I think he means reflash, did you do a complete wipe whenever you flashed the rom or did you flash over ?

yea always

[Guide]To UnBrick (a Soft Brick) SGS GT-I9000

Hey Users
I wanted to create this guide as I'm seeing allot of SGS users bricking there phone..This guide works for SGS GT-I9000 only..
ALSO USE THIS GUIDE IF AND ONLY IF U SEE THE FOLLOWING IMAGE WHNE BOOTING YOUR PHONE(attached image:1)
Downloads:
1. Odin3_v1.00 download here
2.The PIT file here
3.USB Drivers form here(This Is Optional if it is already installed by your phone, else you need to download it and install it)
Steps:
1.Run Odin3
2.Select "pit" and add the pit file u downloaded
3.Put ur SGS to download mode
--Do so by Pressing the 3 button combo Volume Down+Home(Center) Button+Power button
--Hold it till you see the Download screen(attached image:3)
Then go back to odin and see if your phone is connected (attached image:2)
Make sure re-partition is un-checked
Hit the Start button and wait..it'll unbrick your phone and load the previous Fimrware/Rom...
Enjoy
- - - - - - - - - - - -
Hit the Thanks Button if my thread helped...

yes,that's a soft brick.

Haha I was being stupid and repartitioned my phone and flashed the new stock rom every time that happened. Thanks man!
Sent from my GT-I9000

senotrius said:
yes,that's a soft brick.
Click to expand...
Click to collapse
+1
This will not solve anything if u cant get into download mode, and usually if your phone is bricked then u cant access download mode, so your thread should be called how to fix your phone when its soft bricked

you sir, are a gentleman and a scholar!!!! Got my dad's phone back from the black-screen-of-death.
That pit file saved my life, otherwise i would of had one angry Dad, lol.
Thank you!!

Way better than flashing Darky 10.2 RE every single time like I did. Thanks I'll try it as i get a softbrick frequently.

I hate to be that guy, but this "guide" is somewhat incomplete and misleading:
first of all the very first and important step is making sure one has installed the appropriate drivers and that the OS recognizes the phone through DL mode, otherwise Odin will suck on "setting up connection" (this is the most common cause for soft brick during flashing)!
second: if there's no re-partition, there's no need for pit neither, because that's exactly it's used for: it contains the partition table structure layout for the official firmwares.

What if i cant enter download mode even with a usb jig??
Sent from my GT-I9000 using xda app-developers app

gevamran said:
What if i cant enter download mode even with a usb jig??
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
garbage.
Sent from my GT-I9000 using xda app-developers app

gevamran said:
What if i cant enter download mode even with a usb jig??
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Then it's JTAG time! maybe it's still salvageable!
Tapatalked from TsunamICS

gevamran said:
What if i cant enter download mode even with a usb jig??
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Try http://forum.xda-developers.com/showthread.php?t=1153310
@tchindalia: your odin is really old https://dl.dropbox.com/u/16395058/Odin3 V1.85.zip

( V ) said:
Then it's JTAG time! maybe it's still salvageable!
Tapatalked from TsunamICS
Click to expand...
Click to collapse
I solved it by a strange way! I put the usb jig and just the screen showed the phone and computer with that sign then i attached phone to computer and i opened Odin and it showed "added!" I was shocked!! I installed the software while it was on that screen! And it works so great! Wish it can help anybody
Sent from my GT-I9000 using xda app-developers app

plz help
my samsung galaxy s gt i9000 had the korean software i tried to root it fro CF root. after that it wont turning on....it showd a weaired screen with various colors.. finally i managed to go to odin and upgraded to gingerbread i worked fine....
but....
phone unknown no imie ,base band unknown, wont detect sim card , no sounds and home button doset work plz any one can help me to fix this.....plz frens......(some of them say its a type of soft brick,so plz ,how can i fix it)

tchindalia said:
Hit the Start button and wait..it'll unbrick your phone and load the previous Fimrware/Rom...
Click to expand...
Click to collapse
Definitely NOT true!

[Q] help me please !!!

please read carefully ..
I have note 2 gt-n7100 when I bought it it was running android 4.1.2 after a few weeks I updated it to 4.3 but I noticed that the download mode screen changed and additional details appeared like knox an warranty void which wasn't apear before but the strange thing is that the old download mode start to appear again when I use kies but it is use less and not download any thing seems like I have 2 download modes but I can't maje any of them default or delete the other altough when I press home and power and volume down the new one always appear.. I rooted my devise using odin and there was no problem then the new update of kitkat 4.4.2 comes to france I couldn't wait then i downloaded it flashing it using odin again and rooted it with no problrm via odin and philz touch .. a few weeks i tried to connect it to odin to downgrade it to 4.3 again but it didn't appear in odin ! i thought that it could be somthing in the new software like they have stoped flash player of working so i thought that they possible avoid using odin or someting like that .. i tried using mobile odin buy chain fire and i flashed 4.3 again but the root permission was lost .. i tried again to connect it with odin but nothing changed at all i tried every possible way to use odin again installing the new drivers required and the latest version of odin and using another pc and cables altough all of them was working with no problem after 4.3 version .. tried every possible one clike root app like framaroot and etc .. tried the adb mode via my pc and it said kernel is patched I updated it to 4.4.2 again via the built in software update and nothing changed .. any way to solve that re root my mobile again !!! .. it seems like a hopeless case :'( help me please and for any additional details I will reply immediately .. thx in advance and sorry for my bad english

You can try towelroot also. Google it. If I remember correctly the site is called the same way dot com. Geohot made it.
Sent from my GT-N7100

note2nooby said:
You can try towelroot also. Google it. If I remember correctly the site is called the same way dot com. Geohot made it.
Sent from my GT-N7100
Click to expand...
Click to collapse
i tried it today but nothing changed only my mobile rebooted but still have no root access ! nothing changed unfortunately .. please help and thx for your reply

Which bootloader are you on now.?
Check with phone app info from play store.
And make sure the bootloader is the same/correct for your actual rom.
Sent from my GT-N7100

note2nooby said:
Which bootloader are you on now.?
Check with phone app info from play store.
And make sure the bootloader is the same/correct for your actual rom.
Sent from my GT-N7100
Click to expand...
Click to collapse
what do you think about that ? is there any problem with this details ??

No , everything is correct. Have to search the solution in other place.
Sent from my GT-N7100

note2nooby said:
No , everything is correct. Have to search the solution in other place.
Sent from my GT-N7100
Click to expand...
Click to collapse
other place like what ? I can't know what's the problen definiltely ! but still can't do any thing to root my mobile

omar youssef said:
other place like what ? I can't know what's the problen definiltely ! but still can't do any thing to root my mobile
Click to expand...
Click to collapse
Your Usb is debugging is ON in developer mode?
Under settings.
Sent from my GT-N7100 using XDA Premium 4 mobile app

optimusPRIME said:
Your Usb is debugging is ON in developer mode?
Under settings.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
the debugging mode is checked via the developer options in the settings but don't know if there Is any missing options shoul I do !

optimusPRIME said:
Your Usb is debugging is ON in developer mode?
Under settings.
Sent from my GT-N7100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
there is any wrong with that ??

[Q] Please help me. stuck in twrp

im stuck in twrp and cant get out. tried everything reboot system bootloader and all. battery pulled out but goes to twrp?
even when i restore my backup on phone it get after backup to TWRP.
can someone help me PLEASE. my battery is running low

Charge phone reflash stock firmware via this guide.
http://forum.xda-developers.com/showthread.php?t=2799647

Vivasanti said:
Charge phone reflash stock firmware via this guide.
http://forum.xda-developers.com/showthread.php?t=2799647
Click to expand...
Click to collapse
by flashtool i need ID and password under where i search my country?
how copy megalock to flashtool? cant open megalock

Oh boy.
You have to copy paste megalock thingy in to flashtool folder and override when asked.
That should work
Sent from my LG-D852 using XDA Free mobile app

crzygrmn said:
Oh boy.
You have to copy paste megalock thingy in to flashtool folder and override when asked.
That should work
Sent from my LG-D852 using XDA Free mobile app
Click to expand...
Click to collapse
thanks i am now with flashtool and need dll/tot files. downloading now 1.2GB kdz for that and hope its enough to get my phone to work again

afluitsnakes said:
thanks i am now with flashtool and need dll/tot files. downloading now 1.2GB kdz for that and hope its enough to get my phone to work again
Click to expand...
Click to collapse
Good luck. I f.....d up my phone many times since bump is released. But nothing that can't be fixed with factory tot. Mostly just flash and try. Mostly just no screen on cm or no sound WiFi or Bluetooth on what ever Roms I find.
Sent from my LG-D852 using XDA Free mobile app

Help, the tool says ready but when puul out usb 5seconds and in flashtool doesnt start

afluitsnakes said:
Help, the tool says ready but when puul out usb 5seconds and in flashtool doesnt start
Click to expand...
Click to collapse
Go to device manager and check if there is a "!" Somewhere on the USB ports.
Right click and disable and enable again. Sometimes the USB driver is just stuck
Sent from my LG-D852 using XDA Free mobile app

crzygrmn said:
Go to device manager and check if there is a "!" Somewhere on the USB ports.
Right click and disable and enable again. Sometimes the USB driver is just stuck
Sent from my LG-D852 using XDA Free mobile app
Click to expand...
Click to collapse
its done and says pass.
phone is on blue screen with factory reset status 3. what must i do now?

Restart the phone and click your THANKS button.

It worked downloader older drivers. I wanna thank you al this way cause i was really f..kedupp about it. Thanks people for your great help

What drivers you downloaded, flash tool won't work for me too. And what flash tool did you use? Thanks
Sent from my LG G3 using Tapatalk

I did with drivers 2.11 and lg flash tool the one from age 1 the link they put there. But sometimes the drivers wont work and you must install again

Can you put the links here please?
Sent from my LG G3 using Tapatalk

Problem solved, I was using different PC and it worked

Help Stuck

I truied to root with Odin I followed the directions to a T when I hit start I got a message unable to write or something like that. Now I am stuck at a screen saying firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. Opened Kies but Kies says my phone is not compatible with this version

eazy401 said:
I truied to root with Odin I followed the directions to a T when I hit start I got a message unable to write or something like that. Now I am stuck at a screen saying firmware upgrade encountered an issue. Please select recovery mode in Kies and try again. Opened Kies but Kies says my phone is not compatible with this version
Click to expand...
Click to collapse
Not enough information to assist.

millerboy3 said:
Not enough information to assist.
Click to expand...
Click to collapse
what other info do you need

Op. I had that happen and found it was a bad port on the pc..
Similar would be try another cable??
Another time dog ran by and pulled the cable in the middle of a flash

ibcenu said:
Op. I had that happen and found it was a bad port on the pc..
Similar would be try another cable??
Another time dog ran by and pulled the cable in the middle of a flash
Click to expand...
Click to collapse
what did you do

eazy401 said:
what did you do
Click to expand...
Click to collapse
1st i would try another usb cable..if no luck another pc

Got it working thanks guys
Sent from my SM-N910P using XDA Free mobile app

eazy401 said:
Got it working thanks guys
Sent from my SM-N910P using XDA Free mobile app
Click to expand...
Click to collapse
Just wondering what the issue was?

It may have been a bad md5 file I downloaded a different one but also changed USB cables
Sent from my SM-N910P using XDA Free mobile app