Develop Bugs

Htc desire firmware update

Just been to the HTC website and noticed a new OTA firmware update on there.
I don't have my phone yet so can anybody confirm what improvements this offers?
Cheers

great hopefully it will solve all or at least couple of issues the users had so far

Did a manual update and it said I had the latest ...

sadly HTC rarely do change logs.
Although it must be very minor as it's only going from 1.15.405.3 to 1.15.405.4

Where on the HTC Site? I cannot see it?
I wonder if this is a quick response to the rooting of the Desire?
I hope not!

I'm on 1.15.110.10 do I have to wait for T-Mobile to update the software or will it be pushed asap?

O and O said:
I'm on 1.15.110.10 do I have to wait for T-Mobile to update the software or will it be pushed asap?
Click to expand...
Click to collapse
should be pushed ASAP.
go into status and try a manual check. bear in mind that if it's done like the other devices when they get ota'd, it may be done over several days. so you may not get it till after the weekend.
Yours should go to 1.15.110.11

This 1.15.405.4 is the ROM that reviewers such as Tracy and Matt had right? I think that was the number in the video.
Just have to wait to see how long it takes T-mobile to push this out now.

Oh, and orange devices would go to 1.15.61.10 btw.

i got it via OTA earlier today but as you all know, NO INFO whatsoever! looks no different however hopefully will improve the shocking battery life......
YEAH RIGHT!

It mentions it on this page:
http://www.htc.com/europe/support.aspx
Doesn't say what's changed though...

Have not noticed any changes myself, most probably all back-end stuff.

What's all this about 405 builds for HTC and 110 builds for tmob and 60 builds for Orange?
Makes no sense.
My tmob phone notified me of an update today, but at the time I had to cancel it as I was busy. Now when I go to manually check for update it says I'm already up to date.
So where did it go?

First option on the "About" tab manual update.

Will I need to have the T-Mobile sim in for it to find the update then?

I have the 1.15.110.10 on my t-mobile and it wont manually update for me at all
Is the Desire going to be like some other tmobile phones and you cant get the official updates?
I have looked on the HTC support site and while it does say there is an update, can't it be downloaded via the site too?

XDAgeek said:
What's all this about 405 builds for HTC and 110 builds for tmob and 60 builds for Orange?
Makes no sense.
My tmob phone notified me of an update today, but at the time I had to cancel it as I was busy. Now when I go to manually check for update it says I'm already up to date.
So where did it go?
Click to expand...
Click to collapse
Build number has always been difference between generic and branded HTC devices.
I've don my update, can't see any real change though. Maybe a miner update.
Things are much smooth on my Desire then my Nexus one.

Just checked for any updates on my Desire and it said there was one available, it downloaded no problem it changed my software number to 1.15.405.4 sorry I have no idea what it was before it was changed.

Bandare said:
I have the 1.15.110.10 on my t-mobile and it wont manually update for me at all
Is the Desire going to be like some other tmobile phones and you cant get the official updates?
I have looked on the HTC support site and while it does say there is an update, can't it be downloaded via the site too?
Click to expand...
Click to collapse
you need to wait for t-mobile version of the update unless you unlock your device
roybert said:
Just checked for any updates on my Desire and it said there was one available, it downloaded no problem it changed my software number to 1.15.405.4 sorry I have no idea what it was before it was changed.
Click to expand...
Click to collapse
1.15.405.3 was before
and

cez10 said:
you need to wait for t-mobile version of the update unless you unlock your device
and
Click to expand...
Click to collapse
so if I unlock the device, HTC will automatically be able to know that and it will update with the generic update?

Firmware Chaos

Hi there!
I am a bit overwhelmed by the strange release order on samsung-firmware.com of the last "inofficial" (whatever) releases of the european i9000 firmware. Theres a JM1, a JM1 NEW, a JM2 and JM5. To make chaos complete Kies is offering me a JM1 as well, when entering test mode. What kind of JM1 would that be? The old one, the new one, or a total different one? I followed all the threats losely over the past month, but somehow lost track. A short guide is very much appreciated. Or, to put it bluntly, what F/W should I flash regarding stability, speed and gps? Or, just what the heck is the right order?
Thanks in advance,
Chicken

The JM1 New is the Version from Kies, so if you worry about warranty issues, you always should use KIES updates.
I don't know if there is a difference between JM1 and JM1 NEW.
I would recommend JM5. Stable, fast and everything works as it should.
I'd also recommend to flash the Samset rom after flashing JM5 and then the latest Lagfix. Your phone will be flying!

Well.. are you sure about that? Because I got JM2 from Kies, and it's different than the JM2 from samsung-firmwares.com...

I'm using DDJG4 and it works perfect and even better with lag fix and evo gps fix

JPJG8 is the best version I used so far! It also does not have the contact FC bug!

I bought my Galaxy S in Germany end of June
I got JF3 as Stock Fimrware
I Updated to JM1 over Kies
as i heard JM2 over Kies is only for branded SGS.
All other Fimrware Versions are from Samsung but not officially released (over Kies),
They are leaked Developer or Beta Versions.
The JM1 from Kies is diiferent to that previously leaked one from samsung-fimrwares.
So in th officially sight there is no chaos(for the firmwares).
regards
Christopher

Im on XXJF4 PDA XXJF3 Phone and TMUJE6 CSC on an unbranded and unlocked SGS and when i plug into Kies it tells me that i cant update my current version. I have tried other firmwares for samsung-firmwares and it still tells me i cant update. Does this device need to be put into a procific mode to update though Kies or is the no update for UK?

Tanis64 said:
as i heard JM2 over Kies is only for branded SGS.
Click to expand...
Click to collapse
I have an unbranded SGS though..

gravejester said:
Well.. are you sure about that? Because I got JM2 from Kies, and it's different than the JM2 from samsung-firmwares.com...
Click to expand...
Click to collapse
I understand you are Norwegian? Did you get JM2 from Kies???

Yes, I got JM2 from Kies, but with Kies in test-mode. I didn't even have to set up my APN again, it included Telenor

gravejester said:
Yes, I got JM2 from Kies, but with Kies in test-mode. I didn't even have to set up my APN again, it included Telenor
Click to expand...
Click to collapse
Great! When?
Unbranded SGS?

Unbranded SGS yes. Flashed it a couple of days ago.
BTW! This is the firmware info:
PDA: I9000XWJM2
Phone: I9000XXJM1
CSC: I9000XEEJM1

To determine the LATEST firmware look at the last three letters/numbers.
Assume they are in base 36 and then look which has a higher value.
All good?

sturmeh said:
To determine the LATEST firmware look at the last three letters/numbers.
Assume they are in base 36 and then look which has a higher value.
All good?
Click to expand...
Click to collapse
I assume you are making fun of me somehow.. I just don't get it. Care to elaborate?

gravejester said:
Unbranded SGS yes. Flashed it a couple of days ago.
BTW! This is the firmware info:
PDA: I9000XWJM2
Phone: I9000XXJM1
CSC: I9000XEEJM1
Click to expand...
Click to collapse
And only available in test mode?

Hmm.. i'm running the new JM1 from samsung-firmwares (which is a official release!)
You can see that because the CSC file states XEEJM1 instead of XXJM1

borchgrevink said:
And only available in test mode?
Click to expand...
Click to collapse
I couldn't get any update running in "normal" mode.

This makes me rage...
I also have an unbranded SGS (Bought from Komplett), and Kies won't give me an update in test mode or normal mode. I really want this new - official - firmware.
Maybe I need an older version of Kies...

The "leaked" firmwares aren't beta or test firmwares necessarily (except the Froyo firmwares) - they're merely service centre firmwares. Samsung releases many firmwares, some of which have different firmware versions, but which may essentially all be the same, to their service centres but never makes them available for users to download.
To my knowledge, there is NO "official" UK update yet (via Kies). However, if you take your phone to a service centre, they may well flash it with a newer firmware than the one you have.
----------------------
When dealing with firmwares it is very important to remember that one firmware release (one code branch) may contain 20 or 30 or more actual firmwares. This is because of network / operator branding and language files. This is why the firmwares we're seeing for the Galaxy are XXJM5, JGJM8 etc.
Samsung firmware versioning works like this:
Firmware version i9000XXJM5 means:
i9000 = Phone model
XX = Country / region (XX is generic Europe 1)
J = Year of build / release
M = Month of build / release
5 = Consecutive number (so 5th build of the JM branch)
...what is interesting is that Samsung are using month codes which are over the 12th letter in the alphabet (which is L) - this usually means the firmware is a test / beta firmware, but the fact that JM2 is available to the public via Kies counters this.
When you take all these things into account, it becomes obvious that the JG and JM builds are all essentially the same, but just with different localisations / customisations for the languages / regions / networks they were originally intended for.
I should also add that any one "firmware" is made up of three elements; the PDA (phone code), CSC (branding / localisation / applications) & modem (baseband) code. That's why you will sometimes see different version numbers for each specific part of a firmware, within the one "whole" firmware version.

mstrandbo said:
This makes me rage...
I also have an unbranded SGS (Bought from Komplett), and Kies won't give me an update in test mode or normal mode. I really want this new - official - firmware.
Maybe I need an older version of Kies...
Click to expand...
Click to collapse
What FW version are you running now? I was running JM2 from samsung-firmwares.com when I tried through Kies.

Froyo for Vodafone DE is released - SBF needed

Finally Vodafone DE released Froyo update, it's available on Motorola Software Update.
Could anybody share the SBF? Thanks a lot.

I thought, this was an OTA update?

I can see it on Motorola Software Update site (direct.motorola.com) with pdf description (Blur_Version.3.4.2.179.4.4.MB525VF360.DE.v8.pdf). Doesn't it mean that the update is also available on MSU ?

Am looking for the same for Vodafone España. Need to put official firmware on before sending the phone back to get the earpiece repaired for the second time.

Yes it is now available on msu, please upload the sbf.

Vodafone España Official Froyo sbf

German version still wanted.

Vodafone DE Defy Froyo
Hi @all,
Vodafone DE Froyo is available. My Boss did this update on Sunday over the air.
I make the retail update a few days earlier.
I want to change to Vodafone DE Froyo, but ota it is not available for me.
Can anybody share it??
THX,
Andy

I've received the Voda DE OTA update 2 days ago, my phone is not rooted (yet). If you still need the SBF please post the steps I shall execute and I try to create it. (I have been falshing my other phones only, not the defy)

To get SBF file you need to update your phone using Motorola Software Update (MSU) on PC. Copy SBF file from firmware folder in MSU installation directory right after the download phase.
Thanks for your help.

I've installed the update OTA, MSU is not downloading anything for me unfortunately

Is there still some interest in the VF.de update? We have about 60 devices in our company and I just downloaded the sbf and msu. Are both needed? I will try to upload it somewhere.

RocketChef said:
Is there still some interest in the VF.de update? We have about 60 devices in our company and I just downloaded the sbf and msu. Are both needed? I will try to upload it somewhere.
Click to expand...
Click to collapse
Yes, I'm interested, and I'm sure I'm not the only one.

http://netload.in/dateiynBbGHSOUK/J...YOVFDE_P022_A020_M002_HWp3_Service1FF.sbf.htm
There you go. Tell me if the .msu is also needed.
Edit:
Tested it myself with stock-froyo on a VF.de device (for testing). Looks like all the others now and worked fine with RSD Lite.

Thank you, downloading now.

[Q] updating galaxy s i9000 to latest Android

Hi
Please can anyone tell me how I can update my I9000 to the latest version of Android.
It currently runs Eclair with an update.
I have read heaps of stuff about Kies and I agree its useless! You have to use 3rd party apps to backup your phone!
By using the Kies reg patcher 1.8, I changed the product code to VNZ (vodafone NZ) and can now get Kies to tell me there's an update available, but when I try to update the phone I get a message saying it cannot be updated. I then tried changing it to TMU as this is what Kies tells me the existing firmware in the phone is. But I still cannot update the phone.
Does anyone have any ideas?
Cheers
Eugene

i also wanna know

LG Optimus 7 firmware update for mango

just wanna ask if anyone managed to capture the firmware update for mango for the LG optimus 7 ? i'm running RTM 7720 but cant seem to get the firmware update .

xtrememanix said:
just wanna ask if anyone managed to capture the firmware update for mango for the LG optimus 7 ? i'm running RTM 7720 but cant seem to get the firmware update .
Click to expand...
Click to collapse
I think you should roll back in order to get the firmware update.

im getting "LG update for Windows Phone" at the moment. Are you referring to this?

pujiesss said:
im getting "LG update for Windows Phone" at the moment. Are you referring to this?
Click to expand...
Click to collapse
yes thats the one

henry084 said:
I think you should roll back in order to get the firmware update.
Click to expand...
Click to collapse
So you're saying that even if i successfully upgraded to Mango (coming from the beta 2) i have to roll back to NoDo in order to upgrade the firmware, right?
Is it a guess or something certain?
p.s.: could you tell me how to roll back (i've made the backup when i installed the beta)?

enterthemax said:
So you're saying that even if i successfully upgraded to Mango (coming from the beta 2) i have to roll back to NoDo in order to upgrade the firmware, right?
Is it a guess or something certain?
p.s.: could you tell me how to roll back (i've made the backup when i installed the beta)?
Click to expand...
Click to collapse
nah . it should come with the update i believe .

xtrememanix said:
nah . it should come with the update i believe .
Click to expand...
Click to collapse
Yes, it SHOULD! I upgraded the software to mango, but the firmware remained the same...

enterthemax said:
Yes, it SHOULD! I upgraded the software to mango, but the firmware remained the same...
Click to expand...
Click to collapse
from what i'm seeing , by right you should get a LG update last . after you get all the updates to RTM . hmm .
if you didnt then i'm not sure why and hopefully someone in xda can capture the LG update and make it into a cab or something that we can easily install on our phones .

xtrememanix said:
from what i'm seeing , by right you should get a LG update last . after you get all the updates to RTM . hmm .
if you didnt then i'm not sure why and hopefully someone in xda can capture the LG update and make it into a cab or something that we can easily install on our phones .
Click to expand...
Click to collapse
i first received the final 7720 firmware build, then beta cleanup bundle, and finally the LG update which i described in this thread: http://forum.xda-developers.com/showthread.php?t=1279975

Can anyone post up their updated phones firmware version numbers and also what your fps are on the fish tank test.
I got an LG update message from Zune and updated my phone from Mango RTM but the version numbers stayed the same?
Sent from my Mango

I would love for someone to do this, as I'm unable to install the "LG Update" (error 801812dc) with no known solutions.

i saw on some forum and users are reporting that their firmware version got updated to 1.0.6.10

about page
os ver 7.10.7720.68
firmware rev # 1.0.6.10
hw rev # 1.0.0.0
radio software 1.0.6.10
radio hardware 0.3.5.0
bootloader 1.5.1.0
chip soc 0.30.2.0
after mango update. updated from rtm without having to downgrade. after update compass working, internet connection sharing enabled by default
phone is open-sea
bluetooth is still ****.

Wait you're saying that you can use InternetSharing on you LG Optimus7??? Screenshot or anything that proofs it?!
Kind regards

I got the LG update but my version numbers all stayed the same after the update?
os ver 7.10.7720.68
firmware rev # 1.1.2.10
radio software 1.1.2.10
rdio hardware 0.3.5.0
bootloader 1.5.1.0
chip soc 0.30.2.0

mickfarr said:
I got the LG update but my version numbers all stayed the same after the update?
os ver 7.10.7720.68
firmware rev # 1.1.2.10
radio software 1.1.2.10
rdio hardware 0.3.5.0
bootloader 1.5.1.0
chip soc 0.30.2.0
Click to expand...
Click to collapse
before update i'm pretty sure that your fw number was 1.0.2.10

borich said:
before update i'm pretty sure that your fw number was 1.0.2.10
Click to expand...
Click to collapse
I took a photo of the phone's firmware before the LG update and I'm pretty sure it was 1.1.2.10
I can't check at the moment as I'm in the office but I'll have another look when I get home later.
EDIT: I'm back home and have checked the photo again and your right the firmware was 1.0.2.10 so it did get updated, guess I shouldn't have had those beers last night :-D

oh man . mine is still running 1.0.1.10 . which is like ancient . Z

bevoc said:
os ver 7.10.7720.68
bluetooth is still ****.
Click to expand...
Click to collapse
YES. I love the Optimus 7 exceept bluetooth. My blackberry has 10000x better bluetooth.

Ugh, I'd really love for someone to either grab the files and put them in a cab with instructions, or tell me how to do it. Otherwise, I'm going to have to send my phone back to the manufacturers to be fixed.