Develop Bugs

how can i know if my tytn lock for updates

how can i know if my tytn lock for updates

liors111 said:
how can i know if my tytn lock for updates
Click to expand...
Click to collapse
that doesn't even make sense...
why not just post the question "AAAA, AAAAAAA AAA AAAA AA AAA - AAAAA!?!"

It's easy.. Just tie the phone to your front door and, using a sharpie (permanent ink marker), write "UPDATE" on the screen. Leave for a few hours, and see if it's still there. If it is, is was LOCKED for UPDATE.
Hope that helps!

very fanny
ha ha ha
i cant update the tytn
i get error that why i need to know if it lock for update

You are not very descriptive and it was hard to understand what your problem is, that (and the fact that your english is not on high level) lead to such a behavior of some senior members here. Please provide more details if you wish to get some help from others. You should at least tell them:
What is the version of bootloader (SPL) you are using,
What OS you use - which version (WM5, WM6), or version number
What Radio you are using,
And what did you try to upgrade and what was the error, when did it happen and so on.
People here have lots of knowledge of Hermes, but they are not mind-readers. Try to be as descriptive as possible and there is high possibility someone will help you. If you are afraid you can not express what is your problem in english ask some of people here that are from your country to translate your questions to english. Good luck!

.) what kind of error exactly?
.) which rom did you use?
.) did you follow all the steps in this guide exactly? http://www.mrvanx.org/hermes_guide/

What is the version of bootloader (SPL) you are using, =
1.08
What OS you use - which version (WM5, WM6), or version number :1.18.255.106
What Radio you are using,
1.03.03.10
And what did you try to upgrade and what was the error, when did it happen and so on.
it not connect with the mobile it frezze the update

First you should upgrade your bootloader according to this guide:
http://www.mrvanx.org/hermes_guide/HardSPL.html
Then you can try to flash either radio or rom or both - have a look at this guides I mentioned before.
But as english is not your mother tongue I guess its better to find somebody here in the Forums who is speaking your language and ask him/her for help.

gerald_s said:
First you should upgrade your bootloader according to this guide:
http://www.mrvanx.org/hermes_guide/HardSPL.html
Then you can try to flash either radio or rom or both - have a look at this guides I mentioned before.
But as english is not your mother tongue I guess its better to find somebody here in the Forums who is speaking your language and ask him/her for help.
Click to expand...
Click to collapse
t.y very much
i update the rom and it seem to be ok

liors111 said:
t.y very much
i update the rom and it seem to be ok
Click to expand...
Click to collapse
If you want to eliminate potential communiaction problems and misunderstanding you can edit your signature to provide details about your device. What you are using will be clearly visible so troubleshooting of any potential problems will be easier. Most important info is: device name (TyTn, Trinity...), OS version/name, Radio version and Bootloader (SPL) version. Good luck flashing!

ok i get it now
i upgrate to pro black 2
it seen to running very fast
but i have problam to surf with the wifi
i connect to the wifi router
but i get error in MIE (the page cannot be displayed or downloaded becasuse the connection was lost....)
alsp i want to know were to edit home page in the MIE?
reg.
lior

liors111 said:
alsp i want to know were to edit home page in the MIE?
Click to expand...
Click to collapse
You can edit your homepage in menu>>tools>>options>>general tab in Pocket Internet Explorer.

Help! How to install Android on my Touch Pro 2?

== MOD EDIT ==
please check stickY
== END EDIT ==
Hi there,
First of all! Great forum! You guys have build a great community and I like it. But I hope you can help me with this. i know there are a lot of threads about this, but because all the different type of phones/android versions ect... I don't know what to do...
My question, how can I get Adroid running on my HTC Touch Pro 2 (Rhodium). I have the standart version, so not a branded one.
I've tried to install it but android won't launch. Maby one of you could create a mini tutorial or a noob tutorial, because I think there are more people like me (with less knowedge of phone tech) who want to run android on their phones. I hope you could help me!
Thanks!
Kind Regards,
Sami

http://forum.xda-developers.com/showthread.php?t=627997
Rhodium XDAndroid Rebuild .CAB WWE(02/24):
Please download the appropriate .cab for your device!
Rhodium/Touch Pro 2 Android .cab:
Rhod210 Download
Tilt2 Android .cab:
Tilt2 Download
NEW: Rhod100 fr/uk/de Android .cab:
Rhod100 Download
Instructions for .cab:
Cab is only WWE for the moment. If you still want to try this build skip down to the .rar for any other language.
If you are installing this over an old version of android, and you do not format your SD card, make sure that you at least delete data.img file from your SD card!
Copy to SD card
Install: This .cab does install directly to your SD card.
Soft Reset your handset
Run Haret from start menu and enjoy!
Click to expand...
Click to collapse
how could it be simpler?
Samich2007 said:
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.

where do u dl haret.its mentioned but theres no dl link

cdiesel said:
where do u dl haret.its mentioned but theres no dl link
Click to expand...
Click to collapse
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.

Reefermattness said:
Haret is part of the android program. (haret.exe)
You can either use a file explorer to navigate to storage card/android/haret
or with the .cab installs (anything after 2/22) you will get an icon in your start menu.
Click to expand...
Click to collapse
yea thanks i did a little digging and was finally able to understand that

i dont know why posts like this are started. its so easy to use this perfect cab file! nothing else to do. if people would read just 10 minutes in other threads all questions should be answered...

how could it be simpler?
Quote:
Originally Posted by Samich2007 View Post
I have the standart version, so not a branded one.
Click to expand...
Click to collapse
so download the rhod100 and run it.
Click to expand...
Click to collapse
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami

Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
Disable your pin in WinMo as stated in my release notes.

Samich2007 said:
Hi Thanks I've used that thread but used the wrong cab. Didn't know that rhod100 is the standart version
Thank you! It works now, but is it a known problem that you cant fill in the correct code (PIN code for your SIM?).
And second I can't charge my battery with the usb cable is this also a known problem?
Thanks
Regards!
Sami
Click to expand...
Click to collapse
as mentioned above
read the XXXX manual before posting...
edit:
ok Reefermattness was faster again
Mod Edit: Keep language clean juniors use XDA, also sometimes best to say nothing........

Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?

Samich2007 said:
Oké thanks
Works, xD I will read better next time,
And is there a version from android that can enable the wifi on the touch pro 2?
Click to expand...
Click to collapse
next question which could be answered in minutes reading other posts...
NO there is no android version with working wifi for rhodium yet...

Oké i'm sorry... Hope it will be availible soon.

Samich2007 said:
Oké i'm sorry... Hope it will be availible soon.
Click to expand...
Click to collapse
To prevent spam to the forums, new users are not permitted to post outside links in their messages. All new user accounts will be verified by moderators before this restriction is removed.

I have Android installed on my phone and it works fine except one MAJOR thing. I messed up the touch screen calibration and now I can't use the touch screen in android and I cant figure out how to recal the touch screen in android.
Got it. i just deleted the ts calibration file from the android project folder and started android again.

lhwparis said:
as mentioned above
read the ****ing manual before posting...
edit:
ok Reefermattness was faster again
Click to expand...
Click to collapse
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?

delete all the contents from the .cab file you downloaded, make sure your memory card has wiped any remaining files from the original download, re-install and make sure you are downloading the correct .cab file for your handset, install to memory card and try again.

Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already. Stop treating people like idiots. Help them or stop reading the thread. Someone else will help them out. It's not that serious. I can tell you one problem here that I encountered was a thread would be started and trail off into someting completely different never answering the first question. After reading pages upoon pages you get nothing. Some people like myself have real lives and real jobs and dont have time to sit here and read every post. If you take it so serious maybe you should sticky an informative how to guide and maybe that will stop people from bothering you so much.

gary-09 said:
Ok man maybe you can help me out with the problem im having. I go to file explorer and i launch Haret.exe and it immediately takes me to the linux booting page with the penguin at top. But it soon stops saying "Cant access tty. Job control turned off. And it doesnt move from there. What am i doing wrong?
Click to expand...
Click to collapse
Is the folder in the root of your memory card?

dutch169 said:
Yo Ihwparis chill out. This is a forum for information trading and gathering. Everyone was a noob at one time or another including you and asked questions that have been asked a million times already.
Click to expand...
Click to collapse
I was actually on XDA for about 6 months, reading, before I finally decided to even MAKE an account, because I didn't want to be "That Noob". It was about another 6 months to a year before I posted anything at all. As you said yourself, most questions have already been asked a million times. This means that it is only a matter of reading, before you find someone that has asked the same question. In most cases once you find the question, and read a little further it leads you to the answer. He was smart enough to post in the correct sub-forum, which means he must have read through the forums a bit anyways. It wouldn't have taken much more work to read the top 3 sticky threads in that same sub-forum, and find the answer to the question.

I can get the whole thing to load however I cannot ever get the start screen (touch the androind to start) to ever let me touch it. The only thing that works is the keyboard input. Any suggestions?

HELP!! How can i install operating system on my phone? Demo Version finished

Hi, I bought a HTC touch pro 2 phone a couple months back with windows mobile 6.5 on the phone and today i woke up to find that the operating system was some beta version and that it has run out so now the phone is not working. There is no information anywhere what to do.
I have tryed going on the htc site and downloading software but when i put the serial number in it says that it is not suitable
How can i install an operating system that will work or even get this version to work
Any help would be apprecitated

What an incredibly weird problem.
Your best bet* is to go to your carrier's website (rather than HTC's) and download their most current ROM.
Alternatively, you could download one of hundreds of custom ROMs here or on other sites. Just make sure you use a GSM ROM if you have a GSM phone or a CDMA ROM if you have a CDMA phone.
*Many are going to insist that a custom ROM is your best bet. Since you don't seem to be very familiar with these concepts I really think a stock ROM from your carrier is the best place to start in order to get your phone working again.

dazzyweb said:
Hi, I bought a HTC touch pro 2 phone a couple months back with windows mobile 6.5 on the phone and today i woke up to find that the operating system was some beta version and that it has run out so now the phone is not working. There is no information anywhere what to do.
I have tryed going on the htc site and downloading software but when i put the serial number in it says that it is not suitable
How can i install an operating system that will work or even get this version to work
Any help would be apprecitated
Click to expand...
Click to collapse
What model of the TP2 is it, where did you buy it, and what carrier are you using it on?
EDIT: I'm guessing I already know the answer to the 2nd question

sirphunkee said:
What model of the TP2 is it, where did you buy it, and what carrier are you using it on?
EDIT: I'm guessing I already know the answer to the 2nd question
Click to expand...
Click to collapse
It sounds like you bought a used phone that someone had put a custom rom on. Ive heard people discuss in the NRG Rom thread that some of the roms previous to April 1st would expire on the first of may. This sounds all too similar.
My advice... flash a new rom. Especially if you DID but the phone used. That's like what is going on. Do some reading in the Rom sub forum and you'll see what I'm talking. find the NRG Rom thread and search "expiration" or something.
Hope this helps some!

Hi, It expired on the 1st may so i guess that might be what the problem is. How can i instal i new rom? and where can i get this information. Do you have any links?
Thanks

dazzyweb said:
Hi, It expired on the 1st may so i guess that might be what the problem is. How can i instal i new rom? and where can i get this information. Do you have any links?
Thanks
Click to expand...
Click to collapse
Thats a big question that you're best just doing some reading on and if you have questions as in those threads.
The thread's you want to read are here ---->Touch Pro2, Tilt 2 Windows Mobile ROM Development
Read through those threads that are at the very top with "Sticky" next to them. All the threads below are rom related threads about certain roms availabe to install etc.

[Q] Anyone got the 7003 build installer

Hi,
I have a samsung developer phone, but the installed build is 6419. I don't have direct access to the connect directory, so I was wondering if anyone has the latest installable build? Pst or post a reply if you got any info

Just take the image from THIS.

How can I use that to flash the phone?

You probably need a driver + some weird booting key-press combination on the phone (it changes from phone to phone) before you can do it

It's the Samsung developer phone, no idea what is used to flash that one.

hello,
I have a similar question. I am using a developer build htc spark with a 6527 build version.
Noticing lately many of the new apps not installing or working correctly. Im pretty sure its the old build version. Any help updating to the current prod version is appreciated.
Unfortunately dont have access to connect either.
thank you

I'm guessing y'all are really developers then???

nrfitchett4 said:
I'm guessing y'all are really developers then???
Click to expand...
Click to collapse
Thanks
But I don't have access to the Windows Phone directory on connect. And that is where the update is located..

This thread will be moved and / or closed.
You posted in: Windows Phone 7 Development and Hacking > Windows Phone 7 Development and Hacking
And the place would be: Windows Phone 7 Development and Hacking > Windows Phone 7 General
Please note the guidelines for this forum:
General Rules for the WP7 Development forums - MUST READ BEFORE POSTING!
At first, this is a warning. No need Report Post on this Thread.
Thank you for supporting XDA

HOT HD9 (HTC HD2 copy)

Hello everyone.
I got these cell phone and I need help for the SW and the other things that are needed for this device.
Does anyone have this phone, I need help?

Canelis said:
Hello everyone.
I got these cell phone and I need help for the SW and the other things that are needed for this device.
Does anyone have this phone, I need help?
Click to expand...
Click to collapse
Not heard of this device. Perhaps a chinese copy of HD2.
OK, found something. It runs on Android, so you can only run Android apps. BTW what exactly you mean when you say things needed?

Need to se is it last SW, and need GPS for this phone.CoPilot Live- not work on this device !!

Canelis said:
Need to se is it last SW, and need GPS for this phone.CoPilot Live- not work on this device !!
Click to expand...
Click to collapse
It runs 2.2 (as mentioned on the web), I don't have any idea if it can be upgraded, as you may know 2.2 isn't the latest version.
For GPS, you can check its specs if it has GPS or not, if yes then you can install the apps from the market otherwise perhaps connect an external GPS, although I am not sure weather an external will work or not.
You can click on 'Thanks' button, if I helped.

Model number : T8585
Android version: 2.3.4
Based Version : MAUI.11AMD.W11.19.SP.V1,2011/6/23 00:50
Need "working" GPS !!!!!!!

Maybe it could help us to help you if you could post the link.
The chinese website where I saw this, mentioned Android 2.2.

Many app not work on this mobile !

Maybe this will help : - h**p://www.efox-shop.com/hd9-mtk6573-4-3-zoll-kapazitiver-touchscreen-handy-wlan-umts-android-2-2-gps-dual-kamera-dual-sim-bluetooth-p-236121

since it is running android, so the compatible android apps should run on it, but since its a Chinese clone, no guarantees.
You can trying looking at other android phones by HTC or some other brand, to be safe.

You can try this rom Update_HD2_3G.zip www.multiupload.com/XOVS2HZTHO to remove all chinese aplications and to improve everything.
forum.china-iphone.ru/viewtopic.php?f=22&t=15521
Installation Guide
http://forum.xda-developers.com/showthread.php?t=1423489
For fix GPS:
Enter *#*#3646633#*#*
Go to YGPS
Wait for the green satellites appear.
Go to NMEA Log
Click "save" wait 5 minutes and then click "stop". Repeat the process after 1 hour.

Is your cellphone the same of this?
fastcardtech.com/goods.php?u=41964&id=6655
I bought 1 of them.

Now HTC mobile phone is also very popular in China. But i am sorry i don't have it. It is a little expensive.

Is it upgradable to ICS???

.
Thread moved. Would advise you to read forum rules and post in correct section.