Referring to the outer lens cover on the evo, I haven't heard if anyone doing what we did with the tilt 2, we simply remove the scratched cover and don't replace it with anything.
On the tilt 2 the lens cover was built into to battery door and you simply removed the door then popped the little plastic cover out and your pix were as good as new.
The scratched cover made a big difference on the tilt 2, to someone who is picky, and this completely solved the issue.
So what exactly does this cover do on the evo and is it as important as we think it is?
Sent from my PC36100 using XDA App
It's part of the evo's back case half, instead of the battery door. I guess you could remove it, but I'd be worried about dirt getting inside the phone. Personally I'd try to replace it with something instead of leaving it off completely. One of the Chinese bargain sites (either dealextreme or kaidomain, can't remember which) sells glass lenses in various sizes for flashlights. If you could get lucky enough for them to have one the same diameter, you could remove the old scratched/broken lens and replace it with one of those.
On the other hand, if it's just scratched, you could get some cerium oxide (optical grade glass polish) and polish the scratches out.
Related
so i just noticed that the camera was taking bad pix so i pulled the battyery cover off to see if i needed to clean the lens or the lens cover, upon observing the battyer cover i noticed that it has many many small scratches.
so the way i see it is that i have a few options and i was looking to discuss my optopns.
i could:
1 replace the entire battery cover
2 knock the lens cover out of the battery cover, im afaraid this could lead to a scratched lens
3 replacded just the lens cover
what do you guys/gals think?
btw this is my first ever post on xda and this site is freaking sweet
thanks
Just pop out the lense cover,i did it in mine and the camera quality is 100% better and dont worry bout scratchin the glass camera lens, its tougher cause of bein glass vs plastic, n its recessed pretty good. q-tips cleane it well
Yeah, there was a thread about the back cover going a bit ago. General consensus was just to pop it out and occasionally get in there to clean off the lense.
very good, i was sitting in my gf's sons high school graduation ceremony using my tilt 2 so my spelling and grammer weren't the best in my op
i probably should have researched a little more but it was all i could do keep connecting to the internet long enough to get that op sent...
but fantastic input, infact i went ahead and popped the little guy out, but i know i should be ok with this fix
When I got the phone I cut a little piece of screen protector and put in on the lens cover. Didn't seem to impact photo quality, but I guess I have nothing to compare to since it's been there since day one.
Just FYI if you end up replacing the lens cover.
I too popped out the lens cover, soon after purchasing the TILT2 because even brand new the lens covers take away from the pictures, had same problem on TILT 1 so instead of taking off my cover everytime i wanted to take a picture i just removed the lens cover and it's been great , no damage. A little dusty every once in awhile , but nothing major. plus you could keep the cover and pt it back on later if you change your mind !
I notice on mine that the coating (maybe an anti-glare coating) on the outside was just worn away in spots. At first I too thought the plastic was scratched, but it wasn't. I took some plastic polish (I assume toothpaste would work too) and polished away the rest of the anti-glare coating. That greatly improved the picture quality.
Mine gets used in dusty and dirty conditions too often. Not sure I dare pop off that protective layer.
buff it
potna said:
so i just noticed that the camera was taking bad pix so i pulled the battyery cover off to see if i needed to clean the lens or the lens cover, upon observing the battyer cover i noticed that it has many many small scratches.
so the way i see it is that i have a few options and i was looking to discuss my optopns.
i could:
1 replace the entire battery cover
2 knock the lens cover out of the battery cover, im afaraid this could lead to a scratched lens
3 replacded just the lens cover
what do you guys/gals think?
btw this is my first ever post on xda and this site is freaking sweet
thanks
Click to expand...
Click to collapse
lol, this is where messing with cars comes in handy,, go get the smallest bottle of car polish(not wax)you can find and just buff the scratches out. use a very light touch and the scratches come right out. due to my work enviorment, i had to do mine last week when i noticed the same thing, and now i am back to crystal clear pictures again
Thanks, snig72. I had an old tube of car scratch removal stuff and tried your suggestion. I used a q-tip with it and it worked like a charm! The cover is like brand new now - not kidding!
I assume the piece of glass exposed on the back of the phone is not the actual lens and i just a glass cover. Is it possible to replace this? And is there any good cover to protect it? I just noticed there's already several scratches on the glass. Was wondering if i could easily replace it and also if there was something i could do to protect in the future.
I'd prefer not getting a whole case if possible.
I believe it is a plastic cover, and I have seen replacment ones for sale on the internet, they are a plastic circle with a black ring printed on it.
I believe the price was somewhat high for what it is, like $15-20.
thanks, i think i found it:
http://cgi.ebay.com/Sprint-HTC-Evo-...665?pt=LH_DefaultDomain_0&hash=item45f62a96c1
Mines broke and it's glass not plastic. I think the replacements are plastic.
Sent while sitting on the toilet.
I read somewhere that you can go somewhere that processes camera film and get some used disposable cameras for free, and that the lenses from those will fit perfect on the evo. There was a wright up on it i think here at xda.
Rather then rip off another forum , I'd though I'd post the link here :
http://androidforums.com/desire-tip...mera-picture-video-quality-4.html#post1947239
In short: all you do is remove the cheep plastic cover from your case that goes over the lens.
I tried it and it has improved my pictures / vids , the problem the other forum are now trying to work is what to replace the cheep plastic cover with ?
Some folk have paid about 25 GBP for glass... mmmmm
I took the cover off mine and now it is exposed
However I think the extended battery and case from mobile fun may work as it has an entire new back case and camera cap
May work as it is an entire new case
Sent from my HTC Desire using XDA App
I just cleaned the plastic cover with soap. It turned out there was a layer of dirt covering the lens cover since new (can still see some of the stains but not directly over the camera) and now I can barely tell the difference
The dirt was probably glue residue from case assembly process.
I done this about three months ago and am still getting amazing pictures, the plastic bit had quite a few light scratches on it so the pictures were coming out with a soft focus effect rather than being sharp and vibrant. I was concerned that the camera was exposed but the actual lense sits quite deep in the case so it is fairly safe imo. I've been using it like this for about three or four months and all is still good
Sent from my HTC Desire using Tapatalk
Hi all,
I'm into photography and the lens is one of the most precious component in my galaxy note.
Has anyone came across a case/battery case/add-on that has a lens cover? I'm particulary after a sliding lens cover. I don't really want to put screen protector in front of the lens as it'll affect photo quality.
If you've seen any.. please provide links.. thanks
FYI, I've googled.. with no luck
cheers
Lens protector
Here's my solution. Might not be the prettiest. If you find a circular piece of rubbery sticker or something simmilar it might be even better. Doesn't even need to be this thick. Doesn't even need to be out of rubber. I just like the extra friction when I lay my phone on the desk.
I hated the idea, that the phone rests on the lens when I put it down.
What do you think?
I found similar solution like @vgergo but you dont need to destroy battery cover. I ordered leather back battery cover from ebay, it is a bit ticker than original one and it provides arround 1mm edge arround lens so it is protected when putting your phone down. Back is nice finnished and it fits as it should so I can reccomend it.
where can i buy some sort of screen protector or sticker for the rear camera? i don't have the plastic on it anymore and i don't like the idea how it's protectionless. For my Galaxy Note 4, the plastic fell off recently somehow and I was barely able to cover it using a spare screen protector, but it didn't stick well.
If i can't find anything for this phone , im thinking of either using tape or stickers from the dollar store or walmart.
imeem said:
where can i buy some sort of screen protector or sticker for the rear camera? i don't have the plastic on it anymore and i don't like the idea how it's protectionless. For my Galaxy Note 4, the plastic fell off recently somehow and I was barely able to cover it using a spare screen protector, but it didn't stick well.
If i can't find anything for this phone , im thinking of either using tape or stickers from the dollar store or walmart.
Click to expand...
Click to collapse
Lol...I did tape/ plastic wrap but left a glare. Here are are some that I use. That I found. Not same seller, but same product.... https://www.ebay.com/i/292285497735...4%26rvr_ts%3Db7eddc1c1680ab66a6c2162afff9a3ea
..or there is this kind, replacement part.... https://www.ebay.com/i/323435566146...2%26rvr_ts%3Db7f44f4e1680a688b7b2417ffff9bf1e
Mysticblaze347 said:
Lol...I did tape/ plastic wrap but left a glare. Here are are some that I use. That I found. Not same seller, but same product.... https://www.ebay.com/i/292285497735...4%26rvr_ts%3Db7eddc1c1680ab66a6c2162afff9a3ea
..or there is this kind, replacement part.... https://www.ebay.com/i/323435566146...2%26rvr_ts%3Db7f44f4e1680a688b7b2417ffff9bf1e
Click to expand...
Click to collapse
Right now, I taped the glass part of the camera and cut out wholes for the camera lens, so it doesn't affect the quality lol. very getto but it seems to work, but i'm 1/4 finished. I did this to my Note 4 too yesterday.
https://imgur.com/a/3fzBdBg
for your first link, I don''t really like the idea how with the camera glass, it still means that the lens is ****ting the surface first and putting the pressure on it. in your opinion, how scratch resistant is it and does it affect the camera quality? I wish they made one like that but inverse so it covers everything but the lenses itself .
I might buy the dbrand camera skin, it seems to be what i'm looking for.